Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. V. Zlobin et al., “Quench Performance and Field Quality of the 15 T Nb?Sn Dipole Demonstrator MDPCT1 in the First Test Run”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 282-285. doi:10.18429/JACoW-NAPAC2019-MOPLO20
[n] C. Hovater, H. Dong, J. Musson, G. Lahti, T. Plawski, and A. Hofler, “A New RF System for the CEBAF Normal Conducting Cavities”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP79, pp. 456-458.
[n] D. Mitrovich, R. Cooper, F. Felber, and P. Wilson, “High Power Integral RF Linac Cavities”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3518-3521.
[n] C. M. Celata et al., “A New Intense Neutron Tool for Radiography and Detection of Water and Ground Contaminants”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9B010, pp. 3807-3809.
[n] A. L. Hillman, S. J. Pasky, N. Sereno, R. Soliday, and J. Wang, “Injector Power Supplies Reliability Improvements at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE070, pp. 3804-3806.
[n] G. M. Gammel, A. W. Maschke, and R. M. Mobley, “Bunched Beam Neutralization”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3029-3031.
[n] G. Suberlucq, “Technological Challenges for High Brightness Photo-injectors”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUYBCH02, pp. 64-68.
[n] D. Oumbarek Espinos, M. Masuzawa, M. Tawada, and A. Zhidkov, “Plasma based optics for electron beam fast micro-bunching”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 118-121. doi:10.18429/JACoW-IPAC2025-MOPB025
[n] P. Joshi, T. Matsumoto, S. Michizono, and M. Omet, “Developments for the RF transmission system of the ITN cryomodule”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper TUP59, unpublished.
[n] M. Kuntzsch, S. J. Burger, R. Schurig, and T. Weber, “Long Term Investigation of the Degradation of Coaxial Cables”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 552-555. doi:10.18429/JACoW-IBIC2018-THOB03
[n] Z. Liang et al., “Development of the superconducting HWR cavities for NICA project”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 431-433. doi:10.18429/JACoW-LINAC2024-TUPB050
[n] I. N. Birukov et al., “Recent Studies of Linac for Production of Radioactive Beams in the INR”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPR01, pp. 1119-1121.
[n] R. Bossart et al., “Tune Measurement and Control at the CERN-SPS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1902-1905.
[n] S. Redaelli, O. Aberle, R. W. Assmann, A. M. Masi, and G. Spiezia, “Detecting Impacts of Proton Beams on the LHC Collimators with Vibration and Sound Measurements”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP006, pp. 1018-1020.
[n] C. Paul, J. Caporaso, M. Fawley, and P. Lee, “The Beamline for the Second Axis of the Dual Axis Radiographic Hydrodynamic Test Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP126, pp. 3254-3256.
[n] I. Wilson, “Alignment Studies for the CERN Linear Collider”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper WE2-01, pp. 557-561.
[n] Y. Bylinsky, V. Kukhtiev, P. Ostroumov, V. Paramonov, and R. E. Laxdal, “A Triple Gap Resonator Design for the Separated Function DTL at TRIUMF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W010, pp. 1135-1137.
[n] J. H. Kamperschroer, J. R. Nelson, D. W. O, and R. T. Shelton, “Target Diagnostic Instrument-Based Controls Framework for the National Ignition Facility (NIF)”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB10, pp. 184-186.
[n] S. Meyer and A. Chan, “A Components Database Design and Implementation for Accelerators and Detectors”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P031, pp. 2517-2519.
[n] B. Jiang, G. Kirkman, and N. Reinhardt, “A High Brightness Electron Beam Produced by a Ferroelectric Cathode”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3078-3081.
[n] S. Shen et al., “Testing of Vacuum System for APT/LEDA RFQ”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA112, pp. 1333-1335.
[n] A. Brachmann et al., “The ILC Polarized Electron Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP058, pp. 3420-3422.
[n] D. C. Nguyen et al., “Operation of the High Brightness LINAC for the Advanced Free-Electron Laser Initiative at Los Alamos”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2970-2973.
[n] R. E. Hester et al., “The Experimental Test Accelerator (ETA)”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4180-4183.
[n] A. McElderry, B. Billett, J. A. Carter, and K. J. Wakefield, “Final Design of NEG-Coated Aluminum Vacuum Chambers & Stainless Steel Keyhole Vacuum Chambers for the APS-U Storage Ring”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 480-482. doi:10.18429/JACoW-NAPAC2019-TUPLS12
[n] B. A. Ojur, D. Devereux, S. N. Twum, A. J. Venter, and S. Vrcic, “Asynchronous Execution of Tango Commands in the SKA Telescope Control System: An Alternative to the Tango Async Device”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1108-1114. doi:10.18429/JACoW-ICALEPCS2023-TH1BCO04
[n] R. E. Laxdal, P. G. Bricault, T. Ries, and D. V. Gorelov, “A Separated Function Drift-Tube Linac for the ISAC Project at TRIUMF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W036, pp. 1194-1196.
