Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Myers, “High Energy Operation of LEP2”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEBR1, pp. 299-303.
[n] J. M. Maxson, I. V. Bazarov, B. M. Dunham, and K. W. Smolenski, “Optimization of DC Photogun Electrode Geometry”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP245, pp. 1945-1947.
[n] D. Zhu, R. T. Dowd, and Y. E. Tan, “Study of Material Choice in Beam Dumps for Energetic Electron Beams”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 721-723. doi:10.18429/JACoW-IPAC2022-MOPOMS039
[n] B. Kalantari and T. Korhonen, “Timekeeping Mechanism at SLS/APS Control System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT049, pp. 1948-1950.
[n] J. M. Maxson, “Ultrafast Electron Diffraction at Cornell Using Low Emittance Photocathodes”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper WEZE2, unpublished.
[n] D. Zhu, A. W. Cross, Y. E. Tan, and L. Zhang, “The Conceptual Design of a 36 GHz RF Undulator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1676-1678. doi:10.18429/JACoW-IPAC2019-TUPRB002
[n] S. Myers, “Simulation of the Beam-Beam Effect During Injection, Accumulation and Acceleration in LEP”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2466-2469.
[n] K. Ko et al., “Design of a High-Power Test Model of the PEP-II RF Cavity”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1039-1042.
[n] J. Escallier et al., “Technology Development for React and Wind Common Coil Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAB011, pp. 214-216.
[n] C. Bruni et al., “The ARC-EN-CIEL FEL Proposal”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH048, pp. 146-149.
[n] C. J. Wang, K. H. Hu, and C. Kuo, “Integration of New Digital BPM in the Taiwan Light Source”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_050.
[n] C. Kuo, C. J. Wang, and K. Hsu, “Electronic Logbook by Using the Hypertext Preprocessor”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_086.
[n] S. Suphakul, S. Rimjaem, and C. Thongbai, “Beam Dynamics Simulation and Optimization of Electron Beam Properties for IR-FELs at Chiang Mai University”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD34, pp. 445-448.
[n] J. Preble et al., “SNS Cryomodule Performance”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAA001, pp. 457-461.
[n] C. H. Kuo, K. H. Hu, D. Li, J. Chen, C. J. Wang, and K. T. Hsu, “Digital Beam Position Monitor Development at NSRRC”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP582, pp. XX-XX.
[n] S. Myers, “Stabilization of the Fast Head-Tail Instability by Feedback”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 503-508.
[n] L. Harwood and C. Reece, “CEBAF at 12 25 GeV”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper TA008, pp. XX-XX.
[n] C. Chianelli, A. Curtoni, J. Jimenez, J. Jodet, G. Jouve, and A. Zeitoun-Fakiris, “Electron Emission from Niobium Samples for High Applied Electric Fields”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1322-1325.
[n] J. C. T. Thangaraj et al., “Compact, High-Power Superconducting Electron Linear Accelerators for Environmental and Industrial Applications: Projects and Status”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper THIXA07, unpublished.
[n] C. Reece, “Overview of SRF-related Activities at Jefferson Lab”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper TL018, pp. XX-XX.
[n] S. Xu, R. Laird, F. Lenkszus, and H. Shang, “EPICS IOCcore Real-Time Performance Measurements on Coldfire Module”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL033, pp. 94-96.
[n] A. D. Alarcon, “SwissFEL Undulator Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 196. doi:10.18429/JACoW-ICALEPCS2019-MOPHA006
[n] E. Pirez, P. Musumeci, D. Alesini, and J. M. Maxson, “New 1.4 Cell RF Photoinjector Design for High Brightness Beam Generation”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1083-1086. doi:10.18429/JACoW-NAPAC2016-THA2CO03
[n] C. J. R. Duncan et al., “A Generic Software Platform for Rapid Prototyping of Online Control Algorithms”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4063-4065. doi:10.18429/JACoW-IPAC2019-THPRB100
[n] M. Korostelev and F. Zimmermann, “Nonlinear Optimization of a Low Emittance CLIC Damping Ring Lattice”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG023, pp. 2315-2317.
[n] R. M. Lill et al., “Design and Performance of the LCLS Cavity BPM System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN111, pp. 4366-4368.
[n] D. Howard and H. Lancaster, “Loop Coupling to a Radio Frequency Quadrupole Resonator (RFQ)”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper E15, pp. 194-196.
[n] A. Streun et al., “Sub-picosecond X-ray Source FEMTO at SLS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS062, pp. 3427-3429.
