Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Bleser et al., “Magnetic Field Measurements on ISABELLE Storage Ring Magnets”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3903-3907.
[n] A. Ratti et al., “The Design and Performance of the Spallation Neutron Source Low-Level RF Control System”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP44, pp. 703-705.
[n] V. Kamerdzhiev et al., “Nondestructive Beam Instrumentation and Electron Cooling Beam Studies at COSY”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD093, pp. 921-923.
[n] S. D?Âbert et al., “Beam Diagnostics using Transition Radiation”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F33, pp. 719-722.
[n] A. Schempp et al., “The Cryring RFQ for Heavy Ion Acceleration”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1231-1234.
[n] C. Gardner et al., “Analysis of Resonance-Driving Imperfections in the AGS Booster”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 979-982.
[n] P. Pipersky et al., “First Undulators for the Advanced Light Source”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1572-1575.
[n] B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
[n] W. B. Sampson, M. Garber, and A. Ghosh, “Quench Propagation and Training in Simulated Superconducting Magnet Windings”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3245-3248.
[n] F. Marti and P. Johnson, “A LabVIEW Based Cyclotron Magnetic Field Mapping System”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-32, pp. 268-271.
[n] J. W. Staples and T. Schenkel, “High-Efficiency Matching Network for RF-Driven Ion Sources”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH014, pp. 2108-2110.
[n] G. Milcinski, M. Plesko, and M. Sekoranja, “Experiences with Advanced CORBA Services”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP005, pp. XX-XX.
[n] R. Wojke et al., “Tailoring of the RF - Properties of a Multichannel Accelerator for the MeV Energies”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-39, pp. 137-139.
[n] G. Huang et al., “LLRF Control for SPX @ APS Demonstration Experiment”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC089, pp. 3491-3493.
[n] A. Peters et al., “Operational Status and Further Enhancements of the HIT Accelerator Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA006, pp. 73-75.
[n] A. Ratti et al., “Results of The SNS Front End Commissioning at Berkeley Lab”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU483, pp. 509-511.
[n] W. T. Weng, I.-H. Chiang, G. A. Smith, and A. Soukas, “The Multiwire Secondary Emission Monitor and the Emittance Measurement of the AGS Beam”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2331-2334.
[n] G. Brown et al., “Operation of PEP in a Low Emittance Mode”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 461-464.
[n] M. Nordby and C. Perkins, “PEP-II Vacuum System Pressure Profile Modeling using EXCEL”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2515-2518.
[n] F. R. Holdener et al., “Test Results of Pre-Production Prototype Distributed Ion Pump Design for the PEP-II Asymmetric B-Factory Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP12, pp. 2064-2066.
[n] L. A. Ahrens et al., “High Intensity Proton Operation at the Brookhaven AGS Accelerator Complex”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 485-488.
[n] S. Koetter, A. Gla?ƒl, B. D. Isbarn, D. Rohde, M. Sommer, and T. Weis, “Evaluation of an Interior Point Method Specialized in Solving Constrained Convex Optimization Problems for Orbit Correction at the Electron Storage Ring at DELTA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3507-3510. doi:10.18429/JACoW-IPAC2018-THPAK114
[n] G. Vismara, “Thhe New Front-end Narrow-band Electronics for the LEP Beam Orbit Measurement System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1548-1551.
[n] P. Mortazavi, J. Keane, S. Sharma, and M. Thomas, “Mechanical Design of SXLS Radio-Frequency Cavity”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 263-266.
[n] W. T. Weng, “The Lattice Design and Tolerance Analysis of the CBA Transport Line”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2463-2466.
[n] J. Nowak, V. Davidson, L. Genova, R. Johnson, and D. Reagan, “A Pulse to Pulse Klystron Diagnosis System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3097-3099.
[n] U. Wienands et al., “The Vacuum System for the PEP II High Energy Ring Straight Sections”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA22, pp. 2129-2131.
[n] R. Rimmer and H. Schwarz, “RF System Design for the PEP-II B Factory”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1882-1885.
[n] F. R. Holdener et al., “Test Results of a Combined Distributed Ion Pump/Non-Evaporable Getter Pump Design Developed as a Proposed Alternative Pumping System for the PEP-II Asymmetric B- Factory Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP20, pp. 2075-2077.
[n] W. Leonhardt et al., “Thermal Management of Magnetic Focussing Horns Used in the Narrow and Broad Band Neutrino Beams at the AGS”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1740-1743.
[n] J. P. Gourber, H. G. Hereward, and S. Myers, “Overlap Knock-Out Effects in the Cern Intersecting Storage Rings (ISR)”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1405-1408.
[n] P. A. Thompson, S. Aronson, J. G. Cottingham, M. Garber, H. Hahn, and W. B. Sampson, “Internal Trim Coils for CBA Superconducting Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3372-3375.
[n] M. Di Giacomo, “Acceptance Tests for the Spiral2 SC Linac RF Power Systems”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI002, pp. 2702-2704.
[n] J. Friedrich et al., “Performance of the GSI HLI-RFQ”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 551-554.
[n] N. K. Mahale and A. Maschke, “Longitudinal Matching Between the LEB and the MEB for the SSC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 389-392.
