Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Kwiatkowski, M. Alsdorf, B. Dehning, W. Vigano, and C. Zamantzas, “A Gigabit Ethernet Link for an FPGA Based Beam Loss Measurement System”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC44, pp. 178-181.
[n] F. Becheri et al., “A tango based control system for a 3D measurement bench for magnets”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_054.
[n] V. A. Verzilov et al., “Status of Beam Diagnostic Systems for TRIUMF Electron Linac”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC06, pp. 361-364.
[n] T. Slaton, G. Mazaheri, and T. Shintake, “Development of Nanometer Resolution C-Band Radio Frequency Beam Position Monitors in the Final Focus Test Beam”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4064, pp. 911-913.
[n] J. McCarrick et al., “Electron Beam/Converter Target Interactions in Radiographic Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC009, pp. 563-567.
[n] T. S. Ueng, K. T. Hsu, C. S. Fang, Y. M. Chang, and K. K. Lin, “Turn-by-Turn Beam Position Measurement for 1.3 GeV Booster Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ32, pp. 2524-2526.
[n] B. D. Hartsell, M. R. Campbell, P. Hurh, M. D. Fitton, T. Ishida, and T. Nakadaira, “Design of a Compact Fatigue Tester for Testing Irradiated Materials”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3321-3323. doi:10.18429/JACoW-IPAC2015-WEPTY026
[n] L. Bojtar, “Antiproton Decelerator Status Report”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper MOM1MCIO02, pp. XX-XX.
[n] Y. Chung et al., “Closed Orbit Feedback with Digital Signal Processing”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1592-1595.
[n] C. Jamet, W. LC. Le Coz, G. Ledu, S. Loret, and C. Potier de courcy, “Energy and Longitudinal Bunch Measurements at the SPIRAL2 RFQ Exit”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 723-727. doi:10.18429/JACoW-IBIC2016-WEPG42
[n] C. Y. Liu, Y.-C. Chien, K.-B. Liu, B. S. Wang, and Y. S. Wong, “Dipole Power Supply for the Storage Ring of Taiwan Photon Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3573-3575. doi:10.18429/JACoW-IPAC2016-THPMW016
[n] C. Baumgarten, “Beam Based Calibration Measurements at the PSI Cyclotron Facility”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 342-344. doi:10.18429/JACoW-Cyclotrons2016-THP16
[n] B. S. Wang, Y.-C. Chien, C.-Y. Liu, K.-B. Liu, and H. P. Tsai, “The Multi-channel Measuring Data Acquisition Interface for TPS Quadrupole and Sextupole Magnet Power Supplies by using LabVIEW as the Developing Tool”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA046, pp. 774-776.
[n] J. Ma et al., “Reducing background/noise in stretched wire alignment technique measurements”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3345-3347. doi:10.18429/JACoW-IPAC2024-THPG38
[n] W. LC. Le Coz et al., “Progress on the Beam Energy Monitor for the SPIRAL2 Accelerator.”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF29, pp. 617-619.
[n] A. Lumpkin and B. Yang, “Status of the Synchrotron Radiation Monitors for the APS Facility Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ09, pp. 2470-2472.
[n] S. H. Kim et al., “Development of L-band Electron Accelerator for Irradiation Source”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA127, pp. 821-823.
[n] R. L. Gluckstern, “Feasibility Study of a Meson Linear Accelerator”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-07, pp. 124-127.
[n] T. Eriksson et al., “Upgrades and Consolidation of the CERN AD for Operation during the Next Decades”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA063, pp. 2654-2656.
[n] J. Rodnizki, B. Bazak, D. Berkovits, G. Feinberg, A. Shor, and Y. Yanay, “Lattice Beam Dynamics Study at Low for SARAF/EURISOL Driver 40/60 MeV 4 mA d& Superconducting Linac”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGB15, pp. 246-253.
[n] M. Peiniger, G. Mueller, H. Piel, and P. Thuens, “Nb3Sn for Superconducting Accelerators at 4.2 K”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1295-1298.
[n] R. Huhmann, G. Froehlich, S. J??licher, and V. RW. Schaa, “GSI Operation Software: Migration from OpenVMS to Linux”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS014, pp. 351-353.
