Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. H. Wang, D. M. Kong, Z. H. Luo, J. M. Qiao, and H. S. Zhang, “Improvement and Application of the Beijing Proton Linac (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-55, pp. 828-830.
[n] W. Meyer et al., “Generation of High Power 140 GHz Microwaves with an FEL for the MTX Experiment”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1551-1554.
[n] D. Walters, J. Noonan, J. Gagliano, G. Harris, and V. Svirtun, “An Ancillary Pumping System for the APS Vacuum System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P001, pp. 3580-3582.
[n] D. McGhee, J. Bogaty, and W. Praeg, “A 28 kV _ 0.025%, 200 kW DC Power Supply”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3746-3749.
[n] C. Chen et al., “DESIGN AND MEASUREMENT OF THE SSRF MAGNET PROTOTYPES”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP034, pp. XX-XX.
[n] X. L. Su et al., “Measurement of Electron Bunch Length via a Tunable-Gap Undulator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 295-297. doi:10.18429/JACoW-IPAC2017-MOPAB075
[n] H. Itoh, T. Enoto, S. Nisiyama, and S. Tomioka, “Spectrum Analysis of an Electromagnetic Field Generated by Linac Electron Beams”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-67, pp. 860-862.
[n] A. S. Fisher et al., “Commissioning the Beam-Loss Monitoring System of the LCLS Superconducting Linac”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 187-190. doi:10.18429/JACoW-IBIC2023-TUP005
[n] A. A. Pryanichnikov et al., “Status of the Proton Therapy Complex Prometheus”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 135-138. doi:10.18429/JACoW-RUPAC2018-FRXMH03
[n] L. S. Nadolski et al., “SOLEIL Machine Status and Upgrade”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1397-1400. doi:10.18429/JACoW-IPAC2022-TUPOMS005
[n] R. Koontz, M. Akemoto, S. Gold, A. Krasnykh, and Z. Wilson, “NLC Klystron Pulse Modulator R&D at SLAC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P097, pp. 1319-1321.
[n] S. Calatroni et al., “Influence of Copper Substrate Treatments on Properties of Niobium Coatings”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I16, pp. 49-66.
[n] D. Boussard, P. Brown, and J. Tueckmantel, “Electroacoustic Oscillations in the LEP SC Cavities”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP011L, pp. 2097-2099.
[n] V. K. Makovev, V. F. Minashkin, A. Yu. Molodozhentsev, K. Prokesh, V. F. Shevtsov, and G. I. Sidorov, “RF System of the Prague Medical Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02K, pp. 1814-1816.
[n] L. Calabretta, A. Caruso, A. Spart?á, and E. Zappal?á, “The Radiofrequency Pulsing System at INFN-LNS”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-20, pp. XX-XX.
[n] K. Koseki et al., “R&D Works on 1MHz Power Modulator for Induction Synchrotron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC011, pp. 568-570.
[n] B. Han, D. J. Newland, T. Hunter, and M. P. Stockli, “Physics Design of a Prototype 2-Solenoid LEBT for the SNS Injector”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP038, pp. 1564-1566.
[n] M. Garlasché et al., “High-Gradient Test of a 3 GHz Single-Cell Cavity”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP037, pp. 839-841.
[n] H. Ishimaru et al., “Operational Characteristics of the 30 GeV Electron-Positron Collider, TRISTAN”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1597-1600.
[n] F. Perlick et al., “An Electron Beam Detector for the FLASH II Beam Dump”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF05, pp. 814-817.
[n] U. Bechstedt et al., “Magnets for the German Spallation Source SNQ”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3631-3634.
[n] P. Tavares, “A Low Vertical beta Mode for the LNLS UVX Electron Storage Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2781-2784.
[n] T. J. Fessenden et al., “The Experimental Test Accelerator (ETA) II”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3401-3404.
[n] F.-T. Chung et al., “Development of a quality test platform for solid-state power amplifiers in NSRRC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3707-3709. doi:10.18429/JACoW-IPAC2024-THPR84
[n] M. McGee, R. Doremus, and R. Wands, “Mechanical Stability Study of Type IV Cryomodule (ILC Prototype)”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN104, pp. 2277-2279.
[n] A. Caruso, A. Spart?á, and A. Longhitano, “Steps Forward In The Digital Rf Control System At Lns”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 476-478.
[n] M. Crescenti, “Commissioning and Experience in Stripping, Filtering and Measuring the 4.2 MeV/U Lead Ion Beam at CERN Linac 3”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP17, pp. 363-365.
[n] X. M. Wen and X. H. Wang, “Commissioning Study of the Parasitic Mode with 3W1 Wiggler Magnet on the BEPC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15010, pp. XX-XX.
