Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. F. Verster, “Regenerative Beam Extraction from the 150-MeV Synchrocyclotron at the Laboratoire Curie”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59E02, pp. 224-229.
[n] E. Boggasch et al., “Plasma Lenses for Heavy Ion Beam Focusing”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 596-599.
[n] A. Shemyakin et al., “Fermilab Electron Cooling Project: Commissioning of the 5 MeV Recirculation Test Set-up”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH046, pp. 2548-2550.
[n] X. Y. Zhang et al., “Preliminary Design of 325 MHz Half-Wave Resonator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO025, pp. 2369-2371.
[n] G. Berger, M. Bouvy, Th. Daras, E. Kaerts, M. Loiselet, and G. Ryckewaert, “Radioactive Ion Beams: Results and Perspectives for Light Ion Therapy and Diagnostic Purposes”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1793-1796.
[n] C. Ankenbrandt and S. D. Holmes, “Limits on the Transverse Phase Space Density in the Fermilab Booster”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1066-1069.
[n] C. Yao, L. Emery, D. Hui, H. Shang, and Y. P. Sun, “Application of SVD Analysis to Deflecting Cavitiy Space Harmonics”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1283-1286. doi:10.18429/JACoW-IPAC2018-TUPMF016
[n] G. D. Yendell, U. K. Pedersen, N. Tartoni, S. Williams, A. Greer, and T. C. Nicholls, “Odin - a Control and Data Acquisition Framework for Excalibur 1M and 3M Detectors”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 966-969. doi:10.18429/JACoW-ICALEPCS2017-TUPHA212
[n] W. Zhang et al., “Analysis of Beam Loss Induced Abort Kicker Instability”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD084, pp. 3713-3715.
[n] B. X. Yang, W. Berg, A. R. Brill, J. C. Dooling, L. Erwin, and A. F. Pietryla, “Beam Measurements of a Large Solid-Angle Beam Loss Monitor in the APS”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM042, pp. 228-232.
[n] S. Posen and M. Liepe, “Stoichiometric Nb3Sn in First Samples Coated at Cornell”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO066, pp. 886-889.
[n] D. Barna, W. Bartmann, M. A. Fraser, and R. Ostojic, “Design and Optimization of Electrostatic Deflectors for ELENA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 382-384. doi:10.18429/JACoW-IPAC2015-MOPJE043
[n] E. Hoyer et al., “Wigglers at the Advanced Light Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ24, pp. 1444-1446.
[n] G. M. Arbique, T. Taylor, M. H. Thrasher, and J. S. C. Wills, “Multi-Beamlet Injection to the RFQ1 Accelerator - A Comparison of ECR and Duopigatron Proton Sources”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 842-845.
[n] M. Pont et al., “The Stripline Kicker Prototype for the CLIC Damping Rings at ALBA: Installation, Commissioning and Beam Characterisation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4062-4065. doi:10.18429/JACoW-IPAC2018-THPMF013
[n] B. Bauvir, M. G?®rard, B. Marchand, D. Prieels, and R. S?®pulchre, “Dynamic Delivery Planning in IBA Proton Pencil Beam”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4B19, pp. 2533-2535.
[n] J. K. Johnson and R. Nemetz, “Power Combiners/Dividers for Loop Pickup and Kicker Arrays for FNAL Stochastic Cooling Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2171-2174.
[n] A. Harvey, “Tailored Vacuum Chambers for AC Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3815-3818.
[n] L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3887-3889. doi:10.18429/JACoW-IPAC2014-THPRI052
[n] G. Kuznetsov, A. Sery, A. Shemyakin, V. Shiltsev, and N. Solyak, “Performance of a High-Perveance Electron Gun with a Convex Cathode”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6A03, pp. 1271-1273.
[n] D. Nguyen, M. Lee, R. Sass, and H. Shoaee, “Accelerator and Feedback Control Simulation Using Neural Networks”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1437-1440.
