Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Z. Sun, Z. Baraissov, M. Liepe, D. A. Muller, T. E. Oseroff, and M. O. Thompson, “Materials Design for Superconducting RF Cavities: Electroplating Sn, Zr, and Au onto Nb and and Chemical Vapor Deposition”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 401-404. doi:10.18429/JACoW-SRF2023-TUPTB006
[n] A. J. Capel et al., “Data Management at JET with a Look Forward to ITER”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOPA01, pp. 74-78.
[n] A. Schempp, “Overview of Recent RFQ Projects”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MO302, pp. 41-45.
[n] A. D. Kovalenko, “Nuclotron: Status and Future”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3A16, pp. 554-556.
[n] V. I. Gordin, R. N. Litunovsky, A. K. Vaganov, V. S. Vasil, and D. V. Efremov, “The Diagnostics of the Beam Phase Characteristics of the 240 cm Isochronous Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-26, pp. 2401-2402.
[n] J. Haimson and B. Mecklenburg, “Design and Construction of a Chopper Driven 11.4 GHz Traveling Wave RF Generator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 243-246.
[n] J. Y. Huang, C. Kim, I. S. Ko, and W. Namkung, “Measurements for 2.4 GeV Beam by Diagnostic Beamline in PLS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7A08, pp. 1753-1755.
[n] H. Kotaki et al., “Research for an Advanced Accelerator at JAERI-APRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99915, pp. XX-XX.
[n] M.-H. Wang, Y. Cai, R. O. Hettel, and Y. Nosochkov, “Lattice Design of PEP-X as a Light Source Machineat SLAC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC059, pp. 2127-2129.
[n] G. G. Oksuzyan, E. D. Gazazyan, M. Ivanyan, A. T. Margaryan, and A. D. Ter-Poghosyan, “Ultra-high Frequency Scanning Cavities for Non-relativistic Electron Beam”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT005, pp. 2466-2468.
[n] V. N. Boriskin, A. N. Dovbnya, and A. N. Savchenko, “The Computer Diagnostics of Linac Unit Failures”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP056L, pp. 1789-1790.
[n] R. Gebel, O. Felden, R. Maier, and P. von Rossen, “Recent Gains in Polarized Beam Intensities for the Cooler Synchrotron COSY at J??lich”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS087, pp. 1705-1707.
[n] M. Kim, S. M. Ammons, B. Hackel, and L. Poyneer, “Processing System Design for Implementing a Linear Quadratic Gaussian (LQG) Controller to Optimize the Real-Time Correction of High Wind-Blown Turbulence”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 762. doi:10.18429/JACoW-ICALEPCS2019-TUCPL02
[n] X. E. Lin, K. Ko, and C.-K. Ng, “Impedance Spectrum for the PEP-II RF Cavity”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ12, pp. 1744-1746.
[n] J. Haimson and B. Mecklenburg, “Design and Construction of a 33 GHz Brazed Accelerator Waveguide for High Gradient Operation”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1928-1931.
[n] D. Kehne, P. Letta, B. Dunham, and R. Kazimi, “Automated Startup of the CEBAF 45 MeV Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P054, pp. 2484-2486.
[n] R. Demitra, A. Biagioni, L. Crincoli, M. Ferrario, and R. Pompili, “3D characterization of plasma density in capillary discharges for plasma-based accelerators”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1608-1610. doi:10.18429/JACoW-IPAC2025-TUPS113
[n] C. C. A. de Villiers and B. Xaia, “Use of Tornado in KAT-?¡7 and MeerKAT Framework”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 977-979. doi:10.18429/JACoW-ICALEPCS2015-WEPGF118
[n] J. Sheehan and H. Langenbach, “Power Supply Regulation by Microprocesser”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2876-2879.
[n] E. Bulyak, “Ion Clearing Methods for the Electron Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP071G, pp. 1078-1080.
[n] R. Singh, P. Forck, P. Kowina, and A. Reiter, “Digital Processing of Pick-up Signals for Position and Tune Determination”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 321-326. doi:10.18429/JACoW-IBIC2015-TUPB010
[n] D. N. Shatilov and A. A. Zholents, “Spin Matching Conditions for a Storage Ring with Solenoid Rotators”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 917-920.
[n] B. Sayyar-Rodsari, E. Hartman, M. J. Lee, C. Schweiger, and Y. T. Yan, “Efficient Modeling of Nonlinear Beam Optics Using Parametric Model Independent Analysis”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper MPPE040, unpublished.
