Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Peschke, U. Jandewerth, F. Nolden, P. Petri, and M. Steck, “Prototype Pick-up Module for CR Stochastic Cooling at FAIR”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper THPMCP003, pp. 130-133.
[n] P. N. Ostroumov et al., “Completion of Efficiency and Intensity Upgrade of the ATLAS Facility”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP005, pp. 449-451.
[n] M. Bahte, F. C. Herrmann, and P. Schm??ser, “Magnetization and Susceptibility Measurements on Niobium Samples for Cavity Production”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D10, pp. 881-889.
[n] M. Pojer et al., “LHC Operational Experience of the 6.5 TeV Proton Run with ATS Optics”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 216-219. doi:10.18429/JACoW-IPAC2018-MOPMF050
[n] D. Rifuggiato, L. Calabretta, P. Gmaj, and G. Bellomo, “Analysis of the Final Magnetic Measurements of the L.N.S. Superconducting Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-19, pp. 241-244.
[n] M. P. Sangroula, R. M. Lill, R. R. Lindberg, and R. B. Zabel, “Measuring the Coupling Impedance of Vacuum Components for the Advanced Photon Source Upgrade Using a Goubau Line”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3211-3214. doi:10.18429/JACoW-IPAC2018-THPAK005
[n] G. Stange, “A New Type of Pulsed Air-Core Multipoles of Simple Construction”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2829-2832.
[n] S. A. Perezhogin, M. I. Ayzatsky, and K. Yu. Kramarenko, “Beam Loading the Standing Wave Injector on the Base of Evanescent Wave”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI068, pp. 1652-1654.
[n] S. A. Perezhogin et al., “Test Results of Injector Based on Resonance System with Evanescent Oscillations”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT133, pp. 1437-1439.
[n] V. I. Bobylev, “Operation of the Linac-Injector Modulator into a Mismatched Load”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P03, pp. 314-317.
[n] O. Marcouill?® et al., “W164: A Wiggler Dedicated to the PUMA Beamline and the FEMTOSLICING Project at SOLEIL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1998-2000. doi:10.18429/JACoW-IPAC2014-WEPRO027
[n] S. Asaoka, G. Isoyama, A. Mikuni, Y. Miyahara, and H. Nishimura, “Bunch Lengthening in SOR”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2663-2666.
[n] Y. L. Zhang, D. P. Jin, and P. Zhu, “The Fast Protection System for CSNS Accelerator”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 593-595. doi:10.18429/JACoW-ICALEPCS2021-WEBR03
[n] A. Roy et al., “High Power Microwave Generation From Coaxial Virtual Cathode Oscillator”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA144, pp. 523-525.
[n] C. A. Brau, H. L. Andrews, C. H. Boulware, and J. D. Jarvis, “Gain and Coherent Radiation from a Smith-Purcell Free-Electron Laser”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS60, pp. XX-XX.
[n] J. Riedel and J. Vincent, “The RF Systems of the MSU K500 and K800 Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper H05, pp. 315-316.
[n] M. Killenberg, M. Hierholzer, Ch. Schmidt, S. Marsching, and J. Wychowaniak, “Integrating Control Applications into Different Control Systems”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 581-584. doi:10.18429/JACoW-ICALEPCS2015-TUD3O05
[n] P. Bastl et al., “Hardware Architecture of the ELI Beamlines Control and DAQ System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 2000-2006. doi:10.18429/JACoW-ICALEPCS2017-FRAPL05
[n] V. V. Danilov et al., “The Concept of Round Colliding Beams”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP007L, pp. 1149-1151.
[n] H. W. Isch, “Realization of the LEP Power Converters”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1166-1169.
[n] D. Reschke, G. M??ller, H. Piel, J. Pouryamout, and R. W. R?Âth, “Accelerating Gradients Above 15MV/m in 3GHz Nine -Cell Structures”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I53, pp. XX-XX.