[n] X. He, J. Lei, and J. R. Zhang, “Development of a High-Power High-Directivity Directional Coupler and Four Power Dividers for S-Band”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2422-2424. doi:10.18429/JACoW-IPAC2018-WEPMF031
[n] D. J. Scott et al., “Design and Characterisation of the Focusing Solenoidal System for the CLARA High Repetition Rate Electron Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4346-4348. doi:10.18429/JACoW-IPAC2017-THPIK107
[n] W. Barry, R. Rossmanith, and M. Wise, “A Simple Beam Position Monitor System for CEBAF”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-51, pp. 649-651.
[n] E. K. Kallos et al., “Plasma Wakefield Acceleration Utilizing Multiple Electron Bunches”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS031, pp. 3070-3072.
[n] R. Alves Pires, D. Moehl, Y. Orlov, F. Pedersen, A. Poncet, and S. van der Meer, “On the Theory of Coherent Instabilities Due to Coupling between a Dense Cooled Beam and Charged Particles from the Residual Gas”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 800-803.
[n] C. J. Bocchetta et al., “One and a Half Years of Experience with the Operation of the Synchrotron Light Source ELETTRA”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAR21, pp. 309-311.
[n] V. Bailey et al., “An Experimental Program to Investigate the Strong Focussed, Spiral Line Recirculating Induction Accelerator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 920-923.
[n] T. Katayama et al., “Numerical Design Study of Stochastic Stacking of 3 GeV Anti-Proton Beam in the RESR for the FAIR Project”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper MOA2MCIO02, pp. 41-45.
[n] D. Humphries et al., “Design of End Magnetic Structures for the Advanced Light Source Wigglers”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ25, pp. 1447-1449.
[n] L. Gong, W. Chen, W. Kang, L. Z. Li, H. H. Lu, and Y. F. Yang, “Hall Element Relative Position and Angle Calibrations for the Cryogenic Permanent Magnet Undulator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2386-2388. doi:10.18429/JACoW-IPAC2016-WEPMR048
[n] J. V. Campelo, “Longitudinal Impedance Characterization of the CERN SPS Vacuum Flanges”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 363-365. doi:10.18429/JACoW-IPAC2015-MOPJE036
[n] S. Seletsky and A. V. Shemyakin, “Beam-Based Calibration of the Electron Energy in the Fermilab Electron Cooler”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT064, pp. 3638-3640.
[n] Y. K. Batygin and A. Scheinker, “Suppression of Halo Formation in FODO Focusing Channel with Nonlinear Focusing”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA064, pp. 1850-1852.
[n] Y. Hashimoto et al., “A Gas Sheet Beam Profile Monitor for the HIMAC Synchrotron”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI113, pp. 1900-1902.
[n] L. Solomon, D. Lynch, J. Safranek, and O. Singh, “Chamber Motion Measurements at the NSLS X-RAY Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA167, pp. 2244-2246.
[n] X. D. Yang and Y. J. Yuan, “Commissioning of Electron Cooling in CSRe”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper FRM1MCIO02, pp. 173-177.
[n] J. A. Pasour, T. P. Hughes, and K. Thomason, “Development of the Collective Interaction Klystron (CIK)”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 109-112.
[n] N. Delerue et al., “Effect of Beam Dynamics Processes in the Low Energy Ring ThomX”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1933-1935. doi:10.18429/JACoW-IPAC2014-WEPRO001
[n] S. Wang, R. Li, R. A. Rimmer, H. Wang, and Y. Zhang, “Rf System Requirements for JLab's MEIC Collider Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO077, pp. 2477-2479.
[n] W. Chen, C. Cao, C. Shi, and Z. Yin, “End Chamfer Study and Field Measurements of the BEPCII Dipoles”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT004, pp. 919-921.
[n] R. E. Worsham, “Stability and Tolerance of the Separated Orbit Cyclotron”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 644-648.
[n] A. R. Bainbridge, J. A. Clarke, B. J. A. Shepherd, N. A. Collomb, and M. Modena, “The ZEPTO Dipole: Zero Power Tuneable Optics for CLIC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4338-4341. doi:10.18429/JACoW-IPAC2017-THPIK105
[n] S. G. Anderson, J. B. Rosenzweig, J. Crane, and G. P. Le Sage, “Emittance Measurements of the Space Charge Dominated Thomson Source Photoinjector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH073, pp. 2260-2262.
