Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. C. Yang, L. T. Sun, and Y. J. Yuan, “Status of the HIAF Accelerator Facility in China”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper MOAI01, pp. 1-5. doi:10.18429/JACoW-CYCLOTRONS2022-MOAI01
[n] M. A. Rehman et al., “The First Trial of XY-Coupled Beam Phase Space Matching for Three-Dimensional Spiral Injection”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 553-556. doi:10.18429/JACoW-IPAC2021-MOPAB162
[n] V. Zvyagintsev et al., “Update on SCRF Development at TRIUMF”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper THAOR06, pp. 152-154.
[n] F. Naito, “The JAERI/KEK Joint Project and Its Performance”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH102, pp. 564-568.
[n] K. Fukami et al., “Beam Collimation System for the SPring-8 Top-up Operation”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15009, pp. XX-XX.
[n] R. Xiang et al., “DC-SC Photoinjector with Low Emittance at Peking University”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE055, pp. 3325-3327.
[n] J. Sinsheimer et al., “Precision Insertion Device Control and Simultaneous Monochromator Fly Scanning for NSLS-II”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1245. doi:10.18429/JACoW-ICALEPCS2019-WEPHA063
[n] D. W. Storm et al., “Operation Status of the Nevis Synchrocyclotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1634-1637.
[n] H. A. Martirosyan, W. Bothe, V. P. Goncharenko, O. A. Gusev, V. Ts. Nikogosyan, and K. A. Sadoyan, “Magnetic Field Flat-Top of Yerevan Synchrotron”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1220-1222.
[n] D. S?ínchez-Herranz et al., “Status of the Engineering Design of the IFMIF-DONES High Energy Beam Transport Line and Beam Dump System”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2520-2523. doi:10.18429/JACoW-IPAC2022-THPOST035
[n] R. Brinkmann and W. Decking, “Space Charge Problems in the TESLA Damping Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5A15, pp. 1024-1026.
[n] B. M. Ramos et al., “Aluminum Vacuum Chamber for the Sirius Commissioning Undulators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3467-3470. doi:10.18429/JACoW-IPAC2021-WEPAB336
[n] R. Fedele, S. de Martino, and S. de Siena, “Coherent States in the Longitudinal Dynamics of Electron Beams in Particle Accelerators”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP029G, pp. 1350-1352.
[n] R. Lindberg and M. Borland, “Fringe field maps for transverse gradient bending magnets with curved poles”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPS01, unpublished.
[n] V. K. Grishin, B. S. Ishkhanov, and T. A. Novicova, “High Current FEL Oscillator on Base of MSU Electron Accelerators”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V032, pp. 889-890.
[n] S. G. Arutunian et al., “Vibrating Wire Scanner Parameters Optimization”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT003, pp. 2460-2462.
[n] T. Lensch and M. Werner, “Synchronized Post Mortem Trigger of the PETRA III MPS”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG032, pp. 98-100.
[n] M. Sch?â, S. Bondorf, and M. Kreider, “Verification of the FAIR Control System Using Deterministic Network Calculus”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 238-244. doi:10.18429/JACoW-ICALEPCS2017-TUCPL06
[n] X. X. Li, “RF Design and Cold Test of SCDTL Structure for Proton Therapy”, presented at the SAP'23, Xichang, China, Jul. 2023, paper TUPB037, unpublished.
[n] R. Beauregard, “Overview of Current and Future Platforms for Big Experiments/Different Types of Machines”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper WE2T01, unpublished.
[n] P. Bosland et al., “Tests of the Low Beta Cavities and Cryomodules for the SPIRAL 2 LINAC”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO003, pp. 171-175.
[n] K. Yanagida, H. Hanaki, and S. Suzuki, “Fifth-Order Moment Correction for Beam Position and Second-Order Moment Measurement”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 876-878. doi:10.18429/JACoW-LINAC2016-THPLR015
[n] G. Gisler and R. Faehl, “Self-Trapping Electron Ring Accelerators”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3204-3206.
[n] P. Sievers and M. Hoefert, “A Mega Watt Electron Positron Conversion Target - A Conceptual Design”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 133-136.
[n] J. Y. Huang et al., “PLS Beam Position Monitoring System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1115-1118.
