Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. D. Ryne, “Advanced Computers and Simulation”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3229-3234.
[n] E. D. Hudson, “Helical Axial Injection Concept for Cyclotrons”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper DP-11, pp. 311-313.
[n] J. Takano et al., “DEVELOPMENT OF A GAS-SHEET BEAM PROFILE MONITOR”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP018, pp. XX-XX.
[n] M. Boutheon, F. Di Maio, and A. Pace, “General Man-Machine Interface Used in Accelerators Controls: Some Applications in CERN-PS Control Systems Rejuvenation”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 452-455. doi:10.18429/JACoW-ICALEPCS1991-S13MMI02
[n] R. J. Yarema and R. L. Cassel, “NAL Quadrupole Power Supply Active Filter”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 414-416.
[n] K. Brown et al., “Design of a Resonant Extraction System for the AGS Booster”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA83, pp. 1270-1272.
[n] R. E. Thern and A. Stillman, “Full Cycle Beam Diagnostics with an Ionization Profile Monitor”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2471-2474.
[n] R. H. Helm, G. A. Loew, R. H. Miller, and R. B. Neal, “Recent Developments at SLAC”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper G-8, pp. 673-693.
[n] T. J. Shea, M. A. Goldman, and R. E. Sikora, “Preliminary Studies on a Magneto-Optical Procedure for Aligning RHIC Magnets”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2916-2919.
[n] J. F. Power, B. Blind, and A. J. Jason, “The Los Alamos Proton Storage Ring Fast-Extraction Kicker System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3021-3024.
[n] M. J. Lee, S. H. Clearwater, S. D. Kleban, and L. J. Selig, “Error-Finding and Error-Correcting Methods for the Start-UP of the SLC”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1334-1337.
[n] E. Bozoki, A. Friedman, and S. Ramamoorthy, “First Results with a Nonlinear Digital Orbit Feedback System at the NSLS”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ14, pp. 2696-2698.
[n] R. F. Lambiase, W. Buxton, B. Oerter, S. Peng, J. Pepe, and J. Smith, “Performance Results for the BNL PSI Designed for the SNS and it's Application to Other Accelerators”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE120, pp. 2493-2495.
[n] R. Assmann et al., “A Fast and Accurate Phasing Algorithm for the RF Accelerating Voltages of the SLAC Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP11H, pp. 448-450.
[n] R. L. Geng, J. F. Fischer, E. A. McEwen, and O. Trofimova, “Nature and Implication of Found Actual Particulates on the Inner Surface of Cavities in a Full-Scale Cryomodule Previously Operated With Beams”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB035, pp. 164-168.
[n] G. Rakowsky, J. Aspenleiter, R. Carr, R. Ruland, and S. Lidia, “Measurement and Optimization of the VISA Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA35, pp. 2698-2700.
[n] J. Y. Liu, H. B. Chen, A. Grudiev, J. Shi, and H. Zha, “Wakefield Suppression in the Main LINAC of the Klystron-Based First Stage of CLIC at 380 GeV”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2899-2902. doi:10.18429/JACoW-IPAC2019-WEPRB043
[n] D. Monteiro, R. Barillère, N. Bunijevac, and I. Rühl, “Controls Optimization for Energy Efficient Cooling and Ventilation at CERN”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1465-1469. doi:10.18429/JACoW-ICALEPCS2023-THPDP062
[n] O. Singh, Y. Tang, S. Ramamoorthy, S. Krinsky, and L. H. Yu, “Global Orbit Feedback Utilizing Analog and Digital Technologies”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7PC005, pp. XX-XX.
[n] S. Giordano and M. Puglisi, “A Cathode Follower Power Amplifier”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3408-3411.
[n] M. Di Giacomo, A. Orduz, C. Jamet, J.-F. Leyge, and P. Salou, “Phase setting issues for the SPIRAL2 LINAC”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 383-386. doi:10.18429/JACoW-LINAC2024-TUPB025
[n] C. Xu, E. Blomley, A.-S. Müller, A. Santamaria Garcia, and M. Zhang, “Integration of an Optimizer Framework into the Control System at KARA”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 570-574. doi:10.18429/JACoW-ICALEPCS2023-TUPDP030
[n] E. R. Beadle, “A General Purpose Fiber Optic Link with Radiation Resistance”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB09, pp. 2548-2550.
[n] G. Wu et al., “ECR Plasma Cleaning: An In-situ Processing Technique for RF Cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP49, pp. XX-XX.
