Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. P. Liu et al., “Cryogenic system for BEPCII superconducting cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP19, pp. XX-XX.
[n] H. O. C. Duarte, P. P. S. Freitas, A. R. D. Rodrigues, R. M. Seraphim, and T. M. da Rocha, “Design Review of Bellows RF-Shielding Types and New Concepts for Sirius”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 53-56. doi:10.18429/JACoW-IPAC2019-MOPGW001
[n] H. Frese and G. Hochweller, “The Serial Data Acquisition System at PETRA”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3385-3387.
[n] J. P. Edelen et al., “A Flexible EPICS Framework for Sample Alignment at Neutron Beamlines”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 836-840. doi:10.18429/JACoW-ICALEPCS2023-TUPDP113
[n] R. Martini, M. Br?ñger, J. L. Salmon, and A. Suwalska, “Tools and Procedures for High Quality Technical Infrastructure Monitoring Reference Data at CERN”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1036-1039. doi:10.18429/JACoW-ICALEPCS2015-WEPGF141
[n] N. Fuster-Martinez et al., “Aperture Measurements with AC Dipole at the Large Hadron Collider”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 212-215. doi:10.18429/JACoW-IPAC2018-MOPMF048
[n] L. Pivetta et al., “HDB++: A New Archiving System for TANGO”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 652-655. doi:10.18429/JACoW-ICALEPCS2015-WED3O04
[n] C.-M. Cheng et al., “The Issue with XBPM2 in the TPS Front End”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM073, unpublished.
[n] L. H. Waites, J. M. Conrad, J. Smolsky, and D. Winklehner, “Matching of an RFQ and Multicusp Ion Source with Compact LEBT”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 546-549. doi:10.18429/JACoW-IPAC2021-MOPAB159
[n] I. V. Pogorelov et al., “Machine Learning Based Noise Reduction of Neutron Camera Images at ORNL”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 841-845. doi:10.18429/JACoW-ICALEPCS2023-TUPDP114
[n] J. C. Chang, J. R. Chen, Y. C. Chung, C. Y. Liu, and Z. D. Tsai, “De-Ionized Cooling Water System Study and Improvement at TLS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG024, pp. 1479-1481.
[n] M. Di Carlo, M. Dolci, P. Harding, J. B. Morgado, B. Ribeiro, and U. Yilmaz, “CI-CD Practices at SKA”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 322-329. doi:10.18429/JACoW-ICALEPCS2021-TUBL04
[n] A. Regan, S. Kwon, M. Prokop, T. Rohlev, D. Thomson, and H. Ma, “The SNS Linac RF Control System”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH104, pp. 574-576.
[n] V. G. Vaccaro et al., “A New Tuning Module for Resonant Coupling Structures”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT005, pp. 973-975.
[n] L. G. Ratner, F. Hornstra, S. Marcowitz, N. Reay, T. Romanowski, and R. Sherr, “Simultaneous Multiple Targeting Techniques”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 170-172.
[n] Y. Z. Chen et al., “Beam Diagnostic at SDUV-FEL”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper FROA3, pp. 711-713.
[n] L. Sanfelici et al., “Carbon-Steel/poliethylene Radiation Enclosures for the Sirius Beamlines”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 223-225. doi:10.18429/JACoW-MEDSI2016-TUPE26
[n] T. Gutberlet, “Neutrons for Today and Tomorrow - the HBS Project for Compact Accelerator Based Neutron Sources”, presented at the IPAC'21, Campinas, Brazil, May 2021, paper THXC04, unpublished.
[n] M. Bai, R. Calaga, F. Pilat, T. Satogata, F. Schmidt, and R. Tomas, “Measurement of Linear Coupling Resonance in RHIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB073, pp. 2207-2209.
[n] G. Bezzon et al., “Construction and Commissioning of the RFQ for the CERN Lead-Ion Facility”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-12, pp. 722-724.
[n] J. Q. Li, “Production of intense carbon beams with permanent magnet ECR ion sources”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper FRT7AUCO24, unpublished.
[n] B. Bogdanovitch, V. Senioukov, A. Koroliov, and K. Simonov, “Application of Low Energy Electron Beams for Technology and Medicine”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP142, pp. 2570-2572.
[n] D. Guilhem, J.-L. Lemaire, and S. J. Pichon, “Beam Dynamics Simulations for a 15 MeV Superconducting Electron Linac Coupled to a DC Photo-Injector”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP069, pp. 236-238.
