Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Golluccio et al., “Instruments and Methods for the Magnetic Measurement of the Super-FRS Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1183-1185. doi:10.18429/JACoW-IPAC2016-TUPMB037
[n] T. Fabry, M. Baudin, B. Feral, L. Vanherpe, and L. Tabourot, “Intervention Modelling at High-energy Particle Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1814-1816. doi:10.18429/JACoW-IPAC2014-TUPRI102
[n] T. Kramer, Wr. Neustadt, W. Bartmann, C. Bracco, B. Goddard, and M. Meddahi, “Performance Studies for Protection against Asynchronous Dumps in the LHC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB063, pp. 1662-1664.
[n] S. Russenschuck, G. Caiafa, L. Fiscarelli, M. Liebsch, C. Petrone, and P. Rogacki, “Challenges in Extracting Pseudo-Multipoles From Magnetic Measurements”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 87-92. doi:10.18429/JACoW-ICAP2018-SUPAG03
[n] P. J. Bryant, “Antiprotons in the ISR”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2047-2050.
[n] M. Castellano, L. Catani, A. Cianchi, M. Geitz, G. Orlandi, and V. Verzilov, “Bunch Length Measurements at TTF using Coherent Diffraction Radiation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B05, pp. 1699-1701.
[n] W. H. Backer, C. J. A. Corsten, and H. L. Hagedoorn, “Some Aspects on Linear and Non-Linear Orbit Motion in Storage Rings”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3607-3610.
[n] N. Leros and D. Schulte, “Static Beam-Based Alignment of the RF Structures in the CLIC Main Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI059, pp. 461-463.
[n] P. J. Bryant, “AUSTRON, A Central European Pulsed Spallation Neutron Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THXF204, pp. 108-112.
[n] A. Meseck, “The Impact of the Space Charge on the STARS Performance”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH056, pp. 374-377.
[n] D. A. G. Neet, “Beam Profile Monitors for Fast and Slow Extracted Proton Beams”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 914-919.
[n] S. Barabin, P. Forck, T. Giacomini, D. Liakin, A. Orlov, and V. Skachkov, “DEVELOPMENT OF A PERMANENT MAGNET RESIDUAL GAS PROFILE MONITOR WITH FAST READOUT”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP36, pp. XX-XX.
[n] T. Hakulinen et al., “Integration of CATIA/SMARTEAM into CERN's Corporate Engineering Data Management System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC130, pp. 1374-1376.
[n] P. F. Dahl, R. Christian, and G. Parzen, “Computer Calculations of the Magnetic Field of Alternating Gradient Synchrotron Magnets”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 408-412.
[n] R. T. Neuenschwander, L. Liu, S. R. Marques, A. R. D. Rodrigues, and R. M. Seraphim, “Engineering Challenges of Future Light Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1308-1313. doi:10.18429/JACoW-IPAC2015-TUXC2
[n] S. R. Conviser, “The Stanford Two-Mile Linear Accelerator Vacuum System”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 699-705.
[n] C. C. Iliescu, “Pole Face Shape Design in High-Energy Accelerators”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 387-392.
[n] J. H. Dieperink, A. Finnigan, W. Kalbreier, R. L. Keizer, M. Laffin, and V. Mertens, “Computerized Precision Control of a Synchronous High Voltage Discharge Switch for the Beam Separation System of the LEP eE - Collider”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1981-1984.
[n] J. I. M. Botman and H. L. Hagedoorn, “EUTERPE, A Ring Facility for the Eindhoven Cyclotron Laboratory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 488-491.
[n] W. A. Ortiz, R. T. Neuenschwander, and F. W. B. Talarico, “Magnetic Measurements at LNLS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 378-381.
[n] A. R. D. Rodrigues et al., “Sirius Light Source Status Report”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2886-2889. doi:10.18429/JACoW-IPAC2018-THXGBD4
[n] M. Bajko et al., “Geometric and Magnetic Axes of the LHC Dipole”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH071, pp. 3392-3394.