[n] J. A. Mitchell et al., “LHC Crab Cavity Coupler Test Boxes”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2248-2250. doi:10.18429/JACoW-IPAC2016-WEPMB058
[n] T. Gingold, G. Daniluk, M. Rizzi, J. Serrano, and T. W, “HydRA: A System-on-Chip to Run Software in Radiation-Exposed Areas”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 217-221. doi:10.18429/JACoW-ICALEPCS2023-MO4AO02
[n] P. Stabile et al., “RF Gun Water Temperature Control System at ASTA”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM13, pp. 661-663.
[n] V. A. Verzilov et al., “Beam Diagnostics Development for Triumf E-Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB081, pp. 660-662.
[n] S. Sampayan et al., “Experimental Investigation of Beam Optics Issues at the Bremsstrahlung Converters for Radiographic Applications”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4103, pp. 314-316.
[n] F. Roncarolo et al., “Beam Instrumentation for the CERN LINAC4 and PSB Half Sector Test”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 408-411. doi:10.18429/JACoW-IPAC2017-MOPAB120
[n] J. T. Paul, R. G. Hennig, I. V. Bazarov, A. Galdi, S. S. Karkare, and H. A. Padmore, “Computational Screening for Low Emittance Photocathodes”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4755-4758. doi:10.18429/JACoW-IPAC2018-THPML053
[n] V. Popov et al., “Electron Beam Diagnostics for Compact 1.2 GeV Booster Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS042, pp. 4051-4053.
[n] A. Scheinker et al., “Preliminary Study of Advanced LLRF Controls at LANSCE for Beam Loading Compensation in the MaRIE X-FEL”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 411-413. doi:10.18429/JACoW-NAPAC2016-TUPOA63
[n] J. Hicks and Wm. Manwaring, “The Radiation Area Interlock System at IUCF”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper FP-11, pp. 621-623.
[n] M. Vretenar et al., “Linear Accelerator Designs for the Upgrade of the CERN Proton Injector Complex (Linac4, SPL)”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THXMA02, pp. 529-533.
[n] Y. Chen, S. Fu, Z. Huang, and Z. Zhang, “Space Charge Effect of Bunched Beam with Nonuniform Distribution in Both Longitudinal and Transverse Directions”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-58, pp. 499-501.
[n] G. Sikler et al., “Fabrication of a Prototype of a Fast Cycling Superferric Dipole-Magnet”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP043, pp. 232-234.
[n] B. Dwersteg et al., “Superconducting Cavities for HERA”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87A05, pp. XX-XX.
[n] J. H. Han et al., “Conditioning and High Power Test of the RF Guns at PITZ”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF026, pp. 357-359.
[n] J. Haimson, “Injector and Waveguide Design Parameters for a High-Energy Electron-Positron Linear Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 499-508.
[n] J. Kirchgessner et al., “Higher Order Mode RF Power Extraction from Polarized Cavities with a Single Output Coupler”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 479-482.
[n] S. Huang, J. Li, and Y. K. Wu, “A Direct Electron Beam Energy Spread Measurement System for Beam Instability and FEL Research”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS041, pp. 4045-4047.
[n] M. P. Cox et al., “Vacuum System for the Diamond Light Source DDBA Upgrade”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3587-3589. doi:10.18429/JACoW-IPAC2017-WEPVA136
[n] Z. D. Farkas, H. A. Hogg, G. A. Loew, and P. B. Wilson, “Recent Progress on Sled, The SLAC Energy Doubler”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1299-1303.
[n] M. Yoshioka, H. Matsumoto, Shigeru. Takeda, Y. Takeuchi, M. Tawada, and Y. Ishikawa, “Development of a Temperature Control System for Large Scale Electron-Positron Colliders”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D070, pp. 260-262.
[n] H. L. Rutkowski, “An Induction Linac for the Second Phase of DARHT”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO2001, pp. 21-25.
[n] D. Sanders, S. Sampayan, R. Neurath, and M. Krogh, “Evaluation of Target Options for Advanced Radiography Facilities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP161, pp. 2611-2613.
[n] C.-Y. Liu, D.-G. Huang, K.-B. Liu, and B. S. Wang, “The Cable Engineering Project for the TPS Power Supply”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA048, pp. 780-782.