[n] K.-U. Kasemir and M. R. Pearson, “CS-Studio Scan System Parallelization”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 517-520. doi:10.18429/JACoW-ICALEPCS2015-TUA3O04
[n] S.-W. Jang et al., “Beam diagnostics status for the Korea 4GSR project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2389-2392. doi:10.18429/JACoW-IPAC2024-WEPG70
[n] Ch. Maurer, D. H. H. Hoffmann, L. H. J. Bozyk, H. Kollmus, and P. J. Spiller, “Heavy Ion Induced Desorption Measurements on Cryogenic Targets”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 867-869. doi:10.18429/JACoW-IPAC2014-MOPRI105
[n] E. Merle et al., “Progress with the 2-3 kA AIRIX Electron Beam”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE075, pp. 2649-2651.
[n] I. Colizzi et al., “Upgrade of a Clinical Facility to Achieve a High Transmission and Gantry Angle-Independent Flash Tune”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEBO05, pp. 191-195. doi:10.18429/JACoW-CYCLOTRONS2022-WEBO05
[n] D. L. Turner, R. Bachimanchi, A. Carpenter, J. Latshaw, C. Tennant, and L. S. Vidyaratne, “SRF Cavity Instability Detection with Machine Learning at CEBAF”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 669-671. doi:10.18429/JACoW-NAPAC2022-WEPA23
[n] N. Pichoff et al., “Contributors to AIRIX Focal Spot Size”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH107, pp. 2164-2166.
[n] V. Variale, M. Cavenago, and V. Valentino, “High beam energy recovery simulations for space charged based collector in Neutral beam injection application”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 973-975. doi:10.18429/JACoW-IPAC2023-MOPL185
[n] A. Makhankov et al., “An Accelerator-based Thermal Neutron Source for BNCT Application”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT111, pp. 2745-2747.
[n] A. Halavanau et al., “Development of X-ray laser oscillator”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG45, unpublished.
[n] K. Bongardt, H. Deitinghoff, M. Pabst, and G. Parisi, “Error Effects and Parameter Analysis for a HIDIF DTL”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP45G, pp. 1121-1123.
[n] B. Rachmilowitz et al., “Large-area atomic layer deposition of titanium nitride for RF windows”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB094, unpublished.
[n] D. Manglunki, “LEIR Operations for the LHC and Future Plans”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper MOPM2HA01, pp. 31-35.
[n] C. J. Liaw, R. Schroeder, and R. Sikora, “Study of the RHIC BPM SMA Connector Failure Problem”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS095, pp. 649-651.
[n] A. Bernhard, A. Ahl, S. Fatehi, B. Haerer, and J. Schaefer, “Compact quadrupole-sextupole magnet units for the FLUTE-cSTART injection line”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB027, unpublished.
[n] M. Canzari et al., “Improving Performance of Taranta: Analysis of Memory Requests and Implementation of the Solution”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 617-621. doi:10.18429/JACoW-ICALEPCS2023-TUPDP044
[n] P. Adamson et al., “Operational Performance of a Bunch by Bunch Digital Damper in the Fermilab Main Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP015, pp. 1440-1442.
[n] T. Friedrich and M. T?Ârngren, “Surveying Software Technology for Accelerator Control Systems”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOY03, pp. 16-18.
[n] J. Abraham, “Transient Wave Propagation in Linear Accelerators”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VI-08, pp. 337-343.
[n] H. Okuno et al., “New Developments in Low-Z Gas Stripper Sstem at RIKEN Radioactive Isotope Beam Factory (RIBF)”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper THB01, pp. 199-205.
[n] E. Merle et al., “Installation of the AIRIX Induction Accelerator”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4002, pp. 391-393.
[n] L. W. Lai, Z. C. Chen, Y. B. Leng, and Y. B. Yan, “An Intelligent Trigger Abnormal Beam Operation Monitoring Processor at the SSRF”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 978-980. doi:10.18429/JACoW-IPAC2015-MOPTY020
[n] H. Dzitko et al., “Operational Efficiency of the AIRIX Accelerator Since its Commissioning”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR025, pp. 4017-4019.
[n] A. Kasliwal, R. Banwari, S. Kotaiah, T. G. Pandit, and A. Upadhyay, “Utilizing Multiplier Stack's Reflected Parasitic Capacitance to Achieve ZVS Operation of Resonant Inverter for 750 keV DC Accelerator”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA036, pp. 677-678.
[n] W.-H. Hwang, S. H. Kim, H. S. Lee, S. H. Nam, and Y. J. Park, “Development of a New Waveguide Valve Using RF Choke Flange for PLS Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH309, pp. 1204-1206.
[n] D. Marcato et al., “Pysmlib: A Python Finite State Machine Library for EPICS”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 330-336. doi:10.18429/JACoW-ICALEPCS2021-TUBL05
[n] V. N. Litvinenko et al., “Commissioning of the Duke Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA08, pp. 213-215.