[n] P. Martel, Ch. Delamare, G. Godineau, and R. Nunes, “ADaMS 3: An Enhanced Access Control System for CERN”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 401-404. doi:10.18429/JACoW-ICALEPCS2015-MOPGF136
[n] K. Brand and J. P. Gourber, “A Magnetic Beam Positron Detector”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1812-1815.
[n] K. Diamantis, M. Bonora-Tam, M. Buzio, V. Di Capua, and D. Giloteaux, “Online performance monitoring and early fault detection for the B-train real-time field measurement systems at CERN”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6136, unpublished.
[n] H. H. Tsai, S.-H. Chang, W.-S. Chiou, F. Z. Hsiao, and H. C. Li, “Efficiency Analysis for the Cryogenic System at NSRRC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD044, pp. 2512-2514.
[n] H. Brochna, “Effect of Nuclear Radiation on Magent Insulation in High-Energy Accelerators”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 683-689.
[n] V. V. Parkhomchuk, A. A. Sery, and D. Shiltsev, “Compensation of Coherent Tune Shift of Betatron Oscillation in Storage Rings”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 529-532.
[n] F. Schutte, H. L. Hagedoorn, G. C. L. van Heusden, and A. J. M. van Vliet, “The Automatic Control of the Eindhoven A.V.F. Cyclotron II: Measurements”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 524-531.
[n] J.-B. Bergot et al., “A Modular Design for the 56 Variants of the Short Straight Section in the Arcs of the Large Hadron Collider LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A05, pp. 2157-2159.
[n] A. Orlov and E. V. Efremov, “Transient Effects in the Linear Accelerator for Free Electron Laser”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 781-784.
[n] J. Tinlot and D. Green, “A Storage Ring for 10 BeV Muons”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 470-476.
[n] E. L. Hoyt and E. L. Garwin, “Accelerator Vacuum Problems: In-Line Oil Trapping Between the Stanford Linear Accelerator and the Beam Switchyard”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 740-743.
[n] P. J. Bryant, “AGILE, A Tool for Interactive Lattice Design”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B03, pp. 1357-1359.
[n] M. Bajko, F. Savary, and W. Scandale, “Geometry and Alignment Requirements for the LHC Main Dipole”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A07, pp. 2160-2162.
[n] J. P. Gourber, H. G. Hereward, and S. Myers, “Overlap Knock-Out Effects in the Cern Intersecting Storage Rings (ISR)”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1405-1408.
[n] S. Keskar, H. Bartosik, and C. Carli, “A low Energy Polarizer Ring for FCC-ee”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5048, unpublished.
[n] F. S. Reinath and D. T. Scalise, “Design Concepts of Modern Accelerator Vacuum Systems - Prediction vs. Experimental Data”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 734-740.
[n] W. Shields et al., “Status update of the laser-hybrid accelerator for radiobiological applications”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1155-1158. doi:10.18429/JACoW-IPAC2025-TUPB103
[n] A. R. D. Rodrigues et al., “Sirius Status Report”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2811-2814. doi:10.18429/JACoW-IPAC2016-WEPOW001
[n] E. Sanchez-Corral Mena et al., “Data Management and Tools for the Access to the Radiological Areas at CERN”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC057, pp. 226-229.
[n] T. Pettersson et al., “LHC Access System: from Design to Operation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC129, pp. 1371-1373.
[n] X. Y. Chang et al., “Study of Secondary Emission Enhanced Photoinjector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE042, pp. 2711-2713.
[n] K. K. Gillies et al., “Trends in Software for Large Astronomy Projects”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper MOAB03, pp. 13-17.
[n] N. Leros and D. Schulte, “Feedback Response in the CLIC Main Linac to Transverse and Longitudinal Dynamic Imperfections”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI060, pp. 464-466.
[n] P. Martel, Ch. Delamare, S. Mallon Amerigo, L. Pater, S. Petit, and D. Widegren, “Maximizing the Efficiency of LHC Maintenance during Operation Times using a Mobile Tool”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB072, pp. 4035-4037.
[n] T. W. Birtwistle et al., “360 Degree Panoramic Photographs During the Long Shutdown 2 of the CERN Machines and Facilities”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3410-3412. doi:10.18429/JACoW-IPAC2021-WEPAB315
[n] C. J. A. Corsten and H. L. Hagedoorn, “Uncoupled and Coupled Orbit Motion in a Storage Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2624-2627.
