Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. E. Gibson, A. V. Aleksandrov, M. M. Champion, G. W. Dodson, J. P. Schubert, and J. Y. Tang, “Resonance Control Cooling System Performance and Developments”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE038, pp. 2541-2543.
[n] L. Moseiko, N. Moseiko, and A. Shirokov, “INTELLECTUAL CRATE-CONTROLLER K167”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH07, pp. XX-XX.
[n] K. Cornelis, L. Evans, A. Faugier, A. Hilaire, and R. Schmidt, “Operation of the SPPS Separation Scheme”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 133-136.
[n] R. Dawson, K. Erdman, B. Milton, and N. Stevenson, “Operation of the TR30 Industrial" Cyclotron"”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1733-1735.
[n] M. Tomut and C. L. Hubert, “Understanding Ion Induced Radiation Damage in Target Materials”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3C06, pp. 476-478.
[n] M. van Rooij et al., “The Vacuum Upgrade of the CERN PS and PS Booster”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP15, pp. 2069-2071.
[n] N. van Gils et al., “Electron beam scattering in rubidium vapour at AWAKE”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS010, unpublished.
[n] C. R. Prokop, P. Piot, M. D. Church, and Y.-E. Sun, “Longitudinal Phase Space Measurement for the Advanced Superconducting Test Accelerator Photoinjector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR034, pp. 3009-3011.
[n] W. Busse, “Advantages and Constraints of Modern Accelerator Control Systems”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper FI-02, pp. 555-558.
[n] T. Ilg, D. Liska, P. Smith, L. Carlisle, S. Ellis, and G. McCauley, “Special Design Problems and Solutions for High Powered Continuous Duty Linacs”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1718-1721.
[n] V. Vlachodimitropoulos, M. J. Barnes, and A. Chmielinska, “Preliminary Results from Validation Measurements of the Longitudinal Power Deposition Model for the LHC Injection Kicker Magnet”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2636-2639. doi:10.18429/JACoW-IPAC2018-WEPMK005
[n] B. Breitkreutz, R. Greven, N. Shurkhno, R. Stassen, and H. Stockhorst, “Stochastic Cooling Hardware for Low Energy Deuterons at COSY”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2261-2263. doi:10.18429/JACoW-IPAC2017-TUPVA080
[n] K. Fukami et al., “Ejected Beam Emittance of the SPring-8 Booster Synchrotron”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI114, pp. 1888-1890.
[n] W. C. Barry, “Suppression of Propagating TE Modes in the FNAL Antiproton Source Stochastic Beam Cooling System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2424-2427.
[n] D. Fernandez-Ca?âoto, F. J. Bermejo, I. Bustinduy, J. Feuchtwanger, J. L. Munoz, and D. de Cos, “Electrode Design of the ESS-Bilbao Accelerator Proton Extraction System”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD37, pp. 144-148.
[n] C. S. Hopper, J. R. Delayen, and R. G. Olave, “Superconducting Single-spoke Cavities for High-velocity Applications”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO079, pp. 2480-2482.
[n] R. C. Gupta, M. Anerella, J. P. Cozzolino, A. K. Jain, J. F. Muratore, and P. Wanderer, “Iron Shims outside the Helium Vessel to Adjust Field Quality at High Fields”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2734-2736. doi:10.18429/JACoW-IPAC2014-WEPRI101
[n] F. J. Deadrick, J. J. Barnard, T. J. Fessenden, J. W. Meredith, and J. Rintamaki, “Development of Beam Position Monitors for Heavy Ion Recirculators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB14, pp. 2557-2559.
[n] R. W. Carey et al., “Status of the use of Large-Scale CORBA Distributed Software Framework for NIF Controls”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O2_001.
[n] T. Kanayawa, S. Koseki, H. Kubo, and M. Kumada, “High Performance Active Filter for the Power Supply of the HIMAC Synchrotron Magnet”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP100G, pp. 2358-2360.
[n] R. B. Appleby et al., “Low Energy Beam Tracking Under Scattering for a Cold Electron Source in Manchester”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2615-2617. doi:10.18429/JACoW-IPAC2015-WEPWA049
[n] G. LeMeur and F. Touze, “PRIAM/ANTIGONC:Documents and SettingsSaraMy DocumentsPAC Work a 2D/3D Package for Acclerator Design”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1321-1324.
[n] P. Plascjak et al., “The Operational Status of the National Institutes of Health Cyclotron Complex”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-25, pp. 685-688.
[n] B. N. Kosciuk, A. Blednykh, and S. Seletskiy, “Construction and Operational Performance of a Horizontally Adjustable Beam Profile Monitor at NSLS-II”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF07, pp. 55-58.
[n] R. M. Caliari et al., “Studies on Flow-Induced Vibrations for the New High-Dynamics DCM for Sirius”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 8-11. doi:10.18429/JACoW-MEDSI2016-MOPE02
[n] S. Herb and J. Kirchgessner, “Operation of CESR with Permanent Magnet Interactioin Region Quadrupoles”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 130-133.