[n] O. Pierret, “AIRIX Diagnostic Devices for Focal Spot Size and Dose Measurements”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP072, pp. 560-560.
[n] D. Li, L. Cao, T. Hu, J. Huang, B. Qin, and J. Yang, “Design and Test of 10 kW RF Amplifier Based on Direct Digital Synthesizer”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP030, pp. 885-887.
[n] E. H. R. Gaxiola et al., “Upgrade and Tests of the SPS Fast Extraction Kicker System for LHC and CNGS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT016, pp. 566-568.
[n] A. G. Ruggiero, “Upgrade of BNL Accelerator Facility”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper MOBP03, pp. 29-33.
[n] J. Alessi et al., “The AGS H RFQ Preinjector”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-59, pp. 196-198.
[n] J. A. Uythoven et al., “Beam Induced Heating of the SPS Fast Pulsed Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT035, pp. 623-625.
[n] M. Schwarz, S. Glukhov, A.-S. Mueller, and J. Schaefer, “Impact of the cSTART impedance on beam dynamics”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPM080, unpublished.
[n] D. Einfeld, F. Anton, J. Hormes, and D. Husmann, “The Low Emittance 2.5 GeV Synchrotron Light Source LISA”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1693-1696.
[n] C. H. Patard et al., “SPIRAL2 Machine Protection System Status Report”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1652. doi:10.18429/JACoW-ICALEPCS2019-THCPR08
[n] D. Schulte et al., “CLIC Energy Scans”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE022, pp. 3395-3397.
[n] J. L. Conradie et al., “New Developments at iThemba LABS”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 274-277. doi:10.18429/JACoW-Cyclotrons2016-THA02
[n] S. Shin, J. Ko, J. H. Kim, and G. Ha, “Fabrication of THz corrugated structure using X-ray based lithography”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR12, unpublished.
[n] Y. Zhang, H. B. Chen, Q. Gao, and J. Shi, “THEORY RESEARCH ON APPLICATION OF CT TECHNOLOGY TO SHIELDED NUCLEAR MATERIAL DISCRIMINATION”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA019, pp. 3669-3671.
[n] D. Husmann, “Review of CW Electron Machines”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 62-67.
[n] J. L. Conradie et al., “Status Report and New Developments at iThemba LABS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT032, pp. 94-96.
[n] A. Adelmann et al., “OPAL and Future Directions Towards the Exascale Area”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA081, unpublished.
[n] M. J. Ferreira, R. O. Ferraz, F. A. Minuzzi, and M. B. Silva, “LNLS Vacuum System Commissioning”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P018, pp. 3628-3629.
[n] A. Lombardi, G. Parisi, and M. Vretenar, “Comparison Study of RFQ Structures for the Lead Ion Linac at CERN”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 557-560.
[n] A. Bonatto, R. Pakter, F. B. Rizzato, S. R. Lopes, C. Bonatto, and R. P. Nunes, “Nonparaxial Transverse Effects on the Propagation of Nonlinear Electromagnetic Pulses”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC01, pp. 81-83.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. P. Liu et al., “Cryogenic system for BEPCII superconducting cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP19, pp. XX-XX.
- H. O. C. Duarte, P. P. S. Freitas, A. R. D. Rodrigues, R. M. Seraphim, and T. M. da Rocha, “Design Review of Bellows RF-Shielding Types and New Concepts for Sirius”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 53-56.
- H. Frese and G. Hochweller, “The Serial Data Acquisition System at PETRA”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3385-3387.
- J. P. Edelen et al., “A Flexible EPICS Framework for Sample Alignment at Neutron Beamlines”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP113, pp. 836-840.
- R. Martini, M. Br?ñger, J. L. Salmon, and A. Suwalska, “Tools and Procedures for High Quality Technical Infrastructure Monitoring Reference Data at CERN”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1036-1039.
- N. Fuster-Martinez et al., “Aperture Measurements with AC Dipole at the Large Hadron Collider”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 212-215.
- L. Pivetta et al., “HDB++: A New Archiving System for TANGO”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 652-655.
- C.-M. Cheng et al., “The Issue with XBPM2 in the TPS Front End”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM073, this conference.
- L. H. Waites, J. M. Conrad, J. Smolsky, and D. Winklehner, “Matching of an RFQ and Multicusp Ion Source with Compact LEBT”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 546-549.
- I. V. Pogorelov et al., “Machine Learning Based Noise Reduction of Neutron Camera Images at ORNL”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP114, pp. 841-845.
