JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	F. Thomas et al., “X-Ray Absorber Design and Calculations for the EBS Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 257-261. doi:10.18429/JACoW-MEDSI2016-WEAA02
[n]	A. A. Sidorin et al., “A Method for Measuring the Positron Lifetime in Solid Matter with a Continuous Positron Beam”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 267-269. doi:10.18429/JACoW-RUPAC2018-TUPSA58
[n]	E. Bulyak and A. Mytsykov, “Method of Defining the Tolerances of Storage Ring Lenses for Imperfections and Misalignments”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1619-1622. 
[n]	S. Golge and B. Vlahovic, “REVIEWOF LOW-ENERGY POSITRON BEAM FACILITIES”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD025, pp. 1464-1466. 
[n]	H. C. Liu et al., “High Power Conditioning of the DTL-1 for CSNS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4207-4209. doi:10.18429/JACoW-IPAC2017-THPIK049
[n]	S. Cheban, D. Passarelli, and V. Roger, “Design and Manufacturing Challenges of the SSR1 Current Leads for PIP-II”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 329-331. doi:10.18429/JACoW-SRF2019-MOP101
[n]	M. BastaniNejad et al., “Field Emission Measurements from Niobium Electrodes”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP287, pp. 2020-2022. 
[n]	H. V. Smith Jr and J. D. Schneider, “Status Update on the Low-Energy Demonstration Accelerator LEDA”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4014, pp. 418-420. 
[n]	R. S. Livingston, “Session IV Introductory Comments”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D02, pp. 182-182. 
[n]	P. Sichta, J. Dong, G. Oliaro, and P. Roney, “Overview of the NSTX Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUBT004, pp. XX-XX. 
[n]	J. M. Han et al., “Design and Fabrication of the KOMAC RFQ”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA61, pp. 3525-3527. 
[n]	J. J. Kritzinger, A. M??ller, and H. A. Smit, “Experience with Electrical Contact Systems for Radio Frequencies at NAC”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-25, pp. 261-264. 
[n]	J. DeLong, J. M. Brennan, T. Hayes, N. Le, and K. S. Smith, “A Bunch to Bucket Phase Detector Using Digital Receiver Technology”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB025, pp. 3341-3343. 
[n]	E. S. Kotov, A. M. Batrakov, G. A. Fatkin, A. V. Pavlenko, K. S. Shtro, and M. Yu. Vasilyev, “VME Based Digitizers for Waveform Monitoring System of Linear Induction Accelerator (LIA-20)”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1291-1293. doi:10.18429/JACoW-ICALEPCS2017-THMPL09
[n]	J. W. Angle, E. M. Lechner, A. D. Palczewski, C. E. Reece, M. J. Kelley, and F. A. Stevie, “A SIMS Approach for the Analysis of Furnace Contamination”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 406. doi:10.18429/JACoW-SRF2021-TUPFDV004
[n]	M. Y. Park, H. J. Kwon, Y. H. Kim, J. H. Jang, and Y. S. Cho, “DTL Fabrication Status of PEFP Linac”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP21008, pp. XX-XX. 
[n]	H. N. Jungwirth and D. P. Brombach, “A Novel Concept for Superconducting Ring-Cyclotron Magnets”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G2-10, pp. 498-501. 
[n]	L. Michelotti, “Classification of Half-Integer Resonance Dynamics”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2258-2261. 
[n]	L. Shen et al., “Pre-chirp Control Broadband Non-collinear Optical Parametric Amplifier for the Future Laser Weak-field Accelerator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA038, pp. 1223-1225. 
[n]	T. Mastorides, J. D. Fox, C. H. Rivetta, and D. Van Winkle, “Application of Non-Linear Time-Domain RF Simulations to Longitudinal Emittance Studies for the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP095, pp. 2234-2236. 
[n]	J. Jacob et al., “Test of the SOLEIL Cryomodule Prototype with Beam at ESRF”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP22, pp. 82-85. 
