Warning
Some papers have malformed authors, please correct this before using these references.
Favourites
For Word
[n] R. Gluckstern, F. Neri, and R. Cooper, “Beam Breakup with Coupling between Cavities”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-22, pp. 362-364.
[n] Y. Orlov, “Equivalent Equations and Incoherent Lifetime Calculated from ee- Beam-Beam Simulation”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3488-3491.
[n] H. Witte, J. S. Berg, and M. L. Lopes, “Progress on the Dipole Magnet for a Rapid Cycling Synchrotron”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1322-1324. doi:10.18429/JACoW-IPAC2014-TUPRO115
[n] A. G. Sosa et al., “Status of Testing and Commissioning of the Medium Energy Beam Transport Line of the ESS Normal Conducting Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 376-379. doi:10.18429/JACoW-LINAC2022-TUPOJO14
[n] K. Endo et al., “Slow Extraction from KEK-PS Main Ring”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3170-3173.
[n] A. W. Chao and H. Henke, “Wake Field and the Diffraction Model Due to a Flat Beam Moving Past a Conducting Wedge”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAB11, pp. 3043-3045.
[n] E. Syresin et al., “Project of Demonstration Center of the Proton Therapy at DLNP JINR”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB31, pp. 228-230.
[n] N. Pogue, T. L. Houck, and B. R. Poole, “Using Drive Rods in Inductions Cells to Reduce the Beam Break Up Instability”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4658-4661. doi:10.18429/JACoW-IPAC2018-THPML006
[n] M. Olveg?Ñrd et al., “Spectrometry in the Test Beam Line at CTF3”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE060, pp. 1113-1115.
[n] A. N. Artemiev et al., “An Ionization Detector of Synchrotron Beam Spatial Parameters: Possible Applications”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP21H, pp. 1535-1537.
[n] S. S. Tomic, P. Belicev, N. Neskovic, and E. V. Samsonov, “Ion Beam Dynamics in the Acceleration Region of the VINCY Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-25, pp. 540-543.
[n] E. Schuster, C. K. Allen, and M. Krstic, “Optimized Beam Matching Using Extremum Seeking”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT092, pp. 4269-4271.
[n] H. Zimmermann et al., “Experiments with the Two-Beam Funneling RFQ”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THDL6, pp. 530-532.
[n] S. K. Esin et al., “Commissioning of New Injection Line at INR Proton Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA74, pp. 3561-3563.
[n] B. N. Lee, J.-S. Chai, H. W. Kim, J. H. Oh, and H. S. Song, “Design study of Electromagnet for 13MeV PET Cyclotron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO011, pp. 2415-2417.
[n] P. Proudlock and H. W. Isch, “The Power Converters for the RF Klystrons of LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1209-1212.
[n] J-P. Airiau, V. Denis, H. Durandeau, P. Fourtillan, N. Loustalet, and P. Torrent, “Laser Megajoule Facility Operating Software Overview”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 104-107. doi:10.18429/JACoW-ICALEPCS2021-MOPV003
[n] R. E. Laxdal, T. Batten, and R. Beauregard, “Overview of Canadian Accelerators”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper MO1I01, unpublished.
[n] E. Fortescue, I. Kozsar, and V. Schramm, “Life Cycle Management and Reliability Analysis of Controls Hardware Using Operational Data From EAM”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 758-761. doi:10.18429/JACoW-ICALEPCS2023-TUPDP092
[n] F. Hornstra, A. Brescia, M. Knott, and C. Swoboda, “On-Line Computer Monitoring and Optimization of a Multiple Target Proton Beam Line”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 823-827.
[n] F. P. Blackstein, “Acceptance Calculations for Accelerator Beam Lines”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper E-6, pp. 357-363.
[n] R. D. Kohaupt, “Feedback Systems at DESY”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOY02A, pp. 180-181.
[n] M. Cavenago, T. Kulevoy, V. Stolbunov, and A. Vassiliev, “Installation and Operation of an ECR Ion Source and its Platform in Legnaro”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP035L, pp. 1487-1489.
[n] B. Aune, J. Leroy, and A. Mosnier, “Transient Beam Loading Calculations and Experiment at the Saclay Electron Linac”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2995-2998.
[n] A. Misra and P. Y. Nabhiraj, “Design and Development of Novel Waveguide Break for 14.45 GHz ECR Ion Source at VECC.”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper THT5AUCO14, unpublished.
[n] E. S. McCrory, “Monte Carlo of Tevatron Operations, Including the Recycler”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP037, pp. 2479-2481.
[n] G. Jug, M. Cargnelutti, and K. B. Scheidt, “Development of Compact Electronics Dedicated to Beam Position Monitors in Injectors and Boosters”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC18, pp. 713-715.