[n] B. Autin, G. Carron, F. Caspers, S. Milner, L. Thorndahl, and S. van der Meer, “ACOL Stochastic Cooling Systems”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1549-1552.
[n] W. F. Bergan, A. C. Bartnik, I. V. Bazarov, H. He, D. L. Rubin, and J. P. Sethna, “Minimization of Emittance at the Cornell Electron Storage Ring With Sloppy Models”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 402-404. doi:10.18429/JACoW-NAPAC2016-TUPOA58
[n] S. Eylon et al., “Initial Commissioning Results of the RTA Injector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA3, pp. 3390-3392.
[n] G. Atoian, A. Zelenski, A. Bogdanov, M. F. Runtso, and E. J. Stephenson, “Precision, Absolute Proton Beam Polarization Measurements at 200 MeV Beam”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP190, pp. 444-446.
[n] F. Marti et al., “Invited Paper: Beam Diagnostic Developments at NSCL”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-01, pp. 268-277.
[n] F. Varela, M. Gonzalez-Berges, and N. Lurkin, “Reusing the Knowledge from the LHC Experiments to Implement the NA62 Run Control”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC064, pp. 725-728.
[n] K. Furuya et al., “Positive-ion Multi-turn Injection with Bi-Waveform Fast Orbit-Bump Magnets”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP083G, pp. 2444-2446.
[n] S. S. Cao, J. Chen, L. W. Lai, Y. B. Leng, and N. Zhang, “Beam Arrival Time Analisis Based on CBPM at DCLS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4023-4025. doi:10.18429/JACoW-IPAC2017-THPAB128
[n] M. Fakhari, K. Floettmann, S. Pfeiffer, H. Schlarb, and J. Rossbach, “Design of a Normal Conducting Cavity for Arrival Time Stabilization at FLASH”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2818-2821. doi:10.18429/JACoW-IPAC2015-WEPMA029
[n] S. Sytova, “VOLC: Volume Free Electron Laser Simulation Code”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH003, pp. 14-17.
[n] P. R. Cameron, M. C. Grau, M. Morvillo, T. J. Shea, and R. E. Sikora, “RHIC Beam Position Monitor Characterization”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ05, pp. 2458-2460.
[n] C. P. Manin, E. J. Bond, A. D. Casey, R. D. Clark, and G. W. Norman, “Streamlining the Target Fabrication Request at the National Ignition Facility”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 176-179. doi:10.18429/JACoW-ICALEPCS2017-TUBPL04
[n] C. Boyer et al., “Thirty Meter Telescope Adaptive Optics Computing Challenges”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MODAULT01, pp. 36-39.
[n] S. Schulz et al., “Few-Femtosecond Facility-Wide Synchronization of the European XFEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 318-321. doi:10.18429/JACoW-FEL2019-WEB04
For LaTeX
Use Complete Form
For BibTeX
References
- P. E. Gibson, A. V. Aleksandrov, M. M. Champion, G. W. Dodson, J. P. Schubert, and J. Y. Tang, “Resonance Control Cooling System Performance and Developments”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE038, pp. 2541-2543.
- L. Moseiko, N. Moseiko, and A. Shirokov, “INTELLECTUAL CRATE-CONTROLLER K167”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH07, pp. XX-XX.
- K. Cornelis, L. Evans, A. Faugier, A. Hilaire, and R. Schmidt, “Operation of the SPPS Separation Scheme”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 133-136.
- R. Dawson, K. Erdman, B. Milton, and N. Stevenson, “Operation of the TR30 Industrial" Cyclotron"”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1733-1735.
- M. Tomut and C. L. Hubert, “Understanding Ion Induced Radiation Damage in Target Materials”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO3C06, pp. 476-478.
- M. van Rooij et al., “The Vacuum Upgrade of the CERN PS and PS Booster”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP15, pp. 2069-2071.
- N. van Gils et al., “Electron beam scattering in rubidium vapour at AWAKE”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS010, this conference.
- C. R. Prokop, P. Piot, M. D. Church, and Y.-E. Sun, “Longitudinal Phase Space Measurement for the Advanced Superconducting Test Accelerator Photoinjector”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR034, pp. 3009-3011.
- W. Busse, “Advantages and Constraints of Modern Accelerator Control Systems”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper FI-02, pp. 555-558.
- T. Ilg, D. Liska, P. Smith, L. Carlisle, S. Ellis, and G. McCauley, “Special Design Problems and Solutions for High Powered Continuous Duty Linacs”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1718-1721.
- V. Vlachodimitropoulos, M. J. Barnes, and A. Chmielinska, “Preliminary Results from Validation Measurements of the Longitudinal Power Deposition Model for the LHC Injection Kicker Magnet”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2636-2639.
- B. Breitkreutz, R. Greven, N. Shurkhno, R. Stassen, and H. Stockhorst, “Stochastic Cooling Hardware for Low Energy Deuterons at COSY”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2261-2263.
