Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Velev et al., “A Conceptual Design of the 2+ MW LBNE Beam Absorber”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP297, pp. 2041-2043.
[n] W. Waldron, R. J. Briggs, and L. R. Reginato, “High Voltage Operation of Helical Pulseline Structures for Ion Acceleration”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT029, pp. 2092-2094.
[n] A. Van Ginneken and M. Awschalom, “New Approach to Shielding Calculations for Very High Energy Accelerators”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 459-462.
[n] A. Hershcovitch et al., “Novel Apparatus and Technique for Measuring RR Resistivity of Tube Coatings at Cryogenic Temperatures”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4304-4306. doi:10.18429/JACoW-IPAC2019-THPTS081
[n] R. B. Chavan et al., “Fiber Optic Control for Electron Gun Power Supplies of 3MeV DC Accelerator”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP023, pp. XX-XX.
[n] C. M. Bhat et al., “Pbar Deceleration in the Fermilab Main Injector: Tune-up Studies with Proton Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOPB005, pp. 440-442.
[n] R. Baiod, D. J. Harding, D. E. Johnson, P. S. Martin, and S. Mishra, “The Main Injector Trim Dipole Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP04, pp. 1331-1333.
[n] P. Ausset et al., “Beam Diagnostics Instrumentation for the High Energy Beam Transport Line of I.P.H.I.”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT013, pp. XX-XX.
[n] N. Sei, H. Ogawa, and K. Yamada, “Third Harmonic Lasing in the NIJI-IV Storage Ring Free-Electron Lasers”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPA20, pp. 239-242.
[n] D. R. Dechow, D. T. Abell, J. F. Amundson, L. Curfman McInnes, B. Norris, and P. Stoltz, “A Beam Dynamics Application Based on the Common Component Architecture”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS019, pp. 3552-3554.
[n] D. S. Barton and R. L. Witkover, “Negative Ion Source Tests for H- Injection at the Brookhaven AGS”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2681-2684.
[n] R. M. Talman, “Ring Circumference and Two Rings vs One Ring”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THT4A3, pp. 27-32.
[n] K. R. Bourkland, “A 34 kA Rapid Cycling PFN Power Supply for Driving Injection Magnets”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3974-3977.
[n] N. V. Mityanina et al., “Longitudinal Particle Dynamics and Cooling in NICA Collider”, in Proc. COOL'19, Novosibirsk, Russia, Sep. 2019, pp. 64-67. doi:10.18429/JACoW-COOL2019-THA01
[n] Yu. Kazarinov, J. W. Stetson, and P. A. Zavodszky, “Possible Scheme of the Analyzing Part of a Cyclotron Injection Beamline with Higher Energy”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE034, pp. 2345-2347.
[n] S. Tomin, G. Geloni, and M. Scholz, “FEL Optimization: From Model-Free to Model-Dependent Approaches and ML Prospects”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 762-765. doi:10.18429/JACoW-FEL2019-THD03
[n] D. A. Finley, “Calculation of Integrated Luminosity for Beams Stored in the Tevatron Collider”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1834-1837.
[n] J. Bisognano and M. Fripp, “Requirements for Longitudinal HOM Damping in Superconducting Recirculating Linacs”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-32, pp. 388-390.
[n] J. Bisognano, “Impedance and Wakefields Beyond Cutoff”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE1-01, pp. 261-266.
[n] J. Lesrel, S. Bousson, T. Junquera, A. Caruette, and M. Fouaidy, “Study of Thermal Effects in SRF Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97B12, pp. 374-384.
[n] E. P. Plawski, S. Kulinski, and M. Wojciechowski, “Five Cell Method of Tuning Biperiodic Linear Standing Wave /2 Accelerating Structures”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP092, pp. 3423-3425.
[n] A. M. Sessler, “The Electron Ring Accelerator”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper G-2, pp. 606-607.
[n] B. F. Milton, “A Cyclotron Orbit Code Using Second Order Transfer Matrices”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper G-06, pp. 240-243.
[n] G. A. Riabov et al., “Some Design Features of the 80 MeV H- Isochronous Cyclotron at Gatchina”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEBOR02, pp. 109-111.
[n] A. A. Kulakov and P. V. Martyshkin, “VEPP-5 Positron Source Simulations”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP007L, pp. 1466-1468.
[n] J. Y. Liu, H. B. Chen, A. Grudiev, J. Shi, and H. Zha, “Wakefield Suppression in the Main LINAC of the Klystron-Based First Stage of CLIC at 380 GeV”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2899-2902. doi:10.18429/JACoW-IPAC2019-WEPRB043
[n] C. G. Beetham et al., “Conversion of the SPS to a Multicycling Accelerator”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1231-1234.
[n] S. Dewan et al., “1.12 MVA Peak Two Quadrant Pulse Switch Mode Power Supply for SNS Injection Bump Magnet”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE107, pp. 2460-2462.
