Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Mazzitelli, B. Buonomo, L. Quintieri, and P. Valente, “The DAFNE Beam Test Facility: from 1 to 10 Milliards of Particles”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS121, pp. 846-848.
[n] B. Frammery, “The LHC Control System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper I1_001.
[n] D. A. Malyutin, A. A. Starostenko, and D. Bolkhovityanov, “Use of a Three-Layer Control System for Non-Destructive Beam Probe Monitor”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA15, pp. 345-347.
[n] K. Furukawa et al., “Beam Feedback System Challenges at SuperKEKB Injector Linac”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOBAB04, pp. 1497-1500.
[n] P. W. Schmor, “New Achievements At Triumf And Future Plans”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 93-98.
[n] P. W. Schmor, “A Review of Polarized Ion Sources”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPE01, pp. 853-857.
[n] M. C. Ross, J. Nelson, M. Woodley, and A. Wolski, “Beam Based Alignment at the KEK Accelerator Test Facility”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI030, pp. 431-433.
[n] N. Steinhau-Kuehl, T. Eidtner, C. Hartmann, B. Henkel, and A. Matheisen, “Update on Quality Control of the Electro-Polishing Acid”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO081, pp. 811-813.
[n] J. L. Coleman, S. V. Benson, R. Evans, A. G. Grippo, and K. Jordan, “Laser Safety System for the IR Upgrade FEL at Jefferson Lab”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP069, pp. XX-XX.
[n] K. Haghighi mood and M. Aslaninejad, “2D Potential for an Elliptical Charge Distribution”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP073, pp. 4479-4481.
[n] D. J. Dunning, L. S. Cowie, and J. K. Jones, “XARA: X-Band Accelerator for Research and Applications”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 715-718. doi:10.18429/JACoW-FEL2019-THP066
[n] Q. Wu and I. Ben-Zvi, “Simulation of the High-Pass Filter for 56 MHz Cavity for RHIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC085, pp. 3078-3080.
[n] S. Bousson, “Advances in Superconducting RF Cavity Stiffening by Thermal Spraying”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper THA003, pp. 542-549.
[n] S. Kurashima, I. Ishibori, T. Nara, W. Yokota, and M. Taguchi, “Progress in Formation of Single-Pulse Beams by a Chopping System at the JAEA/TIARA facility”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP090, pp. 233-235.
[n] Y. J. Yuan, J. W. Xia, W.-L. Zhan, and H. W. Zhao, “Present Status and Future improvement of HIRFL-CSR”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC135, pp. 388-390.
[n] J.-W. Kim, A. Goto, T. Mitsumoto, and Y. Yano, “Studies on Single Turn Extraction for a Superconducting Cyclotron”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP6, pp. 2268-2270.
[n] B. Mustapha et al., “Alternative Design for the RISP Pre-Stripper Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 531-534. doi:10.18429/JACoW-LINAC2016-TUPLR028
[n] J.-W. Kim, “Status of the Rare Isotope Science Project in Korea”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPLB06, pp. 455-457.
[n] D. Gonnella et al., “Fundamental Studies on Doped SRF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB042, pp. 187-190.
[n] C. Riedel and J. Struckmeier, “A Posteriori Error Estimation for Simulations of Charged Particle Beams”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5A10, pp. 1405-1407.
[n] A. Antonov, R. E. Kuskov, and D. Bolkhovityanov, “Present Status of VEPP-5 Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB18, pp. 199-201.
[n] R. C. Webber, “Fermilab Booster Low Level RF System Upgrades”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ10, pp. 2687-2689.
[n] M. Bergher et al., “Status Report on D. C. I.”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1860-1863.
[n] B. Schlitt, M. Hoerr, A. Schnase, G. Schreiber, and W. Vinzenz, “RF System Development for the New 108 MHz Heavy Ion High-Energy Linac at GSI”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP058, pp. 556-558.