[n] D. J. Nicklaus et al., “An Erlang-Based Front End Framework for Accelerator Controls”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THDAUST02, pp. 1264-1266.
[n] D. H. Rowlands et al., “Design and Simulation of a Cusp Gun for Gyro-amplifier Application in High Frequency RF Accelerators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH156, pp. 1391-1393.
[n] Y. Li et al., “Design and development of a FOC algorithm based on machine learning for the HEPS”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 439-442. doi:10.18429/JACoW-IBIC2025-TUPCO34
[n] R. Frankel, “Experiments in Computer Control and Analysis of the AGS”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1042-1044.
[n] J. L. Conradie et al., “A Radioactive Ion Beam and Isotope Production Facility for iThemba LABS”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 79-83. doi:10.18429/JACoW-RUPAC2016-WEYMH02
[n] F. Pedersen and E. C. Raka, “A Measurement of the Longitudial Coupling Impedance in the Brookhaven AGS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3592-3595.
[n] K. Ko et al., “Advances in Electromagnetic Modelling through High Performance Computing”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THA05, pp. 428-432.
[n] E. Tanabe, M. Bayer, S. D. Ireton, and G. Kalkanis, “An X-Band Coaxial Standing-Wave Linear Accelerator Structure”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-10, pp. 455-457.
[n] N. I. Her et al., “Design of The Superconducting Magnet Supporting Post for KSTAR Tokamak”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH476, pp. 773-775.
[n] R. Baartman and J. Doornbos, “Mass Separator for The ISAC Project at TRIUMPH”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP120G, pp. 2482-2484.
[n] I. S. Guk, J. I. M. Botman, A. N. Dovbnya, S. G. Kononenko, F. A. Peev, and A. S. Tarasenko, “Recirculator SALO Project in NSC KIPT”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP082, pp. 2710-2712.
[n] J. H. Kamperschroer, J. F. O'Hara, L. A. Day, J. D. Gilpatrick, and D. M. Kerstiens, “Analysis of Data from the LEDA Wire Scanner/Halo Scraper”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH037, pp. 1306-1308.
[n] J. V. Campelo et al., “An Extended SPS Longitudinal Impedance Model”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 360-362. doi:10.18429/JACoW-IPAC2015-MOPJE035
[n] J. W. G. Thomason, D. C. Faircloth, R. Sidlow, C. M. Thomas, and M. Whitehead, “The Effect of Extraction Geometry on the Measured ISIS H Minus Ion Source Beam”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT141, pp. 1458-1460.
[n] J. S. Chai et al., “Operation Experiences of MC50 Cyclotron, KIRAMS”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10006, pp. XX-XX.
[n] A. Fry, E. Hahn, W. Hartung, M. Kuchnir, P. Michelato, and D. Sertore, “Experience at Fermilab with High Quantum Efficiency Photo-Cathodes for RF Electron Guns”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4101, pp. 642-644.
[n] M. Xiao, “Recycler Chromaticities and End Shims for NOvA at Fermilab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR085, pp. 2023-2025.
[n] B. G. Chidley, “Beam Transport Design Using a Thin Lens Approximation”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P07, pp. 338-342.
[n] B. Constance, R. Corsini, D. Gamba, and P. K. Skowronski, “Recent Improvements to the Control of the CTF3 High-Current Drive Beam”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB003, pp. 180-182.
[n] N. Joshi et al., “Bead-pull analysis of HOM in X-band linearizer linac on CLARA, with update on HOM measurement system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4859-4862. doi:10.18429/JACoW-IPAC2023-THPL172
[n] W. B. Sampson, P. F. Dahl, S. Kiss, A. D. McInturff, and K. E. Robins, “ISABELLE Quadrupoles”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1296-1299.
[n] A. Lasheen et al., “Synchrotron Frequency Shift as a Probe of the CERN SPS Reactive Impedance”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO4LR02, pp. 409-413.
