Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Krafczyk, H. Edwards, Q. Kerns, M. May, E. Tilles, and F. Turkot, “A 3 KG Kicker Magnet System for the Tevatron Beam Abort System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2769-2771.
[n] T. H. Johnson et al., “The University of Maryland Isochronous Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 438-442.
[n] J. Staples, J. Edighoffer, and K.-J. Kim, “Electron Beam Transport for the LBL IR-FEL”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-47, pp. 444-446.
[n] J.-C. Denard et al., “Beam Diagnostics of the ELETTRA Injector”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1091-1094.
[n] H. Stechemesser et al., “Design and Technical Features of the Vacuum System at COSY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1410-1413.
[n] J. Sheehan and H. Langenbach, “Power Supply Regulation by Microprocesser”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2876-2879.
[n] J. Hyun et al., “Importance of quadrupole magnet fringing fields in low energy beam transport: example in the LIPAc 5 MeV D+ beamline”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3512-3515. doi:10.18429/JACoW-IPAC2024-THPR14
[n] S. L. Shope, D. E. Hasti, G. W. Kamin, J. W. Poukey, W. W. Rienstra, and W. K. Tucker, “Acceleration and Bending of a Relativistic Electron Beam on the Sandia Recirculating Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 917-920.
[n] G. von Holtey, W. Niessen, and P. Roudeau, “Synchrotron Radiation Masks for LEP2”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 454-457.
[n] M. Reiser, P. Delphin, F. Dupont, and T. Zinneman, “Center-Region Design and Initial Orbits in the Maryland University Isochronous Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 449-454.
[n] K. Potter and S. Turner, “High Precision Scrapers for ISR Luminosity Measurements”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1589-1593.
[n] D. Spence and C. L. Fink, “Production of High Proton Fractions from ECR Sources by Plasma Modification”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-15, pp. 396-397.
[n] M. Mizumoto et al., “A Proton Accelerator for Neutron Science Project at JAERI”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5A001, pp. 309-313.
[n] H. G. Blosser, “Magnet Design for the MSU 50 MeV Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63F05, pp. XX-XX.
[n] R. Fabris and G. Pangon, “The Injection and Extraction Kicker Magnets of the Elettra Booster”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC074, pp. 2166-2168.
[n] M. Kenda, A. Bardorfer, T. Beltram, and H. Kocevar, “Programming Interfaces for Reconfigurable Instruments”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL032, pp. 91-93.
[n] H. G. Blosser, M. Reiser, and M. M. Gordon, “Central - Region Studies for the MSU Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63E04, pp. XX-XX.
[n] C. S. Park, J. F. Amundson, J. A. Johnstone, V. P. Nagaslaev, and S. J. Werkema, “Space Charge Effect of the High Intensity Proton Beam during the Resonance Extraction for the MU2E Experiment at Fermilab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP092, pp. 1645-1647.
[n] A. Feschenko, V. Gaidash, and S. A. Gavrilov, “Development and Implementation of Bunch Shape Instrumentation for Ion Linacs”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 1-6. doi:10.18429/JACoW-RuPAC2021-MOX02
[n] K.-J. Kim et al., “Requirements and Design of a Highly Stable Infrared Free Electron Laser at LBL”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 559-562.
[n] P. Tenenbaum, R. Brinkmann, and V. Tsakanov, “Beam-based Alignment of the TESLA Main Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI054, pp. 515-517.
[n] P. Wang et al., “A Comparitive Study of High Power, Multistage, X-Band TWT Amplifiers”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA88, pp. 3600-3602.
[n] S. Schaffner et al., “Device Control at CEBAF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR13, pp. 2265-2267.
[n] I. L. Rakhno, N. V. Mokhov, and K. K. Gudima, “Modeling Proton- and Light Ion-Induced Reactions at Low Energies in the MARS15 Code”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4003-4006. doi:10.18429/JACoW-IPAC2015-THPF123
[n] J. Perry and E. Woodworth, “The CEBAF Fast Shutdown System”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU463, pp. 484-486.
[n] M. Fabretto, A. Rindi, and G. Tromba, “Health Physics Approach to Synchrotron Radiation”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1386-1389.
[n] V. P. Nagaslaev, V. A. Lebedev, and S. J. Werkema, “Lattice Optimization for the Stochastic Cooling in the Accumulator Ring at Fermilab”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper TUA2C09, pp. 110-112.
[n] C. Fischer et al., “Operation of the CERN-ISR for High Luminosity”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1515-1518.