[n] L. Shen, Y. L. Chi, and C. Huang, “The Pulsed Power Supply using IGBT Topology for CSNS Injection System Bump Magnet”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN044, pp. 2140-2142.
[n] C. M. Ankenbrandt, M. A. C. Cummings, R. P. Johnson, D. V. Neuffer, K. Yonehara, and C. Y. Yoshikawa, “Quasi-Isochronous Muon Capture”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP094, pp. 2724-2726.
[n] P. Pawlik, M. K. Grecki, and S. Simrock, “Single Bunch Transient Detection for the Beam Phase Measurement in Superconducting Accelerators”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM031, pp. XX-XX.
[n] Y. Chen, “Space Charge Effect of Bunched Beam with Different Density Distributions in Linac”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 765-768.
[n] S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 280-284. doi:10.18429/JACoW-ICALEPCS2017-TUDPL01
[n] F. Yang, D. La Civita, H. Sinn, and M. Vannoni, “Heat Load Simulation of Optic Materials at European XFEL”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 357. doi:10.18429/JACoW-MEDSI2020-THOB02
[n] V. Bharadwaj, R. Pitthan, J. Sheppard, H. Vincke, and J. W. Wang, “Heat Deposition in Positron Sources for ILC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP039, pp. 2574-2576.
[n] M. A. C. Cummings, C. M. Ankenbrandt, R. P. Johnson, and K. Yonehara, “Stopping Muon Beams”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN096, pp. 2933-2935.
[n] R. Scholl, R. Coombes, J. Hall, D. Neet, and D. Olsen, “Instrumentation and Electronics for the SLAC Beam Switchyard”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1061-1066.
[n] J. T. Seeman, F. J. Decker, I. Hsu, and C. Young, “Characterization and Monitoring of Transverse Beam Tails”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1734-1737.
[n] T. M. Huang et al., “High Power Input Couplers for C-ADS”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB101, pp. 1383-1386.
[n] T. Konomi et al., “Horizontal Test Results of 1.3 GHz Superconducting RF Gun #2 at KEK”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 540-544. doi:10.18429/JACoW-SRF2023-TUPTB049
[n] D. Kr?ñmer, “The BESSY Soft X-ray FEL User Facility”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF008, pp. 312-314.
[n] J. Haimson, “High Current Traveling Wave Electron Linear Accelerators”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 996-1012.
[n] G. Shu, Y. Chen, S. Lal, H. J. Qian, H. Shaker, and F. Stephan, “FIRST DESIGN STUDIES OF A NC CW RF GUN FOR EUROPEAN XFEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1698-1701. doi:10.18429/JACoW-IPAC2019-TUPRB010
[n] E. Matias, “Friday Closeout Presentation”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper FRTA01, pp. 219-219.
[n] A. Marchionni, “Beam intensity upgrade at Fermilab”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper MOCP01, pp. 34-38.
[n] L. Celona et al., “Preliminary Commissioning Results of the Proton Source for ESS at INFN-LNS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2628-2631. doi:10.18429/JACoW-IPAC2016-WEPMY035
[n] Y. K. Chen, H. T. Jing, C. Meng, Y. P. Song, J. Y. Tang, and G. Zhao, “Proton Beam Steering for the Experimental Muon Source at CSNS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 193-195. doi:10.18429/JACoW-IPAC2019-MOPGW046
[n] S. Littleton, D. Dowell, F. Zhou, and A. Fisher, “Dark current in the LCLS Injector: characterization and mitigation strategies”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2148-2150. doi:10.18429/JACoW-IPAC2024-WEPC75
[n] I. Krouptchenkov, A. Brenger, G. Kube, F. Schmidt-F?Âhre, and K. Wittenburg, “Experience with the Commissioning of the Libera Brilliance BPM Electronics at PETRA III”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD03, pp. 291-293.
[n] Y. Jongen and G. Ryckewaert, “The Louvain-la-Neuve Injector Cyclotron Project”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-09, pp. 618-621.
