JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Abliz, J. H. Grimmer, Y. Jaski, M. Ramanathan, and F. Westferro, “Clearing Magnet Design for APS-U”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1228-1230. doi:10.18429/JACoW-NAPAC2016-THPOA62
[n]	S. Heidrich and K. Aulenbacher, “5 MeV Beam Diagnostics at the Mainz Energy-Recovering Superconducting Accelerator MESA”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 479-482. doi:10.18429/JACoW-IBIC2016-TUPG57
[n]	A. Faingersh et al., “New Resonator for the Israeli FEL”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH018, pp. 349-351. 
[n]	R. C. Trendler, “Study of Pulse Stretching in High Current Power Supplies using Multipulse Techniques”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1349-1352. 
[n]	C. R. Chen et al., “The Correlation between the Beam Orbit Stability and the Utilities at SRRC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP38C, pp. 2309-2311. 
[n]	F. Palmer, “Contribution of Oxide Layers to the Residual Resistance of Niobium”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-27, pp. XX-XX. 
[n]	G. V. Dolbilov, “Two Beam Proton Accelerator for Neutron Generators and Electronuclear Industry”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAA006, pp. 651-653. 
[n]	S. M. Polozov, I. A. Ashanin, Yu. D. Kliuchevskaia, M. V. Lalayan, A. I. Pronikov, and V. I. Rashchikov, “Beam Dynamics Simulation Results in the 6 GeV Top-Up Injection Linac of the 4th Generation Light Source USSR”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 285-288. doi:10.18429/JACoW-RUPAC2018-WEPSB05
[n]	K. Nakajima et al., “Proof of Principle Experiments of Laser Wakefield Acceleration”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-42, pp. 798-800. 
[n]	A. P. Durkin and B. I. Bondarev, “RFQ Parameter Choice by Multi-Parameter Optimization”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THB11, pp. 818-820. 
[n]	K. Abrahamsson et al., “Performance of CRYRING with Improved Electron Cooling”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 380-385. 
[n]	R. Wright, D. Kerstiens, G. Vaughn, and R. E. Weiss, “EPICS Simulation Tools for Control System Development (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-61, pp. 845-847. 
[n]	V. Chouhan et al., “Symmetric Removal of Niobium Superconducting RF Cavity in Vertical Electropolishing”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB105, pp. 409-413. 
[n]	C. J. Bocchetta et al., “First Measurements of the Elettra 100 MeV Pre-Injector”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-07, pp. 311-313. 
[n]	M. S. Jaski et al., “Magnet Designs for the Multi-bend Achromat Lattice at the Advanced Photon Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3260-3263. doi:10.18429/JACoW-IPAC2015-WEPTY003
[n]	A. Farricker, P. Kramer, B. K. Popovic, E. Sunar, C. Vollinger, and M. Wendt, “Identification of Imperfections in Impedance Shields on the SPS-QF Flanges via Non-Intrusive Measurements”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3119-3122. doi:10.18429/JACoW-IPAC2018-THPAF063
[n]	G. Vignola et al., “SESAME Status”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THC3MA02, pp. 610-612. 
[n]	T. Xu et al., “Completion of FRIB Superconducting Linac and Phased Beam Commissioning”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 197. doi:10.18429/JACoW-SRF2021-MOOFAV10
[n]	C. Suzuki et al., “Reduction of the Field Emission Dark Currents from Copper Surface in a High Gradient DC Field ”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D053, pp. 211-213. 
[n]	J. P. Holzbauer et al., “Horizontal Testing of a Dressed Deflecting Mode Cavity for the APS Upgrade Short Pulse X-Ray Project”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP078, pp. 321-324. 
[n]	A. S. Smygacheva, Y. A. Fomin, and V. Korchuganov, “Coupled Bunch Instabilities in the Storage Rings”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 396-398. doi:10.18429/JACoW-RUPAC2016-WEPSB016
[n]	C. Brown and C. G. Whyte, “Emittance Exchange in MICE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3378-3381. doi:10.18429/JACoW-IPAC2019-WEPTS108
[n]	U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Studies of Electropolishing and Oxypolishing Treated Diffusion Coated Nb3Sn Surfaces”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3954-3957. doi:10.18429/JACoW-IPAC2018-THPAL131
[n]	R. Monge et al., “Integration of a Stripline Kicker Prototype for CLIC Project Into ALBA Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 230-232. doi:10.18429/JACoW-MEDSI2016-TUPE29
[n]	K. M. Wilson et al., “Mechanical Cavity Design for 100MV Upgrade Cryomodule”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB064, pp. 2866-2868. 