[n] H. Gassot, “Topological Optimization on SRF Cavities for Nuclear and High Energy Physics”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1162-1164. doi:10.18429/JACoW-IPAC2021-MOPAB379
[n] H. Hinterberger, S. Pruss, J. Satti, J. Schivell, C. Schmidt, and R. Sheldon, “Quadrupole Magnets of the NAL Main Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 857-860.
[n] A. Orduz et al., “Commissioning and operation of the SPIRAL2 SC linac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5187-5192. doi:10.18429/JACoW-IPAC2023-FRXD3
[n] F. E. Hannon, I. V. Bazarov, B. M. Dunham, Y. Li, and X. G. Liu, “Phase Space Tomography Using the Cornell ERL DC Gun”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC032, pp. 1119-1121.
[n] H. Lustfeld, U. Funk, Ph. Meads, L. Schepers, and G. W??stefeld, “A Proper Canonical Algebraic Mapping Transformation”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0016, pp. 130-131.
[n] A. G. Hinton et al., “Development of a Short Period Superconducting Helical Undulator”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2788-2791. doi:10.18429/JACoW-IPAC2022-THPOTK010
[n] E. Traykov, N. Arbor, C. Finck, Q. RAFFY, and M. Vanstalle, “Production of short-lived neutron-rich beams for hadron therapy”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5052-5055. doi:10.18429/JACoW-IPAC2023-THPM067
[n] S. L. Birch, A. Morris, and S. P. Stoneham, “Power Converters for the ISIS Second Target Station Project (TS-2)”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS119, pp. 2655-2657.
[n] O. C. Dermois, T. J. P. Ellison, and D. L. Friesel, “The Indiana University Cyclotron Facility Electron Cooling System”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper C-08, pp. 153-156.
[n] K. Ko et al., “Design Parameters for the Damped Detuned Accelerating Structure”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA04, pp. 1058-1060.
[n] P. B. Wilson, Z. D. Farkas, H. A. Hogg, and E. W. Hoyt, “Recent Measurements at SLAC on Superconducting Niobium X-Band Cavities”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 104-108.
[n] J. Schivell and C. Schmidt, “Alignment Techniques for the NAL Main Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 994-997.
[n] D. J. Ciardullo and J. M. Brennan, “The Average Orbit System Upgrade for the Brookhaven AGS”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ30, pp. 2518-2520.
[n] L. A. Dyks et al., “Consolidation and Future Upgrades to the CLEAR User Facility at CERN”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2700-2703. doi:10.18429/JACoW-IPAC2021-WEPAB043
[n] M. L. Mallory, E. D. Hudson, and R. S. Lord, “Isochronous Cyclotron Harmonic Beam Experiments”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1694-1697.
[n] F.-J. Decker, M. Stanek, H. Smith, and F. Tian, “Diagnostic Beam Pulses for Monitoring the SLC Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC20, pp. 2646-2648.
[n] A. Devred et al., “First Computation of Parasitic Fields in LHC Dipole Magnet Interconnects”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS101, pp. 2613-2615.
[n] J. Fernandez Cortes, E. Blanco Vinuela, J. Beckers, O. Kozinski, and P. Durand, “Integration of new cryogenic plants into an existing control system: a scalable and standardized approach”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1331-1337. doi:10.18429/JACoW-ICALEPCS2025-THAR004
[n] R. L. Cassel and J. E. Van Ness, “Direct Powering of the 200 - Ge V Synchrotron Magnets from the Utility System”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 672-677.
[n] I. Gusdal et al., “The University of Manitoba Cyclotron Facility”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2724-2727.
[n] Y. Hashimoto et al., “Development of a Non-Destructive Beam Profile Monitor Using a Gas Sheet”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH308, pp. 1631-1633.
[n] U. Dorda et al., “Optimized Beam Optics Design of the MINERVA/MYRRHA Superconducting Proton Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 337-340. doi:10.18429/JACoW-LINAC2022-TUPOJO03
[n] A. R. Donaldson, R. L. Cassel, T. S. Mattison, and L. L. Reginato, “Kicker Thyatron Experience from SLC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3165-3168.
[n] Y. Hao and V. Ptitsyn, “Frequency Scaling Study of Crab Cavity for Future Colliders with Crab Crossing”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2532-2534. doi:10.18429/JACoW-IPAC2016-WEPMW043
[n] R. C. Trendler and J. M. Bogaty, “The Horizontal and Vertical Damper Systems at the Zero Gradient Synchrotron and Their Performance Characteristics”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1082-1084.