[n] M. T. Li, Y. W. An, S. Y. Xu, and T. G. Xu, “Longitudinal Tomography for Analysing the Longitudinal Phase Space Distribution in RCS of CSNS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 639-642. doi:10.18429/JACoW-IPAC2019-MOPRB029
[n] T. Toyama, D. Arakawa, I. Igarashi, J. Kishiro, K. Koba, and K. Takayama, “Beam Loss at the Beginning of Acceleration in the KEK-PS Main Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2V010, pp. 1599-1601.
[n] M. P. Level, P. C. Marin, M. Sommer, and H. Zyngier, “Collective Effects on Super-ACO”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 776-779.
[n] S. Barbanotti, W. Benecke, K. Jensch, M. Noak, and M. Schloesser, “Post-Production Dimensional Control of the Cold Masses and Vacuum Vessels for the XFEL Cryomodules”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP030, pp. 165-167.
[n] L. S. Shao et al., “Vacuum Laser Acceleration at BNL-ATF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP096, pp. 3022-3024.
[n] L. R. Evans and J. Gareyte, “Performance Limitations of the CERN SPS Collider”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2234-2237.
[n] M. Zach et al., “The H- High Intensity Beam Extraction System for TRIUMF”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3042-3045.
[n] S. Eylon et al., “Initial Commissioning Results of the RTA Injector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA3, pp. 3390-3392.
[n] T. Weilbach, K. Aulenbacher, and J. Dietrich, “Optical Electron Beam Diagnostics for Relativistic Electron Cooling Devices”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD48, pp. 158-160.
[n] A. Kalinin, “Pickup Electrode Electrodynamics Investigation”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC26, pp. 742-745.
[n] R. Kersevan, “NEG-Coated Vacuum Chambers at the ESRF: Present Status and Future Plans”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO029, pp. 2565-2567.
[n] T. Sen, C. M. Bhat, and J.-F. Ostiguy, “Stability of Flat Bunches in the Recycler Barrier Bucket”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP061, pp. 4679-4681.
[n] J. Tan, B. Bonin, J. Jodet, and H. Safa, “RF Processing of Field Emitting Particles”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2071-2074.
[n] A. Kalinin, “A Possibility of Constant Energy Extraction at the KEK ATF2”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH088, pp. 2994-2996.
[n] L. Medeiros Romao et al., “Iba C70 Cyclotron Development”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 54-56.
[n] W. Müller and W. Wolff, “On the Design of the Magnetic Field for a 450 MeV Proton Machine”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63H05, pp. XX-XX.
[n] L. S. Cowie and D. J. Scott, “RF Conditioning of the CLARA 400 Hz Photoinjector”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2067-2070. doi:10.18429/JACoW-IPAC2019-TUPTS065
[n] F. Staufenbiel, H. B??ttig, D. Janssen, P. Murcek, J. Teichert, and A. Arnold, “Field Profile Measurement of the 312 Cell SRF Gun”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP22, pp. 283-283.
[n] Y.-J. Chen, G. J. Caporaso, and A. C. Paul, “Controlling Backstreaming Ions from X-ray Converter Targets with Time Varying Final Focusing Solenoidal Lens and Beam Energy Variation”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4034, pp. 472-474.
[n] D. Gonnella, M. Liepe, and R. E. French, “Investigation of Spatial Variation of the Surface Resistance of a Superconducting RF Cavity”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP028, pp. 483-486.
[n] D. Einfeld and R. Richter, “The ELETTRA Linac to Storage Ring Transfer Line”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 887-890.
[n] Y. Polsky, P. J. Geoghegan, L. L. Jacobs, W. Lu, S. M. McTeer, and M. A. Plum, “Beam Stop Design Methodology and Description of a New SNS Beam Stop”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA028, pp. 1384-1386.
[n] L. Lilje, “Experience with the TTF”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper MOA03, pp. 93-96.
[n] B. Visentin, J.-P. Charrier, Y. Gasser, and S. Regnaud, “Fast Argon-Baking Process for Mass Production of Niobium Superconducting RF Cavities”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH141, pp. 381-383.
