Favourites
For Word
[n] L. R. Carver et al., “Beam Power Deposition on the Cryogenic Permanent Magnet Undulator”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2556-2559. doi:10.18429/JACoW-IPAC2022-THPOPT002
[n] B. Li, “Study of the microbunching instability in the THz FEL at PITZ”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM105, unpublished.
[n] J. Claus, “Particle Loss during Adiabatic Capture”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1075-1077.
[n] X. J. Nie et al., “Design of the Two-Layer Girder for Accelerating Tube”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3636-3637. doi:10.18429/JACoW-IPAC2021-WEPAB397
[n] H. Timko, J. F. Esteban Muller, A. Lasheen, and D. Quartullo, “Benchmarking the Beam Longitudinal Dynamics Code BLonD”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3094-3097. doi:10.18429/JACoW-IPAC2016-WEPOY045
[n] R. P. Fliller et al., “Application of Machine Learning to Minimize Long Term Drifts in the NSLS-II Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1867-1869. doi:10.18429/JACoW-IPAC2018-WEPAF022
[n] H. Padamsee et al., “Accelerating Cavity Development for the Cornell B-Factory, CESR-B”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 786-789.
[n] R. Gebel, O. Felden, R. Maier, S. Mey, and D. Prasuhn, “Preparation of an Ion Source for an Extra Low Energy Synchrotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3755-3757. doi:10.18429/JACoW-IPAC2015-THPF029
[n] G. Ravida, O. Brunner, and D. Valuch, “Performance of the Crowbar of the LHC High Power RF System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD056, pp. 3641-3643.
[n] K. C. Liao, L. Arnaudon, O. Brunner, E. Ciapala, D. C. Glenat, and W. Weingarten, “Design and Development of an Octopus Thermometric System for the 704 MHz Single-cell SPL Cavity at CERN”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC029, pp. 2266-2268.
[n] S. Savazzi et al., “Implementation of RF-KO Extraction at CNAO”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3469-3471. doi:10.18429/JACoW-IPAC2019-THPMP010
[n] M. Satoh et al., “Control System Status of SuperKEKB Injector Linac”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1522-1525. doi:10.18429/JACoW-ICALEPCS2017-THPHA064
[n] D. Filippetto et al., “APEX Initial Commissioning Results”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEOAI01, pp. 337-344.
[n] J. V. Campelo et al., “An Extended SPS Longitudinal Impedance Model”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 360-362. doi:10.18429/JACoW-IPAC2015-MOPJE035
[n] S. Greenwald, Z. Greenwald, D. Hartill, J. Kirchgessner, D. Morse, and D. Rice, “RF Cavity Design for High Current Operation of the Cornell Electron Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 226-229.
[n] S. Savazzi et al., “Optics and Commissioning of the CNAO Experimental Beam Line”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3472-3474. doi:10.18429/JACoW-IPAC2019-THPMP011
[n] S. Belomestnykh et al., “Commissioning of the Superconducting RF Cavities for the CESR Luminosity Upgrade”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP135, pp. 980-982.
[n] J. Burns, “Magnet Design for the DARHT Linear Induction Accelerators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2110-2113.
[n] C. Steier et al., “Status of the ALS Upgrade”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOCS3, pp. 769-771.
[n] J. Feng et al., “Drive Laser System for the Advanced Photo-Injector Project at the LBNL”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP222, pp. 2537-2539.
For LaTeX
Use Complete Form
For BibTeX
References
- L. R. Carver et al., “Beam Power Deposition on the Cryogenic Permanent Magnet Undulator”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2556-2559.
- B. Li, “Study of the microbunching instability in the THz FEL at PITZ”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM105, this conference.
- J. Claus, “Particle Loss during Adiabatic Capture”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1075-1077.
- X. J. Nie et al., “Design of the Two-Layer Girder for Accelerating Tube”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3636-3637.
- H. Timko, J. F. Esteban Muller, A. Lasheen, and D. Quartullo, “Benchmarking the Beam Longitudinal Dynamics Code BLonD”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3094-3097.
- R. P. Fliller et al., “Application of Machine Learning to Minimize Long Term Drifts in the NSLS-II Linac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1867-1869.
- H. Padamsee et al., “Accelerating Cavity Development for the Cornell B-Factory, CESR-B”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 786-789.
- R. Gebel, O. Felden, R. Maier, S. Mey, and D. Prasuhn, “Preparation of an Ion Source for an Extra Low Energy Synchrotron”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3755-3757.
- G. Ravida, O. Brunner, and D. Valuch, “Performance of the Crowbar of the LHC High Power RF System”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD056, pp. 3641-3643.
- K. C. Liao, L. Arnaudon, O. Brunner, E. Ciapala, D. C. Glenat, and W. Weingarten, “Design and Development of an Octopus Thermometric System for the 704 MHz Single-cell SPL Cavity at CERN”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC029, pp. 2266-2268.
- S. Savazzi et al., “Implementation of RF-KO Extraction at CNAO”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3469-3471.
- M. Satoh et al., “Control System Status of SuperKEKB Injector Linac”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1522-1525.
- D. Filippetto et al., “APEX Initial Commissioning Results”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper WEOAI01, pp. 337-344.
- J. V. Campelo et al., “An Extended SPS Longitudinal Impedance Model”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 360-362.
- S. Greenwald, Z. Greenwald, D. Hartill, J. Kirchgessner, D. Morse, and D. Rice, “RF Cavity Design for High Current Operation of the Cornell Electron Storage Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 226-229.
- S. Savazzi et al., “Optics and Commissioning of the CNAO Experimental Beam Line”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3472-3474.
- S. Belomestnykh et al., “Commissioning of the Superconducting RF Cavities for the CESR Luminosity Upgrade”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP135, pp. 980-982.
- J. Burns, “Magnet Design for the DARHT Linear Induction Accelerators”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2110-2113.
- C. Steier et al., “Status of the ALS Upgrade”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOCS3, pp. 769-771.
- J. Feng et al., “Drive Laser System for the Advanced Photo-Injector Project at the LBNL”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP222, pp. 2537-2539.
Back to search
