Warning
Some papers have malformed authors, please correct this before using these references.
Favourites
For Word
[n] F. M. Velotti et al., “Observations of SPS Slow-Extracted Spill Quality Degradation and Possible Improvements”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 761-764. doi:10.18429/JACoW-IPAC2018-TUPAF035
[n] D. C. Larbalestier, “Superconducting Materials for Particle Accelerator Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3299-3304.
[n] Young-hwan Kim, Hyeok-jung Kwon, Yong-hwan Kim, Han-sung Kim, Sang-ho Kim,
Kang-ok Lee, Kie-hyung Chung,
Department of Nuclear Engineering, Seoul National University, Seoul, Korea, “Design of Radially Focused Uniform X-Ray Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP138, pp. 2561-2563.
[n] J. Y. Li, W. Li, G. Liu, W. Xu, and Y. Li, “Reducing HLS-II Emittance by Radiation Damping Partition Factor Exchange”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO063, pp. 2009-2011.
[n] J. H. Wang et al., “Bunch-by-Bunch Online Diagnostics at HLS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC138, pp. 3309-3311.
[n] D. Trbojevic, D. Finley, R. Gerig, and S. Holmes, “Design Method for High Energy Accelerator Without Transition Energy”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1536-1539.
[n] A. Miura, J. Tamura, Y. Liu, and T. Miyao, “Bunch Shape Monitor Development in J-PARC Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 271-273. doi:10.18429/JACoW-IPAC2017-MOPAB068
[n] C. Y. Wu, J. Chen, Y.-S. Cheng, K. T. Hsu, D. Lee, and C. Y. Liao, “Control System of EPU48 in TPS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3180-3182. doi:10.18429/JACoW-IPAC2014-THPRO123
[n] R. Chehab et al., “Experimental Determination of The Positron Source Emittance for A Crystal Target”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO452, pp. 160-162.
[n] V. Baglin et al., “The Secondary Electron Yield of Technical Materials and its Variaton with Surface Treatments”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THXF102, pp. 217-221.
[n] K. Mizushima et al., “Beam Spot Measurement using a Phosphor Screen for Carbon-Ion Therapy at NIRS”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB78, pp. 256-258.
[n] Y. Papaphilippou and Ch. Skokos, “Non Linear Dynamics Study of the CLIC Damping Rings Using Sympletic Integrators”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP061, pp. 682-684.
[n] N. Eddy et al., “High Resolution BPM Upgrade for the ATF Damping Ring at KEK”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD11, pp. 59-61.
[n] M. Pekeler et al., “Fabrication, Test and First Operation of Superconducting Accelerator Modules for Storage Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB090, pp. 1410-1412.
[n] Y. Alexahin, “Circularly Inclined Solenoid Channel for 6D Ionization Cooling of Muons”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU3PBC04, pp. 727-729.
[n] B. Henrist, V. Baglin, G. Bregliozzi, and P. Chiggiato, “The LHC Vacuum Pilot Sectors Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2360-2362. doi:10.18429/JACoW-IPAC2014-WEPME042
[n] L. Ceccone and V. Montabonnet, “Four Quadrant 60 A, 8 V Power Converters for LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP126, pp. 3655-3657.
[n] V. Andreev et al., “Experimental Results on the Stainless Steel Prototype of a Superconducting RFQ”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP28G, pp. 1840-1842.
[n] Y. Sun, “A Compact Ring Design with Tunable Momentum Compaction”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOEPPB004, pp. 82-84.
[n] P. McIntyre, A. McInturff, and A. Sattarov, “The Tevatron Tripler -- Magnet Design and Lattice Issues”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH315, pp. 3639-3641.
[n] B. P. Xiao et al., “Cryogenic Test of Double Quarter Wave Crab Cavity for the LHC High Luminosity Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3630-3633. doi:10.18429/JACoW-IPAC2015-WEPWI060
[n] X. Zhao et al., “Materials Analysis of CED Nb Films Being Coated on Bulk Nb Single Cell SRF Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP082, pp. 638-641.
[n] W. Wang, X. Y. He, P. Wang, S. F. Xu, and Q. Y. Yao, “The Surveying Data Processing of Control Network based on HLS Upgrade”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME025, pp. 2986-2988.