[n] K. Halbach, “Magnet Innovations for Linacs”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH2-1, pp. 407-410.
[n] O. A. Anderson and L. L. LoDestro, “Exact Analytic Solution of the Envelope Equations for a Matched Quadrupole-Focused Beam in the Low Space Charge Limit”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS003, pp. 3513-3515.
[n] R. Assmann et al., “Stability Considerations for Final Focus Systems of Future Linear Colliders”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B01, pp. 447-449.
[n] H. Lim, D. H. Jeong, M. W. Lee, M. J. Lee, S. W. Shin, and J. Yi, “Design of a Radiotherapy Machine using the 6 MeV C-Band Standing-Wave Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1921-1923. doi:10.18429/JACoW-IPAC2016-TUPOY008
[n] P. Chu et al., “XAL-Based Applications and Online Model for LCLS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP022, pp. 4811-4813.
[n] J. M. Schippers et al., “A Novel Design of a Cyclotron Based Accelerator System for Multi-Ion Therapy”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper TU-11, pp. 74-78.
[n] G. Chiozzi, A. Longinotti, P. Santin, and R. Cirami, “Study of Portability of VLT Instrumentation Software to ACS”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA10, pp. 337-339.
[n] E. Bouquerel, E. Baussan, M. Dracos, and N. Vassilopoulos, “Energy Deposition and Activation Studies of the ESSnuSB Horn Station”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 561-563. doi:10.18429/JACoW-IPAC2017-MOPIK029
[n] O. P. Lebedev, N. A. Ignashin, S. V. Ivanov, and S. E. Sytov, “Transverse Feedbacks in the U70 Proton Synchrotron of IHEP”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB032, pp. 239-241.
[n] S. M. Alzubaidi, O. Meusel, U. Ratzinger, and C. Wagner, “Control System for FRANZ Facility”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 830-832. doi:10.18429/JACoW-IPAC2015-MOPHA025
[n] J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ22, pp. 2506-2508.
[n] S. Marcowitz, G. A. Concaildi, and R. George, “Beam Matching, Steering, and Design Using a CDC-924, an Oscilloscope, and Programs Developed at Argonne National Laboratory”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 848-852.
[n] S. Posen et al., “A Booster Replacement Linac for the Future of High Energy Physics at Fermilab”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL116, unpublished.
[n] P. G. O, T. A. Butler, M. T. Lynch, K. F. McKenna, M. B. Pongratz, and T. J. Zaugg, “A Linear Accelerator in Space - the Beam Experiment Aboard Rocket”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH454, pp. 739-742.
[n] K. Egawa and T. M. Taylor, “Conceptual Design of a 5 T/mm Quadrupole for Linear Collider Final Focus”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 360-363.
[n] P. F. Rohwer and S. Schneider, “Beam Injection and Extraction for the Separated-Sector Cyclotron of the National Accelerator Centre”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-28, pp. 481-483.
[n] G. Burt et al., “ERL Related HOM Measurements at ELBE”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 31, pp. 129-132.
[n] H. Nishimura, C. Timossi, and M. Valdez, “Accelerator Operation Management Using Objects”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR03, pp. 2244-2246.
[n] L. R. Shen and D. K. Liu, “The SSRF Control System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB009, pp. 2704-2706.
[n] F. Turkot, “Attainment of 500-GeV Beam in the Fermilab Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1512-1515.
[n] I. V. Pogorelov, J. Qiang, R. D. Ryne, M. Venturini, R. L. Warnock, and A. Zholents, “Recent Developments in IMPACT and Application to Future Light Sources”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEPPP01, pp. 182-184.
[n] W. H. Tan, P. Piot, and A. Zholents, “Longitudinal-Phase-Space Manipulation for Efficient Beam-Driven Structure Wakefield Acceleration”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2296-2299. doi:10.18429/JACoW-IPAC2019-WEZZPLS3
[n] K. N. Leung, “Invited Paper: High-Intensity Sources for Light Ions”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper G-02, pp. 372-376.
[n] R. Hettel et al., “SPEAR 3 Upgrade Project: The Final Year”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPA005, pp. 235-237.
[n] S. E. Sytov, N. A. Ignashin, and V. I. Serebryakov, “Constant Magnetic Field Measuring System in the U-70 Synchrotron”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 323-324. doi:10.18429/JACoW-RUPAC2018-WEPSB18
[n] M. Jensen et al., “Testing of the ESS MB-IOT Prototypes”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1759-1764. doi:10.18429/JACoW-IPAC2018-WEXGBF1
[n] Y. C. Nie, M. Huening, C. Liebig, and M. Schmitz, “RF Tuning of a S-band Hybrid Buncher for Injector Upgrade of LINAC II at DESY”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP022, pp. 478-480.