[n] S. Bettoni, J. Kallestrup, M. Böge, and R. Boiger, “Machine learning for orbit steering in synchrotrons”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 977-980. doi:10.18429/JACoW-IPAC2024-TUCN2
[n] A. K. Orduz, M. Di Giacomo, R. Ferdinand, J.-M. Lagniel, G. Normand, and D. U. Uriot, “Deuteron Beam Power Ramp-Up at SPIRAL2”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 70-73. doi:10.18429/JACoW-IPAC2022-MOPOST010
[n] A. Xiao, M. Abliz, and M. Borland, “Simulation Study With Septum Field Map for the APS Upgrade”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 116-119. doi:10.18429/JACoW-NAPAC2019-MOPLM10
[n] K. V. Nagesh, “Theoretical Analysis of the Recovery Times in Low Pressure Sparkgaps - Positive Ion Diffusion Method”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA065, pp. 723-725.
[n] Y. F. Liu, Z. H. Chen, M. Gu, Y. Wu, Q. Yuan, and X. X. Zhou, “Design a High Power Pulse Transformer for C-band Klystron Modulator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3875-3877. doi:10.18429/JACoW-IPAC2018-THPAL102
[n] Kh. S. Sarhadi et al., “Conceptual Design of ILSF RF System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI012, pp. 2723-2725.
[n] C. S. Park, “Compact Accelerator-Based EUV Source Development Using Laser Compton Scattering”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL179, unpublished.
[n] J.-L. Bol et al., “Operational Experience with the 500 /umA H- Isotope Production Cyclotron Cyclone 30”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1488-1491.
[n] P. H??lsmann, H. Klein, M. Kurz, and A. Schempp, “Damping of Higher-Order Modes in Electron Linacs”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU408, pp. 318-320.
[n] W. Busse et al., “Can We Make a Control System Do What the Operator Wants?”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper H-01, pp. 548-554.
[n] S. A. Pande, J. H. Han, H. C. Huang, M. P. Cox, and D. Brice, “S-Band Photocathode Gun with a 1 kHz Repetition Rate”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP104, pp. 974-976.
[n] J. E. Clendenin, M. J. Browne, R. A. Gearhart, J. C. Sheppard, and J. Sodja, “Timing Stabilization for the SLC Electron Source”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 369-372.
[n] A. A. Fateev, E. V. Gorbachev, and N. I. Lebedev, “The Power Supply System of Electrostatic Deflecting Plates for Accelerating Complex NICA”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUPSA34, pp. 108-109.
[n] S. H. Kim, K. Kim, K. M. Thompson, and L. R. Turner, “Design and Tests of the Injector Synchrotron Magnets for the 7-GeV Advanced Photon Source”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2808-2811.
[n] E. Al-dmour et al., “Vacuum System Design for the MAX IV 3 GeV Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS016, pp. 1554-1556.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Gluckstern, F. Neri, and R. Cooper, “Beam Breakup with Coupling between Cavities”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-22, pp. 362-364.
- Y. Orlov, “Equivalent Equations and Incoherent Lifetime Calculated from ee- Beam-Beam Simulation”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3488-3491.
- H. Witte, J. S. Berg, and M. L. Lopes, “Progress on the Dipole Magnet for a Rapid Cycling Synchrotron”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1322-1324.
- A. G. Sosa et al., “Status of Testing and Commissioning of the Medium Energy Beam Transport Line of the ESS Normal Conducting Linac”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 376-379.
- K. Endo et al., “Slow Extraction from KEK-PS Main Ring”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3170-3173.
- A. W. Chao and H. Henke, “Wake Field and the Diffraction Model Due to a Flat Beam Moving Past a Conducting Wedge”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAB11, pp. 3043-3045.
- E. Syresin et al., “Project of Demonstration Center of the Proton Therapy at DLNP JINR”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB31, pp. 228-230.
- N. Pogue, T. L. Houck, and B. R. Poole, “Using Drive Rods in Inductions Cells to Reduce the Beam Break Up Instability”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4658-4661.
- M. Olveg?Ñrd et al., “Spectrometry in the Test Beam Line at CTF3”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE060, pp. 1113-1115.
- A. N. Artemiev et al., “An Ionization Detector of Synchrotron Beam Spatial Parameters: Possible Applications”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP21H, pp. 1535-1537.
- S. S. Tomic, P. Belicev, N. Neskovic, and E. V. Samsonov, “Ion Beam Dynamics in the Acceleration Region of the VINCY Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-25, pp. 540-543.
- E. Schuster, C. K. Allen, and M. Krstic, “Optimized Beam Matching Using Extremum Seeking”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT092, pp. 4269-4271.
- H. Zimmermann et al., “Experiments with the Two-Beam Funneling RFQ”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THDL6, pp. 530-532.
