JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	V. H. Ranjbar et al., “Progress on RCS eRHIC Injector Design”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 115-117. doi:10.18429/JACoW-IPAC2018-MOPMF016
[n]	O. H. Rahman, J. Skaritka, and E. Wang, “Novel Design of a HVDC Magnetized Electron Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4034-4036. doi:10.18429/JACoW-IPAC2021-THPAB141
[n]	M. Neubauer, T. Blassick, R. Johnson, G. Kazakevich, M. Popovic, and J. Wessel, “Magnetron-driven superconducting linacs for UNF transmutation”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB082, unpublished. 
[n]	Y. Zhang, H. Z. Ma, and J. Yue, “Some Preliminary Experiments using LIBERA BPMs in BEPCII”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC107, pp. 1266-1268. 
[n]	R. Hettel et al., “The 10 Hz Resonant Magnet Power Supply for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 926-929. 
[n]	F. Z. Hsiao et al., “The Pilot-Runs of the Helium Cryogenic System for the TLS Superconducting Cavity”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE038, pp. 2402-2404. 
[n]	D. Boussard, L. Evans, J. Gareyte, T. Linnecar, W. Mills, and E. J. N. Wilson, “Acceleration and Storage of a Dense Single Bunch in the CERN SPS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3484-3487. 
[n]	G. Geloni et al., “Investigation of multi-modes in Hard X-ray Self-seeding operation at the European XFEL”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL019, unpublished. 
[n]	S. Yamamoto, “Development of the Very Short Period Undulators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1845-1847. doi:10.18429/JACoW-IPAC2014-WEOAA02
[n]	S. H. Chang et al., “The Effect of Improving the Temperature  Variation at the SSRC Storage  Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B19, pp. 2483-2485. 
[n]	G. Isoyama et al., “Solid-State Switch for a Klystron Modulator for Stable Operation of a THz- FEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP058, pp. 868-870. 
[n]	S. Bai, J. Gao, P. Bambade, and G. R. White, “Simulation on the Breaking of x Multiknob Orthogonality in the Presence of Gradient and Coupling Errors and Experimental Investigation”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO017, pp. 1919-1921. 
[n]	A. Macridin, J. F. Amundson, and E. G. Stern, “Numerical simulations of transverse modes in Gaussian bunches with space charge”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 575-578. doi:10.18429/JACoW-IPAC2015-MOPMA017
[n]	L. Chen et al., “The Development of the LLRF Control System for the New High Power Test Stand of Couplers”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 227-230. doi:10.18429/JACoW-SRF2017-MOPB072
[n]	R. Gerig, M. May, C. Moore, S. Ohnuma, S. Pruss, and F. Turkot, “Design, Installation, and Commissioning of the Dzero Overpass at the Fermilab Main Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1666-1669. 
[n]	C. G. Trahern and J. Zhou, “Lattice Parameters Database and Operational Simulation at FNAL and SSCL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 207-210. 
[n]	S. Molloy et al., “Measurement of the Beam's Trajectory Using the Higher Order Modes it Generates in a Superconducting Accelerating Cavity”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOAC03, pp. 2642-2644. 
[n]	T. Linnecar and W. Scandale, “A Transverse Schottky Noise Detector for Bunched Proton Beams”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2147-2150. 
[n]	D. Gurd, M. Hemmer, A. Jain, S. Sathe, J. Smith, and J. Wei, “Magnet & Survey Database for the SNS Accumulator Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3B16, pp. 1880-1882. 
[n]	J. H. Han, K. Fl?Âttmann, J. Rowland, and S. Schreiber, “Jitter and Tolerance Study of FEL Injectors”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC45, pp. 344-347. 
[n]	E. Wang et al., “The Progress of High Current High Bunch Charge Polarized Electron HVDC Gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2160-2162. doi:10.18429/JACoW-IPAC2019-TUPTS103
[n]	Y.-C. Chae and R. Soliday, “Development of SDDS-Compliant GENESIS and Its Application”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH104, pp. 2710-2712. 
