Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Bambade and R. Erickson, “Beam-Beam Deflections as an Interaction Point Diagnostic for the SLC”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-16, pp. 475-477.
[n] C. J. Liaw, Y. Y. Lee, J. Alessi, and J. Tuozzolo, “Calculation of the Maximum Temperature on the Carbon Stripping Foil of the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP143, pp. 3300-3302.
[n] F. Schlander et al., “The Superconducting Accelerator for the ESS Project”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 24-28. doi:10.18429/JACoW-SRF2017-MOYA01
[n] E. Klein, O. Napoly, and J. M. Rifflet, “Final Focus System with Superconducting Magnets in the Interaction Region of the TESLA Linear Collider”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-11, pp. 68-70.
[n] P. Ninin et al., “Refurbishing of the CERN PS Complex Personnel Protection System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC059, pp. 234-237.
[n] P. Bauer et al., “Advances in the Understanding and Operations of Superconducting Colliders”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPA001, pp. 54-58.
[n] J. Galambos et al., “XAL - The SNS Application Programming Infrastructure”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT168, pp. 2855-2857.
[n] B. M. Dunham et al., “ERL2011 Summaries of Working Group 1”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper WG1000, pp. 10-29.
[n] Y. Shoji, A. Ando, S. Hashimoto, N. Kumagai, H. Ohkuma, and M. Oishi, “Improvement of Beam Lifetime at the NewSUBARU Storage Ring”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14008, pp. XX-XX.
[n] Y.-H. Kim, Y.-S. Cho, H.-J. Kwon, and M.-Y. Park, “Fabrication and Test of the Drift Tubes for PEFP 20 MeV DTL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT017, pp. 1552-1554.
[n] A. Novokhatski and M. Zobov, “Longitudinal Beam Stability in the Super B-Factory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP085, pp. 4737-4739.
[n] P. A. Seidl et al., “The High Current Transport Experiment for Heavy Ion Inertial Fusion”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC001, pp. 536-540.
[n] R. Macek, G. Mackenzie, W. Rawnsley, R. E. Shafer, and G. Swain, “Beam Position Monitor Upgrade for the Los Alamos Proton Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1562-1565.
[n] K. I. Blomqvist, P. Elleaume, C. Limborg, Y. Nosochkov, J. Safranek, and A. Terebilo, “Nonlinear Dynamics in SPEAR Wigglers”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUODF103, pp. 295-297.
[n] J. D. Jarvis et al., “Fabrication of Self-Aligned-Gate Diamond Field-Emitter-Array Triodes for Free-Electron Lasers”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC60, pp. 376-378.
[n] R. Flora et al., “MECAR (Main Ring Excitation Controller and Regulator): A Real Time Learning Regulator For The Fermilab Main Ring Or The Main Injector Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAE07, pp. 2172-2174.
[n] P. Young, “Progress Update on the Development of the 3He Linac for PET Isotope Production”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP26, pp. 113-115.
[n] Z. Wu, R. J. England, R. J. Noble, E. A. Peralta, K. Soong, and M. Qi, “Silica Rod Array for Laser Driven Particle Acceleration”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC33, pp. 141-143.
[n] E. Allaria et al., “Studies for Polarization Control at LCLS”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPB08, pp. 31-34.
[n] R. H. A. Farias et al., “Commissioning of the LNLS 2 T Hybrid Wiggler”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE007, pp. 1072-1074.
[n] W. Venturini Delsolaro et al., “HIE Isolde Cavity Production & Cryomodule Commissioning, Lessons Learned”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 338-344. doi:10.18429/JACoW-SRF2017-TUXAA02
[n] C. S. Chen et al., “New Power Supply Control Interface and Energy Ramping in SRRC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P016, pp. 3488-3490.
[n] N. Valverde Alonso et al., “Electron Beam Welding and Vacuum Brazing Characterization for SRF Cavities”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP039, pp. 932-934.