[n] T. Zwart, D. Cheever, W. S. Graves, D. Wang, and A. Zolfaghari, “Optimal RF Systems for Lightly Loaded Superconducting Structures”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS57, pp. XX-XX.
[n] G. D. Wait et al., “Design Concept for AGS Injection Kicker Upgrade to 2 GeV”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT014, pp. 1380-1382.
[n] D. L. Hall et al., “Surface Analysis and Material Property Studies of Nb3Sn on Niobium for Use in SRF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB045, pp. 665-668.
[n] F. Z. Hsiao, S.-H. Chang, W.-S. Chiou, H. C. Li, and H. H. Tsai, “Stability Improvement of the Cryogenic System at NSRRC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN093, pp. 380-382.
[n] S. Machida, “What We Learned from EMMA”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MO2PB01, pp. 14-18.
[n] J. Brodowski, “Design of a Versatile ESQ Transport System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3666-3669.
[n] F. Trinkel, F. Hinder, D. Shergelashvili, and H. Soltner, “Beam Based Calibration of a Rogowski Coil Used as a Horizontal and Vertical Beam Position Monitor”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 302-306. doi:10.18429/JACoW-IBIC2016-TUPG01
[n] V. Serri?¿re and J. Jacob, “Expected Lifetime Improvement with a Superconducting Harmonic RF System at the ESRF”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI004, pp. 748-750.
[n] M. Abs et al., “A New Design of Truly Selfshielding Baby-Cyclotrons for Positron Emitter Production”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 675-678.
[n] J. B. Donahue et al., “LANSCE Short-Pulse Spallation Source Target Upgrade”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P013, pp. 190-192.
[n] N. Simos, J. Brodowski, N. Catalan-Lasheras, H. Ludewig, and J. Wei, “Thermo-Mechanical Response of the Halo Intercepts Interacting with the SNS Proton Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH083, pp. 1402-1404.
[n] M. V. Arsentyeva, A. M. Barnyakov, A. E. Levichev, and D. A. Nikiforov, “Excitation of Millimeter Wavelength Cavity Structure”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 543-545. doi:10.18429/JACoW-LINAC2018-TUPO093
For LaTeX
Use Complete Form
For BibTeX
References
- G. Mazzitelli, B. Buonomo, L. Quintieri, and P. Valente, “The DAFNE Beam Test Facility: from 1 to 10 Milliards of Particles”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS121, pp. 846-848.
- B. Frammery, “The LHC Control System”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper I1_001.
- D. A. Malyutin, A. A. Starostenko, and D. Bolkhovityanov, “Use of a Three-Layer Control System for Non-Destructive Beam Probe Monitor”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA15, pp. 345-347.
- K. Furukawa et al., “Beam Feedback System Challenges at SuperKEKB Injector Linac”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper FRCOBAB04, pp. 1497-1500.
- P. W. Schmor, “New Achievements At Triumf And Future Plans”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 93-98.
- P. W. Schmor, “A Review of Polarized Ion Sources”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPE01, pp. 853-857.
- M. C. Ross, J. Nelson, M. Woodley, and A. Wolski, “Beam Based Alignment at the KEK Accelerator Test Facility”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI030, pp. 431-433.
- N. Steinhau-Kuehl, T. Eidtner, C. Hartmann, B. Henkel, and A. Matheisen, “Update on Quality Control of the Electro-Polishing Acid”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO081, pp. 811-813.
- J. L. Coleman, S. V. Benson, R. Evans, A. G. Grippo, and K. Jordan, “Laser Safety System for the IR Upgrade FEL at Jefferson Lab”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP069, pp. XX-XX.
- K. Haghighi mood and M. Aslaninejad, “2D Potential for an Elliptical Charge Distribution”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP073, pp. 4479-4481.