[n]	W. X. Cheng, K. Ha, Y. Tian, and L.-H. Yu, “Precise Beam Orbit Response Measurement with AC Excitation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 380-382. doi:10.18429/JACoW-IPAC2016-MOPMR058
[n]	F. Rossi et al., “Study of the Thermo-Mechanical Behavior of the CLIC Two-Beam Modules”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI056, pp. 2818-2820. 
[n]	D. Gudkov, S. Lebet, G. Riddone, F. Rossi, and A. Samoshkin, “Experience on Fabrication and Assembly of the First Clic Two-Beam Module Prototype”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI055, pp. 2815-2817. 
[n]	T. Linnecar and W. Scandale, “Continuous Tune Measurements Using the Schottky Detector”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2185-2188. 
[n]	J. Aron et al., “Status Report on the ATLAS Superconducting Linear Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0017, pp. 132-134. 
[n]	E. G. Stern, R. Ainsworth, J. F. Amundson, and B. C. Brown, “Simulations of the Fermilab Recycler for Losses and Collimation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 582-585. doi:10.18429/JACoW-IPAC2015-MOPMA019
[n]	K. Fl?Âttmann, “Polarized and Unpolarized Positron Sources for Linear Colliders”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH2-03, pp. 681-685. 
[n]	J. Bisognano et al., “Progress Toward the Wisconsin Free Electron Laser”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP176, pp. 2444-2446. 
[n]	D. Boussard, G. Lambert, R. Lauckner, T. Linnecar, and W. Wingerter, “Real Time Fourier Analysis for the Observations of Fast ee- Instabilities in the CERN SPS”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1563-1566. 
[n]	R. Gerig, S. Pruss, and F. Turkot, “Simulations of the Fermilab Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1123-1126. 
[n]	M. M. Dehler et al., “Fabrication of the CERN/PSI/ST X-band Accelerating Structures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC012, pp. 86-88. 
[n]	K. W. Shepard, R. Benaroya, L. M. Bollinger, and C. H. Scheibelhut, “Split Ring Resonator for the Argonne Superconducting Heavy Ion Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1147-1150. 
[n]	J. Yue, J. S. Cao, L. Ma, Y. F. Sui, L. Wang, and X. Y. Zhao, “Longitudinal and Transverse Feedback Systems for the BEPCII Storage Rings”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC09, pp. 373-375. 
[n]	K. D. Jacobs and B. G. McAllister, “Turn-by-Turn Transverse Phase Space Measurements in Real Time”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH133, pp. 2395-2396. 
[n]	O. R. Blanco, P. Bambade, and R. Tomas, “CLIC 3 TeV Beam Size Optimization with Radiation Effects”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO003, pp. 1877-1879. 
[n]	K. Jacobs et al., “High Duty Factor Beams Extracted from the MIT-Bates South Hall Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W011, pp. 348-350. 
[n]	J. R. Chen, D. S. Lee, and Z. D. Tsai, “Cooling Air Flow Induced Thermal Deformation of the Magnet Lattice Girder”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B17, pp. 2435-2437. 
[n]	M. Doleans et al., “Status Report on the NSCL RF Fragment Separator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS039, pp. 3585-3587. 
[n]	J. Haimson, C. P. Sargent, and J. N. Weaver, “Highly Phase-Stable RF Power Circuits for the MIT-LNS Linac”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 595-598. 
[n]	R. Gerig, C. Moore, and S. Pruss, “Beam Quality Measurements in Fermilab Main Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2177-2180. 
[n]	G. I. Cancelo et al., “Analysis of DESY-FLASH LLRF Measurements for the ILC Heavy Beam Loading Test”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP077, pp. 2189-2191. 
[n]	A. H. Jaffey, R. Benaroya, and T. K. Khoe, “A Hybrid Superconducting Solenoid as a Focusing Element in a Superconducting Heavy-Ion Accelerator”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper B08, pp. 102-105. 
