Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. P. Lee, “The Beam Envelope Equation - Systematic Solution for a FODO Lattice with Space Charge”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAC01, pp. 2835-2837.
[n] A. Bosotti et al., “Mechanical Vibration Measurements on TTF Cryomodules”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FOAA005, pp. 434-436.
[n] X. H. Yang et al., “Collimated Electron and Proton Beam from Ultra-intense Laser Interaction with a Rear Hole Target”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD040, pp. 4369-4371.
[n] A. Coly, T. Lamy, T. Thuillier, G. Gaubert, and A. C. C. Villari, “High Current Production with 2.45 GHz ECR Ion Source”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOPOT005, pp. 50-50.
[n] B. D. Muratori, J. K. Jones, K. A. Dewhurst, and H. L. Owen, “High Acceptance Beamline for the Capture of a Laser Wakefield Accelerated Beam”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3456-3459. doi:10.18429/JACoW-IPAC2018-THPAK094
[n] A. Bungau, C. Bungau, R. Cywinski, P. J. C. King, and J. S. Lord, “Impact of the Energy of the Proton Driver on Muon Production”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA079, pp. 259-261.
[n] D. Wisnivesky, A. C. Lira, and J. A. Pomilio, “Bending Magnet Power Supply with Switching Series Regulator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1217-1220.
[n] E. Nicoletti et al., “Design overview of the medium energy beam transport line for the ANTHEM project”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB099, unpublished.
[n] D. Li and K. Imasaki, “Proposal of Laser-Driven Acceleration with Bessel Beam”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS13, pp. XX-XX.
[n] J. R. Delayen, C. S. Hopper, and R. G. Olave, “Design of Low-frequency Superconducting Spoke Cavities for High-velocity Applications”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC121, pp. 364-366.
[n] A. Pisent et al., “Design optimization for the construction of a linear accelerator driven BNCT facility”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL132, unpublished.
[n] J. M. Byrd et al., “First Observations of a ``Fast Beam-Ion Instability'' at the ALS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3B011, pp. 1563-1565.
[n] Y. Y. Ma et al., “Improvement in Proton Beam Properties during Laser Acceleration and Propagation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD055, pp. 4407-4409.
For LaTeX
Use Complete Form
For BibTeX
References
- E. P. Lee, “The Beam Envelope Equation - Systematic Solution for a FODO Lattice with Space Charge”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAC01, pp. 2835-2837.
- A. Bosotti et al., “Mechanical Vibration Measurements on TTF Cryomodules”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FOAA005, pp. 434-436.
- X. H. Yang et al., “Collimated Electron and Proton Beam from Ultra-intense Laser Interaction with a Rear Hole Target”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD040, pp. 4369-4371.
- A. Coly, T. Lamy, T. Thuillier, G. Gaubert, and A. C. C. Villari, “High Current Production with 2.45 GHz ECR Ion Source”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOPOT005, pp. 50-50.
- B. D. Muratori, J. K. Jones, K. A. Dewhurst, and H. L. Owen, “High Acceptance Beamline for the Capture of a Laser Wakefield Accelerated Beam”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3456-3459.
- A. Bungau, C. Bungau, R. Cywinski, P. J. C. King, and J. S. Lord, “Impact of the Energy of the Proton Driver on Muon Production”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA079, pp. 259-261.
- D. Wisnivesky, A. C. Lira, and J. A. Pomilio, “Bending Magnet Power Supply with Switching Series Regulator”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1217-1220.
- E. Nicoletti et al., “Design overview of the medium energy beam transport line for the ANTHEM project”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB099, this conference.
- D. Li and K. Imasaki, “Proposal of Laser-Driven Acceleration with Bessel Beam”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS13, pp. XX-XX.
- J. R. Delayen, C. S. Hopper, and R. G. Olave, “Design of Low-frequency Superconducting Spoke Cavities for High-velocity Applications”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC121, pp. 364-366.
- A. Pisent et al., “Design optimization for the construction of a linear accelerator driven BNCT facility”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL132, unpublished.
- J. M. Byrd et al., “First Observations of a ``Fast Beam-Ion Instability'' at the ALS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3B011, pp. 1563-1565.
- Y. Y. Ma et al., “Improvement in Proton Beam Properties during Laser Acceleration and Propagation”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD055, pp. 4407-4409.
Back to search