[n] S. Wurtele and M. Sessler, “Transverse Instability in a 50GeV x 50GeV Muon Collider Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP45, pp. 3056-3058.
[n] W. M. Fawley, K.-J. Kim, R. R. Lindberg, and Yu. Shvyd, “XFEL Oscillator Simulation Including Angle-Dependent Crystal Reflectivity”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper TUPA12, pp. 234-237.
[n] M. A. Jebramcik and J. M. Jowett, “Prospects for Future Asymmetric Collisions in the LHC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 484-487. doi:10.18429/JACoW-IPAC2019-MOPMP024
[n] B. Vosicki and K. Zankel, “The Sodium Curtain Beam Profile Monitor of the ISR”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1475-1479.
[n] E. A. Nanni et al., “Design of a Field-Emission X-Band Gun Driven by Solid-State RF Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4399-4402. doi:10.18429/JACoW-IPAC2017-THPIK126
[n] P. Schoessow et al., “The Argonne Wakefield Accelerator High Current Photocathode Gun and Drive Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB11, pp. 976-978.
[n] J. F. Amundson, P. Spentzouris, and E. G. Stern, “Space Charge Simulations for the Mu2e Experiment at Fermilab”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP017, pp. 3226-3226.
[n] S. A. Gavrilov, P. I. Reinhardt-Nickoulin, and A. I. Titov, “2D Non-Destructive Transverse Diagnostics by Beam Cross-section Monitor”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 393-395. doi:10.18429/JACoW-IBIC2017-WEPCC17
[n] M.-E. Couprie et al., “The ARC-EN-CIEL Fourth Generation Light Source Proposal”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH066, pp. 131-134.
[n] J. Y. Zhai et al., “IHEP 1.3 GHz Low Loss Large Grain 9-cell Cavity Fabrication, Processing and Test”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP073, pp. 305-307.
[n] A. I. Papash, A. V. Smirnov, and C. P. Welsch, “Ion Kinetics in the Ultra-low Energy Electrostatic Storage Ring (USR)”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper WECOA01, pp. 89-91.
[n] M. Akemoto, S. Gold, A. Krasnykh, and R. Koontz, “Design of a PFN for the NLC Klystron Pulse Modulator”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D038, pp. 175-177.
[n] E. Acerbi, G. Bellomo, L. Rossi, S. Zhou, and P. Gmaj, “The Magnetic Field Measurements of the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G2-07, pp. 486-489.
[n] A. Slivin et al., “Commissioning of the SOCHI Applied Station Beam and Beam Transfer Line at the NICA Accelerator Complex”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3099-3101. doi:10.18429/JACoW-IPAC2022-THPOMS055
[n] P. Boehler et al., “Experience With the Commissioning of the U15-Undulator for SwissFEL-Aramis Beamline and New Developments for the Athos Beamline”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 283-287. doi:10.18429/JACoW-MEDSI2016-WECA03
[n] J. L. Gonzalez, T. B. Bogey, C. Deplano, and J.-J. Savioz, “Development of a High Dynamic Range Beam Position Measurement System Using Logarithmic Amplifiers for the SPS at CERN”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC18, pp. 89-92.
[n] M. Veronese et al., “A Nanofabricated Wirescanner: Design, Fabrication and Experimental Results”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 314-317. doi:10.18429/JACoW-IBIC2017-WE2AB3
[n] M. P. Sangroula, R. M. Lill, R. R. Lindberg, and X. Sun, “Impedance Measurement of Vacuum Chamber Components for the Advance Photon Source (APS) Upgrade”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3583-3586. doi:10.18429/JACoW-IPAC2017-WEPVA134
[n] A. Sato et al., “Six-sector FFAG Ring to Demonstrate Bunch Rotation for PRISM”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP007, pp. 3389-3391.
[n] E. A. Startsev, R. C. Davidson, W. W. Lee, and H. Qin, “Nonlinear δ F Simulation Studies of Intense Charged Particle Beams with Large Pressure Anisotropy”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH100, pp. 3081-3083.
