Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. J. Gee and B. Erdelyi, “A Differential Algebraic Framework for the Fast Indirect Boundary Element Method”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3107-3109. doi:10.18429/JACoW-IPAC2016-WEPOY050
[n] M. L. Neubauer et al., “Injection Locked 1497 MHz Magnetron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4322-4324. doi:10.18429/JACoW-IPAC2019-THPTS090
[n] S. J. Payne, P. G. Barnes, G. M. Cross, A. Pertica, and S. A. Whitehead, “A Self Calibrating Real Time Multi-Channel Profile Monitor for the Isis Proton Synchrotron”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC24, pp. 364-366.
[n] Q. Kerns, S. Childress, C. Crawford, R. Fuja, and R. Janes, “Tuned Beam Position Detector for the Fermilab Switchyard”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 661-664.
[n] C.-J. Jing et al., “A 26 GHz Dielectric Based Wakefield Power Extractor”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP060, pp. 2930-2932.
[n] A. Halavanau, A. I. Benediktovitch, C. Pellegrini, N. Rohringer, and J. Wu, “Preliminary Considerations of Atomic Inner-Shell X-Ray Laser for Self-Seeding at LCLS-II”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1871-1874. doi:10.18429/JACoW-IPAC2019-TUPRB090
[n] A. Nadji et al., “Progress Report of SESAME Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEOARA02, pp. 2424-2426.
[n] F. Amman, E. D. Courant, and A. M. Sessler, “DISCUSSION: Effect of RF Noise on Beam”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 853-854.
[n] S. Chouksey, S. Krishnagopal, V. Kumar, S. Lal, K. K. Pant, and V. Prasad, “Mechanical Engineering Challenges in the Development of the FEL at RRCAT”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA111, pp. 479-481.
[n] F. Z. Hsiao, T. Y. Huang, C. P. Liu, and H. H. Tsai, “Design of a Helium Phase Separator with Condenser”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP216, pp. 1214-1216.
[n] W. Qin et al., “Free-Electron Laser Driven by a 500 MeV Laser Plasma Accelerator Beam”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 217-220. doi:10.18429/JACoW-FEL2015-MOP076
[n] J. Stovall, R. Shafer, and K. Crandall, “Longitudinal Tune-Up of SNS Normal Conducting Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU427, pp. 368-370.
[n] M. Rescic and Z. Kroflic, “CCCP - Cosylab common control platform”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL031, pp. 88-90.
[n] J. Reich, R. Brings, J. Linz, and P. Wucherer, “Beam Quality Improvement at JULIC”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-13, pp. 2007-2011.
[n] K. Harada, Y. Kobayashi, N. Nakamura, K. Oide, H. Sakai, and S. Sakanaka, “The Low Emittance Reconstruction of the Arc Section of the Photon Factory”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2874-2876. doi:10.18429/JACoW-IPAC2016-WEPOW021
[n] R. Sundelin, “What did we learn from Storage Ring Tests?”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-14, pp. XX-XX.
[n] A. Schnase, H. Meuth, and H. Halling, “Possibilities and Limitations for a Fully Digital RF Signal Synthesis and Control”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1253-1256.
[n] K.-U. Kasemir and M. R. Pearson, “CS-Studio Scan System Parallelization”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 517-520. doi:10.18429/JACoW-ICALEPCS2015-TUA3O04
[n] S. Leontein and E. Westlin, “Destructive Beam Profile Monitor Electronics using Gated Current Integrators”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP10E, pp. 1550-1552.
[n] S. A. Perezhogin et al., “The Bunching System Based on the Evanescent Oscillations”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE029, pp. 1605-1607.
[n] Y. Jongen and G. Ryckewaert, “The Louvain-la-Neuve Injector Cyclotron Project”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-09, pp. 618-621.
[n] Y. Jaski, “Closing Remarks”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper THCL01, pp. XX-XX.
