Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. Ohuchi et al., “Solenoid Field Calculation of the SuperKEKB Interaction Region”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD023, pp. 3548-3550.
[n] C. Mai, B. B??sing, A. Held, S. Khan, and D. Krieg, “Towards Arbitrary Pulse Shapes in the Terahertz Domain”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3977-3979. doi:10.18429/JACoW-IPAC2021-THPAB097
[n] R. Baiod, D. J. Harding, D. E. Johnson, P. S. Martin, and S. Mishra, “The Main Injector Trim Dipole Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP04, pp. 1331-1333.
[n] H. Nakano et al., “Upgrade of low-level RF system for J-PARC linac RFQ-TS”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1764-1767. doi:10.18429/JACoW-IPAC2025-WEPB019
[n] N. Ohuchi et al., “Operation of Superconducting Final Focus Magnet System of SuperKEKB”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, paper WEOBB04, pp. XX-XX.
[n] M. S. Chun et al., “Development of High Power Electron Accelerator for Industrial Applications”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7A09, pp. 2612-2614.
[n] A. Pandey et al., “Operational Experience with the Mechanical Tuner Systems in the Superconducting Linac at IUAC”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 809. doi:10.18429/JACoW-SRF2021-THPCAV011
[n] G. P. Jackson et al., “Luminosity Lifetime in the Tevatron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 556-559.
[n] R. Bartolini and T. Pulampong, “Ultra-low Emittance Upgrade Options for Third Generation Light Sources”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA067, pp. 237-239.
[n] M. K. Sullivan et al., “IR Upgrade Plans for the PEP-II B-Factory”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT141, pp. 869-871.
[n] J. Dey and J. M. Steimel, “Improving the Linearity of Ferrite Loaded Cavities Using Feedback”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH046, pp. 873-875.
[n] C. R. Kerns, “Radiation Hardened Proton Meter for Fermilab External Beam Lines”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1104-1109.
[n] P. Thingstad, “Inert Gas Purifier for SLAC's Two-Meter Steamer Chamber”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 659-661.
[n] T. Elioff, “Proton-Electron-Positron Design Study”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 1039-1045.
[n] T. Roggen, H. De Gersem, B. Masschaele, W. Ackermann, S. Franke, and T. Weiland, “Embedding Finite Element Results for Accelerator Components in a Moment Approach Beam Dynamics Code”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC088, pp. 2217-2219.
[n] D. E. Johnson, C. S. Mishra, S. D. Holmes, N. Gelfand, J. A. Holt, and L. Michelotti, “Design and Simulation of the Antiproton Recycler Lattice”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W016, pp. 997-999.
[n] B. Singh, M. Apollonio, E. C. Longhi, R. Bartolini, and T. Pulampong, “Investigation and Test of the Possibility of Reducing the Emittance of the Diamond Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA066, pp. 234-236.
[n] H. Dewa et al., “Photoelectron RF Gun Designed as a Single Cell Cavity”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF046, pp. 411-413.
[n] J. N. Corlett et al., “The Next Linear Collider Damping Ring Complex”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA20, pp. 3429-3431.
[n] S. Bettoni, B. Beutner, and V. A. Goryashko, “Microbunching Instability Studies in SwissFEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP064, pp. 1744-1746.
[n] S. Holm and P.-U. Renberg, “Initial Operation of the Reconstructed Uppsala Synchrocyclotron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 353-356.
[n] C. Liu, W. Ackermann, W. F. O. Müller, and T. Weiland, “Various Approaches to Electromagnetic Field Simulations for RF Cavities”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC093, pp. 2226-2228.
[n] H.-D. Nuhn, R. Boyce, R. Gould, H. Winick, R. Yotam, and B. Youngman, “A 5 GeV Injector for PEP”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1217-1220.
[n] Z. Mart?¡, G. Benedetti, M. Carl?á, U. Iriso, and L. Torino, “Full Coupling Studies at ALBA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1667-1670. doi:10.18429/JACoW-IPAC2022-WEOZSP4
[n] T. Pulampong and R. Bartolini, “A Non-linear Injection Kicker for Diamond Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA065, pp. 2268-2270.
[n] B. Bayanov et al., “Liquid Lithium Lens with High Magnetic Fields”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP58, pp. 3086-3088.
[n] S. Ghosh et al., “Developmental and Operational Aspects of Nb QWR Based Heavy Ion LINAC System at IUAC Delhi”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP092, pp. 640-642.
[n] R. M. Bionta, “Characterization of X-Ray FEL Radiation”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THOB003, pp. XX-XX.
