JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	C. H. Kuo, J. Chen, P. C. Chiu, K. T. Hsu, and K. H. Hu, “Orbit Feedback in Taiwan Light Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP064, pp. 785-787. 
[n]	A. Mosnier et al., “Superconducting RF Development at Saclay for a 2-4 Ge V Electron Facility”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 863-865. 
[n]	W. T. Roybal, D. E. Rees, H. L. Borchert, M. McCarthy, and L. Toole, “LEDA RF Distribution System Design and Component Test Results”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4076, pp. 947-949. 
[n]	K. J. Ruisard, G. A. Hine, T. W. Koeth, and A. J. Rosenberg, “The Rutgers Cyclotron: Placing Student's Careers on Target”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WE1PB02, pp. 291-295. 
[n]	S. Dastan, S. Livinov, J. Rahighi, R. Saffari, and M. Steck, “The ESR Closed Orbit  Calculation and Simulation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3349-3351. doi:10.18429/JACoW-IPAC2019-WEPTS100
[n]	M. G. Abbott and T. M. Cobb, “An EPICS IOC Builder”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU032, pp. 506-509. 
[n]	P. Datte et al., “Electrical Design Considerations for a 40MHz Gas Ionization Chamber”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH046, pp. 1327-1329. 
[n]	R. Thornton, G. Dale, J. Lewellen, and K. Bishofberger, “A test stand for LAMP, the LANSCE accelerator modernization project”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper MOZD03, unpublished. 
[n]	J. Graber et al., “High Peak Power RF Processing Studies of 3 GHz Niobium Cavities”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F19, pp. XX-XX. 
[n]	K. Ozeki, Y. Higurashi, T. Nakagawa, and J. Ohnishi, “Design of new 18 GHz ECR for RIKEN RIBF”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper WEZO02, pp. 114-116. 
[n]	H. Jeevakhan, P. K. Purohit, and G. Mishra, “Influence of Horizantal Constant Magnetic Field on Harmonic Undulator Radiations and Gain”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 34-37. doi:10.18429/JACoW-FEL2015-MOP004
[n]	M. J. Furseman et al., “Adopting and Adapting Control System Studio at Diamond Light Source”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1032-1035. doi:10.18429/JACoW-ICALEPCS2015-WEPGF137
[n]	J. Friedl, “DELTA, The Dortmund Electron Test Storage Ring Accelerator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 463-466. 
[n]	T. Kasuga, M. Hasumoto, T. Kinoshita, and H. Yonehara, “Vacuum System for UVSOR Storage Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1672-1675. 
[n]	F. Koechlin, “Electrostatic Septum in a High Intensity Electron Accelerator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1890-1893. 
[n]	Y. G. Song, J. H. Kim, Y.-S. Cho, and H.-J. Kwon, “Development of Web-based User Interface for Beam Status Monitoring of 100-MeV Proton Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2389-2391. doi:10.18429/JACoW-IPAC2016-WEPMR050
[n]	C. Gardner, Y. Y. Lee, N. Tsoupas, and J. Wei, “FODO/Doublet Lattice for the SNS Accumulator Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B12, pp. 978-980. 
[n]	Z. Li, K. L. Bane, R. H. Miller, T. O. Raubenheimer, R. D. Ruth, and J. Wang, “Traveling Wave Structure Optimization for the NLC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH061, pp. 3816-3818. 
[n]	F. Furuta et al., “Performance of the Novel Cornell ERL Main Linac Prototype Cryomodule”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 492-495. doi:10.18429/JACoW-LINAC2016-TUPLR011
[n]	S. Schaffner and T. Larrieu, “A Relational Database Model for Managing Accelerator Control System Software At Jefferson Lab”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP074, pp. XX-XX. 
[n]	E. Schulz et al., “Engineering Solutions for the Electro-polishing of Multi-cell Superconducting Accelerator Structures”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT010, pp. XX-XX. 
[n]	C. Widmann et al., “Beam Transport System from a Laser Wakefield Accelerator to a Transverse Gradient Undulator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2803-2806. doi:10.18429/JACoW-IPAC2014-THOBA03