[n]	A. Latina et al., “Electron Cooling Simulation and Experimental Benchmarks at LEIR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 776-779. doi:10.18429/JACoW-IPAC2018-TUPAF039
[n]	R. L. Cassel and M. N. Nguyen, “A Unique Power Supply for the PEP-II Klystron at SLAC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P014, pp. 3482-3484. 
[n]	I. Yovchev, W. Lawson, M. Castle, G. Nusinovich, V. Granatstein, and M. Reiser, “Design of Four-Cavity High Power Gyroklystron Amplifier”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP161, pp. 1040-1042. 
[n]	D. Rogers and H. Ferrell, “Overview of the Superconducting Super Collider RF Systems”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 661-664. 
[n]	G. Kirkman-Amemiya, M. S. Choi, M. A. Gundersen, and N. Reinhardt, “Fast Risetime BLT Switches for Accelerator Applications”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 591-594. 
[n]	H. Takahashi, Y. An, X. Chen, and M. Nomura, “Optimization of the Target for Muon Colliders”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W027, pp. 402-404. 
[n]	J. M. Grames et al., “Two Wien Filter Spin Flipper”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP025, pp. 862-864. 
[n]	T. Stadlbauer et al., “The Beam Chopper Power Converter for MedAustron: Safety by Design and Development”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2741-2743. doi:10.18429/JACoW-IPAC2015-WEPMA002
[n]	S. Machida, S. S. Gilardoni, M. Giovannozzi, S. Hirlaender, A. Huschauer, and C. R. Prior, “Intensity Effects in the Formation of Stable Islands in Phase Space During the Multi-Turn Extraction Process at the CERN PS”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 283-287. doi:10.18429/JACoW-HB2016-TUAM7X01
[n]	C. Feng et al., “Measurement of the Local Energy Spread of Electron Beam at SDUV-FEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEOBB01, pp. 2143-2145. 
[n]	K. Seiya et al., “Beam Studies for the Proton Improvement Plan (PIP) - Reducing Beam Loss at the Fermilab Booster”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4027-4029. doi:10.18429/JACoW-IPAC2015-THPF131
[n]	S. Eckhouse, E. Chu, and M. Montgomery, “Scaling Laws and Optimization of Electron Linear Induction Accelerators”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 911-914. 
[n]	J. D. Sedillo, J. D. Gilpatrick, J. D. Nguyen, and M. E. Gruchalla, “LANSCE 1L Harp Data Acquisition System Upgrade”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD11, pp. 438-441. 
[n]	W. X. Zhou et al., “The Remote Control System for LAPECR1”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA022, pp. 3192-3194. 
[n]	S. D. Putnam, “Survey of Compact High Current Electron Accelerators”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 887-892. 
[n]	G. Parzen, “Calculating Orbit Properties of F-F Cyclotrons”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A09, pp. 40-44. 
[n]	E. G. Cook et al., “Solid-State Modulators for RF and Fast Kickers”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAB008, pp. 637-641. 
[n]	E. Meintanis and E. Stiliaris, “Estimation of Transversal Emittance using an Artificial Neural Network”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B17, pp. 1812-1814. 
[n]	K. Endo, S. Fukumoto, K. Mishima, S. Ninomiya, and G. Silvestrov, “Table-Top Proton Synchrotron Ring for Medical Applications”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A09, pp. 2515-2517. 
[n]	R. F. Bentley, “Pre-Accelerator for the NEN Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S8-12, pp. 462-464. 
[n]	T. Itahashi et al., “Recent Developments of the RCNP AVF Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-06, pp. 53-56. 
[n]	M. Martens, G. Annala, and P. Bauer, “Tune and Coupling Drift Compensation during the Tevatron Injection Porch”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB031, pp. 3359-3361. 
[n]	E. O. Ballard, E. A. Meyer, K. B. Riepe, H. L. Rutkowski, R. B. Shurter, and F. W. Van Haaften, “Design Status of Heavy Ion Injector Program”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1788-1791. 
[n]	R. W. Garnett, C. Rose, F. Shelley, and J. D. Zumbro, “Status of a New Switchyard Design for LANSCE”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4021, pp. 436-438. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search