[n] T. Shibata et al., “The leakage field of the new high-field septum magnets for fast extraction in Main Ring of J-PARC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2459-2462. doi:10.18429/JACoW-IPAC2023-TUPM103
[n] S. Henderson et al., “Beam Dump Window Design for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG020, pp. 1467-1469.
[n] B. B. Pollock et al., “Two-Screen Method for Determining Electron Beam Energy and Deflection from Laser Wakefield Acceleration”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP101, pp. 3035-3037.
[n] D. Trbojevic, F. Meot, J. Berg, and S. Brooks, “Fixed tunes fast cycling permanent magnet proton FFA synchrotron”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 467-470. doi:10.18429/JACoW-IPAC2024-MOPR06
[n] J. M. Meyer, “Tango Collaboration News”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WECOAA01, pp. 16-18.
[n] J. Welch, G. Codner, G. Dugan, A. Temnykh, A. Jain, and J. Muratore, “Tests and Measurements of the CESR Phase III Interaction Region Superconducting Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH101, pp. 3472-3474.
[n] E. Matias, “Friday Closeout Presentation”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper FRTA01, pp. 219-219.
[n] K. T. Hsu et al., “Control System for the Superconducting Insertion Devices of NSRRC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE024, pp. 2376-2378.
[n] J. P. Holzbauer et al., “Active Microphonics Compensation for LCLS-II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2687-2689. doi:10.18429/JACoW-IPAC2018-WEPML007
[n] M. Basten et al., “Latest Cryogenic Test Results of the Superconducting ?=0.069 CH-cavities for the HELIAC-project”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 392-395. doi:10.18429/JACoW-SRF2019-TUP004
[n] V. Khachatryan, J. Barley, M. Forster, L. Hirshman, and S. Wang, “Pulsed correctors for the beam vertical stability during injection in CESR”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2982-2984. doi:10.18429/JACoW-IPAC2024-THPC09
[n] K. Shinto et al., “Strongly Focused He+ Beam Source for Alpha Particle Measurement at ITER”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS096, pp. 1726-1728.
[n] A. Masi, M. Lamberti, R. Losito, and M. Martino, “Reduction of Magnetic Interference on the Position Sensors of the LHC Collimators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS039, pp. 1623-1625.
[n] S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 280-284. doi:10.18429/JACoW-ICALEPCS2017-TUDPL01
[n] T. Lavine, “Review of Pulsed RF Power Generation”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 302-307.
[n] G. J. Caporaso et al., “Status of the Dielectric Wall Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH3GAI02, pp. 3085-3089.
[n] J. Gutekunst, F. Klumb, G. Kautzmann, H. M. Durand, and M. Sosin, “Continuous position estimation for the full remote alignment system of the High Luminosity LHC upgrade”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3337-3340. doi:10.18429/JACoW-IPAC2024-THPG36
[n] J. Duke and A. Letchford, “Design of an Electrostatic Energy Separator for the ISIS RFQ Test Stand”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA148, pp. 2208-2210.
[n] R. H. Helm, J. E. Clendenin, S. D. Ecklund, A. V. Kulikov, and R. Pitthan, “Isochronous 180[degree] Turns for the SLC Positron System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 500-503.
[n] P. Barbier et al., “RF System Develpments for High Current Accumulation in the ESRF Storage Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1859-1862.
[n] P. L. Walstrom and E. G. Cook, “Extraction Kickers and Modulators for the Advanced Hydrotest Facility”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH030, pp. 3735-3737.
[n] H. Tarawneh, P. N'gotta, L. K. Roslund, A. Thiel, and K. ?àhnberg, “Compact APPLE X for Future SXL FEL and 3 GeV Ring at MAX IV Laboratory”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1833-1835. doi:10.18429/JACoW-IPAC2019-TUPRB072
[n] T. Shintomi et al., “The Construction and Test Results of a 10T Dipole Magnet”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3719-3722.
[n] X. L. Zhang et al., “Upgrades of the Tevatron Electron Lens”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB077, pp. 1781-1783.
[n] S. Brandenburg, J. P. M. Beijers, H. R. Kremers, V. Mironov, and J. Mulder And S, “Ion Source Development At The Agor Facility”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 303-307.
[n] T. Eggert, J. Enders, M. Espig, Y. Fritzsche, N. Kurichiyanil, and M. Wagner, “Setup for Cooled GaAs Cathodes With Increased Charge Lifetime”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4542-4544. doi:10.18429/JACoW-IPAC2018-THPMK100
[n] A. C. Caruso, F. Consoli, A. Spart?á, and A. Longhitano, “A Compact Solution for DDS-Generator, Turn-on and Protections in RF Accelerator Systems”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP057, pp. 159-161.