[n] B. Almeida et al., “RF Superconductivity at CEBAF”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91A02, pp. XX-XX.
[n] J. E. Dusatko, J. Browne, A. S. Fisher, K. D. Kotturi, S. R. Norum, and J. J. Olsen, “The LCLS Undulator Beam Loss Monitor Readout System”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM084, pp. 384-388.
[n] T.-C. Fan, C.-H. Chang, C.-S. Fann, C.-S. Hwang, and F.-Y. Lin, “Magnetic Field Measurement and Fine-tuning of Kickers”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH186, pp. 3236-3238.
[n] O. V. Singh and R. J. Nawrocky, “Upgrade of Beam Steering System Components and Controls for the NSLS Storage Rings”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1902-1905.
[n] N. Barov, J. S. Kim, and D. J. Newsham, “Resonant-Cavity Diagnostics for an Emittance Exchange Experiment”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP040, pp. 3537-3539.
[n] S. J. Lee, J. H. Han, and D. E. Kim, “Elliptically Polarizing Undulator Design for PAL-XFEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4362-4365. doi:10.18429/JACoW-IPAC2018-THPMK031
[n] C. Bianchini, J. Browne, K. H. Kim, P. Krejcik, M. Weaver, and S. Zelazny, “LCLS-II Timing Pattern Generator Configuration GUIs”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 307-310. doi:10.18429/JACoW-ICALEPCS2017-TUMPL04
[n] P. Stabile et al., “RF Gun Water Temperature Control System at ASTA”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM13, pp. 661-663.
[n] J. Kwan, F. M. Bieniosek, I. Haber, E. Halaxa, J.-L. Vay, and G. Westenskow, “Beam Optics of a 10-cm Diameter High Current Heavy Ion Diode”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB006, pp. 3297-3299.
[n] J. Maddocks and A. Yuecel, “The Heat Load of an 80 K Liner for the SSC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3879-3882.
[n] D. E. Anderson, “Developments in Solid-State Modulator Technology Towards High Availability”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO4GRI02, pp. 117-121.
[n] H. V. Smith Jr, G. O. Bolme, J. D. Sherman, R. R. Stevens Jr, L. M. Young, and T. J. Zaugg, “Comparison of Beam Simulations with Measurements for a 1.25-MeV, CW RFQ”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4055, pp. 174-176.
[n] K. Okamura, T. Iwashita, K. Takayama, M. Wake, K. Takaki, and M. Toshiya, “A Compact Switching Power Supply utilizing SiC-JFET for the Digital Accelerator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD071, pp. 3677-3679.
[n] M. Wendt et al., “High Resolution BPMs with Integrated Gain Correction System”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD19, pp. 89-91.
[n] G. P. Ferri, M. Glaser, F. Lemeilleur, and G. von Holtey, “Commissioning and Operating Experience with the Interaction Rate and Background Monitors of the LEP ee- Collider”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 797-800.
[n] T. Mastorides, J. D. Fox, C. H. Rivetta, and D. Van Winkle, “Measurements and Analysis of Longitudinal HOM Driven Coupled Bunch Modes in PEP-II Rings”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF014, pp. 115-119.
[n] F. Pollastrone, M. Riva, and G. C. Cardarilli, “Real-Time Liquid Scintillator Calibration Based on Intensity Modulated LED”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 575-579. doi:10.18429/JACoW-ICALEPCS2017-TUPHA072
[n] A. Lueangaramwong et al., “Experimental Investigation of Field-Emission From Silicon Nano-Cone Cathodes”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 548-550. doi:10.18429/JACoW-IPAC2017-MOPIK022
[n] J. D. Fuerst et al., “Status of the ATLAS Upgrade Cryomodule”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP38, pp. 548-550.
[n] C. R. Prior et al., “ISIS Megawatt Upgrade Plans”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG043, pp. 1527-1529.
[n] P. Celliers et al., “Proposed New Facilities for Proton Therapy at iThemba LABS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI085, pp. 560-562.
[n] P. Letellier, B. Gremont, R. Johnsen, G. Meyrand, D. Tronc, and D. Wang, “Commissioning of the CAMD Louisiana State Univ. 200 MeV Electron Linac Injector”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 575-578.
