Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Liu, S. Assadi, W. P. Grice, and C. D. Long, “Laser Wire Beam Profile Monitor at Spallation Neutron Source (SNS)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC061, pp. 1197-1199.
[n] L. W. Lai et al., “The Application of Direct RF Sampling System on Cavity BPM Signal Processing”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 278-280. doi:10.18429/JACoW-IBIC2017-TUPWC01
[n] D. Rogind, M. Boyes, and H. Shoaee, “SLAC LCLS-II Injector Source Controls and Early Injector Commissioning”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1340-1343. doi:10.18429/JACoW-ICALEPCS2017-THPHA002
[n] S. Varnasseri, I. Arredondo, D. Belver, P. Echevarria, and M. Eguiraun, “Test Bench Experiments for Energy Measurement and Beam Loss of ESS-Bilbao”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF26, pp. 876-878.
[n] S. A. Gavrilov and A. Feschenko, “Bunch Shape Monitors for Modern Ion Linacs”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 176-178. doi:10.18429/JACoW-IBIC2017-TUPCC12
[n] R. Costa, A. Latina, and M. Olvegaard, “PLACET3: 6D tracking through PETS and accelerating structures wakefields”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2805-2808. doi:10.18429/JACoW-IPAC2023-WEPA067
[n] G. Schmidt et al., “Study for a Frequent Injection Mode at Delta with Beam Shutters Open”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF018, pp. 2299-2301.
[n] H. J. Son, J.-W. Kim, Y. H. Park, and M. Chung, “Optical Design of the EBIS Charge Breeder System for RAON in Korea”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB30, pp. 265-267.
[n] Z. C. Chen, Y. B. Leng, Y. B. Yan, and B. P. Wang, “Correlation Analysis of Beam Diagnostic Measurements in SSRF”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR036, pp. 858-860.
[n] A. H. Botha et al., “A New Multidisciplinary Separated-Sector Cyclotron Facility”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1118-1121.
[n] J. M. Potter, “An RF Power Manifold for the Radio Frequency Quadrupole Linear Accelerator”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S3-2, pp. 138-143.
[n] A. Nassiri and L. R. Turner, “An Electromagnetic Micro-Undulator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P019, pp. 3491-3493.
[n] G. Vignola et al., “Status of SESAME”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS043, pp. 3383-3385.
[n] M. Kurz, P. Hulsmann, H. Klein, and A. Schempp, “Measurements on Iris-Structures with Rectangular Holes”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3023-3026.
[n] Y.-J. Chen and A. Paul, “Compact Proton Accelerator for Cancer Therapy”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS059, pp. 1787-1789.
[n] M. Kurz, H.-W. Glock, P. Huelsmann, and H. Klein, “Transversal Loss Factor of an RF-Focusing Iris Structure with Rectangular Holes”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 874-877.
[n] K. Seiya, S. Chaurize, C. C. Drennan, and W. Pellico, “Injection Bucket Jitter Compensation Using Phase Lock System at Fermilab Booster”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1999-2001. doi:10.18429/JACoW-IPAC2017-TUPIK116
[n] K.L.F. Bane and K. Oide, “Simulations of the Longitudinal Instability in the New SLC Damping Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAC16, pp. 3105-3108.
[n] E. Acerbi et al., “Status of the Milan Superconducting Cyclotron Project”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2126-2129.
[n] W. Brefeld and P. Gurtler, “A Bypass for Synchrotron Radiation Experiments at the Storage Ring PETRA II”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2793-2796.
[n] P. F. Tavares, L. Lin, and G. Tosin, “The LNLS Booster Synchrotron Dipole Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH017, pp. 3257-3259.
[n] C. S. Lee, Y. K. Kwon, E. Tojyo, M. Oyaizu, and S. C. Jeong, “Design of a Compact ECR Ion Source with Ku Band”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA6, pp. 1893-1895.
[n] H. S. Chang et al., “Control System Design of KIRAMS-13 Cyclotron”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP13003, pp. XX-XX.
[n] S.-W. Lee, C. Barbier, Y. Kang, A. Menshov, and J. Moss, “Design and fabrication of the waveguide Iris couplers for the Spallation Neutron Source drift tube linac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 873-875. doi:10.18429/JACoW-IPAC2023-MOPL140
[n] V. Gorbunov, M. Gratchev, V. Seleznev, and V. Yabzhanov, “Status Report on the Control System for the MMF Experimental Area”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1148-1149.
[n] D. Seal et al., “Characterisation facilities for evaluating superconducting thin films for SRF cavities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2983-2986. doi:10.18429/JACoW-IPAC2023-WEPA141
[n] D. Angal-Kalinin and G. Singh, “Beam Transfer Line for Synchrotron Radiation Source Indus-2”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE050, pp. 638-640.
[n] K. R. Kim et al., “Design of Cooling System for Resonance Control of the PEFP DTL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN061, pp. 2176-2178.
[n] V. I. Moiseev, “Ultrasound Instrumentation for Beam Diagnostics and Accelerating Structures Control”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POW017, pp. XX-XX.
[n] I. Yamane, “Present status of POP experiment of lasaer stripping at BNL”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THBY02, pp. XX-XX.
[n] H. O. Schoenauer, “An Alternative Scheme for Heavy Ion Driven Inertial Fusion”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP18H, pp. 2404-2406.
[n] J. Bigolas, M. Pachan, E. Plawski, J. Pszona, and A. Wysocka, “4 kW, 25keV Power Electron Source for Studies of Thermal Beam Effects”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2653-2655.