[n] J. R. Hunt, J. Resta-L?â, C. P. Welsch, and C. Carli, “A New Method for Emittance Reconstruction Using a Scraper in a Dispersive Region of a Low Energy Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 429-432. doi:10.18429/JACoW-IPAC2017-MOPAB127
For LaTeX
Use Complete Form
For BibTeX
References
- E. Bleser et al., “Magnetic Field Measurements on ISABELLE Storage Ring Magnets”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3903-3907.
- A. Ratti et al., “The Design and Performance of the Spallation Neutron Source Low-Level RF Control System”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP44, pp. 703-705.
- V. Kamerdzhiev et al., “Nondestructive Beam Instrumentation and Electron Cooling Beam Studies at COSY”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD093, pp. 921-923.
- S. D?Âbert et al., “Beam Diagnostics using Transition Radiation”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F33, pp. 719-722.
- A. Schempp et al., “The Cryring RFQ for Heavy Ion Acceleration”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1231-1234.
- C. Gardner et al., “Analysis of Resonance-Driving Imperfections in the AGS Booster”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 979-982.
- P. Pipersky et al., “First Undulators for the Advanced Light Source”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1572-1575.
- B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
- W. B. Sampson, M. Garber, and A. Ghosh, “Quench Propagation and Training in Simulated Superconducting Magnet Windings”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3245-3248.
- F. Marti and P. Johnson, “A LabVIEW Based Cyclotron Magnetic Field Mapping System”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-32, pp. 268-271.
- J. W. Staples and T. Schenkel, “High-Efficiency Matching Network for RF-Driven Ion Sources”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH014, pp. 2108-2110.
- G. Milcinski, M. Plesko, and M. Sekoranja, “Experiences with Advanced CORBA Services”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP005, pp. XX-XX.
- R. Wojke et al., “Tailoring of the RF - Properties of a Multichannel Accelerator for the MeV Energies”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-39, pp. 137-139.
- G. Huang et al., “LLRF Control for SPX @ APS Demonstration Experiment”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC089, pp. 3491-3493.
- A. Peters et al., “Operational Status and Further Enhancements of the HIT Accelerator Facility”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA006, pp. 73-75.
- A. Ratti et al., “Results of The SNS Front End Commissioning at Berkeley Lab”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU483, pp. 509-511.
- W. T. Weng, I.-H. Chiang, G. A. Smith, and A. Soukas, “The Multiwire Secondary Emission Monitor and the Emittance Measurement of the AGS Beam”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2331-2334.
- G. Brown et al., “Operation of PEP in a Low Emittance Mode”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 461-464.
- M. Nordby and C. Perkins, “PEP-II Vacuum System Pressure Profile Modeling using EXCEL”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2515-2518.
- F. R. Holdener et al., “Test Results of Pre-Production Prototype Distributed Ion Pump Design for the PEP-II Asymmetric B-Factory Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP12, pp. 2064-2066.
- L. A. Ahrens et al., “High Intensity Proton Operation at the Brookhaven AGS Accelerator Complex”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 485-488.
- S. Koetter, A. Gla?ƒl, B. D. Isbarn, D. Rohde, M. Sommer, and T. Weis, “Evaluation of an Interior Point Method Specialized in Solving Constrained Convex Optimization Problems for Orbit Correction at the Electron Storage Ring at DELTA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3507-3510.
- G. Vismara, “Thhe New Front-end Narrow-band Electronics for the LEP Beam Orbit Measurement System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1548-1551.
- P. Mortazavi, J. Keane, S. Sharma, and M. Thomas, “Mechanical Design of SXLS Radio-Frequency Cavity”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 263-266.
- W. T. Weng, “The Lattice Design and Tolerance Analysis of the CBA Transport Line”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2463-2466.
- J. Nowak, V. Davidson, L. Genova, R. Johnson, and D. Reagan, “A Pulse to Pulse Klystron Diagnosis System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3097-3099.
- U. Wienands et al., “The Vacuum System for the PEP II High Energy Ring Straight Sections”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAA22, pp. 2129-2131.
- R. Rimmer and H. Schwarz, “RF System Design for the PEP-II B Factory”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1882-1885.
- F. R. Holdener et al., “Test Results of a Combined Distributed Ion Pump/Non-Evaporable Getter Pump Design Developed as a Proposed Alternative Pumping System for the PEP-II Asymmetric B- Factory Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP20, pp. 2075-2077.
- W. Leonhardt et al., “Thermal Management of Magnetic Focussing Horns Used in the Narrow and Broad Band Neutrino Beams at the AGS”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1740-1743.
- J. P. Gourber, H. G. Hereward, and S. Myers, “Overlap Knock-Out Effects in the Cern Intersecting Storage Rings (ISR)”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1405-1408.
- P. A. Thompson, S. Aronson, J. G. Cottingham, M. Garber, H. Hahn, and W. B. Sampson, “Internal Trim Coils for CBA Superconducting Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3372-3375.
- M. Di Giacomo, “Acceptance Tests for the Spiral2 SC Linac RF Power Systems”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI002, pp. 2702-2704.
- J. Friedrich et al., “Performance of the GSI HLI-RFQ”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 551-554.
- N. K. Mahale and A. Maschke, “Longitudinal Matching Between the LEB and the MEB for the SSC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 389-392.
- J. R. Hunt, J. Resta-L?â, C. P. Welsch, and C. Carli, “A New Method for Emittance Reconstruction Using a Scraper in a Dispersive Region of a Low Energy Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 429-432.
Back to search