[n] T. Toyama, D. Arakawa, I. Igarashi, J. Kishiro, K. Koba, and K. Takayama, “Beam Loss at the Beginning of Acceleration in the KEK-PS Main Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2V010, pp. 1599-1601.
[n] C. Gonzalez-Ortiz, P. Ostroumov, and R. Ainsworth, “Optimizing the sextupole configuration for simultaneous correction of third order resonances at the recycler ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 736-739. doi:10.18429/JACoW-IPAC2024-MOPS16
For LaTeX
Use Complete Form
For BibTeX
References
- S. H. Wang, D. M. Kong, Z. H. Luo, J. M. Qiao, and H. S. Zhang, “Improvement and Application of the Beijing Proton Linac (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-55, pp. 828-830.
- W. Meyer et al., “Generation of High Power 140 GHz Microwaves with an FEL for the MTX Experiment”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1551-1554.
- D. Walters, J. Noonan, J. Gagliano, G. Harris, and V. Svirtun, “An Ancillary Pumping System for the APS Vacuum System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P001, pp. 3580-3582.
- D. McGhee, J. Bogaty, and W. Praeg, “A 28 kV _ 0.025%, 200 kW DC Power Supply”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3746-3749.
- C. Chen et al., “DESIGN AND MEASUREMENT OF THE SSRF MAGNET PROTOTYPES”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THP034, pp. XX-XX.
- X. L. Su et al., “Measurement of Electron Bunch Length via a Tunable-Gap Undulator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 295-297.
- H. Itoh, T. Enoto, S. Nisiyama, and S. Tomioka, “Spectrum Analysis of an Electromagnetic Field Generated by Linac Electron Beams”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-67, pp. 860-862.
- A. S. Fisher et al., “Commissioning the Beam-Loss Monitoring System of the LCLS Superconducting Linac”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TUP005, pp. 187-190.
- A. A. Pryanichnikov et al., “Status of the Proton Therapy Complex Prometheus”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 135-138.
- L. S. Nadolski et al., “SOLEIL Machine Status and Upgrade”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1397-1400.
- R. Koontz, M. Akemoto, S. Gold, A. Krasnykh, and Z. Wilson, “NLC Klystron Pulse Modulator R&D at SLAC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P097, pp. 1319-1321.
- S. Calatroni et al., “Influence of Copper Substrate Treatments on Properties of Niobium Coatings”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I16, pp. 49-66.
- D. Boussard, P. Brown, and J. Tueckmantel, “Electroacoustic Oscillations in the LEP SC Cavities”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP011L, pp. 2097-2099.
- V. K. Makovev, V. F. Minashkin, A. Yu. Molodozhentsev, K. Prokesh, V. F. Shevtsov, and G. I. Sidorov, “RF System of the Prague Medical Synchrotron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02K, pp. 1814-1816.
- L. Calabretta, A. Caruso, A. Spart?á, and E. Zappal?á, “The Radiofrequency Pulsing System at INFN-LNS”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P4-20, pp. XX-XX.
- K. Koseki et al., “R&D Works on 1MHz Power Modulator for Induction Synchrotron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC011, pp. 568-570.
- B. Han, D. J. Newland, T. Hunter, and M. P. Stockli, “Physics Design of a Prototype 2-Solenoid LEBT for the SNS Injector”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP038, pp. 1564-1566.
- M. Garlasché et al., “High-Gradient Test of a 3 GHz Single-Cell Cavity”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP037, pp. 839-841.
- H. Ishimaru et al., “Operational Characteristics of the 30 GeV Electron-Positron Collider, TRISTAN”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1597-1600.
- F. Perlick et al., “An Electron Beam Detector for the FLASH II Beam Dump”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF05, pp. 814-817.
- U. Bechstedt et al., “Magnets for the German Spallation Source SNQ”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3631-3634.
- P. Tavares, “A Low Vertical beta Mode for the LNLS UVX Electron Storage Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2781-2784.
- T. J. Fessenden et al., “The Experimental Test Accelerator (ETA) II”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3401-3404.
- F.-T. Chung et al., “Development of a quality test platform for solid-state power amplifiers in NSRRC”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR84, pp. 3707-3709.
- M. McGee, R. Doremus, and R. Wands, “Mechanical Stability Study of Type IV Cryomodule (ILC Prototype)”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN104, pp. 2277-2279.
- A. Caruso, A. Spart?á, and A. Longhitano, “Steps Forward In The Digital Rf Control System At Lns”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 476-478.
- M. Crescenti, “Commissioning and Experience in Stripping, Filtering and Measuring the 4.2 MeV/U Lead Ion Beam at CERN Linac 3”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP17, pp. 363-365.