[n] A. Bogomyagkov, S. A. Nikitin, I. B. Nikolaev, A. G. Shamov, A. N. Skrinsky, and G. M. Tumaikin, “Central Mass Energy Determination in High Precision Experiments on VEPP-4M”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOOBKI01, pp. 63-65.
[n] D. Rees et al., “LANSCE RF System Refurbishment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS029, pp. 2400-2402.
[n] M. S. de Jong et al., “Ferrite-Loaded Higher-Order-Mode Absorbers for the MIT-Bates South Hall Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2016-2019.
[n] J. C. Brown and B. G. Chidley, “A High Power RF Supply for the Chalk River 100% Duty Factor Alvarez Linac”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper E10, pp. 296-299.
[n] G. Cavallari et al., “Status Report on Superconducting Nb Cavities for LEP”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89A02, pp. XX-XX.
[n] S. L. Leloir, T. A. Andre, B. Ducoudret, C. Jamet, G. Ledu, and C. Potier de courcy, “Measurement and Control of the Beam Intensity for the SPIRAL2 Accelerator”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF33, pp. 900-902.
[n] K. Nakayama and Y. Gomei, “Low Energy Injection Scheme of Compact Electron Storage Rings”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 573-576.
[n] J. Li, X. B. Chen, E. Matias, and W. Zhang, “Mechanical Vibration Measurement System at the Canadian Light Source”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL006, pp. 133-135.
[n] N. A. Vinokurov, V. N. Litvinenko, and J. M. J. Madey, “UV-VUV FEL Program at Duke Storage Ring with OK-4 Optical Klystron”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1442-1445.
[n] I. Gonin, H. Kaiser, D. Proch, and W. Singer, “Finite Element Simulation of the TESLA Cavity Hydroforming Process”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F07, pp. 565-569.
[n] J. M. J. Madey, “The Duke Free Electron Laser Light Source Facility”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6C004, pp. 24-28.
[n] S. Simon, C. Benjamin, R. Valizadeh, and J. Bradley, “Comparison on the superconducting properties of Nb and NbTiN thin films produced by both HiPIMS and bipolar HiPIMS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2802-2805. doi:10.18429/JACoW-IPAC2024-WEPS48
[n] J. Chen et al., “Virtual Instrumentation Interface for SRRC Control System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR10, pp. 2256-2258.
[n] S. Fetzko, U. Cummings, and E. Hoyt, “PEP-II Vacuum System - Joining SS Flanges to Copper Beam Chambers”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2497-2500.
[n] J. Y. Zhai et al., “Dumbbell Fabrication and Tuning of the IHEP Large Grain 9-Cell Cavity”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO067, pp. 769-771.
[n] E. Hoyer et al., “The Beam Line X Nd Fe-Steel Hybrid Wiggler for SSRL”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1508-1511.
[n] J. T. Seeman and J. C. Sheppard, “Special SLC Linac Developments”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE1-2, pp. 214-219.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Kwiatkowski, M. Alsdorf, B. Dehning, W. Vigano, and C. Zamantzas, “A Gigabit Ethernet Link for an FPGA Based Beam Loss Measurement System”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC44, pp. 178-181.
- F. Becheri et al., “A tango based control system for a 3D measurement bench for magnets”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_054.
- V. A. Verzilov et al., “Status of Beam Diagnostic Systems for TRIUMF Electron Linac”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC06, pp. 361-364.
- T. Slaton, G. Mazaheri, and T. Shintake, “Development of Nanometer Resolution C-Band Radio Frequency Beam Position Monitors in the Final Focus Test Beam”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4064, pp. 911-913.
- J. McCarrick et al., “Electron Beam/Converter Target Interactions in Radiographic Accelerators”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC009, pp. 563-567.
- T. S. Ueng, K. T. Hsu, C. S. Fang, Y. M. Chang, and K. K. Lin, “Turn-by-Turn Beam Position Measurement for 1.3 GeV Booster Synchrotron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ32, pp. 2524-2526.
- B. D. Hartsell, M. R. Campbell, P. Hurh, M. D. Fitton, T. Ishida, and T. Nakadaira, “Design of a Compact Fatigue Tester for Testing Irradiated Materials”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3321-3323.
- L. Bojtar, “Antiproton Decelerator Status Report”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper MOM1MCIO02, pp. XX-XX.