[n] S. V. Barabin et al., “Tuned Delay Unit for a Stochastic Cooling System at NICA Collider”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2186-2189. doi:10.18429/JACoW-IPAC2021-TUPAB299
[n] D. Winklehner et al., “Summary of the Snowmass’21 Workshop on High Power Cyclotrons and FFAs”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper MOBI01, pp. 20-25.
[n] W. Fan et al., “Simulation Study of Intrabeam Scattering in Low Emittance Ring”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP090, pp. 1639-1641.
[n] V. K. Grishin, B. S. Ishkhanov, S. P. Likhachev, D. A. Rodionov, and V. I. Shvedunov, “Effective X-ray Bremsstrahlung Source (Is it Possible to Handle Quality of X-ray Bremsstrahlung?)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P111, pp. 3866-3868.
[n] V. G. Vaccaro et al., “Aclip: A 3 Ghz Side Coupled Linac For Protontherapy To Be Used As A Booster For 30 Mev Cyclotrons”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 172-176.
[n] Y. Iwasaki et al., “The Injection System of SAGA Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE048, pp. 3007-3009.
[n] G. Crecelius and R. Hoelzle, “Ion Source for the Juelich SNQ-Project”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1785-1788.
[n] S. Peggs, “RHIC Progress Report”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOY02A, pp. 13-17.
[n] R. Fedele and H. Schamel, “Kinetic Theory of Solitary Waves on Coasting Beams in Synchrotrons and Storage Rings”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP4B01, pp. 1558-1560.
[n] T. Lensch and M. Werner, “Cause Identification of Beam Losses in PETRA III by Time Correlation of Alarms”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD90, pp. 257-259.
[n] M. Rakic et al., “Updated analysis of beam halo measurements in LHC Run 2 and Run 3”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3175-3178. doi:10.18429/JACoW-IPAC2024-THPC67
[n] Y. Bao, G. Hansen, and D. V. Neuffer, “Phase Rotation of Muon Beams for Producing Intense Low-energy Muon Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1556-1558. doi:10.18429/JACoW-IPAC2016-TUPMY008
[n] G. Moritz, “Fast Pulsed SC Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEYCH01, pp. 132-136.
[n] A. Letchford, K. Bongardt, and M. Pabst, “Halo Formation of Bunched Beams in Periodic Focusing Systems”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP121, pp. 1767-1769.
[n] C. Diaz Cano, R. Abuter, T. R. Grudzien, N. Kornweibel, J. Sagatowski, and H. Tischer, “The Miniscule ELT Control Software: Design, Architecture and HW integration”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1010. doi:10.18429/JACoW-ICALEPCS2019-WEMPL006
[n] D. Schulte, “Emittance Preservation in the Main Linac of CLIC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP52C, pp. 478-480.
[n] H. Tian, M. J. Kelley, and C. E. Reece, “Basic Electropolishing Process Research and Development in Support of Improved Reliable Performance SRF Cavities for the Future Accelerators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP058, pp. 2135-2137.
[n] N. Akasaka et al., “C-band Linear Collider with C.M. Energy 500 GeV to 1 TeV”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP071G, pp. 492-494.
[n] W. Xu et al., “Theoretical Model of External Q Tuning for an SRF Cavity with Waveguide Tuner”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 794-796. doi:10.18429/JACoW-SRF2023-WEPWB089
[n] O. Kester et al., “Status of Construction and Commissioning of the GSI HITRAP Decelerator”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper FR-02, pp. 198-202.
[n] E. Karantzoulis, A. Carniel, S. Ferry, and S. Krecic, “Operational Advances at Elettra and its New Full Energy Injector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP020, pp. 2309-2311.
[n] G. Dugan et al., “The Extraction system of the NEVIS Synchrocyclotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1467-1470.
[n] L. Steder et al., “Medium Temperature Treatments of Superconducting Radio Frequency Cavities at DESY”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 840-843. doi:10.18429/JACoW-LINAC2022-THPOGE22
[n] M. Boscolo, M. Antonelli, and S. Guiducci, “Simulations and Measurements of the Touschek Background at DAFNE”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE030, pp. 1238-1240.
[n] J. Guo et al., “Design and Prototyping of the Electron Ion Collider Electron Storage Ring SRF Cavity”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 293-297. doi:10.18429/JACoW-SRF2023-MOPMB078
[n] D. Reynet et al., “Design of the ESS Spoke Cryomodule”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP089, pp. 357-360.