[n] D. Li, S. Y. Lee, J. Budnick, and T. Hall, “Design and Fabrication of a Multi-Purpose Panofsky Magnet”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2865-2868.
[n] M. L. Mallory and E. D. Hudson, “A Rotatable Cold Cathode Penning Ion Source”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1669-1672.
[n] F. J. Decker, R. K. Jobe, N. Merminga, and K. A. Thompson, “Controlling Multi-Bunches by a Fast Phase Switching”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU423, pp. 364-366.
[n] E. Kikutani, S. Kurokawa, Y. Minagawa, and M. Tobiyama, “A Systematic Study of a Transverse Feedback System with a Two-Tap FIR Filter”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP057L, pp. 1896-1898.
[n] P. Mortazavi and D. Shu, “Thermal Conductance of Metallic Interface in Vacuum”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1891-1893.
[n] W. Gilbert et al., “A 9.1-T Iron-Free Nb-Ti Dipole Magnet with Pancake Windings”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2578-2581.
[n] S. Ramamoorthy, S. Buda, J. Oliva, and G. Ramirez, “PLC Interface to NSLS Front-End Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP511, pp. XX-XX.
[n] X. Chen et al., “Development of Power Coupler for Superconducting Spoke Cavities for China ADS Proton Linac”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP050, pp. 1024-1026.
[n] J. Anderson et al., “Upgrading the University of Manitoba Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J39, pp. 461-464.
[n] M. Puglisi and M. Cornacchia, “Pulsed RF Operation Analysis”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2729-2733.
[n] M. A. Drury et al., “Acceptance Testing of the First Group of LCLS II Cryomodules at Jefferson Lab”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3965-3967. doi:10.18429/JACoW-IPAC2018-THPAL137
[n] B. C. Jiang, J. Hou, C. X. Yin, and Z. T. Zhao, “Status of the SSRF Fast Orbit Feedback System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP065, pp. 2855-2857.
[n] W. T. Weng and M. Diwan, “Neutrino Beam Facilities and Projects”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAD001, pp. 429-433.
[n] K. Hasegawa et al., “LIPAc (linear IFMIF prototype accelerator) beam commissioning & future plans”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 15-20. doi:10.18429/JACoW-IPAC2023-MOYD2
[n] R. Assmann, F. J. Decker, and P. Raimondi, “Improvements in Emittance Wakefield Optimization for the SLAC Linear Collider”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP10H, pp. 445-447.
[n] G. Decker, P. K. Den Hartog, G. Rosenbaum, and O. Singh, “Progress toward a Hard X-ray Insertion Device Beam Position Monitor at the Advanced Photon Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN106, pp. 4342-4344.
[n] K. Hedblom and D. L. Friesel, “Stripping Injection Into the New Booster Ring at IUCF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAQ08, pp. 1861-1863.
For LaTeX
Use Complete Form
For BibTeX
References
- R. D. Ryne, “Advanced Computers and Simulation”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3229-3234.
- E. D. Hudson, “Helical Axial Injection Concept for Cyclotrons”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper DP-11, pp. 311-313.
- J. Takano et al., “DEVELOPMENT OF A GAS-SHEET BEAM PROFILE MONITOR”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP018, pp. XX-XX.
- M. Boutheon, F. Di Maio, and A. Pace, “General Man-Machine Interface Used in Accelerators Controls: Some Applications in CERN-PS Control Systems Rejuvenation”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S13MMI02, pp. 452-455.
- R. J. Yarema and R. L. Cassel, “NAL Quadrupole Power Supply Active Filter”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 414-416.
- K. Brown et al., “Design of a Resonant Extraction System for the AGS Booster”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA83, pp. 1270-1272.
- R. E. Thern and A. Stillman, “Full Cycle Beam Diagnostics with an Ionization Profile Monitor”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2471-2474.
- R. H. Helm, G. A. Loew, R. H. Miller, and R. B. Neal, “Recent Developments at SLAC”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper G-8, pp. 673-693.
- T. J. Shea, M. A. Goldman, and R. E. Sikora, “Preliminary Studies on a Magneto-Optical Procedure for Aligning RHIC Magnets”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2916-2919.
- J. F. Power, B. Blind, and A. J. Jason, “The Los Alamos Proton Storage Ring Fast-Extraction Kicker System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3021-3024.
- M. J. Lee, S. H. Clearwater, S. D. Kleban, and L. J. Selig, “Error-Finding and Error-Correcting Methods for the Start-UP of the SLC”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1334-1337.