[n]	S. V. Benson, J. Gubeli, and M. Shinn, “Coherent Harmonics in the Super-Radiant Regime from an FEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH117, pp. 2745-2747. 
[n]	P. Adams, “Beamline Computer Control by Interpreter”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 361-363. 
[n]	L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3887-3889. doi:10.18429/JACoW-IPAC2014-THPRI052
[n]	G. I. Cancelo, E. James, and S. A. Wolbers, “Digital Signal Processing the Tevatron BPM Signals”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT011, pp. 1242-1244. 
[n]	J. Safranek, “Beam Dynamics in Wigglers:  Tracking in PEP with Damping Wigglers and Measurements at Spear”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1307-1310. 
[n]	M. Aiba and M. B?Âge, “Beam-based Alignment of an X-FEL Undulator Section Utilizing Corrector Pattern”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD27, pp. 293-296. 
[n]	D. McComick et al., “Long Ion Chamber Systems for the SLC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1531-1534. 
[n]	H. Witte and J. S. Berg, “Conceptual Design of a Quadrupole Magnet for eRHIC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2729-2731. doi:10.18429/JACoW-IPAC2015-WEPJE026
[n]	A. Drees, P. Cameron, R. Michnoff, C. Montag, and M. Wilinski, “RHIC Transverse Injection Damping”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG044, pp. 2691-2693. 
[n]	J. Lorkiewicz et al., “Activities at NCBJ Towards Development of the Future, Fully-Superconducting, XFEL-Type, RF Electron Gun”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 566. doi:10.18429/JACoW-SRF2021-WEPFDV006
[n]	W. Smith and E. Bjorklund, “A CAMAC-Based Knob Controller for the LAMPF Control System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 544-547. 
[n]	D. J. Wang, C. K. Kuan, H. C. Ho, S. Y. Perng, and J. R. Chen, “Mechanical Improvement in Beam Stability at NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOM201, pp. XX-XX. 
[n]	R. Bossart, J. Bosser, L. Burnod, A. Chapman-Hatchett, E. D, and P. Mills, “The SPS Beam Instrumentation and Closed Orbit Correction”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1733-1736. 
[n]	O. Chubenko and A. Afanasev, “Modeling of Photoemission and Electron Spin Polarization from NEA GaAs Photocathodes”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1556-1559. doi:10.18429/JACoW-IPAC2015-TUPWA059
[n]	R. Averill, K. Hatch, C. Sibley, and R. Gross, “Power Factor Correction at MIT-Bates Linear Accelerator Center with Pulsed Loads of up to 180 MW Peak (2.7 MW Average)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P058, pp. 3743-3745. 
[n]	H. Witte, I. Marneris, and V. H. Ranjbar, “Magnet Designs for the eRHIC Rapid Cycling Synchrotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2404-2406. doi:10.18429/JACoW-IPAC2018-WEPMF018
[n]	W. J. Ramler et al., “Progress in the Development of Superconducting Resonators for Heavy Ion Acceleration”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper G03, pp. 168-174. 
[n]	K. D. Jacobs et al., “Instability Calculations for the MIT-Bates South Hall Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1791-1794. 
[n]	C. Curtis, “Ion Source and Injector Development”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper D01, pp. 179-188. 
[n]	R. Connolly, P. Cameron, R. Michnoff, and S. Tepikian, “Performance of the RHIC IPM”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH033, pp. 1297-1299. 
[n]	J. C. Chang, J. R. Chen, and C. Y. Liu, “Air Temperature Control Improvement for the Storage Ring Tunnel”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG025, pp. 1482-1484. 
[n]	F. Krawczyk, J. Gioia, B. Haynes, R. Lujan, B. Rusnak, and B. Smith, “The Power Coupler Design for the APT Superconducting Accelerator”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C39, pp. 762-768. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search