Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. V. Plotnikov et al., “First Section of a 352 MHz Prototype Alvarez DTL Tank for the CERN SPL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS055, pp. 1621-1623.
[n] F. Schlander, S. Aderhold, E. Elsen, D. Reschke, and M. Wenskat, “Quality Assessment for Industrially Produced High-Gradient Superconducting Cavities”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC085, pp. 274-276.
[n] L. Bohn, “Recirculating Accelerator Driver for a High-Power Free-Electron Laser: A Design Overview”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V044, pp. 909-911.
[n] H. Ogawa, N. Sei, and K. Yamada, “Characteristics of Inverse Compton X-Rays Generated Inside the NIJI-IV Free Electron Laser Oscillators”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper TUPA26, pp. 246-249.
[n] M. Lomperski, G. Trowitzsch, S. Weisse, and P. Duval, “Status of a Versatile Video System at PITZ, DESY-2 and EMBL Hamburg”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA31, pp. 380-382.
[n] S. Pei et al., “Physical Design of the 500 MeV Electron Linac for the High Energy Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1404-1406. doi:10.18429/JACoW-IPAC2018-TUPMF061
[n] M. Wenskat and L. Steder, “Characterization of Optical Surface Properties of 1.3 GHz SRF Cavities for the European XFEL”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB085, pp. 795-798.
[n] L. R. Brederode, A. Marassi, and S. Riggi, “SKA Telescope Manager Project Status Report”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. XX-XX. doi:10.18429/JACoW-ICALEPCS2015-MOA3O01
[n] T. C. Fan, C. S. Hwang, and F. Y. Lin, “The Dynamic Effect of the Vertical Field Corrector of the 1.8 T Wiggler”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP117G, pp. 2561-2563.
[n] G. Velev, G. Ambrosio, G. Chlachidze, J. DiMarco, S. Stoynev, and T. Strauss, “Measurements of Decay and Snapback in Nb?Sn Accelerator Magnets at Fermilab”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4342-4345. doi:10.18429/JACoW-IPAC2019-THPTS100
[n] S. Papadopoulos et al., “Experience with the Conditioning of Linac4 RF Cavities”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 985-988. doi:10.18429/JACoW-LINAC2016-THPLR060
[n] J. Zheng, K. Chin, J. M. J. Madey, and E. Szarmes, “Simulations of the Newark FIR FEL Operation”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS59, pp. XX-XX.
[n] D. Kayran et al., “First Test Results from SRF Photoinjector for the R&D ERL at BNL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 748-750. doi:10.18429/JACoW-IPAC2014-MOPRI064
[n] D. Kashinskiy, A. Kolomiets, S. Minaev, V. Pershin, B. Y. Sharkov, and T. Tretyakova, “Engineering Design of High-current 81.36 MHz RFQ with Elliptic Coupling Windows”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT123, pp. 2143-2145.
[n] A. Laxdal et al., “High Power Allison Scanner for Electrons”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper TUCP04, pp. 133-135.
[n] J. L. Bailey, D. Capatina, J. W. Morgan, and H.-D. Nuhn, “An Instrument Design for the Accurate Determination of the Electron Beam Location in the Linac Coherent Light Source Undulator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN102, pp. 4324-4326.
[n] C. P. Liu, C. M. Cheng, F. Z. Hsiao, T. Y. Huang, and H. H. Tsai, “Development of a Condenser for the Helium Phase Separator at NSRRC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD003, pp. 2501-2503.
[n] S.-H. Lee, D. E. Kim, S. Sasaki, I. Vasserman, and D. R. Walters, “Magnetic Properties of Undulator Vacuum Chamber Materials for the Linac Coherent Light Source”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUOC003, pp. XX-XX.
[n] P. Kneisel, J. Halbritter, and O. Stoltz, “Investigations of a Superconducting Beam Tube Niobium Cavity at S-Band”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 63-68.