[n] G. P. Jackson and S. D. Howe, “Direct Antiproton Deceleration in the Fermilab Proton Driver”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE023, pp. 1817-1819.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Velev et al., “A Conceptual Design of the 2+ MW LBNE Beam Absorber”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP297, pp. 2041-2043.
- W. Waldron, R. J. Briggs, and L. R. Reginato, “High Voltage Operation of Helical Pulseline Structures for Ion Acceleration”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT029, pp. 2092-2094.
- A. Van Ginneken and M. Awschalom, “New Approach to Shielding Calculations for Very High Energy Accelerators”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 459-462.
- A. Hershcovitch et al., “Novel Apparatus and Technique for Measuring RR Resistivity of Tube Coatings at Cryogenic Temperatures”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4304-4306.
- R. B. Chavan et al., “Fiber Optic Control for Electron Gun Power Supplies of 3MeV DC Accelerator”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP023, pp. XX-XX.
- C. M. Bhat et al., “Pbar Deceleration in the Fermilab Main Injector: Tune-up Studies with Proton Beam”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOPB005, pp. 440-442.
- R. Baiod, D. J. Harding, D. E. Johnson, P. S. Martin, and S. Mishra, “The Main Injector Trim Dipole Magnets”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAP04, pp. 1331-1333.
- P. Ausset et al., “Beam Diagnostics Instrumentation for the High Energy Beam Transport Line of I.P.H.I.”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT013, pp. XX-XX.
- N. Sei, H. Ogawa, and K. Yamada, “Third Harmonic Lasing in the NIJI-IV Storage Ring Free-Electron Lasers”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper TUPA20, pp. 239-242.
- D. R. Dechow, D. T. Abell, J. F. Amundson, L. Curfman McInnes, B. Norris, and P. Stoltz, “A Beam Dynamics Application Based on the Common Component Architecture”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS019, pp. 3552-3554.
- D. S. Barton and R. L. Witkover, “Negative Ion Source Tests for H- Injection at the Brookhaven AGS”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2681-2684.
- R. M. Talman, “Ring Circumference and Two Rings vs One Ring”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper THT4A3, pp. 27-32.
- K. R. Bourkland, “A 34 kA Rapid Cycling PFN Power Supply for Driving Injection Magnets”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3974-3977.
- N. V. Mityanina et al., “Longitudinal Particle Dynamics and Cooling in NICA Collider”, in Proc. 12th Workshop on Beam Cooling and Related Topics (COOL'19), Novosibirsk, Russia, Sep. 2019, pp. 64-67.
- Yu. Kazarinov, J. W. Stetson, and P. A. Zavodszky, “Possible Scheme of the Analyzing Part of a Cyclotron Injection Beamline with Higher Energy”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE034, pp. 2345-2347.
- S. Tomin, G. Geloni, and M. Scholz, “FEL Optimization: From Model-Free to Model-Dependent Approaches and ML Prospects”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 762-765.
- D. A. Finley, “Calculation of Integrated Luminosity for Beams Stored in the Tevatron Collider”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1834-1837.
- J. Bisognano and M. Fripp, “Requirements for Longitudinal HOM Damping in Superconducting Recirculating Linacs”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-32, pp. 388-390.
- J. Bisognano, “Impedance and Wakefields Beyond Cutoff”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE1-01, pp. 261-266.
- J. Lesrel, S. Bousson, T. Junquera, A. Caruette, and M. Fouaidy, “Study of Thermal Effects in SRF Cavities”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97B12, pp. 374-384.
- E. P. Plawski, S. Kulinski, and M. Wojciechowski, “Five Cell Method of Tuning Biperiodic Linear Standing Wave /2 Accelerating Structures”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP092, pp. 3423-3425.
- A. M. Sessler, “The Electron Ring Accelerator”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper G-2, pp. 606-607.
- B. F. Milton, “A Cyclotron Orbit Code Using Second Order Transfer Matrices”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper G-06, pp. 240-243.
- G. A. Riabov et al., “Some Design Features of the 80 MeV H- Isochronous Cyclotron at Gatchina”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEBOR02, pp. 109-111.
- A. A. Kulakov and P. V. Martyshkin, “VEPP-5 Positron Source Simulations”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP007L, pp. 1466-1468.
- J. Y. Liu, H. B. Chen, A. Grudiev, J. Shi, and H. Zha, “Wakefield Suppression in the Main LINAC of the Klystron-Based First Stage of CLIC at 380 GeV”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2899-2902.
- C. G. Beetham et al., “Conversion of the SPS to a Multicycling Accelerator”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1231-1234.
- S. Dewan et al., “1.12 MVA Peak Two Quadrant Pulse Switch Mode Power Supply for SNS Injection Bump Magnet”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE107, pp. 2460-2462.
- G. P. Jackson and S. D. Howe, “Direct Antiproton Deceleration in the Fermilab Proton Driver”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE023, pp. 1817-1819.
Back to search