[n] A. Dhar, E. A. Nanni, M. A. K. Othman, and S. G. Tantawi, “Solid-State Driven X-Band Linac for Electron Microscopy”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2853-2855. doi:10.18429/JACoW-IPAC2021-WEPAB110
[n] A. Adelmann, S. R. A. Adam, M. Humbel, and P. A. Schmelzbach, “High Intensity Cyclotron Simulations: Towards Quantitative Predictions”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEAX04, pp. 202-204.
[n] M. Kihara, “The Japan Linear Collider Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOZ03A, pp. 63-67.
[n] G. Decker, S. G. Arutunian, M. R. Mailian, and I. E. Vasiniuk, “Hard X-Ray Synchrotron Radiation Measurements at the APS with Vibrating Wire Monitors”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper MOVTC02, pp. 36-40.
[n] H. Hattori et al., “Manufacturing Techniques of Full Scale Crab Cavities and a Simplified Co-Axial Coupler for KEKB”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP027, pp. 481-483.
[n] J. M. Nogiec, K. Trombly-Freytag, D. Walbridge, and E. Desavouret, “An XML Driven Framework for Test Control and Data Analysis”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP073, pp. XX-XX.
[n] J. C. Brunet, C. Hauviller, L. Leistam, A. Mathewson, C. Reymermier, and R. Veness, “Design Options for Vacuum Chambers in the LHC Experiments”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2485-2488.
[n] I. S. Guk et al., “Beam Injection in Recirculator SALO”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE050, pp. 3109-3110.
[n] A. V. Burov and V. A. Lebedev, “Suppression of Transverse Instability by a Digital Damper”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH065, pp. 2934-2936.
[n] T. K. Khoe, J. J. Livingood, and W. J. Ramler, “Proposed Midwest Tandem Cyclotron (MTC)”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A04, pp. XX-XX.
[n] G. Franchetti and I. Hofmann, “Optimizing Multiturn Injection with Space Charge and Linear Coupling”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5A06, pp. 1292-1294.
[n] A. O. Sidorin et al., “Design of the Nuclotron Booster in the NICA Project”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA014, pp. 68-70.
[n] N. Valverde Alonso et al., “RF Dipole Crab Cavity Testing for HL-LHC”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 687. doi:10.18429/JACoW-SRF2021-WEOCAV03
[n] I. Arfaoui, J. Cousty, and H. Safa, “On Local High Electric Field-Induced Modifications of a Niobium Oxide Surface”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP036, pp. 304-308.
[n] G. Bachy, C. Hauviller, R. Messerli, and M. Mottier, “Computer-Aided Engineering in High Energy Physics”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1146-1149.
[n] S. Deghaye, D. Jacquet, I. Kozsar, and J. Serrano, “OASIS: a New System to Acquire and Display the Analog Signals for LHC”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP502, pp. 359-361.
For LaTeX
Use Complete Form
For BibTeX
References
- J. C. Yang, L. T. Sun, and Y. J. Yuan, “Status of the HIAF Accelerator Facility in China”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper MOAI01, pp. 1-5.
- M. A. Rehman et al., “The First Trial of XY-Coupled Beam Phase Space Matching for Three-Dimensional Spiral Injection”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 553-556.
- V. Zvyagintsev et al., “Update on SCRF Development at TRIUMF”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper THAOR06, pp. 152-154.
- F. Naito, “The JAERI/KEK Joint Project and Its Performance”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH102, pp. 564-568.
- K. Fukami et al., “Beam Collimation System for the SPring-8 Top-up Operation”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP15009, pp. XX-XX.
- R. Xiang et al., “DC-SC Photoinjector with Low Emittance at Peking University”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE055, pp. 3325-3327.
- J. Sinsheimer et al., “Precision Insertion Device Control and Simultaneous Monochromator Fly Scanning for NSLS-II”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1245.
- D. W. Storm et al., “Operation Status of the Nevis Synchrocyclotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1634-1637.
- H. A. Martirosyan, W. Bothe, V. P. Goncharenko, O. A. Gusev, V. Ts. Nikogosyan, and K. A. Sadoyan, “Magnetic Field Flat-Top of Yerevan Synchrotron”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1220-1222.
- D. S?ínchez-Herranz et al., “Status of the Engineering Design of the IFMIF-DONES High Energy Beam Transport Line and Beam Dump System”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2520-2523.