[n] J. Kemppinen, Z. S. Kostka, and H. Mainaud Durand, “Cam Mover Alignment System Positioning with Wire Position Sensor Feedback for CLIC”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 32-34. doi:10.18429/JACoW-MEDSI2016-MOPE15
For LaTeX
Use Complete Form
For BibTeX
References
- A. J. Gee and B. Erdelyi, “A Differential Algebraic Framework for the Fast Indirect Boundary Element Method”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3107-3109.
- M. L. Neubauer et al., “Injection Locked 1497 MHz Magnetron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4322-4324.
- S. J. Payne, P. G. Barnes, G. M. Cross, A. Pertica, and S. A. Whitehead, “A Self Calibrating Real Time Multi-Channel Profile Monitor for the Isis Proton Synchrotron”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC24, pp. 364-366.
- Q. Kerns, S. Childress, C. Crawford, R. Fuja, and R. Janes, “Tuned Beam Position Detector for the Fermilab Switchyard”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 661-664.
- C.-J. Jing et al., “A 26 GHz Dielectric Based Wakefield Power Extractor”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP060, pp. 2930-2932.
- A. Halavanau, A. I. Benediktovitch, C. Pellegrini, N. Rohringer, and J. Wu, “Preliminary Considerations of Atomic Inner-Shell X-Ray Laser for Self-Seeding at LCLS-II”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1871-1874.
- A. Nadji et al., “Progress Report of SESAME Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEOARA02, pp. 2424-2426.
- F. Amman, E. D. Courant, and A. M. Sessler, “DISCUSSION: Effect of RF Noise on Beam”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 853-854.
- S. Chouksey, S. Krishnagopal, V. Kumar, S. Lal, K. K. Pant, and V. Prasad, “Mechanical Engineering Challenges in the Development of the FEL at RRCAT”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA111, pp. 479-481.
- F. Z. Hsiao, T. Y. Huang, C. P. Liu, and H. H. Tsai, “Design of a Helium Phase Separator with Condenser”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP216, pp. 1214-1216.
- W. Qin et al., “Free-Electron Laser Driven by a 500 MeV Laser Plasma Accelerator Beam”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 217-220.
- J. Stovall, R. Shafer, and K. Crandall, “Longitudinal Tune-Up of SNS Normal Conducting Linac”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU427, pp. 368-370.
- M. Rescic and Z. Kroflic, “CCCP - Cosylab common control platform”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL031, pp. 88-90.
- J. Reich, R. Brings, J. Linz, and P. Wucherer, “Beam Quality Improvement at JULIC”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper B-13, pp. 2007-2011.
- K. Harada, Y. Kobayashi, N. Nakamura, K. Oide, H. Sakai, and S. Sakanaka, “The Low Emittance Reconstruction of the Arc Section of the Photon Factory”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2874-2876.
- R. Sundelin, “What did we learn from Storage Ring Tests?”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-14, pp. XX-XX.
- A. Schnase, H. Meuth, and H. Halling, “Possibilities and Limitations for a Fully Digital RF Signal Synthesis and Control”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1253-1256.
- K.-U. Kasemir and M. R. Pearson, “CS-Studio Scan System Parallelization”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 517-520.
- S. Leontein and E. Westlin, “Destructive Beam Profile Monitor Electronics using Gated Current Integrators”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP10E, pp. 1550-1552.
- S. A. Perezhogin et al., “The Bunching System Based on the Evanescent Oscillations”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPE029, pp. 1605-1607.
- Y. Jongen and G. Ryckewaert, “The Louvain-la-Neuve Injector Cyclotron Project”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-09, pp. 618-621.
- Y. Jaski, “Closing Remarks”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper THCL01, pp. XX-XX.
- J. Kemppinen, Z. S. Kostka, and H. Mainaud Durand, “Cam Mover Alignment System Positioning with Wire Position Sensor Feedback for CLIC”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 32-34.
Back to search