[n] D. M. Zhou, K. Ohmi, and K. Oide, “CSR Impedance for an Ultrarelativistic Beam moving in a Curved Trajectory”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC108, pp. 2268-2270.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Liu, S. Assadi, W. P. Grice, and C. D. Long, “Laser Wire Beam Profile Monitor at Spallation Neutron Source (SNS)”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC061, pp. 1197-1199.
- L. W. Lai et al., “The Application of Direct RF Sampling System on Cavity BPM Signal Processing”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 278-280.
- D. Rogind, M. Boyes, and H. Shoaee, “SLAC LCLS-II Injector Source Controls and Early Injector Commissioning”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1340-1343.
- S. Varnasseri, I. Arredondo, D. Belver, P. Echevarria, and M. Eguiraun, “Test Bench Experiments for Energy Measurement and Beam Loss of ESS-Bilbao”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF26, pp. 876-878.
- S. A. Gavrilov and A. Feschenko, “Bunch Shape Monitors for Modern Ion Linacs”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 176-178.
- R. Costa, A. Latina, and M. Olvegaard, “PLACET3: 6D tracking through PETS and accelerating structures wakefields”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA067, pp. 2805-2808.
- G. Schmidt et al., “Study for a Frequent Injection Mode at Delta with Beam Shutters Open”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF018, pp. 2299-2301.
- H. J. Son, J.-W. Kim, Y. H. Park, and M. Chung, “Optical Design of the EBIS Charge Breeder System for RAON in Korea”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB30, pp. 265-267.
- Z. C. Chen, Y. B. Leng, Y. B. Yan, and B. P. Wang, “Correlation Analysis of Beam Diagnostic Measurements in SSRF”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR036, pp. 858-860.
- A. H. Botha et al., “A New Multidisciplinary Separated-Sector Cyclotron Facility”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1118-1121.
- J. M. Potter, “An RF Power Manifold for the Radio Frequency Quadrupole Linear Accelerator”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S3-2, pp. 138-143.
- A. Nassiri and L. R. Turner, “An Electromagnetic Micro-Undulator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P019, pp. 3491-3493.
- G. Vignola et al., “Status of SESAME”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS043, pp. 3383-3385.
- M. Kurz, P. Hulsmann, H. Klein, and A. Schempp, “Measurements on Iris-Structures with Rectangular Holes”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3023-3026.
- Y.-J. Chen and A. Paul, “Compact Proton Accelerator for Cancer Therapy”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS059, pp. 1787-1789.
- M. Kurz, H.-W. Glock, P. Huelsmann, and H. Klein, “Transversal Loss Factor of an RF-Focusing Iris Structure with Rectangular Holes”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 874-877.
- K. Seiya, S. Chaurize, C. C. Drennan, and W. Pellico, “Injection Bucket Jitter Compensation Using Phase Lock System at Fermilab Booster”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1999-2001.
- K.L.F. Bane and K. Oide, “Simulations of the Longitudinal Instability in the New SLC Damping Rings”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAC16, pp. 3105-3108.
- E. Acerbi et al., “Status of the Milan Superconducting Cyclotron Project”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2126-2129.
- W. Brefeld and P. Gurtler, “A Bypass for Synchrotron Radiation Experiments at the Storage Ring PETRA II”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2793-2796.
- P. F. Tavares, L. Lin, and G. Tosin, “The LNLS Booster Synchrotron Dipole Magnets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH017, pp. 3257-3259.
- C. S. Lee, Y. K. Kwon, E. Tojyo, M. Oyaizu, and S. C. Jeong, “Design of a Compact ECR Ion Source with Ku Band”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA6, pp. 1893-1895.
- H. S. Chang et al., “Control System Design of KIRAMS-13 Cyclotron”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP13003, pp. XX-XX.
- S.-W. Lee, C. Barbier, Y. Kang, A. Menshov, and J. Moss, “Design and fabrication of the waveguide Iris couplers for the Spallation Neutron Source drift tube linac”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL140, pp. 873-875.
- V. Gorbunov, M. Gratchev, V. Seleznev, and V. Yabzhanov, “Status Report on the Control System for the MMF Experimental Area”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1148-1149.
- D. Seal et al., “Characterisation facilities for evaluating superconducting thin films for SRF cavities”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA141, pp. 2983-2986.
- D. Angal-Kalinin and G. Singh, “Beam Transfer Line for Synchrotron Radiation Source Indus-2”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE050, pp. 638-640.
- K. R. Kim et al., “Design of Cooling System for Resonance Control of the PEFP DTL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN061, pp. 2176-2178.
- V. I. Moiseev, “Ultrasound Instrumentation for Beam Diagnostics and Accelerating Structures Control”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POW017, pp. XX-XX.
- I. Yamane, “Present status of POP experiment of lasaer stripping at BNL”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper THBY02, pp. XX-XX.
- H. O. Schoenauer, “An Alternative Scheme for Heavy Ion Driven Inertial Fusion”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP18H, pp. 2404-2406.
- J. Bigolas, M. Pachan, E. Plawski, J. Pszona, and A. Wysocka, “4 kW, 25keV Power Electron Source for Studies of Thermal Beam Effects”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2653-2655.
- D. M. Zhou, K. Ohmi, and K. Oide, “CSR Impedance for an Ultrarelativistic Beam moving in a Curved Trajectory”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC108, pp. 2268-2270.
Back to search