Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. A. Alesini et al., “The SPARX Project : R&D Activity towards X-rays FEL Sources”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS11, pp. XX-XX.
[n] M. W. McGee et al., “Transport of LCLS-II 1.3 GHz Cryomodule to SLAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2268-2270. doi:10.18429/JACoW-IPAC2016-WEPMR006
[n] W. Ingalls et al., “Status of the H- Injector Development Program at LANSCE”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA17, pp. 1923-1925.
[n] G. Jug, M. Cargnelutti, and K. B. Scheidt, “Development of Compact Electronics Dedicated to Beam Position Monitors in Injectors and Boosters”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC18, pp. 713-715.
[n] J. Tang et al., “Extraction System Design for the CSNS/RCS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS116, pp. 1777-1779.
[n] Y. M. Pischalnikov et al., “A Technique for Monitoring Fast Tuner Piezoactuator Preload Forces for Superconducting RF Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN108, pp. 2289-2291.
[n] P. Dhakal et al., “Status of SNS Proton Power Upgrade SRF Cavities Production Qualification”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 265. doi:10.18429/JACoW-SRF2021-MOPCAV005
[n] J. Tang et al., “Injection System Design for the CSNS/RCS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS118, pp. 1783-1785.
[n] O. Matilla et al., “Em# Platform: Towards a Hardware Interface Standardization Scheme”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 885-888. doi:10.18429/JACoW-ICALEPCS2015-WEPGF081
[n] G. Lopez, “Divergent Quench Velocity Expression and 4-cm SSC R&D Dipole Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2203-2206.
[n] K. Noda et al., “Recent Progress on HIMAC for Carbon Therapy”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH4GAI02, pp. 3137-3141.
[n] L. H. Yu, Y. Hao, Y. Hidaka, F. Plassard, and V. V. Smaluk, “Convergence Map with Action-Angle Variables Based on Square Matrix for Nonlinear Lattice Optimization”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 182-185. doi:10.18429/JACoW-IPAC2021-MOPAB041
[n] J. R. Alonso, “Review of Ion Accelerators”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 95-100.
[n] J. Musson, T. L. Allison, and C. Hewitt, “Injection of Direct-Sequence Spread Spectrum Pilot Tones into Beamline Components as a Means of Downconverter Stabilization and Real-Time Receiver Calibration”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF005, pp. 92-96.
[n] M. R. Shubaly, R. W. Hamm, and R. A. Judd, “Beam, An Improved Beam Extraction and Acceleration Modeling Code”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2655-2658.
[n] S. Banna, L. Schaechter, and R. H. Siemann, “Surface Roughness Effect on a Moving Bunch”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG036, pp. 1879-1881.
[n] R. Keller, “Innovations in Ion Sources and Injectors”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE2-2, pp. 232-236.
[n] H. Henke and J. Tueckmantel, “Comparison between Smooth and AG Focussing for the CLIC Main Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 848-851.
[n] E. G. Stern, J. F. Amundson, and A. Macridin, “Suppression of Instabilities Generated by an Anti-Damper With a Nonlinear Magnetic Element in IOTA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3134-3136. doi:10.18429/JACoW-IPAC2018-THPAF068
[n] S. Adam, “Space Charge Effects in Cyclotrons - From Simulations to Insights”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper H-03, pp. 446-449.
[n] K. Geissler, D. Lacarr?¿re, A. Rijllart, and E. Scavino, “A Device for Laser Annealing of Nb Films in Nb Coated Cu Cavities”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C23, pp. 485-489.
[n] S. S. Karkare et al., “Advances in Photocathode Technology at Cornell University”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOAB1, pp. 391-393.
[n] D. Omitto, J. H. Lee, and J. Ricks, “ALS-U accelerator motion design and realization”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3292-3294. doi:10.18429/JACoW-IPAC2024-THPG19
[n] Y. Arakida et al., “H- Painting Injection for the JHF 3-GeV Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP23C, pp. 2103-2105.
[n] R. Kazimi, F. R. Huson, and W. W. MacKay, “Test of a 473 MHz Four-Rod RFQ”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH440, pp. 698-700.
[n] G. Lopez, “One-Dimensional Time-independent Conduction States and Temperature Distribution Along a Normal Zone During a Quench”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2468-2471.
[n] A. Ijspeert, M. Begg, and T. M. Taylor, “Construction and Test of Superconducting Quadrupoles for the LEP2 Low-Beta Insertions”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2277-2280.