[n]	F. Soubelet, ?û. Apsimon, T. H. B. Persson, R. Tom?ís Garc?¡a, and C. P. Welsch, “Supervised Machine Learning for Local Coupling Sources Detection in the LHC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1842-1845. doi:10.18429/JACoW-IPAC2022-WEPOPT008
[n]	J. Y. Zhai, C.-X. Tang, and S. Zheng, “Multipactor Electron Gun with CVD Diamond Cathodes”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH174, pp. 3203-3205. 
[n]	S. P. Moeller, “ASTRID, A Storage Ring for Ions and Electrons”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 112-115. 
[n]	A. Ijspeert and J. Salminen, “Superconducting Coil Compression by Scissor Laminations”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP016G, pp. 2237-2239. 
[n]	M. Bassetti et al., “Beam Loading in DAPhiNE Cavities”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 801-804. 
[n]	M. P. Cox et al., “Vacuum System for the Diamond Light Source DDBA Upgrade”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3587-3589. doi:10.18429/JACoW-IPAC2017-WEPVA136
[n]	H. H. Tsai et al., “The Current Status of the Cryogenic System Design and Construction for TPS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA076, pp. 3846-3848. 
[n]	D. Prasuhn et al., “Status of the Cooler Synchrotron COSY-Juelich”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB069, pp. 3428-3430. 
[n]	U. Rauch, P. Forck, P. H??lsmann, P. Kowina, and P. Moritz, “Baseband Tune Measurements at GSI SIs-18 using Direct Digitized BPM Signals”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD16, pp. 324-326. 
[n]	R. C. Niemann et al., “APS Storage Ring Vacuum System Development”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 29-32. 
[n]	J. M. Bogaty, “Development of Low Level Beam Diagnostics for Polarized Proton Operation in the Zero Gradient Synchrotron (ZGS)”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1762-1765. 
[n]	J. L. Crisp et al., “Beam Position and Phase Measurements of Microampere Beams at the Michigan State University ReA3 Facility”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC20, pp. 1187-1189. 
[n]	F. Galluccio, Z. Guo, W. Scandale, F. Schmidt, and A. Verdier, “Long-term Stability Studies for the Large Hadron Collider”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1669-1672. 
[n]	L. W. Funk et al., “The 52 MHz RF System for PETRA II”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1102-1105. 
[n]	R. J. Steinhagen, A. Boccardi, E. Calvo Giraldo, M. Gasior, J. L. Gonzalez, and O. R. Jones, “On the Continuous Measurement of the LHC Beta-Function - Prototype Studies at the SPS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP037, pp. 3528-3530. 
[n]	G. A. Voss, “PETRA, An Extension of the Storage Ring Facilities at DESY”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1374-1376. 
[n]	M. Schillo, “Global Industrial Development of Accelerators for Charged Particle Therapy”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1912-1916. doi:10.18429/JACoW-IPAC2014-WEIB01
[n]	A. P. Letchford et al., “Status of the RAL Front End Test Stand”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3959-3961. doi:10.18429/JACoW-IPAC2015-THPF105
[n]	M. Repovz, A. Gyorgy, A. Kerschbaum, F. Osmic, S. M. Schwarz, and G. Burtin, “Profile Grid Monitor and First Measurement Results at the MedAustron Accelerator”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF07, pp. 822-825. 
[n]	M. C. Lin and K. L. Tsang, “On the Thermal Deformation Analyses of CVD Silicon-Carbide Mirror”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP37C, pp. 2318-2320. 
[n]	J. Q. Zhang, R. Han, and S. P. Li, “Conceptional design of CEPC Cryogenic system”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 282. doi:10.18429/JACoW-eeFACT2018-WEPAB05
[n]	A. I. Benediktovitch, “First Order Perturbation Theory Evaluation of Initial Stage of Self Amplified Crystal-Based X-Ray Emission”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 325-327. doi:10.18429/JACoW-RUPAC2016-TUPSA052
[n]	C. Schmitzer et al., “MedAustron Synchrotron RF Commissioning for Medical Proton Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 844-846. doi:10.18429/JACoW-IPAC2016-MOPOY001
[n]	A. Xiao, M. Borland, L. Emery, and Y. Wang, “Tracking Particles Through A General Magnetic Field”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP063, pp. 1591-1593. 
[n]	M. W. McGee and J. T. Volk, “Vibrational Stability of SRF Accelerator Test Facility at Fermilab”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP059, pp. 960-962. 
[n]	C. W. Owen, E. R. Gray, D. E. Johnson, G. M. Lee, S. Ohnuma, and R. A. Winje, “A 200-MHz Debuncher for the Fermilab Injector”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1904-1906. 