[n] M. Kelly et al., “Installation and commissioning of the APS-U bunch lengthening system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2713-2716. doi:10.18429/JACoW-IPAC2024-WEPS10
[n] C. H. Rode, R. Ferry, T. Lincicome, J. Makara, J. Theilacker, and R. Walker, “Operation of the Tevatron Six-Kilometer-Long Transfer Line”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2769-2772.
[n] T.-Y. Lee, “Status of PLSII Operation”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1223-1225. doi:10.18429/JACoW-NAPAC2016-THPOA60
[n] J. P. Girardeau-Montaut et al., “New Electron Source Assisted by Two Lasers”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1041-1044.
[n] C. A. Kitegi et al., “Status of the HITRAP Decelerator Linac at GSI”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT027, pp. 1201-1203.
[n] W. Li et al., “New insertion device control system for the APS upgrade”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1394-1397. doi:10.18429/JACoW-IPAC2024-TUPG61
[n] S. Biri, J. P?ílink?ís, and A. Valek, “Heavy Ion Facility in ATOMKI”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-20, pp. 99-101.
[n] S. P. Antipov et al., “X-Ray and Charged Particle Detection by Detuning of a Microwave Resonator”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 503-505. doi:10.18429/JACoW-NAPAC2019-TUPLH08
[n] S. Appel, O. Boine-Frankenheim, and T. Weiland, “Simulation and Observation of the Space Charge Induced Multi-Stream Instability of LinacBunches in the SIS18 Synchrotron”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD002, pp. 1916-1918.
[n] H. Stechemesser et al., “Cosy Vacuum System and Remote Operation Elements”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1329-1332.
[n] G. Hemmie, “Status of the DESY II Project”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 851-854.
[n] S.-H. Lee, D. E. Kim, S. Sasaki, I. Vasserman, and D. R. Walters, “Magnetic Properties of Undulator Vacuum Chamber Materials for the Linac Coherent Light Source”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUOC003, pp. XX-XX.
[n] M. Kim, S. M. Ammons, B. Hackel, and L. Poyneer, “Processing System Design for Implementing a Linear Quadratic Gaussian (LQG) Controller to Optimize the Real-Time Correction of High Wind-Blown Turbulence”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 762. doi:10.18429/JACoW-ICALEPCS2019-TUCPL02
[n] G. G. Gulbekyan et al., “The Project of the HV Axial Injection for the DC-280 Cyclotron at the FLNR JINR”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC08, pp. 333-335.
[n] M. E. Toms and T. F. Godlove, “Positron Production with the USNRL Linac”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 462-465.
[n] A. I. Muminov, I. N. Konovalov, B. G. Kurganov, and A. U. Usmonov, “A Semi-Automatic System for Radioisotope Production”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper K-11, pp. 568-570.
[n] M. Yudelev, J. Burmeister, E. Blosser, R. L. Maughan, and C. Kota, “Hospital Based Superconducting Cyclotron for Neutron Therapy: Medical Physics Perspective”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-14, pp. XX-XX.
[n] L. Ives, J. Neilson, and W. Vogler, “CASCADE - An Advanced Computational Tool for Waveguide Component and Window Design”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPB003, pp. 269-271.
[n] A. P. Sumbaev, A. M. Barnyakov, and A. E. Levichev, “About the Limits for the Accelerated Beam Current in the LUE-200 Linac of the IREN Facility”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 320-322. doi:10.18429/JACoW-LINAC2018-TUPO001
[n] J. Huguenin, R. Dubois, R. El-Bez, and G. Visconti, “The New 500 keV Single-Gap Pre-injector Tube for the CERN Proton Synchrotron Linac”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VII-02, pp. 355-364.
