Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] I. V. Leitao, C. Maglioni, and A. Sarri?? Mart?¡nez, “Conceptual Design of the Linac4 Main Dump”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR053, pp. 1939-1941.
[n] C. M. Zimmer, T. J. Maxwell, and F. Zhou, “LCLS-II Injector Commissioning Beam Based Measurements”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 157-159. doi:10.18429/JACoW-NAPAC2019-MOPLM24
[n] A. Aragona et al., “Measurement and Correction of the Closed Orbit in the Storage Ring Adone”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 608-611.
[n] C. Kondo, T. Inagaki, T. Sakurai, T. Shintake, and K. Shirasawa, “EMI Noise Suppression in the Klystron Pulse Power Supply for XFEL/SPring-8”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD059, pp. 3230-3232.
[n] S. R. Walther, C. M. McKenna, and B. O. Pedersen, “Ion Sources for Commercial Ion Implanter Applications”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2088-2093.
[n] E. Plouviez et al., “Cleaning of Parasitic Bunches for Time Structured Filling of the ESRF Storage Ring During Top Up Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1774-1777. doi:10.18429/JACoW-IPAC2017-TUPIK041
[n] K. Schulte-Urlichs et al., “Status of the electron lens for space charge compensation in SIS18”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2309-2312. doi:10.18429/JACoW-IPAC2023-TUPM052
[n] J. Coupard et al., “Schedule Evolution of the Linac4 Installation During the Lifetime of the Linac4 Project and Connection Forecast”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 794-797. doi:10.18429/JACoW-IPAC2018-TUPAF044
[n] H. Deitinghoff, H. Klein, and A. Schempp, “Calculations on Beam Formation with Two Coupled RFQs for the EHF Injection Scheme”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-15, pp. 76-78.
[n] G. Skripka, P. Dijkstal, G. Iadarola, L. Mether, G. Rumolo, and E. G. T. Wulff, “Comparison of Electron Cloud Build-Up Simulations Against Heat Load Measurements for the LHC Arcs With Different Beam Configurations”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3232-3235. doi:10.18429/JACoW-IPAC2019-WEPTS051
[n] X. Li et al., “Simulation Studies on the Saturated Emission at PITZ”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 444-447. doi:10.18429/JACoW-FEL2019-WEP052
[n] X. L. Fu, T. Au, K. Fong, and Q. Zheng, “TRIUMF LLRF Control System Upgrade”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper MOPO015, pp. 91-94. doi:10.18429/JACoW-CYCLOTRONS2022-MOPO015
[n] K. T. McDonald et al., “The MERIT High-Power Target Experiment at the CERN PS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU4GRI03, pp. 795-799.
[n] Y. Xie et al., “Demonstration of Coaxial Coupling Scheme at 26 MV/m for 1.3 GHz Tesla-Type SRF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB105, pp. 1397-1399.
[n] M. Ribeaudeau, P. Bosland, A. Chevarier, O. Guise, and P. Trouve, “RBS and NRS Analysis of Sputtered Nb Films Annealed at Different Temperatures”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D34, pp. 1110-1118.
[n] A. Bocci et al., “IR Photon Array Detector for Bunch by Bunch Transverse Beam Diagnostics”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB13, pp. 194-196.
[n] W. S. Wang et al., “Orbit Correction Study based on Simulation for Injector II”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 112-114. doi:10.18429/JACoW-SAP2017-MOPH35
[n] T. Asaka et al., “Stability Performance of the Injector for SACLA/XFEL at SPring-8”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB006, pp. 486-488.
[n] A. L. Healy, G. Burt, D. M. Graham, and S. P. Jamison, “Group Velocity Matching in Dielectric-Lined Waveguides and its Role in Electron-THz Interaction”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3296-3298. doi:10.18429/JACoW-IPAC2017-WEPVA019
[n] S. V. Kuzikov et al., “An X-Band Ultra-High Gradient Photoinjector”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2986-2989. doi:10.18429/JACoW-IPAC2021-WEPAB163
[n] X. J. Wang et al., “Experimental Results of the ATF In-line Injection System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPE11, pp. 890-892.
[n] T. G. Dzubay and R. E. Pollock, “A Multichannel Radiation Monitor with Logarithmic Response from 0.1 to 106 mrem/hr”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 586-588.
[n] B. Brajuskovic, J. T. Collins, P. K. Den Hartog, L. H. Morrison, and G. J. Waldschmidt, “Thermomechanical Design of Normal-Conducting Deflecting Cavities at the Advanced Photon Source for Short X-ray Pulse Generation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FROBC04, pp. 3827-3829.