- Y. Chung et al., “Closed Orbit Feedback with Digital Signal Processing”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1592-1595.
- C. Jamet, W. LC. Le Coz, G. Ledu, S. Loret, and C. Potier de courcy, “Energy and Longitudinal Bunch Measurements at the SPIRAL2 RFQ Exit”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 723-727.
- C. Y. Liu, Y.-C. Chien, K.-B. Liu, B. S. Wang, and Y. S. Wong, “Dipole Power Supply for the Storage Ring of Taiwan Photon Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3573-3575.
- C. Baumgarten, “Beam Based Calibration Measurements at the PSI Cyclotron Facility”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 342-344.
- B. S. Wang, Y.-C. Chien, C.-Y. Liu, K.-B. Liu, and H. P. Tsai, “The Multi-channel Measuring Data Acquisition Interface for TPS Quadrupole and Sextupole Magnet Power Supplies by using LabVIEW as the Developing Tool”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA046, pp. 774-776.
- J. Ma et al., “Reducing background/noise in stretched wire alignment technique measurements”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG38, pp. 3345-3347.
- W. LC. Le Coz et al., “Progress on the Beam Energy Monitor for the SPIRAL2 Accelerator.”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF29, pp. 617-619.
- A. Lumpkin and B. Yang, “Status of the Synchrotron Radiation Monitors for the APS Facility Rings”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ09, pp. 2470-2472.
- S. H. Kim et al., “Development of L-band Electron Accelerator for Irradiation Source”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA127, pp. 821-823.
- R. L. Gluckstern, “Feasibility Study of a Meson Linear Accelerator”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper B-07, pp. 124-127.
- T. Eriksson et al., “Upgrades and Consolidation of the CERN AD for Operation during the Next Decades”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA063, pp. 2654-2656.
- J. Rodnizki, B. Bazak, D. Berkovits, G. Feinberg, A. Shor, and Y. Yanay, “Lattice Beam Dynamics Study at Low for SARAF/EURISOL Driver 40/60 MeV 4 mA d& Superconducting Linac”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGB15, pp. 246-253.
- M. Peiniger, G. Mueller, H. Piel, and P. Thuens, “Nb3Sn for Superconducting Accelerators at 4.2 K”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1295-1298.
- R. Huhmann, G. Froehlich, S. J??licher, and V. RW. Schaa, “GSI Operation Software: Migration from OpenVMS to Linux”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS014, pp. 351-353.
- J. A. Mitchell et al., “LHC Crab Cavity Coupler Test Boxes”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2248-2250.
- T. Gingold, G. Daniluk, M. Rizzi, J. Serrano, and T. W, “HydRA: A System-on-Chip to Run Software in Radiation-Exposed Areas”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO4AO02, pp. 217-221.
- P. Stabile et al., “RF Gun Water Temperature Control System at ASTA”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM13, pp. 661-663.
- V. A. Verzilov et al., “Beam Diagnostics Development for Triumf E-Linac”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB081, pp. 660-662.
- S. Sampayan et al., “Experimental Investigation of Beam Optics Issues at the Bremsstrahlung Converters for Radiographic Applications”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4103, pp. 314-316.
- F. Roncarolo et al., “Beam Instrumentation for the CERN LINAC4 and PSB Half Sector Test”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 408-411.
- J. T. Paul, R. G. Hennig, I. V. Bazarov, A. Galdi, S. S. Karkare, and H. A. Padmore, “Computational Screening for Low Emittance Photocathodes”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4755-4758.
- V. Popov et al., “Electron Beam Diagnostics for Compact 1.2 GeV Booster Synchrotron”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS042, pp. 4051-4053.
- A. Scheinker et al., “Preliminary Study of Advanced LLRF Controls at LANSCE for Beam Loading Compensation in the MaRIE X-FEL”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 411-413.
- J. Hicks and Wm. Manwaring, “The Radiation Area Interlock System at IUCF”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper FP-11, pp. 621-623.
- M. Vretenar et al., “Linear Accelerator Designs for the Upgrade of the CERN Proton Injector Complex (Linac4, SPL)”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THXMA02, pp. 529-533.
