Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Ikeda, M. Kikuchi, K. Ohmi, K. Oide, and D. Zhou, “Coherent Synchrotron Radiation Predicted at the SuperKEKB Damping Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME014, pp. 1595-1597.
[n] C. P. Welsch, “Development of Beyond State-of-the-art Diagnostic Techniques within the European Network DITANET”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper THVTS02, pp. 363-367.
[n] G. M. Kazakevich, R. P. Johnson, T. N. Khabiboulline, V. A. Lebedev, G. V. Romanov, and V. P. Yakovlev, “A Novel Technique for Pulsed Operation of Magnetrons without Modulation of Cathode Voltage”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 290-293. doi:10.18429/JACoW-NAPAC2019-MOPLO24
[n] A. V. Fedotov, “RHIC Plans Towards Higher Luminosity”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUZAKI01, pp. 709-713.
[n] K. Ozeki et al., “Cryomodule and Power Coupler for RIKEN Superconducting QWR”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 598-600. doi:10.18429/JACoW-LINAC2016-TUPLR061
[n] P. A. McIntosh, “Comparison of RF Cavity Designs for 3rd Generation Light Sources”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP017L, pp. 1955-1957.
[n] G. I. Bell, I. Ben-Zvi, D. L. Bruhwiler, A. V. Fedotov, V. Litvinenko, and A. V. Sobol, “Numerical Algorithms for Modeling Electron Cooling in the Presence of External Fields”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS017, pp. 3549-3551.
[n] I. H. Yu et al., “Digital RF Feedback Control System for 100MeV Proton Linac of PEFP”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11014, pp. XX-XX.
[n] L. von Sawilski, S. Casalbuoni, and J. K?Âtzler, “Surface Superconductivity of Niobium: Onset of Long-Range Coherence”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP12, pp. 60-62.
[n] Y. J. Yuan, J. Y. Tang, M. T. Song, J. W. Xia, and J. Y. Long, “Design of Beam Injection and Extraction for HIRFL-CSR Project”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-06, pp. XX-XX.
[n] M. E. Conde et al., “Argonne Wakefield Accelerator (AWA): A Facility for the Development of High Gradient Accelerating Structures and Wakefield Measurements”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUOCB101, pp. 1111-1113.
[n] E. Kako, T. Konomi, T. Miura, H. Sakai, and K. Umemori, “Long Term Cavity Performance in Compact-ERL Injector Cryomodule”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2145-2147. doi:10.18429/JACoW-IPAC2016-WEPMB013
[n] E. B. Forsyth and Y. Y. Lee, “Design and Status of the AGS Booster Accelerator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 867-870.
[n] Y. Yamamoto et al., “High Gradient Cavity Performance in STF-2 Cryomodule for the ILC at KEK”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2158-2160. doi:10.18429/JACoW-IPAC2016-WEPMB017
[n] P. A. McIntosh, “Practical Evaluation of a New CBI Avoidance System on the SRS”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP42C, pp. 2321-2323.
[n] M. H. Awida, P. Berrutti, T. N. Khabiboulline, A. Lunin, and V. P. Yakovlev, “RF Quality Control of SRF Cavities for LCLS-II Cryo-Modules”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1108-1110. doi:10.18429/JACoW-IPAC2017-MOPVA113
[n] I. Lamas Garcia et al., “LHC Injection Protection Devices, Thermo-mechanical Studies through the Design Phase”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3698-3701. doi:10.18429/JACoW-IPAC2016-THPMY019
[n] C. R. Wolf, M. Prechtl, and R. Rue?â, “Simulation and Detection of the Helical Ion-Paths in a Small Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 21-23. doi:10.18429/JACoW-Cyclotrons2016-MOB02
[n] C. G. R. Geddes, “Precision Plasma Based Acceleration Towards New Photon and Ion Sources, and Future Particle Colliders”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper THAHC3, unpublished.
[n] Y. W. An, H. F. Ji, and S. Wang, “Study of the Beam Injection and Extraction of the Proton Irradiation Accelerator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI030, pp. 348-350.
[n] L. Robertson, “The grid for LHC Data Analysis”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper THMPMP01, pp. 309-309.
[n] G. Fischerauer and T. Weiland, “Three Dimensional Computer Design of Multi-Cell Accelerating Cavities”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 931-934.
[n] Yu. Senichev and E. N. Shaposhnikova, “The Effect of Perturbation on the Longitudinal Motion of Particles in a Stepped Phase Velocity Linac”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 872-875.
[n] H. Ida et al., “Design of an Intense Positron Source for Linear Colliders”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-04, pp. 366-368.
[n] Y. S. Tan and R. Seviour, “Metamaterial Mediated Inverse Cherenkov Acceleration”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD043, pp. 4378-4380.