[n] J. E. Spencer et al., “Fast Neutron Radioactivity and Damage Studies on Materials”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS066, pp. 581-583.
[n] R. N. Xu, C. L. Guo, D. M. Li, R. Li, S. Tan, and W. F. Wu, “Digital Power Supply Controller Development Based on FPGA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA019, pp. 702-704.
[n] A. Blas, S. S. Gilardoni, and G. Sterbini, “Beam Tests and Plans for the CERN PS Transverse Damper System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME011, pp. 2947-2949.
[n] D. Einfeld et al., “Modelling of Gradient Bending Magnets for the Beam Dynamics Studies at ALBA”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN068, pp. 1076-1078.
[n] Y. Cai et al., “A Baseline Design for PEP-X: an Ultra-low Emittance Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA074, pp. 2657-2659.
[n] Y. Alexahin, E. Gianfelice-Wendt, and W. L. Marsh, “Tune Evaluation from Phased BPM Turn-by-turn Data”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE084, pp. 1179-1181.
[n] L. Isaksson, E. Mansten, and S. Thorin, “MAX IV Online Linac Model”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4047-4049. doi:10.18429/JACoW-IPAC2017-THPAB140
[n] J. Snuverink, J. Barranco, H. Garcia, Y. I. Levinsen, D. Schulte, and R. Tomas, “CLIC Final Focus System Alignment and Magnet Tolerances”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME051, pp. 1682-1684.
[n] Y. Irie et al., “Wideband Low-output Impedance RF System for the ISIS Second Harmonic Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC063, pp. 609-611.
[n] Y. J. Pei et al., “Status of 200 MeV Electron Linac and Its Application”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4023, pp. 442-444.
[n] J. Guo, J. D. Fox, T. Mastoridis, R. A. Rimmer, H. Wang, and S. Wang, “Transient Beam Loading and Mitigation in JLEIC Collider Rings”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 758-761. doi:10.18429/JACoW-IPAC2019-MOPRB080
[n] J. Lorkiewicz et al., “Upgrading Programme of the C-30 Cyclotron at Swierk and its User for Experimental Physics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 542-545.
[n] G. Feng, Y. Hong, Y. J. Pei, and X. Wang, “Design of a 200keV High Pulse Current Electron Beam Facility”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN042, pp. 2811-2813.
For LaTeX
Use Complete Form
For BibTeX
References
- F. M. Velotti et al., “Observations of SPS Slow-Extracted Spill Quality Degradation and Possible Improvements”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 761-764.
- D. C. Larbalestier, “Superconducting Materials for Particle Accelerator Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3299-3304.
- Young-hwan Kim, Hyeok-jung Kwon, Yong-hwan Kim, Han-sung Kim, Sang-ho Kim,
Kang-ok Lee, Kie-hyung Chung,
Department of Nuclear Engineering, Seoul National University, Seoul, Korea, “Design of Radially Focused Uniform X-Ray Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP138, pp. 2561-2563.
- J. Y. Li, W. Li, G. Liu, W. Xu, and Y. Li, “Reducing HLS-II Emittance by Radiation Damping Partition Factor Exchange”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO063, pp. 2009-2011.
- J. H. Wang et al., “Bunch-by-Bunch Online Diagnostics at HLS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC138, pp. 3309-3311.
- D. Trbojevic, D. Finley, R. Gerig, and S. Holmes, “Design Method for High Energy Accelerator Without Transition Energy”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1536-1539.
- A. Miura, J. Tamura, Y. Liu, and T. Miyao, “Bunch Shape Monitor Development in J-PARC Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 271-273.
- C. Y. Wu, J. Chen, Y.-S. Cheng, K. T. Hsu, D. Lee, and C. Y. Liao, “Control System of EPU48 in TPS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3180-3182.
- R. Chehab et al., “Experimental Determination of The Positron Source Emittance for A Crystal Target”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO452, pp. 160-162.
- V. Baglin et al., “The Secondary Electron Yield of Technical Materials and its Variaton with Surface Treatments”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THXF102, pp. 217-221.
