Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Kersevan and L. Goirand, “Upgrade Plans of the Vacuum System of the ESRF”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN011, pp. 164-166.
[n] H. Heydari, “Remarks about the Standard Formula of Beam-Beam Radiation in Electron-Positron Collision”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 954-956.
[n] W. Andreazza et al., “Design of New Beam Instrumentation for the ISOLDE Isotope Separator at CERN”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 205-207. doi:10.18429/JACoW-MEDSI2018-WEPH03
[n] T. Tanikawa et al., “Saturation Phenomena of VUV Coherent Harmonic Generation at UVSOR-II”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper TUPB25, pp. 306-309.
[n] E. S. Metzgar et al., “Summary of the FRIB Electropolishing Facility Design and Commissioning, Cavity Processing, and Cavity Test Results”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 419-424. doi:10.18429/JACoW-SRF2023-TUPTB016
[n] R. Dölling et al., “Status of oscillating arm wire monitor development”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 383-387. doi:10.18429/JACoW-IBIC2025-TUPCO14
[n] D. E. Johnson et al., “Corrections to the Fermilab Recycler Focusing with End Shim Changes”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH055, pp. 2575-2577.
[n] W. L. Huang, F. Li, L. Ma, S. Wang, and T. G. Xu, “Beam Charge Measurement and System Calibration in CSNS”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 122-125. doi:10.18429/JACoW-IBIC2018-MOPC04
[n] J. C. T. Thangaraj and R. Dhuley, “Compact, High-Power Superconducting Electron Linear Accelerators for MW Industrial Applications”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 604-606. doi:10.18429/JACoW-NAPAC2022-WEZE3
[n] M. Dehnel, “INDUSTRIAL BEAMLINE DESIGN FOR RADIOISOTOPE PRODUCTION”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P05, pp. XX-XX.
[n] S. H. Lee et al., “Mechanical Design of a Compact Collinear Wakefield Accelerator”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 276. doi:10.18429/JACoW-MEDSI2020-WEPB05
[n] M. Labat, J. Da Silva, N. Hubert, and F. Lepage, “Photon Beam Imager at SOLEIL”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 425-428. doi:10.18429/JACoW-IBIC2018-WEPB01
[n] S. V. Efimov et al., “The Pulse Stretcher Ring PSR-200. Current Status”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 453-456.
[n] H. L. Rutkowski, “An Induction Linac for the Second Phase of DARHT”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO2001, pp. 21-25.
[n] J. R. Cary, “Longitudinal Cooling of a Strongly Magnetized Electron Plasma”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE040, pp. 2026-2028.
[n] J. C. Dooling, F. R. Brumwell, G. E. McMichael, M. E. Middendorf, and R. A. Zolecki, “Numerical Studies of a Second Harmonic RF Cavity for the IPNS RCS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP8, pp. 2274-2276.
[n] J. Kwan, F. M. Bieniosek, I. Haber, E. Halaxa, J.-L. Vay, and G. Westenskow, “Beam Optics of a 10-cm Diameter High Current Heavy Ion Diode”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB006, pp. 3297-3299.
[n] G. Franchetti et al., “The S317 Experiment on High Intensity Beam Loss and Emittance Growth”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA22, pp. 128-130.
[n] N. M. Cook, R. S. Lefferts, O. Tresca, and V. Yakimenko, “Scintillator Diagnostics for the Detection of Laser Accelerated Ion Beams”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC33, pp. 1208-1210.
[n] M. Major et al., “Materials Science Investigations of Nitrogen-Doped Niobium for SRF Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 99-101. doi:10.18429/JACoW-SRF2019-MOP028
[n] V. Zakutin et al., “Electron Beam Production in Multicathode Secondary-emission Systems”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE120, pp. 1431-1433.
[n] B. R. Poole and J. R. Harris, “Cerenkov Radiator Driven by a Superconducting RF Electron Gun”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP184, pp. 1831-1833.
[n] J. Choinski and P. Gmaj, “Heavy Ion Laboratory, University of Warsaw - a Unique Research Center in Poland”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper FRM2C01, pp. 297-299.
[n] L. Smith, “Linac Focusing”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper C-06, pp. 274-282.
[n] M. Cargnelutti, R. Hrovatin, and G. Jug, “Beam Position Electronics Based on System on Chip Platform”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC04, pp. 1145-1147.
[n] Z. Liu, W. G. Jansma, J. Nudell, and C. A. Preissner, “Validation of APS-U Magnet Support Design Analysis and Prediction”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 89. doi:10.18429/JACoW-MEDSI2020-MOPC16
[n] B. Faatz et al., “Simultaneous Operation of a Multi Beamline FEL Facility”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD32, pp. 301-304.