[n] A. Sledneva, V. Aleksandrov, and V. V. Kobets, “Calculation of Electron Beam Dynamics in Four Accelerating Stations for JINR Linear Electron Accelerator LINAC-200”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 566-568. doi:10.18429/JACoW-LINAC2018-TUPO112
[n] N. Majernik et al., “Arbitrary Longitudinal Pulse Shaping with a Multi-Leaf Collimator and Emittance Exchange”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1600-1603. doi:10.18429/JACoW-IPAC2021-TUPAB095
[n] M. Odera and M. Hemmi, “Accelerating Structure with Chain-Like Electrode Configuration”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0009, pp. 346-348.
[n] J. Fang, P. Li, P. Lu, Q. Luo, B. Sun, and X. H. Wang, “Calibration of Quadrupole Component of Beam Position Monitor at HLS LINAC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP054, pp. 4075-4077.
[n] M. Romagnoni, “Future Prospective for Bent Crystals in Accelerators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3545-3547. doi:10.18429/JACoW-IPAC2021-WEPAB360
[n] T. Hara et al., “Multi-beamline Operation Test at SACLA”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 293-296. doi:10.18429/JACoW-FEL2015-TUA03
[n] G. H. Luo et al., “The Status of Top-up Injection at NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUM104, pp. XX-XX.
[n] S. Y. Lee and X. F. Zhao, “Microwave Instabilities in Booster and AGS”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1188-1190.
[n] A. S. Dhavale and K. C. Mittal, “Evaluation of External Q Using Kroll-Yu Method With Microwaves Studio”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA133, pp. 503-505.
[n] P. C. Chiu, J. Chen, Y. K. Chen, K. T. Hsu, K. H. Hu, and C. H. Kuo, “Injection Efficiency Diagnostic at TLS Storage Ring”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD67, pp. 461-463.
[n] A. Chapman-Hatchett, A. Jansson, and D. J. Williams, “A Magnetic Quadrupole Pick-Up for the CERN PS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA154, pp. 2223-2225.
[n] M. J. Bland, J. Clare, and P. W. Wheeler, “Multiphase Resonant Power Converter for High Energy Physics Applications”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS122, pp. 2658-2660.
[n] M. F. Fernandes, J. Tan, and C. P. Welsch, “Cryogenic Current Comparator as Low Intensity Beam Current Monitor in the CERN Antiproton Decelerators”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF25, pp. 267-270.
[n] V. Talanov, D. C. Kiselev, and M. Wohlmuther, “Numerical Estimation of the Equivalent Dose Rate after the Irradiation of a Tungsten Collimator by a Low Energy Proton Beam”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 890-892. doi:10.18429/JACoW-IPAC2014-MOPRI114
[n] B. S. K. Srivastava and P. Fatnani, “Comprehensive Machine Status Monitoring and Information Services Using Web Technology”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_081.
[n] H. Henke, “Transverse Damping in a 30 GHZ Very High Energy Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1346-1349.
[n] S. Ghatak, A. S. Dhavale, N. Gupta, and K. C. Mittal, “A Kinetic Model of Multipaction for SRF Cavities for Accelerator Driven Sub-Critical System (ADSS)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP090, pp. 1741-1743.
[n] T. Yokoi, K. J. Peach, and H. Witte, “Beam Extraction of PAMELA NS-FFAG”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC048, pp. 567-569.
[n] M. L. Neubauer, A. Dudas, and F. Marhauser, “Using Conductive Nanoparticles to Reduce the Surface Charging of Ceramics”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4392-4394. doi:10.18429/JACoW-IPAC2017-THPIK124
[n] P. H, W. F. O. M, H. Klein, U. van Rienen, and T. Weiland, “The 36-Cell Structure - Calculations and Experiments”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3W003, pp. 524-526.
[n] J. M. Bassaler and H. Baudrand, “Calculation of the Resonance Frequencies of the Rhodotron Cavity using Green Function”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 898-901.
[n] J.-P. Bojon, O. Groebner, J.-M. Laurent, and P. M. Stubin, “Experience with the Operation of the LEP Vacuum System and its Performance for LEP200”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1564-1567.