[n] B. X. Yang, G. Decker, P. K. Den Hartog, and S.-H. Lee, “High-Power Hard X-ray Beam Position Monitor Development at the APS”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM043, pp. 233-237.
[n] D. A. Harder, G. Rakowsky, and J. Skaritka, “Magnetic Measurement System for the NSLS Superconducting Undulator Vertical Test Facility”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT021, pp. 1730-1732.
[n] V. S. Morozov, Y. S. Derbenev, J. Guo, A. Hutton, and Y. Zhang, “Study of Beam Synchronization at JLEIC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2463-2465. doi:10.18429/JACoW-IPAC2016-WEPMW019
[n] A. Aslam, M. Babzien, S. Biedron, and T. Bolin, “Applications of machine learning in ultrafast laser control”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1862-1864. doi:10.18429/JACoW-IPAC2024-TUPS77
[n] S. Wang, J. Guo, R. A. Rimmer, and H. Wang, “The New Design for Capture Cavity of CEBAF”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3955-3957. doi:10.18429/JACoW-IPAC2014-THPRI080
[n] V. Gostishchev, C. Dimopoulou, A. Dolinskii, F. Nolden, and M. Steck, “Internal Target Effects in the ESR Storage Ring with Cooling”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THAP20, pp. 210-212.
[n] G. Cuttone, D. Giove, and A. Rovelli, “Experience and Trends in Control System for Particl Accelerators”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1803-1806.
[n] J.-M. De Conto et al., “GENEPI-3C, a Versatile Neutron Generator for the GUINEVERE ADS Feasibility Studies”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP028, pp. 1348-1350.
[n] G. Huang, D. Jia, K. Jin, H. Lin, and Y. Liu, “Bunch-by-bunch Phase Modulation for Linac Beam-loading Compensation”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB021, pp. 216-218.
[n] M. A. Fraser et al., “Considerations on an Upgrade Possibility of the LHC Beam Dump Kicker System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3631-3633. doi:10.18429/JACoW-IPAC2016-THPMW035
[n] J. C. Billy et al., “The LEP Vacuum System: A Summary of 10 years of Successful Operation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B14, pp. 2286-2288.
[n] C. Ekdahl et al., “Electron Beam Dynamics in the Long-pulse, High-current DARHT-II Linear Induction Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUOBG03, pp. 968-970.
[n] P. Thieberger, D. M. Gassner, J. W. Glenn, M. G. Minty, and C. M. Zimmer, “Baseline Suppression Problems for High Precision Measurements Using Optical Beam Profile Monitors.”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP208, pp. 486-488.
[n] L. Brunetti et al., “Vibration Stabilization for a Cantilever Magnet Prototype at the Subnanometer Scale”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC115, pp. 1335-1337.
[n] C. J. Bocchetta et al., “ELETTRA Commissioning and Operation”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 579-582.
[n] H. Wang, J. Guo, R. A. Rimmer, and S. Wang, “Transient Beam Loading Effects in RF Systems in JLEIC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 518-521. doi:10.18429/JACoW-IPAC2016-MOPMY003
[n] E. N. Shaposhnikova, E. Ciapala, and E. Montesinos, “Upgrade of the 200 MHz RF System in the CERN SPS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC058, pp. 214-216.
[n] J. Frisch, E. Doyle, and K. Skarpaas VIII, “Advanced Collimator Engineering for the NLC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH012, pp. 1258-1260.
[n] W. Barth, A. Schempp, H. Deitinghoff, and J. Dehen, “Transport of Ions in RFQ-Accelerators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3142-3145.
[n] A. Dubrovskiy and F. Tecker, “RF Pulse Compression Stabilization at the CTF3 CLIC Test Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA043, pp. 3774-3776.
[n] Z. D. Farkas, “Beam Loading Compensation with Variable Group Velocity”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-40, pp. 410-412.
[n] N. Grouas et al., “Mechanical and Cryogenic System Design of the 1st Cryomodule for the IFMIF Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC054, pp. 582-584.
[n] Y. Dutheil et al., “Beam Transfer Line Design to the SPS Beam Dump Facility”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 751-753. doi:10.18429/JACoW-IPAC2018-TUPAF032
[n] A. J. Green, K. Zagar, L. Zambon, and M. Pelko, “Canone -- A Highly-Interactive Web-Based Control System Interface”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA20, pp. 129-131.