[n] J. Hyun et al., “Commissioning and First Results From a Channeling-Radiation Experiment at FAST”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 428-431. doi:10.18429/JACoW-NAPAC2016-TUPOA73
For LaTeX
Use Complete Form
For BibTeX
References
- D. A. Alesini et al., “The SPARX Project : R&D Activity towards X-rays FEL Sources”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS11, pp. XX-XX.
- M. W. McGee et al., “Transport of LCLS-II 1.3 GHz Cryomodule to SLAC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2268-2270.
- W. Ingalls et al., “Status of the H- Injector Development Program at LANSCE”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA17, pp. 1923-1925.
- G. Jug, M. Cargnelutti, and K. B. Scheidt, “Development of Compact Electronics Dedicated to Beam Position Monitors in Injectors and Boosters”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC18, pp. 713-715.
- J. Tang et al., “Extraction System Design for the CSNS/RCS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS116, pp. 1777-1779.
- Y. M. Pischalnikov et al., “A Technique for Monitoring Fast Tuner Piezoactuator Preload Forces for Superconducting RF Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN108, pp. 2289-2291.
- P. Dhakal et al., “Status of SNS Proton Power Upgrade SRF Cavities Production Qualification”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 265.
- J. Tang et al., “Injection System Design for the CSNS/RCS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS118, pp. 1783-1785.
- O. Matilla et al., “Em# Platform: Towards a Hardware Interface Standardization Scheme”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 885-888.
- G. Lopez, “Divergent Quench Velocity Expression and 4-cm SSC R&D Dipole Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2203-2206.
- K. Noda et al., “Recent Progress on HIMAC for Carbon Therapy”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH4GAI02, pp. 3137-3141.
- L. H. Yu, Y. Hao, Y. Hidaka, F. Plassard, and V. V. Smaluk, “Convergence Map with Action-Angle Variables Based on Square Matrix for Nonlinear Lattice Optimization”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 182-185.
- J. R. Alonso, “Review of Ion Accelerators”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 95-100.
- J. Musson, T. L. Allison, and C. Hewitt, “Injection of Direct-Sequence Spread Spectrum Pilot Tones into Beamline Components as a Means of Downconverter Stabilization and Real-Time Receiver Calibration”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF005, pp. 92-96.
- M. R. Shubaly, R. W. Hamm, and R. A. Judd, “Beam, An Improved Beam Extraction and Acceleration Modeling Code”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2655-2658.
- S. Banna, L. Schaechter, and R. H. Siemann, “Surface Roughness Effect on a Moving Bunch”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG036, pp. 1879-1881.
- R. Keller, “Innovations in Ion Sources and Injectors”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE2-2, pp. 232-236.
- H. Henke and J. Tueckmantel, “Comparison between Smooth and AG Focussing for the CLIC Main Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 848-851.
- E. G. Stern, J. F. Amundson, and A. Macridin, “Suppression of Instabilities Generated by an Anti-Damper With a Nonlinear Magnetic Element in IOTA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3134-3136.
- S. Adam, “Space Charge Effects in Cyclotrons - From Simulations to Insights”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper H-03, pp. 446-449.
- K. Geissler, D. Lacarr?¿re, A. Rijllart, and E. Scavino, “A Device for Laser Annealing of Nb Films in Nb Coated Cu Cavities”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C23, pp. 485-489.
- S. S. Karkare et al., “Advances in Photocathode Technology at Cornell University”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOAB1, pp. 391-393.
- D. Omitto, J. H. Lee, and J. Ricks, “ALS-U accelerator motion design and realization”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG19, pp. 3292-3294.
- Y. Arakida et al., “H- Painting Injection for the JHF 3-GeV Synchrotron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP23C, pp. 2103-2105.
- R. Kazimi, F. R. Huson, and W. W. MacKay, “Test of a 473 MHz Four-Rod RFQ”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH440, pp. 698-700.
- G. Lopez, “One-Dimensional Time-independent Conduction States and Temperature Distribution Along a Normal Zone During a Quench”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2468-2471.
- A. Ijspeert, M. Begg, and T. M. Taylor, “Construction and Test of Superconducting Quadrupoles for the LEP2 Low-Beta Insertions”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2277-2280.
- J. Hyun et al., “Commissioning and First Results From a Channeling-Radiation Experiment at FAST”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 428-431.
Back to search