[n] F. Belloni, D. Doria, A. Lorusso, V. Nassisi, and L. Torrisi, “Development of an Ion Source via Laser Ablation Plasma”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH139, pp. 3119-3121.
[n] A. Denisov, A. Feschenko, and A. Aleksandrov, “PECULIARITIES OF BUNCH SHAPE MEASUREMENTS OF H-MINUS BEAMS IN LINEAR ACCELERATORS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEEAU02, pp. XX-XX.
[n] N. R. Lobanov, D. C. Weisser, and E. Zaplatin, “Multi-Stub Superconducting RF Resonators for the ANU Heavy Ion Accelerator”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP21, pp. 334-338.
[n] A. D. Wu et al., “Experiment of Plasma Discharge on HWR Cavity for In-Situ Surface Cleaning Study”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 133-135. doi:10.18429/JACoW-LINAC2016-MOPRC029
[n] S. Lidia, F. Sannibale, J. Staples, S. Virostek, and R. Wells, “Development of a High-Brightness VHF Electron Source at LBNL”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 22, pp. 37-40.
[n] M. Pereira, M. Lamont, G. J. M??ller, D. D. Teixeira, T. E. Lahey, and E. S. M. McCrory, “LHC Supertable”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN002, pp. 86-89.
[n] S. Marks et al., “The Advanced Light Source Elliptically Polarizing Undulator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4C011, pp. 3221-3223.
[n] J. Guo et al., “Investigation of 26MHz RFQ Accelerators”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D048, pp. 196-198.
[n] D. Kang, D. C. Baars, T. R. Bieler, C. Compton, A. Mapar, and F. Pourboghrat, “Study of Slip and Deformation in High Purity Single Crystal Nb for Accelerator Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB045, pp. 191-195.
[n] A. Mereghetti et al., “SixTrack for Cleaning Studies: 2017 Updates”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3811-3814. doi:10.18429/JACoW-IPAC2017-THPAB046
[n] T.-S. Ueng, Y. F. Chiu, C. K. Kuan, K. C. Kuo, and Y.-C. Lin, “Arc-Flash Hazard and Protection for Electric Switchboard at NSRRC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3571-3573. doi:10.18429/JACoW-IPAC2017-WEPVA129
[n] M.-E. Angoletta, “Digital Low Level RF”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEXPA03, pp. 1847-1851.
[n] Y. Hong, J. Wu, B. Yang, and G. Zhou, “Analytical Thermal Analysis of Thin Diamond in High-Intensity High-Repetition-Rate Application”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 587-590. doi:10.18429/JACoW-NAPAC2019-TUPLE13
[n] F. C. Pilat et al., “Operations and Performance of RHIC as a Cu-Cu Collider”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT093, pp. 4281-4283.
[n] A. Lechner et al., “Beam Loss Measurements for Recurring Fast Loss Events During 2017 LHC Operation Possibly Caused by Macroparticles”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 780-783. doi:10.18429/JACoW-IPAC2018-TUPAF040
[n] E. M?®tral, D. Amorim, S. A. Antipov, N. Biancacci, X. Buffat, and K. S. B. Li, “Destabilising Effect of the LHC Transverse Damper”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3076-3079. doi:10.18429/JACoW-IPAC2018-THPAF048
[n] S. Blanchard et al., “Vacuum Pumping Group Controls Based on PLC”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO030, pp. 105-107.
[n] W. Lou and G. H. Hoffstaetter, “Beam Breakup Studies for the 4-Pass Cornell-Brookhaven Energy Recovery Linac Test Accelertor”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2996-2999. doi:10.18429/JACoW-IPAC2018-THPAF022
[n] L. Liu, J. Qiu, J. Tang, and T. Wei, “Simulations of Longitudinal Phase Space Painting for the CSNS RCS Injection”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP054, pp. 1403-1405.
[n] T. Zwart et al., “The MIT Bates X-Ray Laser Project”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB076, pp. 980-982.