[n] R. Connolly et al., “Laser Beam-Profile Monitor Development at BNL for SNS”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO204, pp. 21-25.
[n] R. C. Gentzlinger et al., “Design and Fabrication of SCRF Cavities for the APT Continuous-Wave Proton Linac”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT025, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- A. V. Zlobin et al., “Quench Performance and Field Quality of the 15 T Nb?Sn Dipole Demonstrator MDPCT1 in the First Test Run”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 282-285.
- C. Hovater, H. Dong, J. Musson, G. Lahti, T. Plawski, and A. Hofler, “A New RF System for the CEBAF Normal Conducting Cavities”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP79, pp. 456-458.
- D. Mitrovich, R. Cooper, F. Felber, and P. Wilson, “High Power Integral RF Linac Cavities”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3518-3521.
- C. M. Celata et al., “A New Intense Neutron Tool for Radiography and Detection of Water and Ground Contaminants”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9B010, pp. 3807-3809.
- A. L. Hillman, S. J. Pasky, N. Sereno, R. Soliday, and J. Wang, “Injector Power Supplies Reliability Improvements at the Advanced Photon Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE070, pp. 3804-3806.
- G. M. Gammel, A. W. Maschke, and R. M. Mobley, “Bunched Beam Neutralization”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3029-3031.
- G. Suberlucq, “Technological Challenges for High Brightness Photo-injectors”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUYBCH02, pp. 64-68.
- D. Oumbarek Espinos, M. Masuzawa, M. Tawada, and A. Zhidkov, “Plasma based optics for electron beam fast micro-bunching”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB025, pp. 118-121.
- P. Joshi, T. Matsumoto, S. Michizono, and M. Omet, “Developments for the RF transmission system of the ITN cryomodule”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper TUP59, unpublished.
- M. Kuntzsch, S. J. Burger, R. Schurig, and T. Weber, “Long Term Investigation of the Degradation of Coaxial Cables”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 552-555.
- Z. Liang et al., “Development of the superconducting HWR cavities for NICA project”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 431-433.
- I. N. Birukov et al., “Recent Studies of Linac for Production of Radioactive Beams in the INR”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPR01, pp. 1119-1121.
- R. Bossart et al., “Tune Measurement and Control at the CERN-SPS”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1902-1905.
- S. Redaelli, O. Aberle, R. W. Assmann, A. M. Masi, and G. Spiezia, “Detecting Impacts of Proton Beams on the LHC Collimators with Vibration and Sound Measurements”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP006, pp. 1018-1020.
- C. Paul, J. Caporaso, M. Fawley, and P. Lee, “The Beamline for the Second Axis of the Dual Axis Radiographic Hydrodynamic Test Facility”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP126, pp. 3254-3256.
- I. Wilson, “Alignment Studies for the CERN Linear Collider”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper WE2-01, pp. 557-561.
- Y. Bylinsky, V. Kukhtiev, P. Ostroumov, V. Paramonov, and R. E. Laxdal, “A Triple Gap Resonator Design for the Separated Function DTL at TRIUMF”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W010, pp. 1135-1137.
- J. H. Kamperschroer, J. R. Nelson, D. W. O, and R. T. Shelton, “Target Diagnostic Instrument-Based Controls Framework for the National Ignition Facility (NIF)”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB10, pp. 184-186.
- S. Meyer and A. Chan, “A Components Database Design and Implementation for Accelerators and Detectors”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P031, pp. 2517-2519.
- B. Jiang, G. Kirkman, and N. Reinhardt, “A High Brightness Electron Beam Produced by a Ferroelectric Cathode”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3078-3081.
- S. Shen et al., “Testing of Vacuum System for APT/LEDA RFQ”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA112, pp. 1333-1335.
- A. Brachmann et al., “The ILC Polarized Electron Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP058, pp. 3420-3422.
- D. C. Nguyen et al., “Operation of the High Brightness LINAC for the Advanced Free-Electron Laser Initiative at Los Alamos”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2970-2973.
- R. E. Hester et al., “The Experimental Test Accelerator (ETA)”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4180-4183.
- A. McElderry, B. Billett, J. A. Carter, and K. J. Wakefield, “Final Design of NEG-Coated Aluminum Vacuum Chambers & Stainless Steel Keyhole Vacuum Chambers for the APS-U Storage Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 480-482.
- B. A. Ojur, D. Devereux, S. N. Twum, A. J. Venter, and S. Vrcic, “Asynchronous Execution of Tango Commands in the SKA Telescope Control System: An Alternative to the Tango Async Device”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TH1BCO04, pp. 1108-1114.
- R. E. Laxdal, P. G. Bricault, T. Ries, and D. V. Gorelov, “A Separated Function Drift-Tube Linac for the ISAC Project at TRIUMF”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W036, pp. 1194-1196.
- R. Connolly et al., “Laser Beam-Profile Monitor Development at BNL for SNS”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO204, pp. 21-25.
- R. C. Gentzlinger et al., “Design and Fabrication of SCRF Cavities for the APT Continuous-Wave Proton Linac”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT025, pp. XX-XX.
Back to search