JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Musardo, D. A. Harder, C. A. Kitegi, and T. Tanabe, “Magnetic Measurements of the NSLS-II Insertion Devices”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1693-1695. doi:10.18429/JACoW-IPAC2015-TUPJE037
[n]	A. V. Philippov and A. Tuzikov, “Gold Ions Beam Losses at the Nuclotron Booster”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 441-443. doi:10.18429/JACoW-RUPAC2016-WEPSB036
[n]	A. I. Fatkina, O. O. Iakushkin, and N. O. Tikhonov, “Application of GPGPUs and Multicore CPUs in Optimization of Some of the MpdRoot Codes”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 417-419. doi:10.18429/JACoW-RUPAC2016-WEPSB025
[n]	R. A. Rimmer et al., “Development of a High-Power RF Cavity for the PEP-II B Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ06, pp. 1729-1731. 
[n]	M. K. Grecki, Z. Geng, S. Simrock, B. Aminov, and G. Ayvazyan, “LLRF System Requirement Engineering for the European XFEL”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP103, pp. 1033-1035. 
[n]	S. Esin, L. Kravchuk, V. Paramonov, and G. Romanov, “The Disk and Washer Structure for Moscow Meson Factory Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-53, pp. 657-659. 
[n]	P. Van Trappen et al., “SPS Beam Dump System (SBDS) Commissioning After Relocation and Upgrade”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2530-2532. doi:10.18429/JACoW-IPAC2022-THPOST039
[n]	F. B. Kroes et al., “Improvement of the 400 kV Linac Electron Source of AmPS”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1032-1035. 
[n]	A. V. Sy, Y. S. Derbenev, V. S. Morozov, A. Afanasev, Y. Bao, and R. P. Johnson, “Aberration Compensation in a Skew Parametric-Resonance Ionization Cooling Channel”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3221-3223. doi:10.18429/JACoW-IPAC2017-WEPIK116
[n]	A. Galimberti et al., “Improvements on the Photon Beam Diagnostics at ELETTRA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI109, pp. 1891-1893. 
[n]	J. Stetson, S. Adam, M. Humbel, W. Joho, and Th. Stammbach, “The Commissioning of PSI Injector 2 for High Intensity, High Quality Beams”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-05, pp. 36-39. 
[n]	L. Picardi, C. Ronsivalle, and B. Spataro, “The First Module of the 3 GHz Side Coupled Drift Tube Linac SCDTL: Numerical Studies of RF Properties and Cold Tests Results”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1B02, pp. 1999-2001. 
[n]	S. G. Arutunian and A. V. Margaryan, “Oscillating Wire as a ``Resonant Target'' for Beam Transversal Gradient Investigation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3412-3414. doi:10.18429/JACoW-IPAC2014-THPME076
[n]	S. Ferry and E. Karantzoulis, “The FERMI@elettra Beam Dump”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP042, pp. 2887-2889. 
[n]	S. G. Arutunian et al., “PETRA Proton Beam Profiling by Vibrating Wire Scanner”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT016, pp. XX-XX. 
[n]	P.-A. Duperrex, P. Baumann, S. Joray, D. C. Kiselev, D. Laube, and D. Reggiani, “New Centering Beam Monitor for High Power Proton Beam Rotating Target”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 189-191. doi:10.18429/JACoW-CYCLOTRONS2019-TUP016
[n]	B. S. Kyle, R. B. Appleby, J. K. Jones, P. H. Williams, M. J. de Loos, and S. B. van der Geer, “CSR and Space Charge Studies for the CLARA Phase 1 Beamline”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3851-3854. doi:10.18429/JACoW-IPAC2017-THPAB059
[n]	E. Roussel et al., “Numerical Study of the Microbunching Instability at UVSOR-III: Influence of the Resistive and Inductive Impedances”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1656-1658. doi:10.18429/JACoW-IPAC2014-TUPRI042
[n]	A. Adelmann, S. R. A. Adam, H. Fitze, R. Geus, M. Humbel, and L. Stingelin, “On Start to End Simulation and Modeling Issues of the Megawatt Proton Beam Facility at PSI”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT055, pp. 3319-3321. 
[n]	S. B. van der Geer, M. J. de Loos, and B. D. Muratori, “Tracking Through Analytic Quadrupole Fringe Fields With GPT”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 489-491. doi:10.18429/JACoW-IPAC2015-MOPJE075
[n]	R. Valizadeh et al., “Low Secondary Electron Yield of Laser Treated Surfaces of Copper, Aluminium and Stainless Steel”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1089-1092. doi:10.18429/JACoW-IPAC2016-TUOCB02
[n]	E. Nebot Del Busto et al., “Monte Carlo Simulations of Beam Losses in the Test Beam Line of CTF3”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC47, pp. 189-192. 
[n]	C. Pillai et al., “The LANSCE Low Momentum Beam Monitor”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP68, pp. 423-425. 
[n]	J. Wanczyk and T. Persson, “Optics function determination using luminosity data”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPM015, unpublished. 
[n]	R. Oweiss et al., “Development of Quality Control Procedures for the Processing of ReA3 Copper Plated Fundamental Power Coupler”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP053, pp. 1031-1035. 
[n]	F. Gerigk et al., “Development of a Cell-Coupled Drift Tube Linac (CCDTL) for Linac4”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP008, pp. 67-69. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search