[n] A. Winter, W. J. Jalmuzna, F. Loehl, H. Schlarb, and P. Schmuser, “Status of the Laser Master Oscillator System at FLASH”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN020, pp. 191-193.
[n] S. Chouhan, D. A. Harder, G. Rakowsky, J. Skaritka, and T. Tanabe, “Research and Development of Variable Polarization Superconducting Undulator at the NSLS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAB010, pp. 734-736.
[n] D. W. Storey et al., “Performance of OTR and Scintillator View Screens for the ARIEL Electron Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 117-119. doi:10.18429/JACoW-IPAC2017-MOPAB021
[n] S. Simrock, W. Cichalewski, M. K. Grecki, G. W. Jablonski, and W. J. Jalmuzna, “Universal Controller for Digital RF Control”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH190, pp. 1459-1461.
[n] U. Iriso and W. Fischer, “Electron-impact Desorption at the RHIC Beam Pipes”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH134, pp. 360-362.
[n] D. Rifuggiato et al., “Operational Experience with the EXCYT Facility”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper MO-06, pp. 5-8.
[n] Y. Wang, M. Borland, and V. Sajaev, “Exploration of Parallel Optimization Techniques for Accelerator Design”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUODN2, pp. 787-789.
[n] D. R. Makowski, G. W. Jablonski, A. Napieralski, and P. Predki, “Low Latency Data Transmission in LLRF Systems”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP039, pp. 877-879.
[n] N. Golubeva, V. Balandin, R. Brinkmann, and W. Decking, “Third-Order Apochromatic Drift-Quadrupole Beamline”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC069, pp. 1329-1331.
[n] K. Chalut, V. N. Litvinenko, and V. Pinayev, “Novel Method for Phase-Space Tomography of Rapidly Evolving E-beams”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS53, pp. XX-XX.
[n] J.-L. Revol et al., “ESRF Upgrade Phase II Status”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 209-212. doi:10.18429/JACoW-IPAC2014-MOPRO055
[n] T. Semba et al., “Design and Manufacture of a Superconducting Solenoid for D-Line of J-PARC Muon Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1177-1179. doi:10.18429/JACoW-IPAC2016-TUPMB034
[n] R. L. Cassel and S. Hitchcock, “A New Type High Voltage Fast Rise/Fall Time Solid State Marx Pulse Modulator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOBC02, pp. 865-867.
[n] A. Winter and W. J. Jalmuzna, “Comparative Study of Digital and Analog Synchronization Techniques for Lasers in Accelerators”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH056, pp. 459-461.
[n] N. C. Shipman et al., “A Ferroelectric Fast Reactive Tuner for Superconducting Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 781-788. doi:10.18429/JACoW-SRF2019-WETEB7
[n] K. Zhou et al., “Commissioning of the 2x4-cell Superconducting Accelerator for the CAEP THz-FEL Facility”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 96-98. doi:10.18429/JACoW-SAP2017-MOPH30
For LaTeX
Use Complete Form
For BibTeX
References
- I. V. Leitao, C. Maglioni, and A. Sarri?? Mart?¡nez, “Conceptual Design of the Linac4 Main Dump”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR053, pp. 1939-1941.
- C. M. Zimmer, T. J. Maxwell, and F. Zhou, “LCLS-II Injector Commissioning Beam Based Measurements”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 157-159.
- A. Aragona et al., “Measurement and Correction of the Closed Orbit in the Storage Ring Adone”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 608-611.
- C. Kondo, T. Inagaki, T. Sakurai, T. Shintake, and K. Shirasawa, “EMI Noise Suppression in the Klystron Pulse Power Supply for XFEL/SPring-8”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD059, pp. 3230-3232.
- S. R. Walther, C. M. McKenna, and B. O. Pedersen, “Ion Sources for Commercial Ion Implanter Applications”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2088-2093.
- E. Plouviez et al., “Cleaning of Parasitic Bunches for Time Structured Filling of the ESRF Storage Ring During Top Up Operation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1774-1777.
- K. Schulte-Urlichs et al., “Status of the electron lens for space charge compensation in SIS18”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM052, pp. 2309-2312.
- J. Coupard et al., “Schedule Evolution of the Linac4 Installation During the Lifetime of the Linac4 Project and Connection Forecast”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 794-797.
- H. Deitinghoff, H. Klein, and A. Schempp, “Calculations on Beam Formation with Two Coupled RFQs for the EHF Injection Scheme”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-15, pp. 76-78.