[n] A. E. Wheelhouse, C. D. Beard, P. A. McIntosh, A. J. Moss, and J. F. Orrett, “Design Progress of the RF System for EMMA at Daresbury Laboratory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP097, pp. 1063-1065.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Ikeda, M. Kikuchi, K. Ohmi, K. Oide, and D. Zhou, “Coherent Synchrotron Radiation Predicted at the SuperKEKB Damping Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME014, pp. 1595-1597.
- C. P. Welsch, “Development of Beyond State-of-the-art Diagnostic Techniques within the European Network DITANET”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper THVTS02, pp. 363-367.
- G. M. Kazakevich, R. P. Johnson, T. N. Khabiboulline, V. A. Lebedev, G. V. Romanov, and V. P. Yakovlev, “A Novel Technique for Pulsed Operation of Magnetrons without Modulation of Cathode Voltage”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 290-293.
- A. V. Fedotov, “RHIC Plans Towards Higher Luminosity”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUZAKI01, pp. 709-713.
- K. Ozeki et al., “Cryomodule and Power Coupler for RIKEN Superconducting QWR”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 598-600.
- P. A. McIntosh, “Comparison of RF Cavity Designs for 3rd Generation Light Sources”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP017L, pp. 1955-1957.
- G. I. Bell, I. Ben-Zvi, D. L. Bruhwiler, A. V. Fedotov, V. Litvinenko, and A. V. Sobol, “Numerical Algorithms for Modeling Electron Cooling in the Presence of External Fields”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS017, pp. 3549-3551.
- I. H. Yu et al., “Digital RF Feedback Control System for 100MeV Proton Linac of PEFP”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP11014, pp. XX-XX.
- L. von Sawilski, S. Casalbuoni, and J. K?Âtzler, “Surface Superconductivity of Niobium: Onset of Long-Range Coherence”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP12, pp. 60-62.
- Y. J. Yuan, J. Y. Tang, M. T. Song, J. W. Xia, and J. Y. Long, “Design of Beam Injection and Extraction for HIRFL-CSR Project”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P4-06, pp. XX-XX.
- M. E. Conde et al., “Argonne Wakefield Accelerator (AWA): A Facility for the Development of High Gradient Accelerating Structures and Wakefield Measurements”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUOCB101, pp. 1111-1113.
- E. Kako, T. Konomi, T. Miura, H. Sakai, and K. Umemori, “Long Term Cavity Performance in Compact-ERL Injector Cryomodule”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2145-2147.
- E. B. Forsyth and Y. Y. Lee, “Design and Status of the AGS Booster Accelerator”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 867-870.
- Y. Yamamoto et al., “High Gradient Cavity Performance in STF-2 Cryomodule for the ILC at KEK”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2158-2160.
- P. A. McIntosh, “Practical Evaluation of a New CBI Avoidance System on the SRS”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP42C, pp. 2321-2323.
- M. H. Awida, P. Berrutti, T. N. Khabiboulline, A. Lunin, and V. P. Yakovlev, “RF Quality Control of SRF Cavities for LCLS-II Cryo-Modules”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1108-1110.
- I. Lamas Garcia et al., “LHC Injection Protection Devices, Thermo-mechanical Studies through the Design Phase”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3698-3701.
- C. R. Wolf, M. Prechtl, and R. Rue?â, “Simulation and Detection of the Helical Ion-Paths in a Small Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 21-23.
- C. G. R. Geddes, “Precision Plasma Based Acceleration Towards New Photon and Ion Sources, and Future Particle Colliders”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper THAHC3, unpublished.
- Y. W. An, H. F. Ji, and S. Wang, “Study of the Beam Injection and Extraction of the Proton Irradiation Accelerator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI030, pp. 348-350.
- L. Robertson, “The grid for LHC Data Analysis”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper THMPMP01, pp. 309-309.
- G. Fischerauer and T. Weiland, “Three Dimensional Computer Design of Multi-Cell Accelerating Cavities”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 931-934.
- Yu. Senichev and E. N. Shaposhnikova, “The Effect of Perturbation on the Longitudinal Motion of Particles in a Stepped Phase Velocity Linac”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 872-875.
- H. Ida et al., “Design of an Intense Positron Source for Linear Colliders”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-04, pp. 366-368.
- Y. S. Tan and R. Seviour, “Metamaterial Mediated Inverse Cherenkov Acceleration”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD043, pp. 4378-4380.
- A. E. Wheelhouse, C. D. Beard, P. A. McIntosh, A. J. Moss, and J. F. Orrett, “Design Progress of the RF System for EMMA at Daresbury Laboratory”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP097, pp. 1063-1065.
Back to search