- J. C. Chang, J. R. Chen, Y. C. Chung, C. Y. Liu, and Z. D. Tsai, “De-Ionized Cooling Water System Study and Improvement at TLS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG024, pp. 1479-1481.
- M. Di Carlo, M. Dolci, P. Harding, J. B. Morgado, B. Ribeiro, and U. Yilmaz, “CI-CD Practices at SKA”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 322-329.
- A. Regan, S. Kwon, M. Prokop, T. Rohlev, D. Thomson, and H. Ma, “The SNS Linac RF Control System”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH104, pp. 574-576.
- V. G. Vaccaro et al., “A New Tuning Module for Resonant Coupling Structures”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT005, pp. 973-975.
- L. G. Ratner, F. Hornstra, S. Marcowitz, N. Reay, T. Romanowski, and R. Sherr, “Simultaneous Multiple Targeting Techniques”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 170-172.
- Y. Z. Chen et al., “Beam Diagnostic at SDUV-FEL”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper FROA3, pp. 711-713.
- L. Sanfelici et al., “Carbon-Steel/poliethylene Radiation Enclosures for the Sirius Beamlines”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 223-225.
- T. Gutberlet, “Neutrons for Today and Tomorrow - the HBS Project for Compact Accelerator Based Neutron Sources”, presented at the 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, paper THXC04, unpublished.
- M. Bai, R. Calaga, F. Pilat, T. Satogata, F. Schmidt, and R. Tomas, “Measurement of Linear Coupling Resonance in RHIC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB073, pp. 2207-2209.
- G. Bezzon et al., “Construction and Commissioning of the RFQ for the CERN Lead-Ion Facility”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-12, pp. 722-724.
- J. Q. Li, “Production of intense carbon beams with permanent magnet ECR ion sources”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper FRT7AUCO24, unpublished.
- B. Bogdanovitch, V. Senioukov, A. Koroliov, and K. Simonov, “Application of Low Energy Electron Beams for Technology and Medicine”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP142, pp. 2570-2572.
- D. Guilhem, J.-L. Lemaire, and S. J. Pichon, “Beam Dynamics Simulations for a 15 MeV Superconducting Electron Linac Coupled to a DC Photo-Injector”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper MOP069, pp. 236-238.
- K.-U. Kasemir and M. R. Pearson, “CS-Studio Scan System Parallelization”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 517-520.
- S.-W. Jang et al., “Beam diagnostics status for the Korea 4GSR project”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG70, pp. 2389-2392.
- Ch. Maurer, D. H. H. Hoffmann, L. H. J. Bozyk, H. Kollmus, and P. J. Spiller, “Heavy Ion Induced Desorption Measurements on Cryogenic Targets”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 867-869.
- E. Merle et al., “Progress with the 2-3 kA AIRIX Electron Beam”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE075, pp. 2649-2651.
- I. Colizzi et al., “Upgrade of a Clinical Facility to Achieve a High Transmission and Gantry Angle-Independent Flash Tune”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEBO05, pp. 191-195.
- D. L. Turner, R. Bachimanchi, A. Carpenter, J. Latshaw, C. Tennant, and L. S. Vidyaratne, “SRF Cavity Instability Detection with Machine Learning at CEBAF”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 669-671.
- N. Pichoff et al., “Contributors to AIRIX Focal Spot Size”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH107, pp. 2164-2166.
- V. Variale, M. Cavenago, and V. Valentino, “High beam energy recovery simulations for space charged based collector in Neutral beam injection application”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL185, pp. 973-975.
- A. Makhankov et al., “An Accelerator-based Thermal Neutron Source for BNCT Application”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT111, pp. 2745-2747.
- A. Halavanau et al., “Development of X-ray laser oscillator”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG45, unpublished.
- K. Bongardt, H. Deitinghoff, M. Pabst, and G. Parisi, “Error Effects and Parameter Analysis for a HIDIF DTL”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP45G, pp. 1121-1123.
- B. Rachmilowitz et al., “Large-area atomic layer deposition of titanium nitride for RF windows”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB094, this conference.
- D. Manglunki, “LEIR Operations for the LHC and Future Plans”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper MOPM2HA01, pp. 31-35.
- C. J. Liaw, R. Schroeder, and R. Sikora, “Study of the RHIC BPM SMA Connector Failure Problem”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS095, pp. 649-651.
- A. Bernhard, A. Ahl, S. Fatehi, B. Haerer, and J. Schaefer, “Compact quadrupole-sextupole magnet units for the FLUTE-cSTART injection line”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB027, this conference.
- M. Canzari et al., “Improving Performance of Taranta: Analysis of Memory Requests and Implementation of the Solution”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP044, pp. 617-621.