- E. Bozoki, A. Friedman, and S. Ramamoorthy, “First Results with a Nonlinear Digital Orbit Feedback System at the NSLS”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ14, pp. 2696-2698.
- R. F. Lambiase, W. Buxton, B. Oerter, S. Peng, J. Pepe, and J. Smith, “Performance Results for the BNL PSI Designed for the SNS and it's Application to Other Accelerators”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE120, pp. 2493-2495.
- R. Assmann et al., “A Fast and Accurate Phasing Algorithm for the RF Accelerating Voltages of the SLAC Linac”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP11H, pp. 448-450.
- R. L. Geng, J. F. Fischer, E. A. McEwen, and O. Trofimova, “Nature and Implication of Found Actual Particulates on the Inner Surface of Cavities in a Full-Scale Cryomodule Previously Operated With Beams”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB035, pp. 164-168.
- G. Rakowsky, J. Aspenleiter, R. Carr, R. Ruland, and S. Lidia, “Measurement and Optimization of the VISA Undulator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA35, pp. 2698-2700.
- J. Y. Liu, H. B. Chen, A. Grudiev, J. Shi, and H. Zha, “Wakefield Suppression in the Main LINAC of the Klystron-Based First Stage of CLIC at 380 GeV”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2899-2902.
- D. Monteiro, R. Barillère, N. Bunijevac, and I. Rühl, “Controls Optimization for Energy Efficient Cooling and Ventilation at CERN”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP062, pp. 1465-1469.
- O. Singh, Y. Tang, S. Ramamoorthy, S. Krinsky, and L. H. Yu, “Global Orbit Feedback Utilizing Analog and Digital Technologies”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7PC005, pp. XX-XX.
- S. Giordano and M. Puglisi, “A Cathode Follower Power Amplifier”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3408-3411.
- M. Di Giacomo, A. Orduz, C. Jamet, J.-F. Leyge, and P. Salou, “Phase setting issues for the SPIRAL2 LINAC”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 383-386.
- C. Xu, E. Blomley, A.-S. Müller, A. Santamaria Garcia, and M. Zhang, “Integration of an Optimizer Framework into the Control System at KARA”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP030, pp. 570-574.
- E. R. Beadle, “A General Purpose Fiber Optic Link with Radiation Resistance”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPB09, pp. 2548-2550.
- G. Wu et al., “ECR Plasma Cleaning: An In-situ Processing Technique for RF Cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP49, pp. XX-XX.
- H. Gassot, “Topological Optimization on SRF Cavities for Nuclear and High Energy Physics”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1162-1164.
- H. Hinterberger, S. Pruss, J. Satti, J. Schivell, C. Schmidt, and R. Sheldon, “Quadrupole Magnets of the NAL Main Accelerator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 857-860.
- A. Orduz et al., “Commissioning and operation of the SPIRAL2 SC linac”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper FRXD3, pp. 5187-5192.
- F. E. Hannon, I. V. Bazarov, B. M. Dunham, Y. Li, and X. G. Liu, “Phase Space Tomography Using the Cornell ERL DC Gun”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC032, pp. 1119-1121.
- H. Lustfeld, U. Funk, Ph. Meads, L. Schepers, and G. W??stefeld, “A Proper Canonical Algebraic Mapping Transformation”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0016, pp. 130-131.
- A. G. Hinton et al., “Development of a Short Period Superconducting Helical Undulator”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2788-2791.
- E. Traykov, N. Arbor, C. Finck, Q. RAFFY, and M. Vanstalle, “Production of short-lived neutron-rich beams for hadron therapy”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM067, pp. 5052-5055.
- S. L. Birch, A. Morris, and S. P. Stoneham, “Power Converters for the ISIS Second Target Station Project (TS-2)”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS119, pp. 2655-2657.
- O. C. Dermois, T. J. P. Ellison, and D. L. Friesel, “The Indiana University Cyclotron Facility Electron Cooling System”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper C-08, pp. 153-156.
- K. Ko et al., “Design Parameters for the Damped Detuned Accelerating Structure”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA04, pp. 1058-1060.
- P. B. Wilson, Z. D. Farkas, H. A. Hogg, and E. W. Hoyt, “Recent Measurements at SLAC on Superconducting Niobium X-Band Cavities”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 104-108.
- J. Schivell and C. Schmidt, “Alignment Techniques for the NAL Main Accelerator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 994-997.
- D. J. Ciardullo and J. M. Brennan, “The Average Orbit System Upgrade for the Brookhaven AGS”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ30, pp. 2518-2520.