[n] H. Heydari, “Emittance Calculation Using Liouville's theorem for a Diagonalized Hamiltonian”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1687-1690.
[n] B. W. Allardyce et al., “The Extraction System of the Improved CERN Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-17, pp. 287-291.
[n] G. Robert-Demolaize, A. Marusic, S. Tepikian, and S. M. White, “Commissioning of a beta Knob for Dynamic IR Correction at RHIC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC061, pp. 1314-1316.
[n] Yu. N. Telegin et al., “Internal Beam Facilities at Kharkov PSSR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 599-602.
For LaTeX
Use Complete Form
For BibTeX
References
- N. F. Verster, “Regenerative Beam Extraction from the 150-MeV Synchrocyclotron at the Laboratoire Curie”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59E02, pp. 224-229.
- E. Boggasch et al., “Plasma Lenses for Heavy Ion Beam Focusing”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 596-599.
- A. Shemyakin et al., “Fermilab Electron Cooling Project: Commissioning of the 5 MeV Recirculation Test Set-up”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH046, pp. 2548-2550.
- X. Y. Zhang et al., “Preliminary Design of 325 MHz Half-Wave Resonator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO025, pp. 2369-2371.
- G. Berger, M. Bouvy, Th. Daras, E. Kaerts, M. Loiselet, and G. Ryckewaert, “Radioactive Ion Beams: Results and Perspectives for Light Ion Therapy and Diagnostic Purposes”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1793-1796.
- C. Ankenbrandt and S. D. Holmes, “Limits on the Transverse Phase Space Density in the Fermilab Booster”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1066-1069.
- C. Yao, L. Emery, D. Hui, H. Shang, and Y. P. Sun, “Application of SVD Analysis to Deflecting Cavitiy Space Harmonics”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1283-1286.
- G. D. Yendell, U. K. Pedersen, N. Tartoni, S. Williams, A. Greer, and T. C. Nicholls, “Odin - a Control and Data Acquisition Framework for Excalibur 1M and 3M Detectors”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 966-969.
- W. Zhang et al., “Analysis of Beam Loss Induced Abort Kicker Instability”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD084, pp. 3713-3715.
- B. X. Yang, W. Berg, A. R. Brill, J. C. Dooling, L. Erwin, and A. F. Pietryla, “Beam Measurements of a Large Solid-Angle Beam Loss Monitor in the APS”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM042, pp. 228-232.
- S. Posen and M. Liepe, “Stoichiometric Nb3Sn in First Samples Coated at Cornell”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO066, pp. 886-889.
- D. Barna, W. Bartmann, M. A. Fraser, and R. Ostojic, “Design and Optimization of Electrostatic Deflectors for ELENA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 382-384.
- E. Hoyer et al., “Wigglers at the Advanced Light Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ24, pp. 1444-1446.
- G. M. Arbique, T. Taylor, M. H. Thrasher, and J. S. C. Wills, “Multi-Beamlet Injection to the RFQ1 Accelerator - A Comparison of ECR and Duopigatron Proton Sources”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 842-845.
- M. Pont et al., “The Stripline Kicker Prototype for the CLIC Damping Rings at ALBA: Installation, Commissioning and Beam Characterisation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4062-4065.
- B. Bauvir, M. G?®rard, B. Marchand, D. Prieels, and R. S?®pulchre, “Dynamic Delivery Planning in IBA Proton Pencil Beam”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4B19, pp. 2533-2535.
- J. K. Johnson and R. Nemetz, “Power Combiners/Dividers for Loop Pickup and Kicker Arrays for FNAL Stochastic Cooling Rings”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2171-2174.
- A. Harvey, “Tailored Vacuum Chambers for AC Magnets”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3815-3818.
- L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3887-3889.
- G. Kuznetsov, A. Sery, A. Shemyakin, V. Shiltsev, and N. Solyak, “Performance of a High-Perveance Electron Gun with a Convex Cathode”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6A03, pp. 1271-1273.