[n] C. Taylor and R. B. Meuser, “Conceptual Magnet Design for an Iron-Free Colliding Beam Acelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2042-2045.
For LaTeX
Use Complete Form
For BibTeX
References
- N. Ohuchi et al., “Solenoid Field Calculation of the SuperKEKB Interaction Region”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD023, pp. 3548-3550.
- C. Mai, B. B??sing, A. Held, S. Khan, and D. Krieg, “Towards Arbitrary Pulse Shapes in the Terahertz Domain”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3977-3979.
- R. Baiod, D. J. Harding, D. E. Johnson, P. S. Martin, and S. Mishra, “The Main Injector Trim Dipole Magnets”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAP04, pp. 1331-1333.
- H. Nakano et al., “Upgrade of low-level RF system for J-PARC linac RFQ-TS”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB019, pp. 1764-1767.
- N. Ohuchi et al., “Operation of Superconducting Final Focus Magnet System of SuperKEKB”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, paper WEOBB04, pp. XX-XX.
- M. S. Chun et al., “Development of High Power Electron Accelerator for Industrial Applications”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7A09, pp. 2612-2614.
- A. Pandey et al., “Operational Experience with the Mechanical Tuner Systems in the Superconducting Linac at IUAC”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 809.
- G. P. Jackson et al., “Luminosity Lifetime in the Tevatron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 556-559.
- R. Bartolini and T. Pulampong, “Ultra-low Emittance Upgrade Options for Third Generation Light Sources”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA067, pp. 237-239.
- M. K. Sullivan et al., “IR Upgrade Plans for the PEP-II B-Factory”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT141, pp. 869-871.
- J. Dey and J. M. Steimel, “Improving the Linearity of Ferrite Loaded Cavities Using Feedback”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH046, pp. 873-875.
- C. R. Kerns, “Radiation Hardened Proton Meter for Fermilab External Beam Lines”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1104-1109.
- P. Thingstad, “Inert Gas Purifier for SLAC's Two-Meter Steamer Chamber”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 659-661.
- T. Elioff, “Proton-Electron-Positron Design Study”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 1039-1045.
- T. Roggen, H. De Gersem, B. Masschaele, W. Ackermann, S. Franke, and T. Weiland, “Embedding Finite Element Results for Accelerator Components in a Moment Approach Beam Dynamics Code”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC088, pp. 2217-2219.
- D. E. Johnson, C. S. Mishra, S. D. Holmes, N. Gelfand, J. A. Holt, and L. Michelotti, “Design and Simulation of the Antiproton Recycler Lattice”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W016, pp. 997-999.
- B. Singh, M. Apollonio, E. C. Longhi, R. Bartolini, and T. Pulampong, “Investigation and Test of the Possibility of Reducing the Emittance of the Diamond Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA066, pp. 234-236.
- H. Dewa et al., “Photoelectron RF Gun Designed as a Single Cell Cavity”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF046, pp. 411-413.
- J. N. Corlett et al., “The Next Linear Collider Damping Ring Complex”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA20, pp. 3429-3431.
- S. Bettoni, B. Beutner, and V. A. Goryashko, “Microbunching Instability Studies in SwissFEL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP064, pp. 1744-1746.
- S. Holm and P.-U. Renberg, “Initial Operation of the Reconstructed Uppsala Synchrocyclotron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 353-356.
- C. Liu, W. Ackermann, W. F. O. Müller, and T. Weiland, “Various Approaches to Electromagnetic Field Simulations for RF Cavities”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC093, pp. 2226-2228.
- H.-D. Nuhn, R. Boyce, R. Gould, H. Winick, R. Yotam, and B. Youngman, “A 5 GeV Injector for PEP”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1217-1220.
- Z. Mart?¡, G. Benedetti, M. Carl?á, U. Iriso, and L. Torino, “Full Coupling Studies at ALBA”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1667-1670.
- T. Pulampong and R. Bartolini, “A Non-linear Injection Kicker for Diamond Light Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA065, pp. 2268-2270.
- B. Bayanov et al., “Liquid Lithium Lens with High Magnetic Fields”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP58, pp. 3086-3088.
- S. Ghosh et al., “Developmental and Operational Aspects of Nb QWR Based Heavy Ion LINAC System at IUAC Delhi”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP092, pp. 640-642.
- R. M. Bionta, “Characterization of X-Ray FEL Radiation”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THOB003, pp. XX-XX.
- C. Taylor and R. B. Meuser, “Conceptual Magnet Design for an Iron-Free Colliding Beam Acelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2042-2045.
Back to search