[n] D. Baros, J. D. Sedillo, and H. A. Watkins, “Bridging the Gap; Updating LANSCE Digitizers”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 822-824. doi:10.18429/JACoW-IBIC2016-WEPG74
[n] D. Zhang et al., “Segmented Terahertz Driven Device for Electron Acceleration”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1642-1644. doi:10.18429/JACoW-IPAC2018-TUPML045
[n] D. K. Olsen et al., “The ORNL Radioactive Ion Beam Project with the ORIC Accelerator”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XIII-07, pp. 741-744.
[n] D. Engwall et al., “A High-DC-Voltage GaAs Photoemission Gun: Transverse Emittance and Momentum Spread Measurements”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2C012, pp. 2693-2695.
[n] H. Kapitza, P. G?Âttlicher, N. Heidbrook, and H. Schlarb, “FEL Disturbance by Ambient Magnetic Field Changes”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH012, pp. 74-76.
[n] M. H. Nasr, M. Breidenbach, E. A. Nanni, and S. G. Tantawi, “Cryogenic-Copper Accelerating Structures: New Frontier for Beam Brightness, Efficiency and Cost-Capability”, in Proc. IPAC'20, Caen, France, May 2020, paper THVIR10, pp. XX-XX.
[n] O. Bruening and F. Willeke, “Diffusion-like Processes in Proton Storage Rings due to the Combined Effect of Non-Linear Fields and Modulational Effects with more than one Frequency”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 991-994.
[n] T. Tajima et al., “LANSCE Vacuum System Refurbishment Plan and Vacuum Alert System Improvements for Predictive Maintenance”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP150, pp. 3717-3719.
[n] R. L. Geng et al., “RD on the Niobium-Copper Superconducting Cavity at Peking University”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOP013, pp. 70-73.
[n] Q. Zhao, V. A. Andreev, J. Brandon, G. Machicoane, and F. Marti, “Experimental Studies of the ReA3 Triple-Harmonic Buncher”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP059, pp. 1686-1686.
[n] M. Z. Zhang et al., “SAPT- A Synchrotron Based Proton Therapy”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper THBO02, pp. 278-281. doi:10.18429/JACoW-CYCLOTRONS2022-THBO02
[n] K. Suda, E. Ikezawa, O. Kamigaito, N. Sakamoto, K. Yamada, and Y. Touchi, “Construction of the New Amplifiers for the RIKEN-LINAC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP122, pp. 339-341.
[n] J. N. Weaver and H. A. Hogg, “Improving the Phase Stability of the SLAC rf Driveline Network for SLC Operation”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2234-2237.
[n] C. D. Moore et al., “Single Bunch Intensity Monitoring System Using an Improved Wall Current Monitor”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1513-1516.
[n] J. W. Kwan, D. Baca, F. M. Bieniosek, and E. Chacon-Golcher, “Development of High Current Surface Ionization Sources for Heavy Ion Fusion”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH012, pp. 2102-2104.
[n] O. Meusel, H. Klein, J. Pozimski, A. Lakatos, and A. Jakob, “Influence of space charge fluctuations on low energy beam transport of high current ion beams.”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THB05, pp. 800-802.
[n] J.-M. Filhol et al., “Operation Status and Performances Upgrade on SOLEIL Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC016, pp. 2022-2024.
[n] H. Eickhoff, Th. Haberer, and R. Steiner, “Accelerator Control for the GSI Cancer Therapy Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP06C, pp. 2348-2350.
[n] K. J. O and J. R. Freeman, “Stochastic Electron Beams in the Ion-Focused Regime”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU433, pp. 393-395.
[n] A. Y. Zelinsky, I. V. Drebot, Yu. N. Grigor, R. Tatchyn, and O. D. Zvonarjova, “Radiation of Electron in the Field of Plane Light Wave”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT077, pp. 3997-3999.
[n] K. Iwamoto, Y. Ikeda, T. Kitamura, and T. Matsuoka, “Design of Cold BPM Feedthrough”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC041, pp. 1146-1148.
[n] M. Liepe, S. Belomestnykh, J. Dobbins, R. Kaplan, C. Strohman, and B. Stuhl, “Experience with the New Digital RF Control System at the CESR Storage Ring”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP67, pp. 625-625.
[n] H. Matsumoto, M. Akemoto, H. Hayano, T. Naito, and S. Takeda, “High-Gradient S-Band Test Linac for Japan Linear Collider”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-02, pp. 296-298.