[n] Q. Wang et al., “A Study on the Improved Cavity Bunch Length Monitor for FEL”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 39-42. doi:10.18429/JACoW-FLS2018-TUP1WD02
[n] J. Ungrin, S. O. Schriber, and R. A. Vokes, “Post Coupler Studies for Alvarez Tanks to be Used for High Power or Variable Energy”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper E12, pp. 183-186.
[n] A. A. Varfolomeev, “High Energy Gamma Sources with SMall Energy Spread. Possible Schemes.”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 837-840.
[n] H. Ma et al., “Digital RF Control for Spallation Neutron Source Accumulator Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS078, pp. 611-613.
[n] H. S. Xu, X. Y. Li, and N. Wang, “CSR Impedance in HEPS Storage Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 379-382. doi:10.18429/JACoW-IPAC2021-MOPAB102
[n] Y. Chao, L. Ketcham, and C. Moore, “Understanding and Improving the High Field Orbit in the Fermilab Booster”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 815-818.
[n] V. S. Skachkov, I. M. Kapchinskiy, N. V. Lazarev, and A. V. Selin, “Circular Permanent Magnet Quadrupoles for Higher Frequency and Higher Shunt Impedance Linacs”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1400-1403.
[n] E. Jones, “The CERN Collider after ACOL”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 453-456.
[n] A. Pauluhn, “Stochastic Dynamics for Accelerators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 270-273.
[n] N. Madsen and J. S. Nielsen, “Laser-Cooling for Light Ion Accumulation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B13, pp. 1253-1255.
[n] P. Zhang et al., “The 166.6 MHz Proof-of-principle SRF Cavity for HEPS-TF”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 454-458. doi:10.18429/JACoW-SRF2017-TUPB034
[n] M. Hostettler and G. Papotti, “Beam Size Estimation from Luminosity Scans at the LHC During 2015 Proton Physics Operation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 290-292. doi:10.18429/JACoW-IPAC2016-MOPMR025
[n] A. Kanareykin, A. Altmark, and I. Sheinman, “A Double-Layered, Planar Dielectric Loaded Accelerating Structure”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG044, pp. 1897-1899.
[n] P. M. Anisimov, “Quantum Nature of Electrons in Classical X-ray FELs”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 338-341. doi:10.18429/JACoW-FEL2015-TUP006
[n] A. Aleksandrov, S. Assadi, W. Blokland, C. Deibele, W. Grice, and J. Pogge, “Beam in Gap Measurements at the SNS Front-End”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG041, pp. 1524-1526.
[n] H. P. Chang et al., “Longitudinal Beam Instability Observation with a Streak Camera at SRRC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP126G, pp. 1120-1122.
[n] G. O. Hendry et al., “Design and Performance of a Compact H- Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABP-08, pp. 125-127.
[n] S. Pugh and B. Ng, “Vacuum Control System for the MLI Model 1.2-400 Synchrotron Light Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1514-1516.
[n] D. McGinnis, J. Budlong, G. Jackson, J. Marriner, and D. Poll, “Design of 4-8 GHz Bunched Beam Stochastic Cooling Arrays for the Fermilab Tevatron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1389-1392.
[n] R. J. Roussel et al., “Transformer Ratio Measurements from Ramped Beams in the Plasma Blowout Regime using Emittance Exchange”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3778-3781. doi:10.18429/JACoW-IPAC2019-THPGW088
[n] A. I. Drozhdin et al., “Collimation System Design for Beam Loss Localization with Slipstacking Injection in the Fermilab Main Injector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS016, pp. 1688-1690.
[n] R. J. Krisciokaitis and K. W. Robinson, “A Magnetic Bottle with Electrodes for Trapping Low Energy Electrons”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 110-113.
[n] S. D. Nelson, R. J. Briggs, G. J. Caporaso, A. Friedman, B. R. Poole, and W. Waldron, “Electromagnetic Simulations of Helical-Based Ion Acceleration Structures”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT037, pp. 2485-2487.