[n] S. Alden et al., “Progress and Developments of Beam Delivery Simulation (BDSIM)”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5138, unpublished.
[n] D. Schulte, G. Guignard, N. Leros, and E. T. d'Amico, “Simulation Package based on PLACET”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH082, pp. 3033-3035.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Golluccio et al., “Instruments and Methods for the Magnetic Measurement of the Super-FRS Magnets”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1183-1185.
- T. Fabry, M. Baudin, B. Feral, L. Vanherpe, and L. Tabourot, “Intervention Modelling at High-energy Particle Accelerators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1814-1816.
- T. Kramer, Wr. Neustadt, W. Bartmann, C. Bracco, B. Goddard, and M. Meddahi, “Performance Studies for Protection against Asynchronous Dumps in the LHC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB063, pp. 1662-1664.
- S. Russenschuck, G. Caiafa, L. Fiscarelli, M. Liebsch, C. Petrone, and P. Rogacki, “Challenges in Extracting Pseudo-Multipoles From Magnetic Measurements”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 87-92.
- P. J. Bryant, “Antiprotons in the ISR”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2047-2050.
- M. Castellano, L. Catani, A. Cianchi, M. Geitz, G. Orlandi, and V. Verzilov, “Bunch Length Measurements at TTF using Coherent Diffraction Radiation”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B05, pp. 1699-1701.
- W. H. Backer, C. J. A. Corsten, and H. L. Hagedoorn, “Some Aspects on Linear and Non-Linear Orbit Motion in Storage Rings”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3607-3610.
- N. Leros and D. Schulte, “Static Beam-Based Alignment of the RF Structures in the CLIC Main Linac”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI059, pp. 461-463.
- P. J. Bryant, “AUSTRON, A Central European Pulsed Spallation Neutron Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THXF204, pp. 108-112.
- A. Meseck, “The Impact of the Space Charge on the STARS Performance”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH056, pp. 374-377.
- D. A. G. Neet, “Beam Profile Monitors for Fast and Slow Extracted Proton Beams”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 914-919.
- S. Barabin, P. Forck, T. Giacomini, D. Liakin, A. Orlov, and V. Skachkov, “DEVELOPMENT OF A PERMANENT MAGNET RESIDUAL GAS PROFILE MONITOR WITH FAST READOUT”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP36, pp. XX-XX.
- T. Hakulinen et al., “Integration of CATIA/SMARTEAM into CERN's Corporate Engineering Data Management System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC130, pp. 1374-1376.
- P. F. Dahl, R. Christian, and G. Parzen, “Computer Calculations of the Magnetic Field of Alternating Gradient Synchrotron Magnets”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 408-412.
- R. T. Neuenschwander, L. Liu, S. R. Marques, A. R. D. Rodrigues, and R. M. Seraphim, “Engineering Challenges of Future Light Sources”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1308-1313.
- S. R. Conviser, “The Stanford Two-Mile Linear Accelerator Vacuum System”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 699-705.
- C. C. Iliescu, “Pole Face Shape Design in High-Energy Accelerators”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 387-392.
- J. H. Dieperink, A. Finnigan, W. Kalbreier, R. L. Keizer, M. Laffin, and V. Mertens, “Computerized Precision Control of a Synchronous High Voltage Discharge Switch for the Beam Separation System of the LEP eE - Collider”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1981-1984.
- J. I. M. Botman and H. L. Hagedoorn, “EUTERPE, A Ring Facility for the Eindhoven Cyclotron Laboratory”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 488-491.
- W. A. Ortiz, R. T. Neuenschwander, and F. W. B. Talarico, “Magnetic Measurements at LNLS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 378-381.
- A. R. D. Rodrigues et al., “Sirius Light Source Status Report”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2886-2889.
- M. Bajko et al., “Geometric and Magnetic Axes of the LHC Dipole”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH071, pp. 3392-3394.
- P. Martel, Ch. Delamare, G. Godineau, and R. Nunes, “ADaMS 3: An Enhanced Access Control System for CERN”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 401-404.