[n] D. L. Bowring, D. Li, A. Moretti, and Y. Torun, “Analysis of Breakdown Damage in an 805 MHz Pillbox Cavity for Muon Ionization Cooling R&D”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI072, pp. 2857-2859.
[n] R. Kammering and J. Carwardine, “An orbit feedback for the Free Electron Laser in Hamburg (FLASH)”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL015, pp. 58-60.
[n] S. Seletskiy, K. Mernick, L. Nguyen, P. Inacker, and R. Hulsart, “Feedbacks at Low Energy RHIC Electron Cooler”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper TUPCO27, unpublished.
[n] A. V. Higuera and J. R. Cary, “Integrating the Lorentz Force Law for Highly-Relativistic Particle-in-Cell Simulations”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4734-4736. doi:10.18429/JACoW-IPAC2018-THPML042
[n] L. Smith, “Super-Energy Accelerators”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 1042-1045.
[n] E. L. Hubbard, W. B. Hanson, and U. Patel, “Vacuum System for the NAL Booster Synchrotron”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 654-656.
[n] V. N. Litvinenko, B. Burnham, N. Hower, P. Morcombe, and Y. Wu, “Duke Storage Ring Tune Measurements System using Razor Blade and Photomultiplier”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ06, pp. 2461-2463.
[n] B. T. Freemire et al., “High Pressure RF Cavity Test at Fermilab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP032, pp. 160-162.
[n] D. E. Donets et al., “Simulation and Design of Tubular Electron String Ion Source”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper E-02, pp. 321-325.
[n] Y. Jiao, S. Y. Chen, and G. Xu, “Candidate HEPS Lattice Design With Emittances Approaching the Diffraction Limit of Hard X-Rays”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2703-2705. doi:10.18429/JACoW-IPAC2017-WEPAB054
[n] A. Tuzikov et al., “Beam Transfer From Heavy-Ion Linear Accelerator HILAC Into Booster of NICA Accelerator Complex”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 444-446. doi:10.18429/JACoW-RUPAC2016-WEPSB037
[n] B. R. Poole, J. R. Harris, and S. V. Milton, “Photonic Crystal as a Passively Driven Structure to Boost Beam Energy”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC07, pp. 87-89.
[n] A. Burov et al., “Status of High Energy Electron Cooling in FNAL Recycler Ring”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper WEBO02, pp. XX-XX.
[n] A. Schwinn et al., “FESA3 ÔÇô The New Front-End Software Framework at CERN and the FAIR Facility”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WECOAA03, pp. 22-26.
[n] U. Trinks, “The Superconducting Separated-Orbit Cyclotron Tritron (Invited Paper)”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XII-01, pp. 693-700.
[n] L. M. Zheng et al., “Correction of Emittance Growth Due to Quad Components in Solenoids With Quad Correctors at AWA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1536-1538. doi:10.18429/JACoW-IPAC2018-TUPML004
[n] N. J. Walker et al., “Operation of the FLASH Linac with Long Bunch Trains and High Average Current”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP109, pp. 2766-2768.
[n] S. Kawata, Y. Masubuchi, T. Sato, and T. Teramoto, “Development of Two-Dimensional Implosion Code for LIB ICF”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 706-709.
[n] C. Nieter and J. R. Cary, “VORPAL - A Multidimensional Code for Simulating Advanced Acceleration Concepts”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH110, pp. 3105-3107.
[n] N. Solyak et al., “Lorentz Force Detuning Compensation Studies for Long Pulses in ILC type SRF Cavities”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB077, pp. 354-356.
[n] Yu. G. Basargin et al., “103-cm Compact Isochronous Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 102-107.
[n] E. L. Hubbard, “Bevatron Injector Linac II”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 7-02, pp. 240-247.
[n] J. P. Dai, H. Li, L. H. Li, Q. Y. Wang, J. Zhang, and P. Sha, “Surface Processing Facilities for Spoke Cavities at IHEP”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP044, pp. 508-510.
[n] N. V. Avreline, W. Gyles, and R. L. Watt, “Methods of Increasing Accuracy in Precision Magnetic Field Measurements of Cyclotron Magnets”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU4PB04, pp. 283-285.