[n] T. J. Fessenden et al., “The Experimental Test Accelerator (ETA) II”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3401-3404.
For LaTeX
Use Complete Form
For BibTeX
References
- Z. Sun, Z. Baraissov, M. Liepe, D. A. Muller, T. E. Oseroff, and M. O. Thompson, “Materials Design for Superconducting RF Cavities: Electroplating Sn, Zr, and Au onto Nb and and Chemical Vapor Deposition”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB006, pp. 401-404.
- A. J. Capel et al., “Data Management at JET with a Look Forward to ITER”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOPA01, pp. 74-78.
- A. Schempp, “Overview of Recent RFQ Projects”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper MO302, pp. 41-45.
- A. D. Kovalenko, “Nuclotron: Status and Future”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3A16, pp. 554-556.
- V. I. Gordin, R. N. Litunovsky, A. K. Vaganov, V. S. Vasil, and D. V. Efremov, “The Diagnostics of the Beam Phase Characteristics of the 240 cm Isochronous Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-26, pp. 2401-2402.
- J. Haimson and B. Mecklenburg, “Design and Construction of a Chopper Driven 11.4 GHz Traveling Wave RF Generator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 243-246.
- J. Y. Huang, C. Kim, I. S. Ko, and W. Namkung, “Measurements for 2.4 GeV Beam by Diagnostic Beamline in PLS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7A08, pp. 1753-1755.
- H. Kotaki et al., “Research for an Advanced Accelerator at JAERI-APRC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP99915, pp. XX-XX.
- M.-H. Wang, Y. Cai, R. O. Hettel, and Y. Nosochkov, “Lattice Design of PEP-X as a Light Source Machineat SLAC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC059, pp. 2127-2129.
- G. G. Oksuzyan, E. D. Gazazyan, M. Ivanyan, A. T. Margaryan, and A. D. Ter-Poghosyan, “Ultra-high Frequency Scanning Cavities for Non-relativistic Electron Beam”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT005, pp. 2466-2468.
- V. N. Boriskin, A. N. Dovbnya, and A. N. Savchenko, “The Computer Diagnostics of Linac Unit Failures”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP056L, pp. 1789-1790.
- R. Gebel, O. Felden, R. Maier, and P. von Rossen, “Recent Gains in Polarized Beam Intensities for the Cooler Synchrotron COSY at J??lich”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS087, pp. 1705-1707.
- M. Kim, S. M. Ammons, B. Hackel, and L. Poyneer, “Processing System Design for Implementing a Linear Quadratic Gaussian (LQG) Controller to Optimize the Real-Time Correction of High Wind-Blown Turbulence”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 762.
- X. E. Lin, K. Ko, and C.-K. Ng, “Impedance Spectrum for the PEP-II RF Cavity”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPQ12, pp. 1744-1746.
- J. Haimson and B. Mecklenburg, “Design and Construction of a 33 GHz Brazed Accelerator Waveguide for High Gradient Operation”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1928-1931.
- D. Kehne, P. Letta, B. Dunham, and R. Kazimi, “Automated Startup of the CEBAF 45 MeV Injector”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P054, pp. 2484-2486.
- R. Demitra, A. Biagioni, L. Crincoli, M. Ferrario, and R. Pompili, “3D characterization of plasma density in capillary discharges for plasma-based accelerators”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS113, pp. 1608-1610.
- C. C. A. de Villiers and B. Xaia, “Use of Tornado in KAT-?¡7 and MeerKAT Framework”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 977-979.
- J. Sheehan and H. Langenbach, “Power Supply Regulation by Microprocesser”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2876-2879.
- E. Bulyak, “Ion Clearing Methods for the Electron Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP071G, pp. 1078-1080.
- R. Singh, P. Forck, P. Kowina, and A. Reiter, “Digital Processing of Pick-up Signals for Position and Tune Determination”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 321-326.
- D. N. Shatilov and A. A. Zholents, “Spin Matching Conditions for a Storage Ring with Solenoid Rotators”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 917-920.
- B. Sayyar-Rodsari, E. Hartman, M. J. Lee, C. Schweiger, and Y. T. Yan, “Efficient Modeling of Nonlinear Beam Optics Using Parametric Model Independent Analysis”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE040, unpublished.
- T. J. Fessenden et al., “The Experimental Test Accelerator (ETA) II”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3401-3404.
Back to search