- Y. Chen, S. Fu, Z. Huang, and Z. Zhang, “Space Charge Effect of Bunched Beam with Nonuniform Distribution in Both Longitudinal and Transverse Directions”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-58, pp. 499-501.
- G. Sikler et al., “Fabrication of a Prototype of a Fast Cycling Superferric Dipole-Magnet”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP043, pp. 232-234.
- B. Dwersteg et al., “Superconducting Cavities for HERA”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87A05, pp. XX-XX.
- J. H. Han et al., “Conditioning and High Power Test of the RF Guns at PITZ”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF026, pp. 357-359.
- J. Haimson, “Injector and Waveguide Design Parameters for a High-Energy Electron-Positron Linear Accelerator”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 499-508.
- J. Kirchgessner et al., “Higher Order Mode RF Power Extraction from Polarized Cavities with a Single Output Coupler”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 479-482.
- S. Huang, J. Li, and Y. K. Wu, “A Direct Electron Beam Energy Spread Measurement System for Beam Instability and FEL Research”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS041, pp. 4045-4047.
- M. P. Cox et al., “Vacuum System for the Diamond Light Source DDBA Upgrade”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3587-3589.
- Z. D. Farkas, H. A. Hogg, G. A. Loew, and P. B. Wilson, “Recent Progress on Sled, The SLAC Energy Doubler”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1299-1303.
- M. Yoshioka, H. Matsumoto, Shigeru. Takeda, Y. Takeuchi, M. Tawada, and Y. Ishikawa, “Development of a Temperature Control System for Large Scale Electron-Positron Colliders”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D070, pp. 260-262.
- H. L. Rutkowski, “An Induction Linac for the Second Phase of DARHT”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO2001, pp. 21-25.
- D. Sanders, S. Sampayan, R. Neurath, and M. Krogh, “Evaluation of Target Options for Advanced Radiography Facilities”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP161, pp. 2611-2613.
- C.-Y. Liu, D.-G. Huang, K.-B. Liu, and B. S. Wang, “The Cable Engineering Project for the TPS Power Supply”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA048, pp. 780-782.
- L. Shen, Y. L. Chi, and C. Huang, “The Pulsed Power Supply using IGBT Topology for CSNS Injection System Bump Magnet”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN044, pp. 2140-2142.
- C. M. Ankenbrandt, M. A. C. Cummings, R. P. Johnson, D. V. Neuffer, K. Yonehara, and C. Y. Yoshikawa, “Quasi-Isochronous Muon Capture”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP094, pp. 2724-2726.
- P. Pawlik, M. K. Grecki, and S. Simrock, “Single Bunch Transient Detection for the Beam Phase Measurement in Superconducting Accelerators”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POM031, pp. XX-XX.
- Y. Chen, “Space Charge Effect of Bunched Beam with Different Density Distributions in Linac”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 765-768.
- S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 280-284.
- F. Yang, D. La Civita, H. Sinn, and M. Vannoni, “Heat Load Simulation of Optic Materials at European XFEL”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 357.
- V. Bharadwaj, R. Pitthan, J. Sheppard, H. Vincke, and J. W. Wang, “Heat Deposition in Positron Sources for ILC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP039, pp. 2574-2576.
- M. A. C. Cummings, C. M. Ankenbrandt, R. P. Johnson, and K. Yonehara, “Stopping Muon Beams”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN096, pp. 2933-2935.
- R. Scholl, R. Coombes, J. Hall, D. Neet, and D. Olsen, “Instrumentation and Electronics for the SLAC Beam Switchyard”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1061-1066.
- J. T. Seeman, F. J. Decker, I. Hsu, and C. Young, “Characterization and Monitoring of Transverse Beam Tails”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1734-1737.
- T. M. Huang et al., “High Power Input Couplers for C-ADS”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB101, pp. 1383-1386.
- T. Konomi et al., “Horizontal Test Results of 1.3 GHz Superconducting RF Gun #2 at KEK”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB049, pp. 540-544.
- D. Kr?ñmer, “The BESSY Soft X-ray FEL User Facility”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF008, pp. 312-314.
- J. Haimson, “High Current Traveling Wave Electron Linear Accelerators”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 996-1012.