- D. Nguyen, M. Lee, R. Sass, and H. Shoaee, “Accelerator and Feedback Control Simulation Using Neural Networks”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1437-1440.
- X. He, J. Lei, and J. R. Zhang, “Development of a High-Power High-Directivity Directional Coupler and Four Power Dividers for S-Band”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2422-2424.
- D. J. Scott et al., “Design and Characterisation of the Focusing Solenoidal System for the CLARA High Repetition Rate Electron Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4346-4348.
- W. Barry, R. Rossmanith, and M. Wise, “A Simple Beam Position Monitor System for CEBAF”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-51, pp. 649-651.
- E. K. Kallos et al., “Plasma Wakefield Acceleration Utilizing Multiple Electron Bunches”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS031, pp. 3070-3072.
- R. Alves Pires, D. Moehl, Y. Orlov, F. Pedersen, A. Poncet, and S. van der Meer, “On the Theory of Coherent Instabilities Due to Coupling between a Dense Cooled Beam and Charged Particles from the Residual Gas”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 800-803.
- C. J. Bocchetta et al., “One and a Half Years of Experience with the Operation of the Synchrotron Light Source ELETTRA”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAR21, pp. 309-311.
- V. Bailey et al., “An Experimental Program to Investigate the Strong Focussed, Spiral Line Recirculating Induction Accelerator”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 920-923.
- T. Katayama et al., “Numerical Design Study of Stochastic Stacking of 3 GeV Anti-Proton Beam in the RESR for the FAIR Project”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper MOA2MCIO02, pp. 41-45.
- D. Humphries et al., “Design of End Magnetic Structures for the Advanced Light Source Wigglers”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ25, pp. 1447-1449.
- L. Gong, W. Chen, W. Kang, L. Z. Li, H. H. Lu, and Y. F. Yang, “Hall Element Relative Position and Angle Calibrations for the Cryogenic Permanent Magnet Undulator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2386-2388.
- J. V. Campelo, “Longitudinal Impedance Characterization of the CERN SPS Vacuum Flanges”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 363-365.
- S. Seletsky and A. V. Shemyakin, “Beam-Based Calibration of the Electron Energy in the Fermilab Electron Cooler”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT064, pp. 3638-3640.
- Y. K. Batygin and A. Scheinker, “Suppression of Halo Formation in FODO Focusing Channel with Nonlinear Focusing”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA064, pp. 1850-1852.
- Y. Hashimoto et al., “A Gas Sheet Beam Profile Monitor for the HIMAC Synchrotron”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI113, pp. 1900-1902.
- L. Solomon, D. Lynch, J. Safranek, and O. Singh, “Chamber Motion Measurements at the NSLS X-RAY Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA167, pp. 2244-2246.
- X. D. Yang and Y. J. Yuan, “Commissioning of Electron Cooling in CSRe”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper FRM1MCIO02, pp. 173-177.
- J. A. Pasour, T. P. Hughes, and K. Thomason, “Development of the Collective Interaction Klystron (CIK)”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 109-112.
- N. Delerue et al., “Effect of Beam Dynamics Processes in the Low Energy Ring ThomX”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1933-1935.
- S. Wang, R. Li, R. A. Rimmer, H. Wang, and Y. Zhang, “Rf System Requirements for JLab's MEIC Collider Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO077, pp. 2477-2479.
- W. Chen, C. Cao, C. Shi, and Z. Yin, “End Chamfer Study and Field Measurements of the BEPCII Dipoles”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT004, pp. 919-921.
- R. E. Worsham, “Stability and Tolerance of the Separated Orbit Cyclotron”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 644-648.
- A. R. Bainbridge, J. A. Clarke, B. J. A. Shepherd, N. A. Collomb, and M. Modena, “The ZEPTO Dipole: Zero Power Tuneable Optics for CLIC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4338-4341.
- S. G. Anderson, J. B. Rosenzweig, J. Crane, and G. P. Le Sage, “Emittance Measurements of the Space Charge Dominated Thomson Source Photoinjector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH073, pp. 2260-2262.
- D. J. Nicklaus et al., “An Erlang-Based Front End Framework for Accelerator Controls”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THDAUST02, pp. 1264-1266.