[n] P. Martel et al., “Manufacturing and Test Folder: MTF”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO026, pp. 2688-2690.
[n] Q. G. Zhou and M. Zhang, “An APPLE-II Type Helical Undulator for SSRF”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA062, pp. 714-716.
[n] P. Baxevanis, Z. Huang, and G. Stupakov, “Angular Trajectory Kicks in a High-Gain Free-Electron Laser”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2830-2832. doi:10.18429/JACoW-IPAC2017-WEPAB108
[n] T. Ebeling et al., “Processing of TTF Cavities at DESY”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP07, pp. 293-296.
[n] H. Guler et al., “RF Conditioning of the XFEL Power Couplers at the Industrial Scale”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB102, pp. 1387-1389.
[n] K. L. Jensen, D. W. Feldman, E. J. Montgomery, P. G. O, and J. J. Petillo, “Corrections to Quantum Efficiency Predictions for Low Work Function Electron Sources”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP204, pp. 2504-2506.
[n] C. E. Chen et al., “Progress of RFQ for Ion Implantation at Peking University”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7B11, pp. 2594-2596.
[n] L. Grech, D. Alves, S. Jackson, J. Wenninger, and G. Valentino, “Feasibility of Hardware Acceleration in the LHC Orbit Feedback Controller”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 585. doi:10.18429/JACoW-ICALEPCS2019-MOPHA151
[n] B. Autin et al., “The CERN Antiproton Collector Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 308-311.
[n] M. Komiyama, M. Fujimaki, N. Fukunishi, K. Kumagai, and A. Uchiyama, “Recent Development of the RIKEN RI Beam Factory Control System”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 66-68. doi:10.18429/JACoW-PCaPAC2018-WEP15
[n] H. C. H??ther, J. Fitzek, R. Mueller, and A. Schaller, “Realization of a Concept for Scheduling Parallel Beams in the Settings Management System for FAIR”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 434-436. doi:10.18429/JACoW-ICALEPCS2015-MOPGF147
[n] D. N?Âlle, “FEL Operation at the European XFEL Facility”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 766-771. doi:10.18429/JACoW-FEL2019-FRA01
[n] P. Kuske, R. G?Ârgen, J. Kuszynski, and P. O. Schmid, “Improvements of the Set-up and Procedures for Beam Energy Measurements at BESSY II”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD083, pp. 891-893.
[n] D. M. Gassner et al., “RHIC Stochastic Cooling Motion Control”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP197, pp. 462-464.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Bambade and R. Erickson, “Beam-Beam Deflections as an Interaction Point Diagnostic for the SLC”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-16, pp. 475-477.
- C. J. Liaw, Y. Y. Lee, J. Alessi, and J. Tuozzolo, “Calculation of the Maximum Temperature on the Carbon Stripping Foil of the Spallation Neutron Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP143, pp. 3300-3302.
- F. Schlander et al., “The Superconducting Accelerator for the ESS Project”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 24-28.
- E. Klein, O. Napoly, and J. M. Rifflet, “Final Focus System with Superconducting Magnets in the Interaction Region of the TESLA Linear Collider”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-11, pp. 68-70.
- P. Ninin et al., “Refurbishing of the CERN PS Complex Personnel Protection System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC059, pp. 234-237.
- P. Bauer et al., “Advances in the Understanding and Operations of Superconducting Colliders”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPA001, pp. 54-58.
- J. Galambos et al., “XAL - The SNS Application Programming Infrastructure”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT168, pp. 2855-2857.
- B. M. Dunham et al., “ERL2011 Summaries of Working Group 1”, in Proc. 50th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'11), Tsukuba, Japan, Oct. 2011, paper WG1000, pp. 10-29.
- Y. Shoji, A. Ando, S. Hashimoto, N. Kumagai, H. Ohkuma, and M. Oishi, “Improvement of Beam Lifetime at the NewSUBARU Storage Ring”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14008, pp. XX-XX.