- L. A. Dyks et al., “Consolidation and Future Upgrades to the CLEAR User Facility at CERN”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2700-2703.
- M. L. Mallory, E. D. Hudson, and R. S. Lord, “Isochronous Cyclotron Harmonic Beam Experiments”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1694-1697.
- F.-J. Decker, M. Stanek, H. Smith, and F. Tian, “Diagnostic Beam Pulses for Monitoring the SLC Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPC20, pp. 2646-2648.
- A. Devred et al., “First Computation of Parasitic Fields in LHC Dipole Magnet Interconnects”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS101, pp. 2613-2615.
- J. Fernandez Cortes, E. Blanco Vinuela, J. Beckers, O. Kozinski, and P. Durand, “Integration of new cryogenic plants into an existing control system: a scalable and standardized approach”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1331-1337.
- R. L. Cassel and J. E. Van Ness, “Direct Powering of the 200 - Ge V Synchrotron Magnets from the Utility System”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 672-677.
- I. Gusdal et al., “The University of Manitoba Cyclotron Facility”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2724-2727.
- Y. Hashimoto et al., “Development of a Non-Destructive Beam Profile Monitor Using a Gas Sheet”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH308, pp. 1631-1633.
- U. Dorda et al., “Optimized Beam Optics Design of the MINERVA/MYRRHA Superconducting Proton Linac”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 337-340.
- A. R. Donaldson, R. L. Cassel, T. S. Mattison, and L. L. Reginato, “Kicker Thyatron Experience from SLC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3165-3168.
- Y. Hao and V. Ptitsyn, “Frequency Scaling Study of Crab Cavity for Future Colliders with Crab Crossing”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2532-2534.
- R. C. Trendler and J. M. Bogaty, “The Horizontal and Vertical Damper Systems at the Zero Gradient Synchrotron and Their Performance Characteristics”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1082-1084.
- D. Li, S. Y. Lee, J. Budnick, and T. Hall, “Design and Fabrication of a Multi-Purpose Panofsky Magnet”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2865-2868.
- M. L. Mallory and E. D. Hudson, “A Rotatable Cold Cathode Penning Ion Source”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1669-1672.
- F. J. Decker, R. K. Jobe, N. Merminga, and K. A. Thompson, “Controlling Multi-Bunches by a Fast Phase Switching”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU423, pp. 364-366.
- E. Kikutani, S. Kurokawa, Y. Minagawa, and M. Tobiyama, “A Systematic Study of a Transverse Feedback System with a Two-Tap FIR Filter”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP057L, pp. 1896-1898.
- P. Mortazavi and D. Shu, “Thermal Conductance of Metallic Interface in Vacuum”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1891-1893.
- W. Gilbert et al., “A 9.1-T Iron-Free Nb-Ti Dipole Magnet with Pancake Windings”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2578-2581.
- S. Ramamoorthy, S. Buda, J. Oliva, and G. Ramirez, “PLC Interface to NSLS Front-End Systems”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP511, pp. XX-XX.
- X. Chen et al., “Development of Power Coupler for Superconducting Spoke Cavities for China ADS Proton Linac”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP050, pp. 1024-1026.
- J. Anderson et al., “Upgrading the University of Manitoba Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J39, pp. 461-464.
- M. Puglisi and M. Cornacchia, “Pulsed RF Operation Analysis”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2729-2733.
- M. A. Drury et al., “Acceptance Testing of the First Group of LCLS II Cryomodules at Jefferson Lab”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3965-3967.
- B. C. Jiang, J. Hou, C. X. Yin, and Z. T. Zhao, “Status of the SSRF Fast Orbit Feedback System”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP065, pp. 2855-2857.
- W. T. Weng and M. Diwan, “Neutrino Beam Facilities and Projects”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WOAD001, pp. 429-433.
- K. Hasegawa et al., “LIPAc (linear IFMIF prototype accelerator) beam commissioning & future plans”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOYD2, pp. 15-20.
- R. Assmann, F. J. Decker, and P. Raimondi, “Improvements in Emittance Wakefield Optimization for the SLAC Linear Collider”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP10H, pp. 445-447.
- G. Decker, P. K. Den Hartog, G. Rosenbaum, and O. Singh, “Progress toward a Hard X-ray Insertion Device Beam Position Monitor at the Advanced Photon Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN106, pp. 4342-4344.
- K. Hedblom and D. L. Friesel, “Stripping Injection Into the New Booster Ring at IUCF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAQ08, pp. 1861-1863.
Back to search