[n] J. Pasternak and L. J. Jenner, “Design of a Rapid Cycling Synchrotron for the Final Stage of Acceleration in a Common Proton Driver for a Neutrino Factory and a Spallation Neutron Source Based on Megawatt Upgrades to ISIS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS103, pp. 2751-2753.
[n] R. L. Madrak et al., “Progress on the Design of a Perpendicularly Biased 2nd Harmonic Cavity for the Fermilab Booster”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 130-133. doi:10.18429/JACoW-NAPAC2016-MOPOB28
[n] S. Kazakov et al., “Main Couplers for Project X”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC050, pp. 2324-2326.
[n] I. J. Kim, S. M. Choi, M. G. Hur, S. W. Kim, J. H. Park, and S. D. Yang, “The Solid Target Control System for the RFT-30 30 MeV Cyclotron in KAERI”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA071, pp. 241-243.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Krafczyk, H. Edwards, Q. Kerns, M. May, E. Tilles, and F. Turkot, “A 3 KG Kicker Magnet System for the Tevatron Beam Abort System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2769-2771.
- T. H. Johnson et al., “The University of Maryland Isochronous Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 438-442.
- J. Staples, J. Edighoffer, and K.-J. Kim, “Electron Beam Transport for the LBL IR-FEL”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-47, pp. 444-446.
- J.-C. Denard et al., “Beam Diagnostics of the ELETTRA Injector”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1091-1094.
- H. Stechemesser et al., “Design and Technical Features of the Vacuum System at COSY”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1410-1413.
- J. Sheehan and H. Langenbach, “Power Supply Regulation by Microprocesser”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2876-2879.
- J. Hyun et al., “Importance of quadrupole magnet fringing fields in low energy beam transport: example in the LIPAc 5 MeV D+ beamline”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR14, pp. 3512-3515.
- S. L. Shope, D. E. Hasti, G. W. Kamin, J. W. Poukey, W. W. Rienstra, and W. K. Tucker, “Acceleration and Bending of a Relativistic Electron Beam on the Sandia Recirculating Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 917-920.
- G. von Holtey, W. Niessen, and P. Roudeau, “Synchrotron Radiation Masks for LEP2”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 454-457.
- M. Reiser, P. Delphin, F. Dupont, and T. Zinneman, “Center-Region Design and Initial Orbits in the Maryland University Isochronous Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 449-454.
- K. Potter and S. Turner, “High Precision Scrapers for ISR Luminosity Measurements”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1589-1593.
- D. Spence and C. L. Fink, “Production of High Proton Fractions from ECR Sources by Plasma Modification”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-15, pp. 396-397.
- M. Mizumoto et al., “A Proton Accelerator for Neutron Science Project at JAERI”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5A001, pp. 309-313.
- H. G. Blosser, “Magnet Design for the MSU 50 MeV Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63F05, pp. XX-XX.
- R. Fabris and G. Pangon, “The Injection and Extraction Kicker Magnets of the Elettra Booster”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC074, pp. 2166-2168.
- M. Kenda, A. Bardorfer, T. Beltram, and H. Kocevar, “Programming Interfaces for Reconfigurable Instruments”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL032, pp. 91-93.
- H. G. Blosser, M. Reiser, and M. M. Gordon, “Central - Region Studies for the MSU Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63E04, pp. XX-XX.
- C. S. Park, J. F. Amundson, J. A. Johnstone, V. P. Nagaslaev, and S. J. Werkema, “Space Charge Effect of the High Intensity Proton Beam during the Resonance Extraction for the MU2E Experiment at Fermilab”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP092, pp. 1645-1647.
- A. Feschenko, V. Gaidash, and S. A. Gavrilov, “Development and Implementation of Bunch Shape Instrumentation for Ion Linacs”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 1-6.
- K.-J. Kim et al., “Requirements and Design of a Highly Stable Infrared Free Electron Laser at LBL”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 559-562.
- P. Tenenbaum, R. Brinkmann, and V. Tsakanov, “Beam-based Alignment of the TESLA Main Linac”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI054, pp. 515-517.
- P. Wang et al., “A Comparitive Study of High Power, Multistage, X-Band TWT Amplifiers”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA88, pp. 3600-3602.
- S. Schaffner et al., “Device Control at CEBAF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR13, pp. 2265-2267.
- I. L. Rakhno, N. V. Mokhov, and K. K. Gudima, “Modeling Proton- and Light Ion-Induced Reactions at Low Energies in the MARS15 Code”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4003-4006.