[n] A. Bernhard et al., “Spectral Characterisation of the ANKA-SCU Radiation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP084, pp. 2465-2467.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Peschke, U. Jandewerth, F. Nolden, P. Petri, and M. Steck, “Prototype Pick-up Module for CR Stochastic Cooling at FAIR”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper THPMCP003, pp. 130-133.
- P. N. Ostroumov et al., “Completion of Efficiency and Intensity Upgrade of the ATLAS Facility”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP005, pp. 449-451.
- M. Bahte, F. C. Herrmann, and P. Schm??ser, “Magnetization and Susceptibility Measurements on Niobium Samples for Cavity Production”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D10, pp. 881-889.
- M. Pojer et al., “LHC Operational Experience of the 6.5 TeV Proton Run with ATS Optics”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 216-219.
- D. Rifuggiato, L. Calabretta, P. Gmaj, and G. Bellomo, “Analysis of the Final Magnetic Measurements of the L.N.S. Superconducting Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-19, pp. 241-244.
- M. P. Sangroula, R. M. Lill, R. R. Lindberg, and R. B. Zabel, “Measuring the Coupling Impedance of Vacuum Components for the Advanced Photon Source Upgrade Using a Goubau Line”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3211-3214.
- G. Stange, “A New Type of Pulsed Air-Core Multipoles of Simple Construction”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2829-2832.
- S. A. Perezhogin, M. I. Ayzatsky, and K. Yu. Kramarenko, “Beam Loading the Standing Wave Injector on the Base of Evanescent Wave”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI068, pp. 1652-1654.
- S. A. Perezhogin et al., “Test Results of Injector Based on Resonance System with Evanescent Oscillations”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT133, pp. 1437-1439.
- V. I. Bobylev, “Operation of the Linac-Injector Modulator into a Mismatched Load”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P03, pp. 314-317.
- O. Marcouill?® et al., “W164: A Wiggler Dedicated to the PUMA Beamline and the FEMTOSLICING Project at SOLEIL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1998-2000.
- S. Asaoka, G. Isoyama, A. Mikuni, Y. Miyahara, and H. Nishimura, “Bunch Lengthening in SOR”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2663-2666.
- Y. L. Zhang, D. P. Jin, and P. Zhu, “The Fast Protection System for CSNS Accelerator”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 593-595.
- A. Roy et al., “High Power Microwave Generation From Coaxial Virtual Cathode Oscillator”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA144, pp. 523-525.
- C. A. Brau, H. L. Andrews, C. H. Boulware, and J. D. Jarvis, “Gain and Coherent Radiation from a Smith-Purcell Free-Electron Laser”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS60, pp. XX-XX.
- J. Riedel and J. Vincent, “The RF Systems of the MSU K500 and K800 Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper H05, pp. 315-316.
- M. Killenberg, M. Hierholzer, Ch. Schmidt, S. Marsching, and J. Wychowaniak, “Integrating Control Applications into Different Control Systems”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 581-584.
- P. Bastl et al., “Hardware Architecture of the ELI Beamlines Control and DAQ System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 2000-2006.
- V. V. Danilov et al., “The Concept of Round Colliding Beams”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP007L, pp. 1149-1151.
- H. W. Isch, “Realization of the LEP Power Converters”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1166-1169.
- D. Reschke, G. M??ller, H. Piel, J. Pouryamout, and R. W. R?Âth, “Accelerating Gradients Above 15MV/m in 3GHz Nine -Cell Structures”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I53, pp. XX-XX.
- S. Wurtele and M. Sessler, “Transverse Instability in a 50GeV x 50GeV Muon Collider Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP45, pp. 3056-3058.
- W. M. Fawley, K.-J. Kim, R. R. Lindberg, and Yu. Shvyd, “XFEL Oscillator Simulation Including Angle-Dependent Crystal Reflectivity”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper TUPA12, pp. 234-237.