- R. Brinkmann and W. Decking, “Space Charge Problems in the TESLA Damping Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5A15, pp. 1024-1026.
- B. M. Ramos et al., “Aluminum Vacuum Chamber for the Sirius Commissioning Undulators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3467-3470.
- R. Fedele, S. de Martino, and S. de Siena, “Coherent States in the Longitudinal Dynamics of Electron Beams in Particle Accelerators”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP029G, pp. 1350-1352.
- R. Lindberg and M. Borland, “Fringe field maps for transverse gradient bending magnets with curved poles”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS01, unpublished.
- V. K. Grishin, B. S. Ishkhanov, and T. A. Novicova, “High Current FEL Oscillator on Base of MSU Electron Accelerators”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3V032, pp. 889-890.
- S. G. Arutunian et al., “Vibrating Wire Scanner Parameters Optimization”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT003, pp. 2460-2462.
- T. Lensch and M. Werner, “Synchronized Post Mortem Trigger of the PETRA III MPS”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG032, pp. 98-100.
- M. Sch?â, S. Bondorf, and M. Kreider, “Verification of the FAIR Control System Using Deterministic Network Calculus”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 238-244.
- X. X. Li, “RF Design and Cold Test of SCDTL Structure for Proton Therapy”, presented at the 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, paper TUPB037, unpublished.
- R. Beauregard, “Overview of Current and Future Platforms for Big Experiments/Different Types of Machines”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WE2T01, unpublished.
- P. Bosland et al., “Tests of the Low Beta Cavities and Cryomodules for the SPIRAL 2 LINAC”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO003, pp. 171-175.
- K. Yanagida, H. Hanaki, and S. Suzuki, “Fifth-Order Moment Correction for Beam Position and Second-Order Moment Measurement”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 876-878.
- G. Gisler and R. Faehl, “Self-Trapping Electron Ring Accelerators”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3204-3206.
- P. Sievers and M. Hoefert, “A Mega Watt Electron Positron Conversion Target - A Conceptual Design”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 133-136.
- J. Y. Huang et al., “PLS Beam Position Monitoring System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1115-1118.
- S. V. Barabin et al., “Tuned Delay Unit for a Stochastic Cooling System at NICA Collider”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2186-2189.
- D. Winklehner et al., “Summary of the Snowmass’21 Workshop on High Power Cyclotrons and FFAs”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper MOBI01, pp. 20-25.
- W. Fan et al., “Simulation Study of Intrabeam Scattering in Low Emittance Ring”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP090, pp. 1639-1641.
- V. K. Grishin, B. S. Ishkhanov, S. P. Likhachev, D. A. Rodionov, and V. I. Shvedunov, “Effective X-ray Bremsstrahlung Source (Is it Possible to Handle Quality of X-ray Bremsstrahlung?)”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P111, pp. 3866-3868.
- V. G. Vaccaro et al., “Aclip: A 3 Ghz Side Coupled Linac For Protontherapy To Be Used As A Booster For 30 Mev Cyclotrons”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 172-176.
- Y. Iwasaki et al., “The Injection System of SAGA Light Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE048, pp. 3007-3009.
- G. Crecelius and R. Hoelzle, “Ion Source for the Juelich SNQ-Project”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1785-1788.
- S. Peggs, “RHIC Progress Report”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOY02A, pp. 13-17.
- R. Fedele and H. Schamel, “Kinetic Theory of Solitary Waves on Coasting Beams in Synchrotrons and Storage Rings”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP4B01, pp. 1558-1560.
- T. Lensch and M. Werner, “Cause Identification of Beam Losses in PETRA III by Time Correlation of Alarms”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD90, pp. 257-259.
- M. Rakic et al., “Updated analysis of beam halo measurements in LHC Run 2 and Run 3”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC67, pp. 3175-3178.
- Y. Bao, G. Hansen, and D. V. Neuffer, “Phase Rotation of Muon Beams for Producing Intense Low-energy Muon Beams”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1556-1558.
- G. Moritz, “Fast Pulsed SC Magnets”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEYCH01, pp. 132-136.
- A. Letchford, K. Bongardt, and M. Pabst, “Halo Formation of Bunched Beams in Periodic Focusing Systems”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP121, pp. 1767-1769.
- C. Diaz Cano, R. Abuter, T. R. Grudzien, N. Kornweibel, J. Sagatowski, and H. Tischer, “The Miniscule ELT Control Software: Design, Architecture and HW integration”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1010.
