JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. C. Dooling et al., “Collimation and Machine Protection for Low Emittance Rings”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 196-201. doi:10.18429/JACoW-IBIC2022-TU2T1
[n]	S.-H. Kim, M. Doleans, J. Galambos, M. P. Howell, and J. D. Mammosser, “Superconducting Linac Upgrade Plan for the Second Target Station Project at SNS”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB069, pp. 268-271. 
[n]	R. Kuroda et al., “Development of Photocathode RF Gun and Laser System for Multi-collision Laser Compton Scattering”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN051, pp. 1037-1039. 
[n]	V. P. Romas, V. V. Zakutin, A. N. Dovbnya, N. G. Reshethyak, and M. A. Krasnogolovets, “PULSE MODULATORS FOR FEEDING MAGNETRON GUNS”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP010, pp. XX-XX. 
[n]	E. R. Moog et al., “A Phase Shifter for Inline Undulators at the Advanced Photon Source Upgrade Project”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3830-3833. doi:10.18429/JACoW-IPAC2021-THPAB040
[n]	A. Fukasawa et al., “Commissioning a 1.5-m linac and its application in UCLA Mithra Laboratory”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS106, unpublished. 
[n]	Z. Zhu, C. Feng, M. Cai, and N. Huang, “Intelligent online optimization in X-ray free-electron lasers”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOOD2, unpublished. 
[n]	N. Jobert, E. Fonda, T. Moreno, and M. Ribbens, “Optomechanical Optimization for a Sagittaly Bent Double Crystal Monochromator, Using Finite Elements and Ray Tracing”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 231-234. doi:10.18429/JACoW-MEDSI2018-WEPH14
[n]	C. I. Briegel, R. Neswold, and M. Z. Sliczniak, “A Protocol for Streaming Large Messages with UDP”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 693-696. doi:10.18429/JACoW-ICALEPCS2015-WEPGF002
[n]	S. Heidrich, K. Aulenbacher, M. W. Bruker, M. Dehn, and P. Heil, “High-Current Emittance Measurements at MAMI”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4121-4123. doi:10.18429/JACoW-IPAC2019-THPTS009
[n]	J. C. Dooling, L. Donley, G. E. McMichael, F. R. Brumwell, and V. F. Stipp, “Beam Analysis Using the IPNS Linac ESEM”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP61, pp. 405-407. 
[n]	A. Maekawa et al., “Monoenergetic 200fs (FWHM) Electron Bunch Measurement from the Laser Plasma Cathode”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS029, pp. 2451-2453. 
[n]	J. Dinkel and R. Reilly, “An Upgraded Proton Injection Kicker Magnet for the Fermilab MIR”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAA05, pp. 1236-1238. 
[n]	J. Callahan, A. Rodriguez Alicea, J. Mendez, L. Cultrera, O. Chubenko, and S. Karkare, “Monte Carlo modeling of spin-polarized photoemission from GaAs with low-temperature and strained-lattice effects”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2119-2122. doi:10.18429/JACoW-IPAC2024-WEPC65
[n]	S. Schreiber, C. Gruen, K. Klose, J. Roensch, and B. Steffen, “Simultaneous Operation of Three Laser Systems at the FLASH Photoinjector”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 459-463. doi:10.18429/JACoW-FEL2015-TUP041
[n]	I. D. Valova, “Cubes in OLAP Systems”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP065, pp. 3354-3354. 
[n]	T. W. Eagar, “Resistive Measurements on an Improved Nb-A1-Ge Superconducting Ribbon”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 742-744. 
[n]	L. Zhang, “Preliminary Absorber Design for the Ultimate Storage Ring Light Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO028, pp. 2592-2594. 
[n]	A. Jankowiak et al., “The First Two Years of Operation of the 1.5 GeV CW Electron Accelerator MAMI C”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP111, pp. 2772-2774. 
[n]	A. A. Zavadtsev, D. Churanov, D. A. Zavadtsev, and D. A. Zybin, “Solid-State Modulators for Particle Accelerators”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 600-602. doi:10.18429/JACoW-RUPAC2016-THPSC027
[n]	V. I. Gordin, R. N. Litunovsky, A. K. Vaganov, V. S. Vasil, and D. V. Efremov, “The Diagnostics of the Beam Phase Characteristics of the 240 cm Isochronous Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-26, pp. 2401-2402. 
[n]	N. I. Aizatsky, A. N. Dovbnya, V. V. Zakutin, N. G. Reshetnyak, N. A. Dovbnya, and I. A. Chertishchev, “CONTROLLING THE BEAM OF THE MAGNETRON GUN WITH A SECONDARY-EMISSION CATHODE BY MEANS OF A MAGNETIC FIELD OF THE SOLENOID AND PERMANENT RING-SHAPED MAGNETS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper THAPH05, pp. XX-XX. 
[n]	N. Yu. Kazarinov et al., “Design and Simulation of the Axial Injection Beam Line of DC140 Cyclotron of FLNR JINR”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1852-1854. doi:10.18429/JACoW-IPAC2021-TUPAB191
[n]	Z. Shao, T. Zhang, Z. Dong, S. Dong, L. Wang, and Y. Lu, “Research on key technologies for resonance injection of a compact X-ray light source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3816-3818. doi:10.18429/JACoW-IPAC2024-THPS36
[n]	V. N. Boriskin, A. N. Dovbnya, and A. N. Savchenko, “The Computer Diagnostics of Linac Unit Failures”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP056L, pp. 1789-1790. 