- G. Shu, Y. Chen, S. Lal, H. J. Qian, H. Shaker, and F. Stephan, “FIRST DESIGN STUDIES OF A NC CW RF GUN FOR EUROPEAN XFEL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1698-1701.
- E. Matias, “Friday Closeout Presentation”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper FRTA01, pp. 219-219.
- A. Marchionni, “Beam intensity upgrade at Fermilab”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper MOCP01, pp. 34-38.
- L. Celona et al., “Preliminary Commissioning Results of the Proton Source for ESS at INFN-LNS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2628-2631.
- Y. K. Chen, H. T. Jing, C. Meng, Y. P. Song, J. Y. Tang, and G. Zhao, “Proton Beam Steering for the Experimental Muon Source at CSNS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 193-195.
- S. Littleton, D. Dowell, F. Zhou, and A. Fisher, “Dark current in the LCLS Injector: characterization and mitigation strategies”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC75, pp. 2148-2150.
- I. Krouptchenkov, A. Brenger, G. Kube, F. Schmidt-F?Âhre, and K. Wittenburg, “Experience with the Commissioning of the Libera Brilliance BPM Electronics at PETRA III”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD03, pp. 291-293.
- Y. Jongen and G. Ryckewaert, “The Louvain-la-Neuve Injector Cyclotron Project”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-09, pp. 618-621.
- A. Bogomyagkov, S. A. Nikitin, I. B. Nikolaev, A. G. Shamov, A. N. Skrinsky, and G. M. Tumaikin, “Central Mass Energy Determination in High Precision Experiments on VEPP-4M”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOOBKI01, pp. 63-65.
- D. Rees et al., “LANSCE RF System Refurbishment”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS029, pp. 2400-2402.
- M. S. de Jong et al., “Ferrite-Loaded Higher-Order-Mode Absorbers for the MIT-Bates South Hall Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2016-2019.
- J. C. Brown and B. G. Chidley, “A High Power RF Supply for the Chalk River 100% Duty Factor Alvarez Linac”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper E10, pp. 296-299.
- G. Cavallari et al., “Status Report on Superconducting Nb Cavities for LEP”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89A02, pp. XX-XX.
- S. L. Leloir, T. A. Andre, B. Ducoudret, C. Jamet, G. Ledu, and C. Potier de courcy, “Measurement and Control of the Beam Intensity for the SPIRAL2 Accelerator”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF33, pp. 900-902.
- K. Nakayama and Y. Gomei, “Low Energy Injection Scheme of Compact Electron Storage Rings”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 573-576.
- J. Li, X. B. Chen, E. Matias, and W. Zhang, “Mechanical Vibration Measurement System at the Canadian Light Source”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL006, pp. 133-135.
- N. A. Vinokurov, V. N. Litvinenko, and J. M. J. Madey, “UV-VUV FEL Program at Duke Storage Ring with OK-4 Optical Klystron”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1442-1445.
- I. Gonin, H. Kaiser, D. Proch, and W. Singer, “Finite Element Simulation of the TESLA Cavity Hydroforming Process”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F07, pp. 565-569.
- J. M. J. Madey, “The Duke Free Electron Laser Light Source Facility”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6C004, pp. 24-28.
- S. Simon, C. Benjamin, R. Valizadeh, and J. Bradley, “Comparison on the superconducting properties of Nb and NbTiN thin films produced by both HiPIMS and bipolar HiPIMS”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS48, pp. 2802-2805.
- J. Chen et al., “Virtual Instrumentation Interface for SRRC Control System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR10, pp. 2256-2258.
- S. Fetzko, U. Cummings, and E. Hoyt, “PEP-II Vacuum System - Joining SS Flanges to Copper Beam Chambers”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2497-2500.
- J. Y. Zhai et al., “Dumbbell Fabrication and Tuning of the IHEP Large Grain 9-Cell Cavity”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO067, pp. 769-771.
- E. Hoyer et al., “The Beam Line X Nd Fe-Steel Hybrid Wiggler for SSRL”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1508-1511.
- J. T. Seeman and J. C. Sheppard, “Special SLC Linac Developments”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE1-2, pp. 214-219.
Back to search