[n] R. Katayama et al., “High-Q/High-G R&D at KEK Using 9-Cell TESLA-Shaped Niobium Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 268. doi:10.18429/JACoW-SRF2021-MOPCAV006
For LaTeX
Use Complete Form
For BibTeX
References
- S. V. Plotnikov et al., “First Section of a 352 MHz Prototype Alvarez DTL Tank for the CERN SPL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS055, pp. 1621-1623.
- F. Schlander, S. Aderhold, E. Elsen, D. Reschke, and M. Wenskat, “Quality Assessment for Industrially Produced High-Gradient Superconducting Cavities”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC085, pp. 274-276.
- L. Bohn, “Recirculating Accelerator Driver for a High-Power Free-Electron Laser: A Design Overview”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3V044, pp. 909-911.
- H. Ogawa, N. Sei, and K. Yamada, “Characteristics of Inverse Compton X-Rays Generated Inside the NIJI-IV Free Electron Laser Oscillators”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper TUPA26, pp. 246-249.
- M. Lomperski, G. Trowitzsch, S. Weisse, and P. Duval, “Status of a Versatile Video System at PITZ, DESY-2 and EMBL Hamburg”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA31, pp. 380-382.
- S. Pei et al., “Physical Design of the 500 MeV Electron Linac for the High Energy Photon Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1404-1406.
- M. Wenskat and L. Steder, “Characterization of Optical Surface Properties of 1.3 GHz SRF Cavities for the European XFEL”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB085, pp. 795-798.
- L. R. Brederode, A. Marassi, and S. Riggi, “SKA Telescope Manager Project Status Report”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. XX-XX.
- T. C. Fan, C. S. Hwang, and F. Y. Lin, “The Dynamic Effect of the Vertical Field Corrector of the 1.8 T Wiggler”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP117G, pp. 2561-2563.
- G. Velev, G. Ambrosio, G. Chlachidze, J. DiMarco, S. Stoynev, and T. Strauss, “Measurements of Decay and Snapback in Nb?Sn Accelerator Magnets at Fermilab”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4342-4345.
- S. Papadopoulos et al., “Experience with the Conditioning of Linac4 RF Cavities”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 985-988.
- J. Zheng, K. Chin, J. M. J. Madey, and E. Szarmes, “Simulations of the Newark FIR FEL Operation”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS59, pp. XX-XX.
- D. Kayran et al., “First Test Results from SRF Photoinjector for the R&D ERL at BNL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 748-750.
- D. Kashinskiy, A. Kolomiets, S. Minaev, V. Pershin, B. Y. Sharkov, and T. Tretyakova, “Engineering Design of High-current 81.36 MHz RFQ with Elliptic Coupling Windows”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT123, pp. 2143-2145.
- A. Laxdal et al., “High Power Allison Scanner for Electrons”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper TUCP04, pp. 133-135.
- J. L. Bailey, D. Capatina, J. W. Morgan, and H.-D. Nuhn, “An Instrument Design for the Accurate Determination of the Electron Beam Location in the Linac Coherent Light Source Undulator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN102, pp. 4324-4326.
- C. P. Liu, C. M. Cheng, F. Z. Hsiao, T. Y. Huang, and H. H. Tsai, “Development of a Condenser for the Helium Phase Separator at NSRRC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD003, pp. 2501-2503.
- S.-H. Lee, D. E. Kim, S. Sasaki, I. Vasserman, and D. R. Walters, “Magnetic Properties of Undulator Vacuum Chamber Materials for the Linac Coherent Light Source”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUOC003, pp. XX-XX.
- P. Kneisel, J. Halbritter, and O. Stoltz, “Investigations of a Superconducting Beam Tube Niobium Cavity at S-Band”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 63-68.
- R. Katayama et al., “High-Q/High-G R&D at KEK Using 9-Cell TESLA-Shaped Niobium Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 268.
Back to search