- G. Skripka, P. Dijkstal, G. Iadarola, L. Mether, G. Rumolo, and E. G. T. Wulff, “Comparison of Electron Cloud Build-Up Simulations Against Heat Load Measurements for the LHC Arcs With Different Beam Configurations”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3232-3235.
- X. Li et al., “Simulation Studies on the Saturated Emission at PITZ”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 444-447.
- X. L. Fu, T. Au, K. Fong, and Q. Zheng, “TRIUMF LLRF Control System Upgrade”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper MOPO015, pp. 91-94.
- K. T. McDonald et al., “The MERIT High-Power Target Experiment at the CERN PS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU4GRI03, pp. 795-799.
- Y. Xie et al., “Demonstration of Coaxial Coupling Scheme at 26 MV/m for 1.3 GHz Tesla-Type SRF Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB105, pp. 1397-1399.
- M. Ribeaudeau, P. Bosland, A. Chevarier, O. Guise, and P. Trouve, “RBS and NRS Analysis of Sputtered Nb Films Annealed at Different Temperatures”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D34, pp. 1110-1118.
- A. Bocci et al., “IR Photon Array Detector for Bunch by Bunch Transverse Beam Diagnostics”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB13, pp. 194-196.
- W. S. Wang et al., “Orbit Correction Study based on Simulation for Injector II”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 112-114.
- T. Asaka et al., “Stability Performance of the Injector for SACLA/XFEL at SPring-8”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB006, pp. 486-488.
- A. L. Healy, G. Burt, D. M. Graham, and S. P. Jamison, “Group Velocity Matching in Dielectric-Lined Waveguides and its Role in Electron-THz Interaction”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3296-3298.
- S. V. Kuzikov et al., “An X-Band Ultra-High Gradient Photoinjector”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2986-2989.
- X. J. Wang et al., “Experimental Results of the ATF In-line Injection System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPE11, pp. 890-892.
- T. G. Dzubay and R. E. Pollock, “A Multichannel Radiation Monitor with Logarithmic Response from 0.1 to 106 mrem/hr”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 586-588.
- B. Brajuskovic, J. T. Collins, P. K. Den Hartog, L. H. Morrison, and G. J. Waldschmidt, “Thermomechanical Design of Normal-Conducting Deflecting Cavities at the Advanced Photon Source for Short X-ray Pulse Generation”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FROBC04, pp. 3827-3829.
- B. X. Yang, G. Decker, P. K. Den Hartog, and S.-H. Lee, “High-Power Hard X-ray Beam Position Monitor Development at the APS”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM043, pp. 233-237.
- D. A. Harder, G. Rakowsky, and J. Skaritka, “Magnetic Measurement System for the NSLS Superconducting Undulator Vertical Test Facility”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT021, pp. 1730-1732.
- V. S. Morozov, Y. S. Derbenev, J. Guo, A. Hutton, and Y. Zhang, “Study of Beam Synchronization at JLEIC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2463-2465.
- A. Aslam, M. Babzien, S. Biedron, and T. Bolin, “Applications of machine learning in ultrafast laser control”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS77, pp. 1862-1864.
- S. Wang, J. Guo, R. A. Rimmer, and H. Wang, “The New Design for Capture Cavity of CEBAF”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3955-3957.
- V. Gostishchev, C. Dimopoulou, A. Dolinskii, F. Nolden, and M. Steck, “Internal Target Effects in the ESR Storage Ring with Cooling”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper THAP20, pp. 210-212.
- G. Cuttone, D. Giove, and A. Rovelli, “Experience and Trends in Control System for Particl Accelerators”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1803-1806.
- J.-M. De Conto et al., “GENEPI-3C, a Versatile Neutron Generator for the GUINEVERE ADS Feasibility Studies”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP028, pp. 1348-1350.
- G. Huang, D. Jia, K. Jin, H. Lin, and Y. Liu, “Bunch-by-bunch Phase Modulation for Linac Beam-loading Compensation”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB021, pp. 216-218.
- M. A. Fraser et al., “Considerations on an Upgrade Possibility of the LHC Beam Dump Kicker System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3631-3633.
- J. C. Billy et al., “The LEP Vacuum System: A Summary of 10 years of Successful Operation”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B14, pp. 2286-2288.
- C. Ekdahl et al., “Electron Beam Dynamics in the Long-pulse, High-current DARHT-II Linear Induction Accelerator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUOBG03, pp. 968-970.