- K. Mizushima et al., “Beam Spot Measurement using a Phosphor Screen for Carbon-Ion Therapy at NIRS”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPB78, pp. 256-258.
- Y. Papaphilippou and Ch. Skokos, “Non Linear Dynamics Study of the CLIC Damping Rings Using Sympletic Integrators”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP061, pp. 682-684.
- N. Eddy et al., “High Resolution BPM Upgrade for the ATF Damping Ring at KEK”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD11, pp. 59-61.
- M. Pekeler et al., “Fabrication, Test and First Operation of Superconducting Accelerator Modules for Storage Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB090, pp. 1410-1412.
- Y. Alexahin, “Circularly Inclined Solenoid Channel for 6D Ionization Cooling of Muons”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU3PBC04, pp. 727-729.
- B. Henrist, V. Baglin, G. Bregliozzi, and P. Chiggiato, “The LHC Vacuum Pilot Sectors Project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2360-2362.
- L. Ceccone and V. Montabonnet, “Four Quadrant 60 A, 8 V Power Converters for LHC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP126, pp. 3655-3657.
- V. Andreev et al., “Experimental Results on the Stainless Steel Prototype of a Superconducting RFQ”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP28G, pp. 1840-1842.
- Y. Sun, “A Compact Ring Design with Tunable Momentum Compaction”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOEPPB004, pp. 82-84.
- P. McIntyre, A. McInturff, and A. Sattarov, “The Tevatron Tripler -- Magnet Design and Lattice Issues”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH315, pp. 3639-3641.
- B. P. Xiao et al., “Cryogenic Test of Double Quarter Wave Crab Cavity for the LHC High Luminosity Upgrade”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3630-3633.
- X. Zhao et al., “Materials Analysis of CED Nb Films Being Coated on Bulk Nb Single Cell SRF Cavities”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP082, pp. 638-641.
- W. Wang, X. Y. He, P. Wang, S. F. Xu, and Q. Y. Yao, “The Surveying Data Processing of Control Network based on HLS Upgrade”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME025, pp. 2986-2988.
- J. E. Spencer et al., “Fast Neutron Radioactivity and Damage Studies on Materials”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS066, pp. 581-583.
- R. N. Xu, C. L. Guo, D. M. Li, R. Li, S. Tan, and W. F. Wu, “Digital Power Supply Controller Development Based on FPGA”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA019, pp. 702-704.
- A. Blas, S. S. Gilardoni, and G. Sterbini, “Beam Tests and Plans for the CERN PS Transverse Damper System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME011, pp. 2947-2949.
- D. Einfeld et al., “Modelling of Gradient Bending Magnets for the Beam Dynamics Studies at ALBA”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN068, pp. 1076-1078.
- Y. Cai et al., “A Baseline Design for PEP-X: an Ultra-low Emittance Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA074, pp. 2657-2659.
- Y. Alexahin, E. Gianfelice-Wendt, and W. L. Marsh, “Tune Evaluation from Phased BPM Turn-by-turn Data”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE084, pp. 1179-1181.
- L. Isaksson, E. Mansten, and S. Thorin, “MAX IV Online Linac Model”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4047-4049.
- J. Snuverink, J. Barranco, H. Garcia, Y. I. Levinsen, D. Schulte, and R. Tomas, “CLIC Final Focus System Alignment and Magnet Tolerances”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME051, pp. 1682-1684.
- Y. Irie et al., “Wideband Low-output Impedance RF System for the ISIS Second Harmonic Cavity”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC063, pp. 609-611.
- Y. J. Pei et al., “Status of 200 MeV Electron Linac and Its Application”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4023, pp. 442-444.
- J. Guo, J. D. Fox, T. Mastoridis, R. A. Rimmer, H. Wang, and S. Wang, “Transient Beam Loading and Mitigation in JLEIC Collider Rings”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 758-761.
- J. Lorkiewicz et al., “Upgrading Programme of the C-30 Cyclotron at Swierk and its User for Experimental Physics”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 542-545.
- G. Feng, Y. Hong, Y. J. Pei, and X. Wang, “Design of a 200keV High Pulse Current Electron Beam Facility”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN042, pp. 2811-2813.
Back to search