[n]	M. J. Barnes, L. Ducimeti?¿re, and J. A. Uythoven, “CLIC Pre-Damping and Damping Ring Kickers: Initial Ideas to Achieve Stability Requirements”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD089, pp. 3305-3307. 
[n]	S. Ninomiya, T. Saito, H. Tamura, and K. Sato, “RCNP Techniques for Producing Ultra-Precise Beams”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper F-3, pp. XX-XX. 
[n]	A. Bixio, L. Ghirlanda, and F. Terzi, “Design, Manufacture and Testing of DAPhiNE Transfer Lines Magnets at Ansaldo GIE. Part I - Linac Beam Diagnostic Branch”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2229-2232. 
[n]	Y. Senichev, “Theory and Applications of Lattice with Negative Momentum Compaction Factor”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU2PBC03, pp. 677-679. 
[n]	Y. R. Roblin and T. Larrieu, “Online Model Server for the Jefferson Lab Accelerator”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP012, pp. XX-XX. 
[n]	A. Antillon and M. Month, “Theory of Non-Planar Orbits”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2221-2225. 
[n]	O. Kamigaito, “Development of a Folded-Coaxial RFQ Linac for the RILAC”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP79, pp. 863-865. 
[n]	G. Penco, S. M. Lidia, and M. Trovo, “Ramping Longitudinal Distribution Studies for the FERMI@ELETTRA Injector”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH027, pp. 621-624. 
[n]	R. Kuroda et al., “Present Status of Photo-Cathode RF Gun System and Its Applications”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FOAB010, pp. 710-712. 
[n]	Kotaro Satoh, Masaki Tejima, “Calibration for KEKB Beam Position Monitors”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P076, pp. 2087-2089. 
[n]	P. C. Chiu et al., “Application of BPM Data to Locate Noise Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE066, pp. 1131-1133. 
[n]	M. S. Mohan, “A General Device Driver Simulator to Help Compare Real Time Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS030, pp. 863-866. 
[n]	A. V. Aleksandrov et al., “High-Dynamic-Range Current Measurements in the Medium-Energy Beta Transport Line at the Spallation Neutron Source”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP002, pp. 244-246. 
[n]	I. Mohos, J. Bojowald, J. Dietrich, and F. Klehr Forschungszentrum J??lich GmbH, “New Schottky-Pickup for COSY-J??lich”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS07, pp. XX-XX. 
[n]	B. Aune et al., “ALS II :  The Saclay Proposal for a 2-GeV, cw Electron Facility”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3296-3299. 
[n]	Y. Li, “Laser Pulse Shaping”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper WG111, pp. 40-44. 
[n]	W. Kuhlmann, J. Bojowald, C. Mayer-B?Âricke, and J. Reich, “Emittance Measurements at the J??lich Isochronous Cyclotron (JULIC)”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69D09, pp. XX-XX. 
[n]	J. Stadlmann, D. Batorowicz, C. Fuhr, J. Hanson, S. Leis, and M. Seidel, “Analysis of Electrical Energy Consumption of Accelerator Reserach Facilities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2370-2372. doi:10.18429/JACoW-IPAC2016-WEPMR043
[n]	J. S. Kolski, R. J. Macek, and T. Spickermann, “Coherent Space Charge Tune Shift Measurements in the Los Alamos Proton Storage Ring”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPAC20, pp. 493-495. 
[n]	P. Emma, R. Akre, L. Bentson, and P. Krejcik, “Bunch Length Measurements Using a Transverse RF Deflecting Structure in the SLAC Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI097, pp. 1882-1884. 
[n]	K. H. Hu et al., “Correlation Study between Beam Behaviour Observed by Electron BPMs and Photon Monitors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP006, pp. 3959-3961. 
[n]	D. F. Sutter and B. L. Beaudoin, “Measurement of Plasma Wave Speed from Electron Beam End Erosion”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPAC33, pp. 520-522. 
[n]	K. T. McDonald et al., “Target System Concept for a Muon Collider/Neutrino Factory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1568-1570. doi:10.18429/JACoW-IPAC2014-TUPRI008