- D. J. Dunning, L. S. Cowie, and J. K. Jones, “XARA: X-Band Accelerator for Research and Applications”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 715-718.
- Q. Wu and I. Ben-Zvi, “Simulation of the High-Pass Filter for 56 MHz Cavity for RHIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC085, pp. 3078-3080.
- S. Bousson, “Advances in Superconducting RF Cavity Stiffening by Thermal Spraying”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper THA003, pp. 542-549.
- S. Kurashima, I. Ishibori, T. Nara, W. Yokota, and M. Taguchi, “Progress in Formation of Single-Pulse Beams by a Chopping System at the JAEA/TIARA facility”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP090, pp. 233-235.
- Y. J. Yuan, J. W. Xia, W.-L. Zhan, and H. W. Zhao, “Present Status and Future improvement of HIRFL-CSR”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC135, pp. 388-390.
- J.-W. Kim, A. Goto, T. Mitsumoto, and Y. Yano, “Studies on Single Turn Extraction for a Superconducting Cyclotron”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP6, pp. 2268-2270.
- B. Mustapha et al., “Alternative Design for the RISP Pre-Stripper Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 531-534.
- J.-W. Kim, “Status of the Rare Isotope Science Project in Korea”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPLB06, pp. 455-457.
- D. Gonnella et al., “Fundamental Studies on Doped SRF Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB042, pp. 187-190.
- C. Riedel and J. Struckmeier, “A Posteriori Error Estimation for Simulations of Charged Particle Beams”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5A10, pp. 1405-1407.
- A. Antonov, R. E. Kuskov, and D. Bolkhovityanov, “Present Status of VEPP-5 Control System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB18, pp. 199-201.
- R. C. Webber, “Fermilab Booster Low Level RF System Upgrades”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ10, pp. 2687-2689.
- M. Bergher et al., “Status Report on D. C. I.”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1860-1863.
- B. Schlitt, M. Hoerr, A. Schnase, G. Schreiber, and W. Vinzenz, “RF System Development for the New 108 MHz Heavy Ion High-Energy Linac at GSI”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP058, pp. 556-558.
- M. T. Li, Y. W. An, S. Y. Xu, and T. G. Xu, “Longitudinal Tomography for Analysing the Longitudinal Phase Space Distribution in RCS of CSNS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 639-642.
- T. Toyama, D. Arakawa, I. Igarashi, J. Kishiro, K. Koba, and K. Takayama, “Beam Loss at the Beginning of Acceleration in the KEK-PS Main Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2V010, pp. 1599-1601.
- M. P. Level, P. C. Marin, M. Sommer, and H. Zyngier, “Collective Effects on Super-ACO”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 776-779.
- S. Barbanotti, W. Benecke, K. Jensch, M. Noak, and M. Schloesser, “Post-Production Dimensional Control of the Cold Masses and Vacuum Vessels for the XFEL Cryomodules”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP030, pp. 165-167.
- L. S. Shao et al., “Vacuum Laser Acceleration at BNL-ATF”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP096, pp. 3022-3024.
- L. R. Evans and J. Gareyte, “Performance Limitations of the CERN SPS Collider”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2234-2237.
- M. Zach et al., “The H- High Intensity Beam Extraction System for TRIUMF”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3042-3045.
- S. Eylon et al., “Initial Commissioning Results of the RTA Injector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA3, pp. 3390-3392.
- T. Weilbach, K. Aulenbacher, and J. Dietrich, “Optical Electron Beam Diagnostics for Relativistic Electron Cooling Devices”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD48, pp. 158-160.
- A. Kalinin, “Pickup Electrode Electrodynamics Investigation”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC26, pp. 742-745.
- R. Kersevan, “NEG-Coated Vacuum Chambers at the ESRF: Present Status and Future Plans”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPDO029, pp. 2565-2567.
- T. Sen, C. M. Bhat, and J.-F. Ostiguy, “Stability of Flat Bunches in the Recycler Barrier Bucket”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP061, pp. 4679-4681.
