Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Fuhe Huang, Yaolin Sun, Xiaoping Wang, Dunan Zhang, Bingsong Huang, Lan Dong, “The Fabrication of Quadrupole Magnets for PEP-II LER”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P021, pp. 3300-3302.
[n] E.N.Dementyev, N.G.Gavrilov, A.S.Medvedko, A.D.Oreshkov, S.S.Serednyakov, E.N.Shubin, N.A.Vinokurov, “FREE ELECTRON LASER FOR THE SIBERIAN CENTRE FOR PHOTOCHEMICAL RESEACH: SOFTWARE AND CAPABILITIES OF BEAM POSITION MEASUREMENT SYSTEM”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP19, pp. XX-XX.
[n] M. Bocciai, A. Fabris, D. Lachi, C. Pasotti, M. Rinaldi, and M. Svandrlik, “Operational Experience with the ELETTRA RF System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP12C, pp. 1758-1760.
[n] Y. W. Kang and D. Horan, “Reconfigurable High-Power RF System in the APS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P026, pp. 2935-2937.
[n] A. Maalberg et al., “First high-power RF tests of cavities for BESSY II with a new mTCA-based LLRF system”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM014, unpublished.
[n] S. R. Lawrie, A. P. Letchford, J. K. Pozimski, and P. Savage, “Combined Electromagnetic-Thermal-Structural Simulation of the Four-metre Radio Frequency Quadrupole to be Installed on the Front End Test Stand”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD058, pp. 816-818.
[n] R. Kuenzi and M. Emmenegger, “Bipolar 10A and 50A Magnet Power Supplies for SwissFEL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA040, pp. 756-758.
[n] C. K. W. Nam, P. Aitken, and B. W. J. McNeil, “Unaveraged Three-Dimesional Modelling of the FEL”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH025, pp. 47-50.
[n] J. C. Post and J. A. M. Peperkamp, “MEA Computer Controlled Personal Access System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3080-3082.
[n] B. Fowler, “Experience with the Procurement of Ferrite and Temperature Compensator for Permanent Magnets for Accelerators”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P011, pp. 3254-3256.
[n] I. L. Sheynman, A. Altmark, S. Baturin, and A. Kanareykin, “The Analysis of Tunable Dielectric Loaded Wakefield Accelerating Structure of Rectangular Geometry”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD057, pp. 4413-4415.
For LaTeX
Use Complete Form
For BibTeX
References
- Fuhe Huang, Yaolin Sun, Xiaoping Wang, Dunan Zhang, Bingsong Huang, Lan Dong, “The Fabrication of Quadrupole Magnets for PEP-II LER”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P021, pp. 3300-3302.
- E.N.Dementyev, N.G.Gavrilov, A.S.Medvedko, A.D.Oreshkov, S.S.Serednyakov, E.N.Shubin, N.A.Vinokurov, “FREE ELECTRON LASER FOR THE SIBERIAN CENTRE FOR PHOTOCHEMICAL RESEACH: SOFTWARE AND CAPABILITIES OF BEAM POSITION MEASUREMENT SYSTEM”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP19, pp. XX-XX.
- M. Bocciai, A. Fabris, D. Lachi, C. Pasotti, M. Rinaldi, and M. Svandrlik, “Operational Experience with the ELETTRA RF System”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP12C, pp. 1758-1760.
- Y. W. Kang and D. Horan, “Reconfigurable High-Power RF System in the APS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P026, pp. 2935-2937.
- A. Maalberg et al., “First high-power RF tests of cavities for BESSY II with a new mTCA-based LLRF system”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM014, this conference.
- S. R. Lawrie, A. P. Letchford, J. K. Pozimski, and P. Savage, “Combined Electromagnetic-Thermal-Structural Simulation of the Four-metre Radio Frequency Quadrupole to be Installed on the Front End Test Stand”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD058, pp. 816-818.
- R. Kuenzi and M. Emmenegger, “Bipolar 10A and 50A Magnet Power Supplies for SwissFEL”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA040, pp. 756-758.
- C. K. W. Nam, P. Aitken, and B. W. J. McNeil, “Unaveraged Three-Dimesional Modelling of the FEL”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH025, pp. 47-50.
- J. C. Post and J. A. M. Peperkamp, “MEA Computer Controlled Personal Access System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3080-3082.
- B. Fowler, “Experience with the Procurement of Ferrite and Temperature Compensator for Permanent Magnets for Accelerators”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P011, pp. 3254-3256.
- I. L. Sheynman, A. Altmark, S. Baturin, and A. Kanareykin, “The Analysis of Tunable Dielectric Loaded Wakefield Accelerating Structure of Rectangular Geometry”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD057, pp. 4413-4415.
Back to search