- S. K. Esin et al., “Commissioning of New Injection Line at INR Proton Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA74, pp. 3561-3563.
- B. N. Lee, J.-S. Chai, H. W. Kim, J. H. Oh, and H. S. Song, “Design study of Electromagnet for 13MeV PET Cyclotron”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPO011, pp. 2415-2417.
- P. Proudlock and H. W. Isch, “The Power Converters for the RF Klystrons of LEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1209-1212.
- J-P. Airiau, V. Denis, H. Durandeau, P. Fourtillan, N. Loustalet, and P. Torrent, “Laser Megajoule Facility Operating Software Overview”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 104-107.
- R. E. Laxdal, T. Batten, and R. Beauregard, “Overview of Canadian Accelerators”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MO1I01, unpublished.
- E. Fortescue, I. Kozsar, and V. Schramm, “Life Cycle Management and Reliability Analysis of Controls Hardware Using Operational Data From EAM”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP092, pp. 758-761.
- F. Hornstra, A. Brescia, M. Knott, and C. Swoboda, “On-Line Computer Monitoring and Optimization of a Multiple Target Proton Beam Line”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 823-827.
- F. P. Blackstein, “Acceptance Calculations for Accelerator Beam Lines”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper E-6, pp. 357-363.
- R. D. Kohaupt, “Feedback Systems at DESY”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOY02A, pp. 180-181.
- M. Cavenago, T. Kulevoy, V. Stolbunov, and A. Vassiliev, “Installation and Operation of an ECR Ion Source and its Platform in Legnaro”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP035L, pp. 1487-1489.
- B. Aune, J. Leroy, and A. Mosnier, “Transient Beam Loading Calculations and Experiment at the Saclay Electron Linac”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2995-2998.
- A. Misra and P. Y. Nabhiraj, “Design and Development of Novel Waveguide Break for 14.45 GHz ECR Ion Source at VECC.”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper THT5AUCO14, unpublished.
- E. S. McCrory, “Monte Carlo of Tevatron Operations, Including the Recycler”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP037, pp. 2479-2481.
- G. Jug, M. Cargnelutti, and K. B. Scheidt, “Development of Compact Electronics Dedicated to Beam Position Monitors in Injectors and Boosters”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC18, pp. 713-715.
- S. Bettoni, J. Kallestrup, M. Böge, and R. Boiger, “Machine learning for orbit steering in synchrotrons”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUCN2, pp. 977-980.
- A. K. Orduz, M. Di Giacomo, R. Ferdinand, J.-M. Lagniel, G. Normand, and D. U. Uriot, “Deuteron Beam Power Ramp-Up at SPIRAL2”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 70-73.
- A. Xiao, M. Abliz, and M. Borland, “Simulation Study With Septum Field Map for the APS Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 116-119.
- K. V. Nagesh, “Theoretical Analysis of the Recovery Times in Low Pressure Sparkgaps - Positive Ion Diffusion Method”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA065, pp. 723-725.
- Y. F. Liu, Z. H. Chen, M. Gu, Y. Wu, Q. Yuan, and X. X. Zhou, “Design a High Power Pulse Transformer for C-band Klystron Modulator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3875-3877.
- Kh. S. Sarhadi et al., “Conceptual Design of ILSF RF System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI012, pp. 2723-2725.
- C. S. Park, “Compact Accelerator-Based EUV Source Development Using Laser Compton Scattering”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL179, unpublished.
- J.-L. Bol et al., “Operational Experience with the 500 /umA H- Isotope Production Cyclotron Cyclone 30”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1488-1491.
- P. H??lsmann, H. Klein, M. Kurz, and A. Schempp, “Damping of Higher-Order Modes in Electron Linacs”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU408, pp. 318-320.
- W. Busse et al., “Can We Make a Control System Do What the Operator Wants?”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper H-01, pp. 548-554.
- S. A. Pande, J. H. Han, H. C. Huang, M. P. Cox, and D. Brice, “S-Band Photocathode Gun with a 1 kHz Repetition Rate”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP104, pp. 974-976.
- J. E. Clendenin, M. J. Browne, R. A. Gearhart, J. C. Sheppard, and J. Sodja, “Timing Stabilization for the SLC Electron Source”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 369-372.
- A. A. Fateev, E. V. Gorbachev, and N. I. Lebedev, “The Power Supply System of Electrostatic Deflecting Plates for Accelerating Complex NICA”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper TUPSA34, pp. 108-109.
- S. H. Kim, K. Kim, K. M. Thompson, and L. R. Turner, “Design and Tests of the Injector Synchrotron Magnets for the 7-GeV Advanced Photon Source”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2808-2811.
- E. Al-dmour et al., “Vacuum System Design for the MAX IV 3 GeV Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS016, pp. 1554-1556.
Back to search