- Y.-H. Kim, Y.-S. Cho, H.-J. Kwon, and M.-Y. Park, “Fabrication and Test of the Drift Tubes for PEFP 20 MeV DTL”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT017, pp. 1552-1554.
- A. Novokhatski and M. Zobov, “Longitudinal Beam Stability in the Super B-Factory”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP085, pp. 4737-4739.
- P. A. Seidl et al., “The High Current Transport Experiment for Heavy Ion Inertial Fusion”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC001, pp. 536-540.
- R. Macek, G. Mackenzie, W. Rawnsley, R. E. Shafer, and G. Swain, “Beam Position Monitor Upgrade for the Los Alamos Proton Storage Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1562-1565.
- K. I. Blomqvist, P. Elleaume, C. Limborg, Y. Nosochkov, J. Safranek, and A. Terebilo, “Nonlinear Dynamics in SPEAR Wigglers”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUODF103, pp. 295-297.
- J. D. Jarvis et al., “Fabrication of Self-Aligned-Gate Diamond Field-Emitter-Array Triodes for Free-Electron Lasers”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC60, pp. 376-378.
- R. Flora et al., “MECAR (Main Ring Excitation Controller and Regulator): A Real Time Learning Regulator For The Fermilab Main Ring Or The Main Injector Synchrotron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAE07, pp. 2172-2174.
- P. Young, “Progress Update on the Development of the 3He Linac for PET Isotope Production”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP26, pp. 113-115.
- Z. Wu, R. J. England, R. J. Noble, E. A. Peralta, K. Soong, and M. Qi, “Silica Rod Array for Laser Driven Particle Acceleration”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC33, pp. 141-143.
- E. Allaria et al., “Studies for Polarization Control at LCLS”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOPB08, pp. 31-34.
- R. H. A. Farias et al., “Commissioning of the LNLS 2 T Hybrid Wiggler”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE007, pp. 1072-1074.
- W. Venturini Delsolaro et al., “HIE Isolde Cavity Production & Cryomodule Commissioning, Lessons Learned”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 338-344.
- C. S. Chen et al., “New Power Supply Control Interface and Energy Ramping in SRRC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P016, pp. 3488-3490.
- N. Valverde Alonso et al., “Electron Beam Welding and Vacuum Brazing Characterization for SRF Cavities”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP039, pp. 932-934.
- F. Belloni, D. Doria, A. Lorusso, V. Nassisi, and L. Torrisi, “Development of an Ion Source via Laser Ablation Plasma”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH139, pp. 3119-3121.
- A. Denisov, A. Feschenko, and A. Aleksandrov, “PECULIARITIES OF BUNCH SHAPE MEASUREMENTS OF H-MINUS BEAMS IN LINEAR ACCELERATORS”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEEAU02, pp. XX-XX.
- N. R. Lobanov, D. C. Weisser, and E. Zaplatin, “Multi-Stub Superconducting RF Resonators for the ANU Heavy Ion Accelerator”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP21, pp. 334-338.
- A. D. Wu et al., “Experiment of Plasma Discharge on HWR Cavity for In-Situ Surface Cleaning Study”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 133-135.
- S. Lidia, F. Sannibale, J. Staples, S. Virostek, and R. Wells, “Development of a High-Brightness VHF Electron Source at LBNL”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 22, pp. 37-40.
- M. Pereira, M. Lamont, G. J. M??ller, D. D. Teixeira, T. E. Lahey, and E. S. M. McCrory, “LHC Supertable”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN002, pp. 86-89.
- S. Marks et al., “The Advanced Light Source Elliptically Polarizing Undulator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4C011, pp. 3221-3223.
- J. Guo et al., “Investigation of 26MHz RFQ Accelerators”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D048, pp. 196-198.
- D. Kang, D. C. Baars, T. R. Bieler, C. Compton, A. Mapar, and F. Pourboghrat, “Study of Slip and Deformation in High Purity Single Crystal Nb for Accelerator Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB045, pp. 191-195.