- P. Thieberger, D. M. Gassner, J. W. Glenn, M. G. Minty, and C. M. Zimmer, “Baseline Suppression Problems for High Precision Measurements Using Optical Beam Profile Monitors.”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP208, pp. 486-488.
- L. Brunetti et al., “Vibration Stabilization for a Cantilever Magnet Prototype at the Subnanometer Scale”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC115, pp. 1335-1337.
- C. J. Bocchetta et al., “ELETTRA Commissioning and Operation”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 579-582.
- H. Wang, J. Guo, R. A. Rimmer, and S. Wang, “Transient Beam Loading Effects in RF Systems in JLEIC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 518-521.
- E. N. Shaposhnikova, E. Ciapala, and E. Montesinos, “Upgrade of the 200 MHz RF System in the CERN SPS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC058, pp. 214-216.
- J. Frisch, E. Doyle, and K. Skarpaas VIII, “Advanced Collimator Engineering for the NLC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH012, pp. 1258-1260.
- W. Barth, A. Schempp, H. Deitinghoff, and J. Dehen, “Transport of Ions in RFQ-Accelerators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3142-3145.
- A. Dubrovskiy and F. Tecker, “RF Pulse Compression Stabilization at the CTF3 CLIC Test Facility”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA043, pp. 3774-3776.
- Z. D. Farkas, “Beam Loading Compensation with Variable Group Velocity”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-40, pp. 410-412.
- N. Grouas et al., “Mechanical and Cryogenic System Design of the 1st Cryomodule for the IFMIF Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC054, pp. 582-584.
- Y. Dutheil et al., “Beam Transfer Line Design to the SPS Beam Dump Facility”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 751-753.
- A. J. Green, K. Zagar, L. Zambon, and M. Pelko, “Canone -- A Highly-Interactive Web-Based Control System Interface”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA20, pp. 129-131.
- A. Winter, W. J. Jalmuzna, F. Loehl, H. Schlarb, and P. Schmuser, “Status of the Laser Master Oscillator System at FLASH”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN020, pp. 191-193.
- S. Chouhan, D. A. Harder, G. Rakowsky, J. Skaritka, and T. Tanabe, “Research and Development of Variable Polarization Superconducting Undulator at the NSLS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAB010, pp. 734-736.
- D. W. Storey et al., “Performance of OTR and Scintillator View Screens for the ARIEL Electron Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 117-119.
- S. Simrock, W. Cichalewski, M. K. Grecki, G. W. Jablonski, and W. J. Jalmuzna, “Universal Controller for Digital RF Control”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH190, pp. 1459-1461.
- U. Iriso and W. Fischer, “Electron-impact Desorption at the RHIC Beam Pipes”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH134, pp. 360-362.
- D. Rifuggiato et al., “Operational Experience with the EXCYT Facility”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper MO-06, pp. 5-8.
- Y. Wang, M. Borland, and V. Sajaev, “Exploration of Parallel Optimization Techniques for Accelerator Design”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUODN2, pp. 787-789.
- D. R. Makowski, G. W. Jablonski, A. Napieralski, and P. Predki, “Low Latency Data Transmission in LLRF Systems”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP039, pp. 877-879.
- N. Golubeva, V. Balandin, R. Brinkmann, and W. Decking, “Third-Order Apochromatic Drift-Quadrupole Beamline”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC069, pp. 1329-1331.
- K. Chalut, V. N. Litvinenko, and V. Pinayev, “Novel Method for Phase-Space Tomography of Rapidly Evolving E-beams”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS53, pp. XX-XX.
- J.-L. Revol et al., “ESRF Upgrade Phase II Status”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 209-212.
- T. Semba et al., “Design and Manufacture of a Superconducting Solenoid for D-Line of J-PARC Muon Facility”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1177-1179.
- R. L. Cassel and S. Hitchcock, “A New Type High Voltage Fast Rise/Fall Time Solid State Marx Pulse Modulator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOBC02, pp. 865-867.
- A. Winter and W. J. Jalmuzna, “Comparative Study of Digital and Analog Synchronization Techniques for Lasers in Accelerators”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH056, pp. 459-461.
- N. C. Shipman et al., “A Ferroelectric Fast Reactive Tuner for Superconducting Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 781-788.
- K. Zhou et al., “Commissioning of the 2x4-cell Superconducting Accelerator for the CAEP THz-FEL Facility”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 96-98.
Back to search