- D. Schulte, “Emittance Preservation in the Main Linac of CLIC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP52C, pp. 478-480.
- H. Tian, M. J. Kelley, and C. E. Reece, “Basic Electropolishing Process Research and Development in Support of Improved Reliable Performance SRF Cavities for the Future Accelerators”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP058, pp. 2135-2137.
- N. Akasaka et al., “C-band Linear Collider with C.M. Energy 500 GeV to 1 TeV”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP071G, pp. 492-494.
- W. Xu et al., “Theoretical Model of External Q Tuning for an SRF Cavity with Waveguide Tuner”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB089, pp. 794-796.
- O. Kester et al., “Status of Construction and Commissioning of the GSI HITRAP Decelerator”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper FR-02, pp. 198-202.
- E. Karantzoulis, A. Carniel, S. Ferry, and S. Krecic, “Operational Advances at Elettra and its New Full Energy Injector”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP020, pp. 2309-2311.
- G. Dugan et al., “The Extraction system of the NEVIS Synchrocyclotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1467-1470.
- L. Steder et al., “Medium Temperature Treatments of Superconducting Radio Frequency Cavities at DESY”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 840-843.
- M. Boscolo, M. Antonelli, and S. Guiducci, “Simulations and Measurements of the Touschek Background at DAFNE”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE030, pp. 1238-1240.
- J. Guo et al., “Design and Prototyping of the Electron Ion Collider Electron Storage Ring SRF Cavity”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB078, pp. 293-297.
- D. Reynet et al., “Design of the ESS Spoke Cryomodule”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP089, pp. 357-360.
- A. Dhar, E. A. Nanni, M. A. K. Othman, and S. G. Tantawi, “Solid-State Driven X-Band Linac for Electron Microscopy”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2853-2855.
- A. Adelmann, S. R. A. Adam, M. Humbel, and P. A. Schmelzbach, “High Intensity Cyclotron Simulations: Towards Quantitative Predictions”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEAX04, pp. 202-204.
- M. Kihara, “The Japan Linear Collider Project”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOZ03A, pp. 63-67.
- G. Decker, S. G. Arutunian, M. R. Mailian, and I. E. Vasiniuk, “Hard X-Ray Synchrotron Radiation Measurements at the APS with Vibrating Wire Monitors”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper MOVTC02, pp. 36-40.
- H. Hattori et al., “Manufacturing Techniques of Full Scale Crab Cavities and a Simplified Co-Axial Coupler for KEKB”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP027, pp. 481-483.
- J. M. Nogiec, K. Trombly-Freytag, D. Walbridge, and E. Desavouret, “An XML Driven Framework for Test Control and Data Analysis”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP073, pp. XX-XX.
- J. C. Brunet, C. Hauviller, L. Leistam, A. Mathewson, C. Reymermier, and R. Veness, “Design Options for Vacuum Chambers in the LHC Experiments”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2485-2488.
- I. S. Guk et al., “Beam Injection in Recirculator SALO”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE050, pp. 3109-3110.
- A. V. Burov and V. A. Lebedev, “Suppression of Transverse Instability by a Digital Damper”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH065, pp. 2934-2936.
- T. K. Khoe, J. J. Livingood, and W. J. Ramler, “Proposed Midwest Tandem Cyclotron (MTC)”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A04, pp. XX-XX.
- G. Franchetti and I. Hofmann, “Optimizing Multiturn Injection with Space Charge and Linear Coupling”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5A06, pp. 1292-1294.
- A. O. Sidorin et al., “Design of the Nuclotron Booster in the NICA Project”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUPSA014, pp. 68-70.
- N. Valverde Alonso et al., “RF Dipole Crab Cavity Testing for HL-LHC”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 687.
- I. Arfaoui, J. Cousty, and H. Safa, “On Local High Electric Field-Induced Modifications of a Niobium Oxide Surface”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP036, pp. 304-308.
- G. Bachy, C. Hauviller, R. Messerli, and M. Mottier, “Computer-Aided Engineering in High Energy Physics”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1146-1149.
- S. Deghaye, D. Jacquet, I. Kozsar, and J. Serrano, “OASIS: a New System to Acquire and Display the Analog Signals for LHC”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP502, pp. 359-361.
Back to search