Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Ciavola et al., “Recent Improvements of the SERSE Project”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1421-1424.
[n] O. I. Meshkov et al., “Recent Results From New Station for Optical Observation of Electron Beam Parameters at KCSR Storage Ring”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 508-511. doi:10.18429/JACoW-IBIC2016-TUPG67
[n] M. Meidlinger et al., “First test results of half-reentrant single-cell superconducting cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WE206, pp. XX-XX.
[n] B. Forgacs and X. Rao, “Design automation of pre-separator wedges for FRIB advanced rare isotope separator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3549-3551. doi:10.18429/JACoW-IPAC2024-THPR25
[n] C. H. Wang and L. F. Li, “A New Data Acquiring and Query System with Oracle and EPICS in the BEPCII”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 865-868. doi:10.18429/JACoW-ICALEPCS2015-WEPGF070
[n] N. Carmignani et al., “Vertical beam halo characterisation at the ESRF EBS for operation with reduced in vacuum undulator gap”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 973-976. doi:10.18429/JACoW-IPAC2024-TUCN1
[n] J. Mann and J. Rosenzweig, “Framework for a multiphysics model of optical field emission from extended nanostructures”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 664-667. doi:10.18429/JACoW-IPAC2024-MOPR89
[n] W. Praeg and D. McGhee, “Power Supplies for the Ring Magnets of the Synchrotron X-Ray Source at ANL”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1526-1529.
[n] I. Hofmann, K. Beckert, S. Cocher, and U. Schaaf, “Diagnostics and Instability Studies of Cooled Ion Beams”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 229-234.
[n] C. D. Marshall et al., “National Ignition Facility Control and Information System Operational Tools”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUA003, pp. 52-54.
[n] S. Seletskiy and N. Solyak, “Design of the ILC RTML Extraction Lines for the Renovated Two-stage Bunch Compressor”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA12, pp. 550-552.
[n] B. Quinn et al., “Design and Testing of a Fast Beam Position Monitor”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB073, pp. 2571-2573.
[n] K. Bongardt, A. Letchford, and M. Pabst, “Progress on Intense Proton Beam Dynamics and Halo Formation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUY01B, pp. 146-150.
[n] E. Zaplatin, R. Eichhorn, F. M. Esser, B. Laatsch, and R. Stassen, “COSY SC HWR Investigations”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP45, pp. 437-441.
[n] E. Koukovini-Platia, H. Bartosik, M. Migliorati, and G. Rumolo, “High Intensity Effects of Fixed Target Beams in the CERN Injector Complex”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 237-242. doi:10.18429/JACoW-HB2018-WEA2WA01
[n] L. G. Sukhikh, G. Kube, A. Potylitsyn, and V. Schlott, “Coherent Resonant Diffraction Radiation from Inclined Grating as a Tool for Bunch Length Diagnostics”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD33, pp. 377-379.
[n] T. Juerges and A. Dange, “The SKAO Engineering Data Archive: From Basic Design to Prototype Deployments in Kubernetes”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1590-1593. doi:10.18429/JACoW-ICALEPCS2023-THSDSC05
[n] E. Fol, C. T. Rogers, J. Schieck, D. Schulte, and B. Stechauner, “Automated Design and Optimization of the Final Cooling for a Muon Collider”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2358-2361. doi:10.18429/JACoW-IPAC2022-WEPOMS047
[n] A. E. Bondarchenko et al., “Production of Intense Metal Ion Beams From ECR Ion Sources Using the MIVOC Method”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 330-332. doi:10.18429/JACoW-RUPAC2016-TUPSA059
For LaTeX
Use Complete Form
For BibTeX
References
- G. Ciavola et al., “Recent Improvements of the SERSE Project”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1421-1424.
- O. I. Meshkov et al., “Recent Results From New Station for Optical Observation of Electron Beam Parameters at KCSR Storage Ring”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 508-511.
- M. Meidlinger et al., “First test results of half-reentrant single-cell superconducting cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WE206, pp. XX-XX.
- B. Forgacs and X. Rao, “Design automation of pre-separator wedges for FRIB advanced rare isotope separator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR25, pp. 3549-3551.
- C. H. Wang and L. F. Li, “A New Data Acquiring and Query System with Oracle and EPICS in the BEPCII”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 865-868.
- N. Carmignani et al., “Vertical beam halo characterisation at the ESRF EBS for operation with reduced in vacuum undulator gap”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUCN1, pp. 973-976.
- J. Mann and J. Rosenzweig, “Framework for a multiphysics model of optical field emission from extended nanostructures”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR89, pp. 664-667.
- W. Praeg and D. McGhee, “Power Supplies for the Ring Magnets of the Synchrotron X-Ray Source at ANL”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1526-1529.
- I. Hofmann, K. Beckert, S. Cocher, and U. Schaaf, “Diagnostics and Instability Studies of Cooled Ion Beams”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 229-234.
- C. D. Marshall et al., “National Ignition Facility Control and Information System Operational Tools”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUA003, pp. 52-54.
- S. Seletskiy and N. Solyak, “Design of the ILC RTML Extraction Lines for the Renovated Two-stage Bunch Compressor”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA12, pp. 550-552.
- B. Quinn et al., “Design and Testing of a Fast Beam Position Monitor”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB073, pp. 2571-2573.
- K. Bongardt, A. Letchford, and M. Pabst, “Progress on Intense Proton Beam Dynamics and Halo Formation”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUY01B, pp. 146-150.
- E. Zaplatin, R. Eichhorn, F. M. Esser, B. Laatsch, and R. Stassen, “COSY SC HWR Investigations”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP45, pp. 437-441.
- E. Koukovini-Platia, H. Bartosik, M. Migliorati, and G. Rumolo, “High Intensity Effects of Fixed Target Beams in the CERN Injector Complex”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 237-242.
- L. G. Sukhikh, G. Kube, A. Potylitsyn, and V. Schlott, “Coherent Resonant Diffraction Radiation from Inclined Grating as a Tool for Bunch Length Diagnostics”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD33, pp. 377-379.
- T. Juerges and A. Dange, “The SKAO Engineering Data Archive: From Basic Design to Prototype Deployments in Kubernetes”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THSDSC05, pp. 1590-1593.
- E. Fol, C. T. Rogers, J. Schieck, D. Schulte, and B. Stechauner, “Automated Design and Optimization of the Final Cooling for a Muon Collider”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2358-2361.
- A. E. Bondarchenko et al., “Production of Intense Metal Ion Beams From ECR Ion Sources Using the MIVOC Method”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 330-332.
Back to search