- P. Adamson et al., “Operational Performance of a Bunch by Bunch Digital Damper in the Fermilab Main Injector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP015, pp. 1440-1442.
- T. Friedrich and M. T?Ârngren, “Surveying Software Technology for Accelerator Control Systems”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOY03, pp. 16-18.
- J. Abraham, “Transient Wave Propagation in Linear Accelerators”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper VI-08, pp. 337-343.
- H. Okuno et al., “New Developments in Low-Z Gas Stripper Sstem at RIKEN Radioactive Isotope Beam Factory (RIBF)”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper THB01, pp. 199-205.
- E. Merle et al., “Installation of the AIRIX Induction Accelerator”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4002, pp. 391-393.
- L. W. Lai, Z. C. Chen, Y. B. Leng, and Y. B. Yan, “An Intelligent Trigger Abnormal Beam Operation Monitoring Processor at the SSRF”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 978-980.
- H. Dzitko et al., “Operational Efficiency of the AIRIX Accelerator Since its Commissioning”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR025, pp. 4017-4019.
- A. Kasliwal, R. Banwari, S. Kotaiah, T. G. Pandit, and A. Upadhyay, “Utilizing Multiplier Stack's Reflected Parasitic Capacitance to Achieve ZVS Operation of Resonant Inverter for 750 keV DC Accelerator”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA036, pp. 677-678.
- W.-H. Hwang, S. H. Kim, H. S. Lee, S. H. Nam, and Y. J. Park, “Development of a New Waveguide Valve Using RF Choke Flange for PLS Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH309, pp. 1204-1206.
- D. Marcato et al., “Pysmlib: A Python Finite State Machine Library for EPICS”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 330-336.
- V. N. Litvinenko et al., “Commissioning of the Duke Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAA08, pp. 213-215.
- O. Pierret, “AIRIX Diagnostic Devices for Focal Spot Size and Dose Measurements”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP072, pp. 560-560.
- D. Li, L. Cao, T. Hu, J. Huang, B. Qin, and J. Yang, “Design and Test of 10 kW RF Amplifier Based on Direct Digital Synthesizer”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP030, pp. 885-887.
- E. H. R. Gaxiola et al., “Upgrade and Tests of the SPS Fast Extraction Kicker System for LHC and CNGS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT016, pp. 566-568.
- A. G. Ruggiero, “Upgrade of BNL Accelerator Facility”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper MOBP03, pp. 29-33.
- J. Alessi et al., “The AGS H RFQ Preinjector”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-59, pp. 196-198.
- J. A. Uythoven et al., “Beam Induced Heating of the SPS Fast Pulsed Magnets”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT035, pp. 623-625.
- M. Schwarz, S. Glukhov, A.-S. Mueller, and J. Schaefer, “Impact of the cSTART impedance on beam dynamics”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM080, this conference.
- D. Einfeld, F. Anton, J. Hormes, and D. Husmann, “The Low Emittance 2.5 GeV Synchrotron Light Source LISA”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1693-1696.
- C. H. Patard et al., “SPIRAL2 Machine Protection System Status Report”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1652.
- D. Schulte et al., “CLIC Energy Scans”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE022, pp. 3395-3397.
- J. L. Conradie et al., “New Developments at iThemba LABS”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 274-277.
- S. Shin, J. Ko, J. H. Kim, and G. Ha, “Fabrication of THz corrugated structure using X-ray based lithography”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR12, unpublished.
- Y. Zhang, H. B. Chen, Q. Gao, and J. Shi, “THEORY RESEARCH ON APPLICATION OF CT TECHNOLOGY TO SHIELDED NUCLEAR MATERIAL DISCRIMINATION”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA019, pp. 3669-3671.
- D. Husmann, “Review of CW Electron Machines”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 62-67.
- J. L. Conradie et al., “Status Report and New Developments at iThemba LABS”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT032, pp. 94-96.
- A. Adelmann et al., “OPAL and Future Directions Towards the Exascale Area”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA081, unpublished.
- M. J. Ferreira, R. O. Ferraz, F. A. Minuzzi, and M. B. Silva, “LNLS Vacuum System Commissioning”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P018, pp. 3628-3629.
- A. Lombardi, G. Parisi, and M. Vretenar, “Comparison Study of RFQ Structures for the Lead Ion Linac at CERN”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 557-560.
- A. Bonatto, R. Pakter, F. B. Rizzato, S. R. Lopes, C. Bonatto, and R. P. Nunes, “Nonparaxial Transverse Effects on the Propagation of Nonlinear Electromagnetic Pulses”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC01, pp. 81-83.
Back to search