- J. Tan, B. Bonin, J. Jodet, and H. Safa, “RF Processing of Field Emitting Particles”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2071-2074.
- A. Kalinin, “A Possibility of Constant Energy Extraction at the KEK ATF2”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH088, pp. 2994-2996.
- L. Medeiros Romao et al., “Iba C70 Cyclotron Development”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 54-56.
- W. Müller and W. Wolff, “On the Design of the Magnetic Field for a 450 MeV Proton Machine”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63H05, pp. XX-XX.
- L. S. Cowie and D. J. Scott, “RF Conditioning of the CLARA 400 Hz Photoinjector”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2067-2070.
- F. Staufenbiel, H. B??ttig, D. Janssen, P. Murcek, J. Teichert, and A. Arnold, “Field Profile Measurement of the 312 Cell SRF Gun”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP22, pp. 283-283.
- Y.-J. Chen, G. J. Caporaso, and A. C. Paul, “Controlling Backstreaming Ions from X-ray Converter Targets with Time Varying Final Focusing Solenoidal Lens and Beam Energy Variation”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4034, pp. 472-474.
- D. Gonnella, M. Liepe, and R. E. French, “Investigation of Spatial Variation of the Surface Resistance of a Superconducting RF Cavity”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP028, pp. 483-486.
- D. Einfeld and R. Richter, “The ELETTRA Linac to Storage Ring Transfer Line”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 887-890.
- Y. Polsky, P. J. Geoghegan, L. L. Jacobs, W. Lu, S. M. McTeer, and M. A. Plum, “Beam Stop Design Methodology and Description of a New SNS Beam Stop”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA028, pp. 1384-1386.
- L. Lilje, “Experience with the TTF”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper MOA03, pp. 93-96.
- B. Visentin, J.-P. Charrier, Y. Gasser, and S. Regnaud, “Fast Argon-Baking Process for Mass Production of Niobium Superconducting RF Cavities”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH141, pp. 381-383.
- T. Zwart, D. Cheever, W. S. Graves, D. Wang, and A. Zolfaghari, “Optimal RF Systems for Lightly Loaded Superconducting Structures”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS57, pp. XX-XX.
- G. D. Wait et al., “Design Concept for AGS Injection Kicker Upgrade to 2 GeV”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT014, pp. 1380-1382.
- D. L. Hall et al., “Surface Analysis and Material Property Studies of Nb3Sn on Niobium for Use in SRF Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB045, pp. 665-668.
- F. Z. Hsiao, S.-H. Chang, W.-S. Chiou, H. C. Li, and H. H. Tsai, “Stability Improvement of the Cryogenic System at NSRRC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN093, pp. 380-382.
- S. Machida, “What We Learned from EMMA”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MO2PB01, pp. 14-18.
- J. Brodowski, “Design of a Versatile ESQ Transport System”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3666-3669.
- F. Trinkel, F. Hinder, D. Shergelashvili, and H. Soltner, “Beam Based Calibration of a Rogowski Coil Used as a Horizontal and Vertical Beam Position Monitor”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 302-306.
- V. Serri?¿re and J. Jacob, “Expected Lifetime Improvement with a Superconducting Harmonic RF System at the ESRF”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI004, pp. 748-750.
- M. Abs et al., “A New Design of Truly Selfshielding Baby-Cyclotrons for Positron Emitter Production”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 675-678.
- J. B. Donahue et al., “LANSCE Short-Pulse Spallation Source Target Upgrade”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P013, pp. 190-192.
- N. Simos, J. Brodowski, N. Catalan-Lasheras, H. Ludewig, and J. Wei, “Thermo-Mechanical Response of the Halo Intercepts Interacting with the SNS Proton Beam”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH083, pp. 1402-1404.
- M. V. Arsentyeva, A. M. Barnyakov, A. E. Levichev, and D. A. Nikiforov, “Excitation of Millimeter Wavelength Cavity Structure”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 543-545.
Back to search