- J. Perry and E. Woodworth, “The CEBAF Fast Shutdown System”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU463, pp. 484-486.
- M. Fabretto, A. Rindi, and G. Tromba, “Health Physics Approach to Synchrotron Radiation”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1386-1389.
- V. P. Nagaslaev, V. A. Lebedev, and S. J. Werkema, “Lattice Optimization for the Stochastic Cooling in the Accumulator Ring at Fermilab”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper TUA2C09, pp. 110-112.
- C. Fischer et al., “Operation of the CERN-ISR for High Luminosity”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1515-1518.
- K. Halbach, “Magnet Innovations for Linacs”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH2-1, pp. 407-410.
- O. A. Anderson and L. L. LoDestro, “Exact Analytic Solution of the Envelope Equations for a Matched Quadrupole-Focused Beam in the Low Space Charge Limit”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS003, pp. 3513-3515.
- R. Assmann et al., “Stability Considerations for Final Focus Systems of Future Linear Colliders”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B01, pp. 447-449.
- H. Lim, D. H. Jeong, M. W. Lee, M. J. Lee, S. W. Shin, and J. Yi, “Design of a Radiotherapy Machine using the 6 MeV C-Band Standing-Wave Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1921-1923.
- P. Chu et al., “XAL-Based Applications and Online Model for LCLS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP022, pp. 4811-4813.
- J. M. Schippers et al., “A Novel Design of a Cyclotron Based Accelerator System for Multi-Ion Therapy”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper TU-11, pp. 74-78.
- G. Chiozzi, A. Longinotti, P. Santin, and R. Cirami, “Study of Portability of VLT Instrumentation Software to ACS”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA10, pp. 337-339.
- E. Bouquerel, E. Baussan, M. Dracos, and N. Vassilopoulos, “Energy Deposition and Activation Studies of the ESSnuSB Horn Station”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 561-563.
- O. P. Lebedev, N. A. Ignashin, S. V. Ivanov, and S. E. Sytov, “Transverse Feedbacks in the U70 Proton Synchrotron of IHEP”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB032, pp. 239-241.
- S. M. Alzubaidi, O. Meusel, U. Ratzinger, and C. Wagner, “Control System for FRANZ Facility”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 830-832.
- J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ22, pp. 2506-2508.
- S. Marcowitz, G. A. Concaildi, and R. George, “Beam Matching, Steering, and Design Using a CDC-924, an Oscilloscope, and Programs Developed at Argonne National Laboratory”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 848-852.
- S. Posen et al., “A Booster Replacement Linac for the Future of High Energy Physics at Fermilab”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL116, unpublished.
- P. G. O, T. A. Butler, M. T. Lynch, K. F. McKenna, M. B. Pongratz, and T. J. Zaugg, “A Linear Accelerator in Space - the Beam Experiment Aboard Rocket”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH454, pp. 739-742.
- K. Egawa and T. M. Taylor, “Conceptual Design of a 5 T/mm Quadrupole for Linear Collider Final Focus”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 360-363.
- P. F. Rohwer and S. Schneider, “Beam Injection and Extraction for the Separated-Sector Cyclotron of the National Accelerator Centre”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-28, pp. 481-483.
- G. Burt et al., “ERL Related HOM Measurements at ELBE”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 31, pp. 129-132.
- H. Nishimura, C. Timossi, and M. Valdez, “Accelerator Operation Management Using Objects”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR03, pp. 2244-2246.
- L. R. Shen and D. K. Liu, “The SSRF Control System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB009, pp. 2704-2706.
- F. Turkot, “Attainment of 500-GeV Beam in the Fermilab Synchrotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1512-1515.
- I. V. Pogorelov, J. Qiang, R. D. Ryne, M. Venturini, R. L. Warnock, and A. Zholents, “Recent Developments in IMPACT and Application to Future Light Sources”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEPPP01, pp. 182-184.
- W. H. Tan, P. Piot, and A. Zholents, “Longitudinal-Phase-Space Manipulation for Efficient Beam-Driven Structure Wakefield Acceleration”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2296-2299.
- K. N. Leung, “Invited Paper: High-Intensity Sources for Light Ions”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper G-02, pp. 372-376.
- R. Hettel et al., “SPEAR 3 Upgrade Project: The Final Year”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPA005, pp. 235-237.
- S. E. Sytov, N. A. Ignashin, and V. I. Serebryakov, “Constant Magnetic Field Measuring System in the U-70 Synchrotron”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 323-324.
- M. Jensen et al., “Testing of the ESS MB-IOT Prototypes”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1759-1764.