- K. Fukami et al., “Ejected Beam Emittance of the SPring-8 Booster Synchrotron”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI114, pp. 1888-1890.
- W. C. Barry, “Suppression of Propagating TE Modes in the FNAL Antiproton Source Stochastic Beam Cooling System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2424-2427.
- D. Fernandez-Ca?âoto, F. J. Bermejo, I. Bustinduy, J. Feuchtwanger, J. L. Munoz, and D. de Cos, “Electrode Design of the ESS-Bilbao Accelerator Proton Extraction System”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD37, pp. 144-148.
- C. S. Hopper, J. R. Delayen, and R. G. Olave, “Superconducting Single-spoke Cavities for High-velocity Applications”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO079, pp. 2480-2482.
- R. C. Gupta, M. Anerella, J. P. Cozzolino, A. K. Jain, J. F. Muratore, and P. Wanderer, “Iron Shims outside the Helium Vessel to Adjust Field Quality at High Fields”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2734-2736.
- F. J. Deadrick, J. J. Barnard, T. J. Fessenden, J. W. Meredith, and J. Rintamaki, “Development of Beam Position Monitors for Heavy Ion Recirculators”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPB14, pp. 2557-2559.
- R. W. Carey et al., “Status of the use of Large-Scale CORBA Distributed Software Framework for NIF Controls”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O2_001.
- T. Kanayawa, S. Koseki, H. Kubo, and M. Kumada, “High Performance Active Filter for the Power Supply of the HIMAC Synchrotron Magnet”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP100G, pp. 2358-2360.
- R. B. Appleby et al., “Low Energy Beam Tracking Under Scattering for a Cold Electron Source in Manchester”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2615-2617.
- G. LeMeur and F. Touze, “PRIAM/ANTIGONC:Documents and SettingsSaraMy DocumentsPAC Work a 2D/3D Package for Acclerator Design”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1321-1324.
- P. Plascjak et al., “The Operational Status of the National Institutes of Health Cyclotron Complex”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-25, pp. 685-688.
- B. N. Kosciuk, A. Blednykh, and S. Seletskiy, “Construction and Operational Performance of a Horizontally Adjustable Beam Profile Monitor at NSLS-II”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPF07, pp. 55-58.
- R. M. Caliari et al., “Studies on Flow-Induced Vibrations for the New High-Dynamics DCM for Sirius”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 8-11.
- S. Herb and J. Kirchgessner, “Operation of CESR with Permanent Magnet Interactioin Region Quadrupoles”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 130-133.
- B. Autin, G. Carron, F. Caspers, S. Milner, L. Thorndahl, and S. van der Meer, “ACOL Stochastic Cooling Systems”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1549-1552.
- W. F. Bergan, A. C. Bartnik, I. V. Bazarov, H. He, D. L. Rubin, and J. P. Sethna, “Minimization of Emittance at the Cornell Electron Storage Ring With Sloppy Models”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 402-404.
- S. Eylon et al., “Initial Commissioning Results of the RTA Injector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA3, pp. 3390-3392.
- G. Atoian, A. Zelenski, A. Bogdanov, M. F. Runtso, and E. J. Stephenson, “Precision, Absolute Proton Beam Polarization Measurements at 200 MeV Beam”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP190, pp. 444-446.
- F. Marti et al., “Invited Paper: Beam Diagnostic Developments at NSCL”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F5-01, pp. 268-277.
- F. Varela, M. Gonzalez-Berges, and N. Lurkin, “Reusing the Knowledge from the LHC Experiments to Implement the NA62 Run Control”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC064, pp. 725-728.
- K. Furuya et al., “Positive-ion Multi-turn Injection with Bi-Waveform Fast Orbit-Bump Magnets”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP083G, pp. 2444-2446.
- S. S. Cao, J. Chen, L. W. Lai, Y. B. Leng, and N. Zhang, “Beam Arrival Time Analisis Based on CBPM at DCLS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4023-4025.
- M. Fakhari, K. Floettmann, S. Pfeiffer, H. Schlarb, and J. Rossbach, “Design of a Normal Conducting Cavity for Arrival Time Stabilization at FLASH”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2818-2821.
- S. Sytova, “VOLC: Volume Free Electron Laser Simulation Code”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper MOPPH003, pp. 14-17.
- P. R. Cameron, M. C. Grau, M. Morvillo, T. J. Shea, and R. E. Sikora, “RHIC Beam Position Monitor Characterization”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ05, pp. 2458-2460.
- C. P. Manin, E. J. Bond, A. D. Casey, R. D. Clark, and G. W. Norman, “Streamlining the Target Fabrication Request at the National Ignition Facility”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 176-179.
- C. Boyer et al., “Thirty Meter Telescope Adaptive Optics Computing Challenges”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MODAULT01, pp. 36-39.
- S. Schulz et al., “Few-Femtosecond Facility-Wide Synchronization of the European XFEL”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 318-321.
Back to search