- X. M. Wen and X. H. Wang, “Commissioning Study of the Parasitic Mode with 3W1 Wiggler Magnet on the BEPC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP15010, pp. XX-XX.
- T. Shibata et al., “The leakage field of the new high-field septum magnets for fast extraction in Main Ring of J-PARC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM103, pp. 2459-2462.
- S. Henderson et al., “Beam Dump Window Design for the Spallation Neutron Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG020, pp. 1467-1469.
- B. B. Pollock et al., “Two-Screen Method for Determining Electron Beam Energy and Deflection from Laser Wakefield Acceleration”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP101, pp. 3035-3037.
- D. Trbojevic, F. Meot, J. Berg, and S. Brooks, “Fixed tunes fast cycling permanent magnet proton FFA synchrotron”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR06, pp. 467-470.
- J. M. Meyer, “Tango Collaboration News”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WECOAA01, pp. 16-18.
- J. Welch, G. Codner, G. Dugan, A. Temnykh, A. Jain, and J. Muratore, “Tests and Measurements of the CESR Phase III Interaction Region Superconducting Magnets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH101, pp. 3472-3474.
- E. Matias, “Friday Closeout Presentation”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper FRTA01, pp. 219-219.
- K. T. Hsu et al., “Control System for the Superconducting Insertion Devices of NSRRC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE024, pp. 2376-2378.
- J. P. Holzbauer et al., “Active Microphonics Compensation for LCLS-II”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2687-2689.
- M. Basten et al., “Latest Cryogenic Test Results of the Superconducting ?=0.069 CH-cavities for the HELIAC-project”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 392-395.
- V. Khachatryan, J. Barley, M. Forster, L. Hirshman, and S. Wang, “Pulsed correctors for the beam vertical stability during injection in CESR”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC09, pp. 2982-2984.
- K. Shinto et al., “Strongly Focused He+ Beam Source for Alpha Particle Measurement at ITER”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS096, pp. 1726-1728.
- A. Masi, M. Lamberti, R. Losito, and M. Martino, “Reduction of Magnetic Interference on the Position Sensors of the LHC Collimators”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS039, pp. 1623-1625.
- S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 280-284.
- T. Lavine, “Review of Pulsed RF Power Generation”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 302-307.
- G. J. Caporaso et al., “Status of the Dielectric Wall Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH3GAI02, pp. 3085-3089.
- J. Gutekunst, F. Klumb, G. Kautzmann, H. M. Durand, and M. Sosin, “Continuous position estimation for the full remote alignment system of the High Luminosity LHC upgrade”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG36, pp. 3337-3340.
- J. Duke and A. Letchford, “Design of an Electrostatic Energy Separator for the ISIS RFQ Test Stand”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA148, pp. 2208-2210.
- R. H. Helm, J. E. Clendenin, S. D. Ecklund, A. V. Kulikov, and R. Pitthan, “Isochronous 180[degree] Turns for the SLC Positron System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 500-503.
- P. Barbier et al., “RF System Develpments for High Current Accumulation in the ESRF Storage Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1859-1862.
- P. L. Walstrom and E. G. Cook, “Extraction Kickers and Modulators for the Advanced Hydrotest Facility”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH030, pp. 3735-3737.
- H. Tarawneh, P. N'gotta, L. K. Roslund, A. Thiel, and K. ?àhnberg, “Compact APPLE X for Future SXL FEL and 3 GeV Ring at MAX IV Laboratory”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1833-1835.
- T. Shintomi et al., “The Construction and Test Results of a 10T Dipole Magnet”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3719-3722.
- X. L. Zhang et al., “Upgrades of the Tevatron Electron Lens”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB077, pp. 1781-1783.
- S. Brandenburg, J. P. M. Beijers, H. R. Kremers, V. Mironov, and J. Mulder And S, “Ion Source Development At The Agor Facility”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 303-307.
- T. Eggert, J. Enders, M. Espig, Y. Fritzsche, N. Kurichiyanil, and M. Wagner, “Setup for Cooled GaAs Cathodes With Increased Charge Lifetime”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4542-4544.
- A. C. Caruso, F. Consoli, A. Spart?á, and A. Longhitano, “A Compact Solution for DDS-Generator, Turn-on and Protections in RF Accelerator Systems”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP057, pp. 159-161.
- T. Toyama, D. Arakawa, I. Igarashi, J. Kishiro, K. Koba, and K. Takayama, “Beam Loss at the Beginning of Acceleration in the KEK-PS Main Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2V010, pp. 1599-1601.
- C. Gonzalez-Ortiz, P. Ostroumov, and R. Ainsworth, “Optimizing the sextupole configuration for simultaneous correction of third order resonances at the recycler ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS16, pp. 736-739.
Back to search