- A. Mereghetti et al., “SixTrack for Cleaning Studies: 2017 Updates”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3811-3814.
- T.-S. Ueng, Y. F. Chiu, C. K. Kuan, K. C. Kuo, and Y.-C. Lin, “Arc-Flash Hazard and Protection for Electric Switchboard at NSRRC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3571-3573.
- M.-E. Angoletta, “Digital Low Level RF”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEXPA03, pp. 1847-1851.
- Y. Hong, J. Wu, B. Yang, and G. Zhou, “Analytical Thermal Analysis of Thin Diamond in High-Intensity High-Repetition-Rate Application”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 587-590.
- F. C. Pilat et al., “Operations and Performance of RHIC as a Cu-Cu Collider”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAT093, pp. 4281-4283.
- A. Lechner et al., “Beam Loss Measurements for Recurring Fast Loss Events During 2017 LHC Operation Possibly Caused by Macroparticles”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 780-783.
- E. M?®tral, D. Amorim, S. A. Antipov, N. Biancacci, X. Buffat, and K. S. B. Li, “Destabilising Effect of the LHC Transverse Damper”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3076-3079.
- S. Blanchard et al., “Vacuum Pumping Group Controls Based on PLC”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO030, pp. 105-107.
- W. Lou and G. H. Hoffstaetter, “Beam Breakup Studies for the 4-Pass Cornell-Brookhaven Energy Recovery Linac Test Accelertor”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2996-2999.
- L. Liu, J. Qiu, J. Tang, and T. Wei, “Simulations of Longitudinal Phase Space Painting for the CSNS RCS Injection”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP054, pp. 1403-1405.
- T. Zwart et al., “The MIT Bates X-Ray Laser Project”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB076, pp. 980-982.
- P. Martel et al., “Manufacturing and Test Folder: MTF”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO026, pp. 2688-2690.
- Q. G. Zhou and M. Zhang, “An APPLE-II Type Helical Undulator for SSRF”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA062, pp. 714-716.
- P. Baxevanis, Z. Huang, and G. Stupakov, “Angular Trajectory Kicks in a High-Gain Free-Electron Laser”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2830-2832.
- T. Ebeling et al., “Processing of TTF Cavities at DESY”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP07, pp. 293-296.
- H. Guler et al., “RF Conditioning of the XFEL Power Couplers at the Industrial Scale”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB102, pp. 1387-1389.
- K. L. Jensen, D. W. Feldman, E. J. Montgomery, P. G. O, and J. J. Petillo, “Corrections to Quantum Efficiency Predictions for Low Work Function Electron Sources”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP204, pp. 2504-2506.
- C. E. Chen et al., “Progress of RFQ for Ion Implantation at Peking University”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7B11, pp. 2594-2596.
- L. Grech, D. Alves, S. Jackson, J. Wenninger, and G. Valentino, “Feasibility of Hardware Acceleration in the LHC Orbit Feedback Controller”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 585.
- B. Autin et al., “The CERN Antiproton Collector Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 308-311.
- M. Komiyama, M. Fujimaki, N. Fukunishi, K. Kumagai, and A. Uchiyama, “Recent Development of the RIKEN RI Beam Factory Control System”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 66-68.
- H. C. H??ther, J. Fitzek, R. Mueller, and A. Schaller, “Realization of a Concept for Scheduling Parallel Beams in the Settings Management System for FAIR”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 434-436.
- D. N?Âlle, “FEL Operation at the European XFEL Facility”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 766-771.
- P. Kuske, R. G?Ârgen, J. Kuszynski, and P. O. Schmid, “Improvements of the Set-up and Procedures for Beam Energy Measurements at BESSY II”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD083, pp. 891-893.
- D. M. Gassner et al., “RHIC Stochastic Cooling Motion Control”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP197, pp. 462-464.
Back to search