[n] W. Mansour, P. Fajardo, and N. Janvier, “High Performance RDMA-Based Daq Platform Over PCIe Routable Network”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1131-1136. doi:10.18429/JACoW-ICALEPCS2017-THBPL06
[n] A. Yu. Zelinsky, I. M. Karnaukhov, and A. A. Shcherbakov, “A Polarized Electron Beam in the Pulse Stretcher Ring PSR-2000”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 688-691.
[n] E. Hoyer, J. Chin, and W. V. Hassenzahl, “Flux Shunts for Undulators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1584-1587.
[n] M. M. Faber, C. W. Potts, and R. A. Zolecki, “Operating Experience with the Resonance Extraction Slow Spill Control System at the Zero Gradient Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1437-1440.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Kersevan and L. Goirand, “Upgrade Plans of the Vacuum System of the ESRF”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN011, pp. 164-166.
- H. Heydari, “Remarks about the Standard Formula of Beam-Beam Radiation in Electron-Positron Collision”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 954-956.
- W. Andreazza et al., “Design of New Beam Instrumentation for the ISOLDE Isotope Separator at CERN”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 205-207.
- T. Tanikawa et al., “Saturation Phenomena of VUV Coherent Harmonic Generation at UVSOR-II”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper TUPB25, pp. 306-309.
- E. S. Metzgar et al., “Summary of the FRIB Electropolishing Facility Design and Commissioning, Cavity Processing, and Cavity Test Results”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB016, pp. 419-424.
- R. Dölling et al., “Status of oscillating arm wire monitor development”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 383-387.
- D. E. Johnson et al., “Corrections to the Fermilab Recycler Focusing with End Shim Changes”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH055, pp. 2575-2577.
- W. L. Huang, F. Li, L. Ma, S. Wang, and T. G. Xu, “Beam Charge Measurement and System Calibration in CSNS”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 122-125.
- J. C. T. Thangaraj and R. Dhuley, “Compact, High-Power Superconducting Electron Linear Accelerators for MW Industrial Applications”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 604-606.
- M. Dehnel, “INDUSTRIAL BEAMLINE DESIGN FOR RADIOISOTOPE PRODUCTION”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P05, pp. XX-XX.
- S. H. Lee et al., “Mechanical Design of a Compact Collinear Wakefield Accelerator”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 276.
- M. Labat, J. Da Silva, N. Hubert, and F. Lepage, “Photon Beam Imager at SOLEIL”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 425-428.
- S. V. Efimov et al., “The Pulse Stretcher Ring PSR-200. Current Status”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 453-456.
- H. L. Rutkowski, “An Induction Linac for the Second Phase of DARHT”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO2001, pp. 21-25.
- J. R. Cary, “Longitudinal Cooling of a Strongly Magnetized Electron Plasma”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE040, pp. 2026-2028.
- J. C. Dooling, F. R. Brumwell, G. E. McMichael, M. E. Middendorf, and R. A. Zolecki, “Numerical Studies of a Second Harmonic RF Cavity for the IPNS RCS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP8, pp. 2274-2276.
- J. Kwan, F. M. Bieniosek, I. Haber, E. Halaxa, J.-L. Vay, and G. Westenskow, “Beam Optics of a 10-cm Diameter High Current Heavy Ion Diode”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB006, pp. 3297-3299.
- G. Franchetti et al., “The S317 Experiment on High Intensity Beam Loss and Emittance Growth”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA22, pp. 128-130.
- N. M. Cook, R. S. Lefferts, O. Tresca, and V. Yakimenko, “Scintillator Diagnostics for the Detection of Laser Accelerated Ion Beams”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC33, pp. 1208-1210.
- M. Major et al., “Materials Science Investigations of Nitrogen-Doped Niobium for SRF Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 99-101.
- V. Zakutin et al., “Electron Beam Production in Multicathode Secondary-emission Systems”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE120, pp. 1431-1433.
- B. R. Poole and J. R. Harris, “Cerenkov Radiator Driven by a Superconducting RF Electron Gun”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP184, pp. 1831-1833.
- J. Choinski and P. Gmaj, “Heavy Ion Laboratory, University of Warsaw - a Unique Research Center in Poland”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper FRM2C01, pp. 297-299.
- L. Smith, “Linac Focusing”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper C-06, pp. 274-282.
- M. Cargnelutti, R. Hrovatin, and G. Jug, “Beam Position Electronics Based on System on Chip Platform”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC04, pp. 1145-1147.
- Z. Liu, W. G. Jansma, J. Nudell, and C. A. Preissner, “Validation of APS-U Magnet Support Design Analysis and Prediction”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 89.
- B. Faatz et al., “Simultaneous Operation of a Multi Beamline FEL Facility”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUPD32, pp. 301-304.