[n] U. Scheeler et al., “Recommissioning of the Marburg Ion-beam Therapy Centre (MIT) Accelerator Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1908-1910. doi:10.18429/JACoW-IPAC2016-TUPOY004
[n] M. Schaer et al., “Study of a C-band Standing-wave Gun for the SwissFEL Injector”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 698-700. doi:10.18429/JACoW-IPAC2014-MOPRI043
For LaTeX
Use Complete Form
For BibTeX
References
- S. Myers, “High Energy Operation of LEP2”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEBR1, pp. 299-303.
- J. M. Maxson, I. V. Bazarov, B. M. Dunham, and K. W. Smolenski, “Optimization of DC Photogun Electrode Geometry”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP245, pp. 1945-1947.
- D. Zhu, R. T. Dowd, and Y. E. Tan, “Study of Material Choice in Beam Dumps for Energetic Electron Beams”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 721-723.
- B. Kalantari and T. Korhonen, “Timekeeping Mechanism at SLS/APS Control System”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT049, pp. 1948-1950.
- J. M. Maxson, “Ultrafast Electron Diffraction at Cornell Using Low Emittance Photocathodes”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper WEZE2, unpublished.
- D. Zhu, A. W. Cross, Y. E. Tan, and L. Zhang, “The Conceptual Design of a 36 GHz RF Undulator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1676-1678.
- S. Myers, “Simulation of the Beam-Beam Effect During Injection, Accumulation and Acceleration in LEP”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2466-2469.
- K. Ko et al., “Design of a High-Power Test Model of the PEP-II RF Cavity”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1039-1042.
- J. Escallier et al., “Technology Development for React and Wind Common Coil Magnets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOAB011, pp. 214-216.
- C. Bruni et al., “The ARC-EN-CIEL FEL Proposal”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH048, pp. 146-149.
- C. J. Wang, K. H. Hu, and C. Kuo, “Integration of New Digital BPM in the Taiwan Light Source”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_050.
- C. Kuo, C. J. Wang, and K. Hsu, “Electronic Logbook by Using the Hypertext Preprocessor”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_086.
- S. Suphakul, S. Rimjaem, and C. Thongbai, “Beam Dynamics Simulation and Optimization of Electron Beam Properties for IR-FELs at Chiang Mai University”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper WEPD34, pp. 445-448.
- J. Preble et al., “SNS Cryomodule Performance”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAA001, pp. 457-461.
- C. H. Kuo, K. H. Hu, D. Li, J. Chen, C. J. Wang, and K. T. Hsu, “Digital Beam Position Monitor Development at NSRRC”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP582, pp. XX-XX.
- S. Myers, “Stabilization of the Fast Head-Tail Instability by Feedback”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 503-508.
- L. Harwood and C. Reece, “CEBAF at 12 25 GeV”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper TA008, pp. XX-XX.
- C. Chianelli, A. Curtoni, J. Jimenez, J. Jodet, G. Jouve, and A. Zeitoun-Fakiris, “Electron Emission from Niobium Samples for High Applied Electric Fields”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1322-1325.
- J. C. T. Thangaraj et al., “Compact, High-Power Superconducting Electron Linear Accelerators for Environmental and Industrial Applications: Projects and Status”, presented at the 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper THIXA07, unpublished.
- C. Reece, “Overview of SRF-related Activities at Jefferson Lab”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper TL018, pp. XX-XX.
- S. Xu, R. Laird, F. Lenkszus, and H. Shang, “EPICS IOCcore Real-Time Performance Measurements on Coldfire Module”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL033, pp. 94-96.
- A. D. Alarcon, “SwissFEL Undulator Control System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 196.
- E. Pirez, P. Musumeci, D. Alesini, and J. M. Maxson, “New 1.4 Cell RF Photoinjector Design for High Brightness Beam Generation”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1083-1086.
- C. J. R. Duncan et al., “A Generic Software Platform for Rapid Prototyping of Online Control Algorithms”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4063-4065.
- M. Korostelev and F. Zimmermann, “Nonlinear Optimization of a Low Emittance CLIC Damping Ring Lattice”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAG023, pp. 2315-2317.
- R. M. Lill et al., “Design and Performance of the LCLS Cavity BPM System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN111, pp. 4366-4368.
- D. Howard and H. Lancaster, “Loop Coupling to a Radio Frequency Quadrupole Resonator (RFQ)”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper E15, pp. 194-196.
- A. Streun et al., “Sub-picosecond X-ray Source FEMTO at SLS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS062, pp. 3427-3429.
- U. Scheeler et al., “Recommissioning of the Marburg Ion-beam Therapy Centre (MIT) Accelerator Facility”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1908-1910.
- M. Schaer et al., “Study of a C-band Standing-wave Gun for the SwissFEL Injector”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 698-700.
Back to search