- K. Brand and J. P. Gourber, “A Magnetic Beam Positron Detector”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1812-1815.
- K. Diamantis, M. Bonora-Tam, M. Buzio, V. Di Capua, and D. Giloteaux, “Online performance monitoring and early fault detection for the B-train real-time field measurement systems at CERN”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6136, this conference.
- H. H. Tsai, S.-H. Chang, W.-S. Chiou, F. Z. Hsiao, and H. C. Li, “Efficiency Analysis for the Cryogenic System at NSRRC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD044, pp. 2512-2514.
- H. Brochna, “Effect of Nuclear Radiation on Magent Insulation in High-Energy Accelerators”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 683-689.
- V. V. Parkhomchuk, A. A. Sery, and D. Shiltsev, “Compensation of Coherent Tune Shift of Betatron Oscillation in Storage Rings”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 529-532.
- F. Schutte, H. L. Hagedoorn, G. C. L. van Heusden, and A. J. M. van Vliet, “The Automatic Control of the Eindhoven A.V.F. Cyclotron II: Measurements”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 524-531.
- J.-B. Bergot et al., “A Modular Design for the 56 Variants of the Short Straight Section in the Arcs of the Large Hadron Collider LHC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A05, pp. 2157-2159.
- A. Orlov and E. V. Efremov, “Transient Effects in the Linear Accelerator for Free Electron Laser”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 781-784.
- J. Tinlot and D. Green, “A Storage Ring for 10 BeV Muons”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 470-476.
- E. L. Hoyt and E. L. Garwin, “Accelerator Vacuum Problems: In-Line Oil Trapping Between the Stanford Linear Accelerator and the Beam Switchyard”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 740-743.
- P. J. Bryant, “AGILE, A Tool for Interactive Lattice Design”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6B03, pp. 1357-1359.
- M. Bajko, F. Savary, and W. Scandale, “Geometry and Alignment Requirements for the LHC Main Dipole”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A07, pp. 2160-2162.
- J. P. Gourber, H. G. Hereward, and S. Myers, “Overlap Knock-Out Effects in the Cern Intersecting Storage Rings (ISR)”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1405-1408.
- S. Keskar, H. Bartosik, and C. Carli, “A low Energy Polarizer Ring for FCC-ee”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5048, this conference.
- F. S. Reinath and D. T. Scalise, “Design Concepts of Modern Accelerator Vacuum Systems - Prediction vs. Experimental Data”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 734-740.
- W. Shields et al., “Status update of the laser-hybrid accelerator for radiobiological applications”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB103, pp. 1155-1158.
- A. R. D. Rodrigues et al., “Sirius Status Report”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2811-2814.
- E. Sanchez-Corral Mena et al., “Data Management and Tools for the Access to the Radiological Areas at CERN”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC057, pp. 226-229.
- T. Pettersson et al., “LHC Access System: from Design to Operation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC129, pp. 1371-1373.
- X. Y. Chang et al., “Study of Secondary Emission Enhanced Photoinjector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE042, pp. 2711-2713.
- K. K. Gillies et al., “Trends in Software for Large Astronomy Projects”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper MOAB03, pp. 13-17.
- N. Leros and D. Schulte, “Feedback Response in the CLIC Main Linac to Transverse and Longitudinal Dynamic Imperfections”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI060, pp. 464-466.
- P. Martel, Ch. Delamare, S. Mallon Amerigo, L. Pater, S. Petit, and D. Widegren, “Maximizing the Efficiency of LHC Maintenance during Operation Times using a Mobile Tool”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB072, pp. 4035-4037.
- T. W. Birtwistle et al., “360 Degree Panoramic Photographs During the Long Shutdown 2 of the CERN Machines and Facilities”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3410-3412.
- C. J. A. Corsten and H. L. Hagedoorn, “Uncoupled and Coupled Orbit Motion in a Storage Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2624-2627.
- S. Alden et al., “Progress and Developments of Beam Delivery Simulation (BDSIM)”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5138, this conference.
- D. Schulte, G. Guignard, N. Leros, and E. T. d'Amico, “Simulation Package based on PLACET”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH082, pp. 3033-3035.
Back to search