- D. L. Bowring, D. Li, A. Moretti, and Y. Torun, “Analysis of Breakdown Damage in an 805 MHz Pillbox Cavity for Muon Ionization Cooling R&D”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI072, pp. 2857-2859.
- R. Kammering and J. Carwardine, “An orbit feedback for the Free Electron Laser in Hamburg (FLASH)”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL015, pp. 58-60.
- S. Seletskiy, K. Mernick, L. Nguyen, P. Inacker, and R. Hulsart, “Feedbacks at Low Energy RHIC Electron Cooler”, presented at the 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, paper TUPCO27, unpublished.
- A. V. Higuera and J. R. Cary, “Integrating the Lorentz Force Law for Highly-Relativistic Particle-in-Cell Simulations”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4734-4736.
- L. Smith, “Super-Energy Accelerators”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 1042-1045.
- E. L. Hubbard, W. B. Hanson, and U. Patel, “Vacuum System for the NAL Booster Synchrotron”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 654-656.
- V. N. Litvinenko, B. Burnham, N. Hower, P. Morcombe, and Y. Wu, “Duke Storage Ring Tune Measurements System using Razor Blade and Photomultiplier”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ06, pp. 2461-2463.
- B. T. Freemire et al., “High Pressure RF Cavity Test at Fermilab”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP032, pp. 160-162.
- D. E. Donets et al., “Simulation and Design of Tubular Electron String Ion Source”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper E-02, pp. 321-325.
- Y. Jiao, S. Y. Chen, and G. Xu, “Candidate HEPS Lattice Design With Emittances Approaching the Diffraction Limit of Hard X-Rays”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2703-2705.
- A. Tuzikov et al., “Beam Transfer From Heavy-Ion Linear Accelerator HILAC Into Booster of NICA Accelerator Complex”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 444-446.
- B. R. Poole, J. R. Harris, and S. V. Milton, “Photonic Crystal as a Passively Driven Structure to Boost Beam Energy”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC07, pp. 87-89.
- A. Burov et al., “Status of High Energy Electron Cooling in FNAL Recycler Ring”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper WEBO02, pp. XX-XX.
- A. Schwinn et al., “FESA3 ÔÇô The New Front-End Software Framework at CERN and the FAIR Facility”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WECOAA03, pp. 22-26.
- U. Trinks, “The Superconducting Separated-Orbit Cyclotron Tritron (Invited Paper)”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XII-01, pp. 693-700.
- L. M. Zheng et al., “Correction of Emittance Growth Due to Quad Components in Solenoids With Quad Correctors at AWA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1536-1538.
- N. J. Walker et al., “Operation of the FLASH Linac with Long Bunch Trains and High Average Current”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP109, pp. 2766-2768.
- S. Kawata, Y. Masubuchi, T. Sato, and T. Teramoto, “Development of Two-Dimensional Implosion Code for LIB ICF”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 706-709.
- C. Nieter and J. R. Cary, “VORPAL - A Multidimensional Code for Simulating Advanced Acceleration Concepts”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH110, pp. 3105-3107.
- N. Solyak et al., “Lorentz Force Detuning Compensation Studies for Long Pulses in ILC type SRF Cavities”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB077, pp. 354-356.
- Yu. G. Basargin et al., “103-cm Compact Isochronous Cyclotron”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 102-107.
- E. L. Hubbard, “Bevatron Injector Linac II”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 7-02, pp. 240-247.
- J. P. Dai, H. Li, L. H. Li, Q. Y. Wang, J. Zhang, and P. Sha, “Surface Processing Facilities for Spoke Cavities at IHEP”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP044, pp. 508-510.
- N. V. Avreline, W. Gyles, and R. L. Watt, “Methods of Increasing Accuracy in Precision Magnetic Field Measurements of Cyclotron Magnets”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TU4PB04, pp. 283-285.
- W. Mansour, P. Fajardo, and N. Janvier, “High Performance RDMA-Based Daq Platform Over PCIe Routable Network”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1131-1136.
- A. Yu. Zelinsky, I. M. Karnaukhov, and A. A. Shcherbakov, “A Polarized Electron Beam in the Pulse Stretcher Ring PSR-2000”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 688-691.
- E. Hoyer, J. Chin, and W. V. Hassenzahl, “Flux Shunts for Undulators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1584-1587.
- M. M. Faber, C. W. Potts, and R. A. Zolecki, “Operating Experience with the Resonance Extraction Slow Spill Control System at the Zero Gradient Synchrotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1437-1440.
Back to search