[n]	C.-H. Chang et al., “In-Achromatic Superconducting Wiggler in Taiwan Light Source: Installation and Test Results”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS139, pp. 3613-3615. 
[n]	Y. V. Krylov, E. V. Kaportsev, K. Moseev, N. I. Moseiko, and A. G. Valentinov, “The Automation of Energy Ramping for the Main Storage Ring of KSRS”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 597-599. doi:10.18429/JACoW-RUPAC2016-THPSC026
[n]	A. Pathak, J.-F. Ostiguy, and O. Napoly, “Space charge dominated momentum spread and compensation strategies in the post-linac section of Proton Improvement Plan-II at Fermilab”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3023-3026. doi:10.18429/JACoW-IPAC2024-THPC22
[n]	R. A. Kostin et al., “Balloon Cavity Design With Integrated Ports for Electropolishing”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper MOPCAV003, pp.. 
[n]	A. J. Gee and B. Erdelyi, “Study and Comparison of the Method of Moments and the Single Level Fast Multipole Method for 2D Space Charge Tracking”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA15, pp. 207-209. 
[n]	B. E. Chase and R. J. Pasquinelli, “VXI Based Low Level RF System for Fermilab Linac Upgrade”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2355-2358. 
[n]	A. J. Gonsalves et al., “Longitudinal Density Tailoring for the Enhancement of Electron Beams in the Capillary-Discharge Laser-Guided Wakefield Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH4GBC03, pp. 3154-3156. 
[n]	Z. G. Zong et al., “Research and development of 1.3 GHz low loss cavities made of China large grain at IHEP”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP34, pp. XX-XX. 
[n]	A. S. Smygacheva, Ye. Fomin, V. Korchuganov, V. A. Ushakov, and A. G. Valentinov, “2.5 GeV Booster Synchrotron for a New Kurchatov Synchrotron Radiation Source”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 293-296. doi:10.18429/JACoW-RuPAC2021-TUPSB33
[n]	T. Kikuchi, T. Katayama, and S. Kawata, “Influences of Space Charge Effect during Ion Accumulation Using Moving Barrier Bucket Cooperated with Beam Cooling”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THAP19, pp. 206-209. 
[n]	F. M. Bieniosek, K. Anderson, and K. Fullett, “Requirements for a Beam Sweeping System for the Fermilab Antiproton Source Target”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR17, pp. 1939-1941. 
[n]	H. C. Ho et al., “An Assembling Calibration Method of XBPM Diamond Blades in TPS”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 54-56. doi:10.18429/JACoW-MEDSI2016-MOPE23
[n]	J. Walton, R. Dixon, H. Edwards, and J. McCarthy, “A Superconducting Dipole for the Fermilab Switchyard”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4056-4058. 
[n]	R. A. Kostin and C. Jing, “Conduction Cooled SRF Photogun for Electron Microscopy”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper MOPTEV001, pp.. 
[n]	J. D. Sethian, R. A. Mahaffey, R. A. Meger, and D. N. Spector, “Collective Ion Acceleration Produced by Injecting a Rotating Relavistic Electron Beam into Neutral Hydrogen”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4193-4196. 
[n]	J. Carwardine, “Physics Requirements for Linac Stabilizations and Technical Solutions”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper WEOB03, pp. 433-437. 
[n]	R. Giacone et al., “Generation of Single Pulse Particle Beams in a Plasma Channel by Laser Injection in Laser Wakefield Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG039, pp. 1885-1887. 
[n]	M. Xiao, “Measurements and Corrections of the Recycler Lattice at Fermilab”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA13, pp. 82-84. 
[n]	A. S. Zabanov et al., “Simulation of the Electrostatic Deflector of DC140 Cyclotron”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 202-204. doi:10.18429/JACoW-RuPAC2021-MOPSA48
[n]	N. N. Alexeev et al., “Upgrade of Heavy Ion Injector I-3 at ITEP”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 346-348. doi:10.18429/JACoW-LINAC2018-TUPO011
[n]	E. W. Blackmore et al., “Improved Beam Quality at TRIUMF”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3218-3221. 
[n]	Q. Gu, Q. G. Zhou, Z. M. Dai, D. M. Li, and Z. T. Zhao, “Design of an Intense THz Light Source Based on Femto-Second Electron Bunches”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11008, pp. XX-XX. 
[n]	S. M. Hanna and P. M. Stefan, “Characterization of NSLS Accelerating Cavities Using Impedance Measurement Techniques”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 895-898. 
[n]	S. V. Plotnikov et al., “First Section of a 352 MHz Prototype Alvarez DTL Tank for the CERN SPL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS055, pp. 1621-1623. 
[n]	D. Churanov et al., “RELUS-5 ELECTRON LINAC START-UP”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUAPH05, pp. XX-XX. 
[n]	T.-C. Fan, C.-S. Hwang, F.-Y. Lin, and I. C. Hsu, “Pulsed Wire Magnetic Field Measurements on Undulator U10p”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH302, pp. 2775-2777. 
[n]	A. Cabrespine and C. Goldstein, “The Orsay Heavy Ion Accelerator (ALICE)”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper I-3, pp. 973-980. 
[n]	D. Churanov, A. Krasnov, M. Urbant, A. Zavadtsev, and D. Zavadtsev, “SOLID STATE MODULATOR FOR LINEAR ACCELERATORS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH11, pp. XX-XX. 
[n]	O. Boine-Frankenheim and O. Chorniy, “RF Barrier Compression with Space Charge for the FAIR Synchrotrons”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP021, pp. 3236-3238. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search