- Y. C. Nie, M. Huening, C. Liebig, and M. Schmitz, “RF Tuning of a S-band Hybrid Buncher for Injector Upgrade of LINAC II at DESY”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP022, pp. 478-480.
- B. Almeida et al., “RF Superconductivity at CEBAF”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91A02, pp. XX-XX.
- J. E. Dusatko, J. Browne, A. S. Fisher, K. D. Kotturi, S. R. Norum, and J. J. Olsen, “The LCLS Undulator Beam Loss Monitor Readout System”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM084, pp. 384-388.
- T.-C. Fan, C.-H. Chang, C.-S. Fann, C.-S. Hwang, and F.-Y. Lin, “Magnetic Field Measurement and Fine-tuning of Kickers”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH186, pp. 3236-3238.
- O. V. Singh and R. J. Nawrocky, “Upgrade of Beam Steering System Components and Controls for the NSLS Storage Rings”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1902-1905.
- N. Barov, J. S. Kim, and D. J. Newsham, “Resonant-Cavity Diagnostics for an Emittance Exchange Experiment”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP040, pp. 3537-3539.
- S. J. Lee, J. H. Han, and D. E. Kim, “Elliptically Polarizing Undulator Design for PAL-XFEL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4362-4365.
- C. Bianchini, J. Browne, K. H. Kim, P. Krejcik, M. Weaver, and S. Zelazny, “LCLS-II Timing Pattern Generator Configuration GUIs”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 307-310.
- P. Stabile et al., “RF Gun Water Temperature Control System at ASTA”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM13, pp. 661-663.
- J. Kwan, F. M. Bieniosek, I. Haber, E. Halaxa, J.-L. Vay, and G. Westenskow, “Beam Optics of a 10-cm Diameter High Current Heavy Ion Diode”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB006, pp. 3297-3299.
- J. Maddocks and A. Yuecel, “The Heat Load of an 80 K Liner for the SSC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3879-3882.
- D. E. Anderson, “Developments in Solid-State Modulator Technology Towards High Availability”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO4GRI02, pp. 117-121.
- H. V. Smith Jr, G. O. Bolme, J. D. Sherman, R. R. Stevens Jr, L. M. Young, and T. J. Zaugg, “Comparison of Beam Simulations with Measurements for a 1.25-MeV, CW RFQ”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4055, pp. 174-176.
- K. Okamura, T. Iwashita, K. Takayama, M. Wake, K. Takaki, and M. Toshiya, “A Compact Switching Power Supply utilizing SiC-JFET for the Digital Accelerator”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD071, pp. 3677-3679.
- M. Wendt et al., “High Resolution BPMs with Integrated Gain Correction System”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD19, pp. 89-91.
- G. P. Ferri, M. Glaser, F. Lemeilleur, and G. von Holtey, “Commissioning and Operating Experience with the Interaction Rate and Background Monitors of the LEP ee- Collider”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 797-800.
- T. Mastorides, J. D. Fox, C. H. Rivetta, and D. Van Winkle, “Measurements and Analysis of Longitudinal HOM Driven Coupled Bunch Modes in PEP-II Rings”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF014, pp. 115-119.
- F. Pollastrone, M. Riva, and G. C. Cardarilli, “Real-Time Liquid Scintillator Calibration Based on Intensity Modulated LED”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 575-579.
- A. Lueangaramwong et al., “Experimental Investigation of Field-Emission From Silicon Nano-Cone Cathodes”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 548-550.
- J. D. Fuerst et al., “Status of the ATLAS Upgrade Cryomodule”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP38, pp. 548-550.
- C. R. Prior et al., “ISIS Megawatt Upgrade Plans”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG043, pp. 1527-1529.
- P. Celliers et al., “Proposed New Facilities for Proton Therapy at iThemba LABS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI085, pp. 560-562.
- P. Letellier, B. Gremont, R. Johnsen, G. Meyrand, D. Tronc, and D. Wang, “Commissioning of the CAMD Louisiana State Univ. 200 MeV Electron Linac Injector”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 575-578.
- D. Baros, J. D. Sedillo, and H. A. Watkins, “Bridging the Gap; Updating LANSCE Digitizers”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 822-824.
- D. Zhang et al., “Segmented Terahertz Driven Device for Electron Acceleration”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1642-1644.
- D. K. Olsen et al., “The ORNL Radioactive Ion Beam Project with the ORIC Accelerator”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XIII-07, pp. 741-744.