[n]	V. K. Decyk, S. A. Friedman, and T. V. Singh, “Graphical Processing Unit-Based Particle-In-Cell Simulations”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper WE2IOPK03, pp. 96-100. 
[n]	R. Cooper, K. Chan, L. Thode, and T. Wang, “Transverse Effects of a Waveguide Coupling Slot”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-05, pp. 315-317. 
[n]	J. E. Theroux et al., “A ÔÇÿShort PortÔÇÖ Beamline For Mounting Custom Targets To A Ge PettraceÔäó Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 361-366. 
[n]	B. Feng, V. K. Decyk, C. Huang, T. C. Katsouleas, W. B. Mori, and P. Muggli, “Long Time Electron Cloud Instability Simulation Using QuickPIC With Pipelining Algorithm”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS055, pp. 3615-3617. 
[n]	C. Y. Liao et al., “TPS Screen Monitor User Control Interface”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO032, pp. 225-227. 
[n]	H. C. Chen et al., “Transient Orbit of Injection in Taiwan Light Source Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4012-4015. doi:10.18429/JACoW-IPAC2016-THPOW033
[n]	I. Ben-Zvi et al., “Photoinjected Energy Recovering Linac Upgrade for the National Synchrotron Light Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOAB005, pp. 350-352. 
[n]	K. Saito, “SCRF Test Facilities toward the ILC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOXPA02, pp. 5-9. 
[n]	S. K. Esin, A. V. Feschenko, and P. N. Ostroumov, “INR Activity in Development and Production of Bunch Shape Monitors”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAE08, pp. 2408-2410. 
[n]	D. Rubin, “Linear Collider Applications of Superconducting RF”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89F01, pp. XX-XX. 
[n]	A. V. Aleksandrov et al., “Feasibility Study of Using an Electron Beam for Profile Measurements in the SNS Accumulator Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT039, pp. 2586-2588. 
[n]	M. Trovo, S. M. Lidia, and G. Penco, “Further Studies in the FERMI@ELETTRA Photoninjector Optimization”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH028, pp. 625-628. 
[n]	G. Penco, S. M. Lidia, and M. Trovo, “Optimization Studies of the FERMI@ELETTRA Photoinjector”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS104, pp. 3520-3522. 
[n]	W. T. Chu, “Instrumentation in Medical Systems”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAE04, pp. 2394-2398. 
[n]	B. Cauvin, M. Desmons, J. Girard, and P. Letonturier, “Long Term Performance on the Superconducting Cavities of the Saclay Heavy Ion Linac”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I44, pp. XX-XX. 
[n]	J. Sekutowicz et al., “Superstructures: First Cold Test and Future Applications”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUO05, pp. 234-238. 
[n]	S. M. Lidia, “Design of Injector Systems for LUX”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF070, pp. 476-478. 
[n]	C. Y. Wu et al., “Control of the Pulse Magnet Power Supply by EPICS IOC Embedded PLC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB020, pp. 2731-2733. 
[n]	Y. Iwashita and A. Morita, “Superposition of Multiple Higher Order Modes in a Cavity”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP5A02, pp. 818-820. 
[n]	T. C. Tseng et al., “The SRI Beam Size Monitor Developed at NSRRC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT059, pp. 3465-3467. 
[n]	N. Savard et al., “Development of a Penning Ion Source Test Stand for Production of Alpha Particles”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1932-1935. doi:10.18429/JACoW-IPAC2019-TUPTS004
[n]	D. E. Johnson, “Linear Beam-Beam Tune Shift Estimates for the Tevatron Collider”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 857-860. 
[n]	W. T. Chu, J. R. Alonso, and C. A. Tobias, “Heavy Ion Beam Studies and Imaging with a Multiplane Multiwire Proportional Chamber”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2198-2201. 
[n]	A. M. George et al., “Optimisation of D- Ion Production in a Multicusp Ion Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1609-1611. doi:10.18429/JACoW-IPAC2018-TUPML030

For LaTeX

Use Complete Form

For BibTeX

References

Back to search