[n]	A. M. Baldin et al., “Acceleration and Ejection of Deuterons of the Dubna Synchrophasotron”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1024-1027. 
[n]	W. Gai et al., “Advanced Accelerator Test Facility (AATF) Upgrade Plan”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 612-615. 
[n]	A. P. Lee et al., “Operation of the NSRRC 2998 MHz Photo-cathode RF Gun”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA058, pp. 2247-2249. 
[n]	Z. G. Zong et al., “Tests on the 1.3 GHz Low Loss Single-Cell RF Superconducting Large Grain Cavities of IHEP”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP168, pp. 943-945. 
[n]	R. W. R?Âth et al., “Anomalous Loss Mechanisms in High Purity Nb Cavities”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F01, pp. XX-XX. 
[n]	E. W. Nissen and B. Erdelyi, “Modeling Single Particle Dynamics in Low Energy and Small Radius Accelerators”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC036, pp. 330-332. 
[n]	X. R. Resende, A. H. C. Mukai, I. Stevani, and L. N. P. Vilela, “Development of a Virtual Accelerator for Sirius”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 45-46. doi:10.18429/JACoW-PCAPAC2016-WEPOPRPO21
[n]	N. Simos, P. K. Job, and N. V. Mokhov, “An Experimental Study of Radiation-induced Demagnetization of Insertion Device Permanent Magnets”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC053, pp. 2112-2114. 
[n]	N. Wang, Z. Duan, S. K. Tian, and H. S. Xu, “Analytical Estimation of the Beam Ion Instability in HEPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3231-3233. doi:10.18429/JACoW-IPAC2018-THPAK014
[n]	S. P. Zhang, J. Y. Li, and C. Meng, “Bunching System Optimization Based on MOGA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1018-1020. doi:10.18429/JACoW-IPAC2019-MOPTS073
[n]	E. Rojatti, G. M. A. Calvi, L. Lanzavecchia, A. Parravicini, and C. Viviani, “Study of the Radiation Damage on a Scintillating Fibers Based Beam Profile Monitor”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 512-515. doi:10.18429/JACoW-IBIC2016-TUPG68
[n]	M. H. Nasr and S. G. Tantawi, “Corrections of Klystron Output Pulse in SW Accelerator Testing”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3772-3773. doi:10.18429/JACoW-IPAC2019-THPGW084
[n]	A. Crisol et al., “ALBA BL20 New Monochromator Design”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 14. doi:10.18429/JACoW-MEDSI2020-MOOB02
[n]	A. G. Golovkina, I. V. Kudinovich, D. A. Ovsyannikov, and Y. A. Svistunov, “The Problems of Accelerator-Driver Design for ADS”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 486-489. doi:10.18429/JACoW-RUPAC2016-WEPSB055
[n]	M. A. Leitner, C. M. Lyneis, and D. C. Wutte, “Design of the Extraction System of the Superconducting ECR Ion Source VENUS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPB004, pp. 67-69. 
[n]	J. Alessi, E. Beebe, A. Kponou, A. I. Pikin, and K. Prelec, “Heavy Ion Extraction from the BNL High Current EBIS Teststand”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B06, pp. 1589-1591. 
[n]	A. S. Alexandrova and C. P. Welsch, “Beam Characterization Using Laser Self-Mixing”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 516-520. doi:10.18429/JACoW-IBIC2015-TUPB070
[n]	M. J. Lamm et al., “4-Coil Superconducting Helical Solenoid Model for MANX”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP059, pp. 265-267. 
[n]	M. Mu??oz, D. Einfeld, and Z. Mart?¡, “Effect of the Measured Magnetic Multipoles in the ALBA Lattice”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP070, pp. 3868-3870. 
[n]	M. Kastriotou, E. B. Holzer, E. Nebot Del Busto, M. J. Boland, and C. P. Welsch, “An Optical Fibre BLM System at the Australian Synchrotron Light Source”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 669-672. doi:10.18429/JACoW-IBIC2016-WEPG20
[n]	A. Xiao, M. Borland, L. Emery, M. S. Jaski, and V. Sajaev, “Beam Dynamics Study of the Intermediate Energy X-Ray Wiggler for the Advanced Photon Source”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP064, pp. 1594-1596. 
[n]	D. Reschke et al., “High Gradients in 3 GHz Nine-Cell Cavities for Superconducting Linear Colliders”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F17, pp. XX-XX. 
[n]	A. Burrill et al., “Challenges Encountered during the Processing of the BNL ERL 5 Cell Accelerating Cavity”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS088, pp. 2541-2543. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search