- D. H. Rowlands et al., “Design and Simulation of a Cusp Gun for Gyro-amplifier Application in High Frequency RF Accelerators”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH156, pp. 1391-1393.
- Y. Li et al., “Design and development of a FOC algorithm based on machine learning for the HEPS”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 439-442.
- R. Frankel, “Experiments in Computer Control and Analysis of the AGS”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1042-1044.
- J. L. Conradie et al., “A Radioactive Ion Beam and Isotope Production Facility for iThemba LABS”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 79-83.
- F. Pedersen and E. C. Raka, “A Measurement of the Longitudial Coupling Impedance in the Brookhaven AGS”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3592-3595.
- K. Ko et al., “Advances in Electromagnetic Modelling through High Performance Computing”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THA05, pp. 428-432.
- E. Tanabe, M. Bayer, S. D. Ireton, and G. Kalkanis, “An X-Band Coaxial Standing-Wave Linear Accelerator Structure”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-10, pp. 455-457.
- N. I. Her et al., “Design of The Superconducting Magnet Supporting Post for KSTAR Tokamak”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH476, pp. 773-775.
- R. Baartman and J. Doornbos, “Mass Separator for The ISAC Project at TRIUMPH”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP120G, pp. 2482-2484.
- I. S. Guk, J. I. M. Botman, A. N. Dovbnya, S. G. Kononenko, F. A. Peev, and A. S. Tarasenko, “Recirculator SALO Project in NSC KIPT”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP082, pp. 2710-2712.
- J. H. Kamperschroer, J. F. O'Hara, L. A. Day, J. D. Gilpatrick, and D. M. Kerstiens, “Analysis of Data from the LEDA Wire Scanner/Halo Scraper”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH037, pp. 1306-1308.
- J. V. Campelo et al., “An Extended SPS Longitudinal Impedance Model”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 360-362.
- J. W. G. Thomason, D. C. Faircloth, R. Sidlow, C. M. Thomas, and M. Whitehead, “The Effect of Extraction Geometry on the Measured ISIS H Minus Ion Source Beam”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT141, pp. 1458-1460.
- J. S. Chai et al., “Operation Experiences of MC50 Cyclotron, KIRAMS”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP10006, pp. XX-XX.
- A. Fry, E. Hahn, W. Hartung, M. Kuchnir, P. Michelato, and D. Sertore, “Experience at Fermilab with High Quantum Efficiency Photo-Cathodes for RF Electron Guns”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4101, pp. 642-644.
- M. Xiao, “Recycler Chromaticities and End Shims for NOvA at Fermilab”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR085, pp. 2023-2025.
- B. G. Chidley, “Beam Transport Design Using a Thin Lens Approximation”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P07, pp. 338-342.
- B. Constance, R. Corsini, D. Gamba, and P. K. Skowronski, “Recent Improvements to the Control of the CTF3 High-Current Drive Beam”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB003, pp. 180-182.
- N. Joshi et al., “Bead-pull analysis of HOM in X-band linearizer linac on CLARA, with update on HOM measurement system”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL172, pp. 4859-4862.
- W. B. Sampson, P. F. Dahl, S. Kiss, A. D. McInturff, and K. E. Robins, “ISABELLE Quadrupoles”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1296-1299.
- A. Lasheen et al., “Synchrotron Frequency Shift as a Probe of the CERN SPS Reactive Impedance”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper THO4LR02, pp. 409-413.
- H. Heydari, “Emittance Calculation Using Liouville's theorem for a Diagonalized Hamiltonian”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1687-1690.
- B. W. Allardyce et al., “The Extraction System of the Improved CERN Synchro-Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-17, pp. 287-291.
- G. Robert-Demolaize, A. Marusic, S. Tepikian, and S. M. White, “Commissioning of a beta Knob for Dynamic IR Correction at RHIC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC061, pp. 1314-1316.
- Yu. N. Telegin et al., “Internal Beam Facilities at Kharkov PSSR”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 599-602.
Back to search