- D. Engwall et al., “A High-DC-Voltage GaAs Photoemission Gun: Transverse Emittance and Momentum Spread Measurements”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2C012, pp. 2693-2695.
- H. Kapitza, P. G?Âttlicher, N. Heidbrook, and H. Schlarb, “FEL Disturbance by Ambient Magnetic Field Changes”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH012, pp. 74-76.
- M. H. Nasr, M. Breidenbach, E. A. Nanni, and S. G. Tantawi, “Cryogenic-Copper Accelerating Structures: New Frontier for Beam Brightness, Efficiency and Cost-Capability”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper THVIR10, pp. XX-XX.
- O. Bruening and F. Willeke, “Diffusion-like Processes in Proton Storage Rings due to the Combined Effect of Non-Linear Fields and Modulational Effects with more than one Frequency”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 991-994.
- T. Tajima et al., “LANSCE Vacuum System Refurbishment Plan and Vacuum Alert System Improvements for Predictive Maintenance”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP150, pp. 3717-3719.
- R. L. Geng et al., “RD on the Niobium-Copper Superconducting Cavity at Peking University”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper MOP013, pp. 70-73.
- Q. Zhao, V. A. Andreev, J. Brandon, G. Machicoane, and F. Marti, “Experimental Studies of the ReA3 Triple-Harmonic Buncher”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP059, pp. 1686-1686.
- M. Z. Zhang et al., “SAPT- A Synchrotron Based Proton Therapy”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper THBO02, pp. 278-281.
- K. Suda, E. Ikezawa, O. Kamigaito, N. Sakamoto, K. Yamada, and Y. Touchi, “Construction of the New Amplifiers for the RIKEN-LINAC”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP122, pp. 339-341.
- J. N. Weaver and H. A. Hogg, “Improving the Phase Stability of the SLAC rf Driveline Network for SLC Operation”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2234-2237.
- C. D. Moore et al., “Single Bunch Intensity Monitoring System Using an Improved Wall Current Monitor”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1513-1516.
- J. W. Kwan, D. Baca, F. M. Bieniosek, and E. Chacon-Golcher, “Development of High Current Surface Ionization Sources for Heavy Ion Fusion”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH012, pp. 2102-2104.
- O. Meusel, H. Klein, J. Pozimski, A. Lakatos, and A. Jakob, “Influence of space charge fluctuations on low energy beam transport of high current ion beams.”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THB05, pp. 800-802.
- J.-M. Filhol et al., “Operation Status and Performances Upgrade on SOLEIL Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC016, pp. 2022-2024.
- H. Eickhoff, Th. Haberer, and R. Steiner, “Accelerator Control for the GSI Cancer Therapy Project”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP06C, pp. 2348-2350.
- K. J. O and J. R. Freeman, “Stochastic Electron Beams in the Ion-Focused Regime”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU433, pp. 393-395.
- A. Y. Zelinsky, I. V. Drebot, Yu. N. Grigor, R. Tatchyn, and O. D. Zvonarjova, “Radiation of Electron in the Field of Plane Light Wave”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT077, pp. 3997-3999.
- K. Iwamoto, Y. Ikeda, T. Kitamura, and T. Matsuoka, “Design of Cold BPM Feedthrough”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC041, pp. 1146-1148.
- M. Liepe, S. Belomestnykh, J. Dobbins, R. Kaplan, C. Strohman, and B. Stuhl, “Experience with the New Digital RF Control System at the CESR Storage Ring”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP67, pp. 625-625.
- H. Matsumoto, M. Akemoto, H. Hayano, T. Naito, and S. Takeda, “High-Gradient S-Band Test Linac for Japan Linear Collider”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-02, pp. 296-298.
- J. Pasternak and L. J. Jenner, “Design of a Rapid Cycling Synchrotron for the Final Stage of Acceleration in a Common Proton Driver for a Neutrino Factory and a Spallation Neutron Source Based on Megawatt Upgrades to ISIS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS103, pp. 2751-2753.
- R. L. Madrak et al., “Progress on the Design of a Perpendicularly Biased 2nd Harmonic Cavity for the Fermilab Booster”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 130-133.
- S. Kazakov et al., “Main Couplers for Project X”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC050, pp. 2324-2326.
- I. J. Kim, S. M. Choi, M. G. Hur, S. W. Kim, J. H. Park, and S. D. Yang, “The Solid Target Control System for the RFT-30 30 MeV Cyclotron in KAERI”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA071, pp. 241-243.
Back to search