- M. A. Jebramcik and J. M. Jowett, “Prospects for Future Asymmetric Collisions in the LHC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 484-487.
- B. Vosicki and K. Zankel, “The Sodium Curtain Beam Profile Monitor of the ISR”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1475-1479.
- E. A. Nanni et al., “Design of a Field-Emission X-Band Gun Driven by Solid-State RF Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4399-4402.
- P. Schoessow et al., “The Argonne Wakefield Accelerator High Current Photocathode Gun and Drive Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPB11, pp. 976-978.
- J. F. Amundson, P. Spentzouris, and E. G. Stern, “Space Charge Simulations for the Mu2e Experiment at Fermilab”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP017, pp. 3226-3226.
- S. A. Gavrilov, P. I. Reinhardt-Nickoulin, and A. I. Titov, “2D Non-Destructive Transverse Diagnostics by Beam Cross-section Monitor”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 393-395.
- M.-E. Couprie et al., “The ARC-EN-CIEL Fourth Generation Light Source Proposal”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH066, pp. 131-134.
- J. Y. Zhai et al., “IHEP 1.3 GHz Low Loss Large Grain 9-cell Cavity Fabrication, Processing and Test”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP073, pp. 305-307.
- A. I. Papash, A. V. Smirnov, and C. P. Welsch, “Ion Kinetics in the Ultra-low Energy Electrostatic Storage Ring (USR)”, in Proc. 8th Workshop on Beam Cooling and Related Topics (COOL'11), Alushta, Ukraine, Sep. 2011, paper WECOA01, pp. 89-91.
- M. Akemoto, S. Gold, A. Krasnykh, and R. Koontz, “Design of a PFN for the NLC Klystron Pulse Modulator”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D038, pp. 175-177.
- E. Acerbi, G. Bellomo, L. Rossi, S. Zhou, and P. Gmaj, “The Magnetic Field Measurements of the Milan Superconducting Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper G2-07, pp. 486-489.
- A. Slivin et al., “Commissioning of the SOCHI Applied Station Beam and Beam Transfer Line at the NICA Accelerator Complex”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 3099-3101.
- P. Boehler et al., “Experience With the Commissioning of the U15-Undulator for SwissFEL-Aramis Beamline and New Developments for the Athos Beamline”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 283-287.
- J. L. Gonzalez, T. B. Bogey, C. Deplano, and J.-J. Savioz, “Development of a High Dynamic Range Beam Position Measurement System Using Logarithmic Amplifiers for the SPS at CERN”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC18, pp. 89-92.
- M. Veronese et al., “A Nanofabricated Wirescanner: Design, Fabrication and Experimental Results”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 314-317.
- M. P. Sangroula, R. M. Lill, R. R. Lindberg, and X. Sun, “Impedance Measurement of Vacuum Chamber Components for the Advance Photon Source (APS) Upgrade”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3583-3586.
- A. Sato et al., “Six-sector FFAG Ring to Demonstrate Bunch Rotation for PRISM”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP007, pp. 3389-3391.
- E. A. Startsev, R. C. Davidson, W. W. Lee, and H. Qin, “Nonlinear δ F Simulation Studies of Intense Charged Particle Beams with Large Pressure Anisotropy”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH100, pp. 3081-3083.
- M. Kelly et al., “Installation and commissioning of the APS-U bunch lengthening system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS10, pp. 2713-2716.
- C. H. Rode, R. Ferry, T. Lincicome, J. Makara, J. Theilacker, and R. Walker, “Operation of the Tevatron Six-Kilometer-Long Transfer Line”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2769-2772.
- T.-Y. Lee, “Status of PLSII Operation”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1223-1225.
- J. P. Girardeau-Montaut et al., “New Electron Source Assisted by Two Lasers”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1041-1044.
- C. A. Kitegi et al., “Status of the HITRAP Decelerator Linac at GSI”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT027, pp. 1201-1203.
- W. Li et al., “New insertion device control system for the APS upgrade”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG61, pp. 1394-1397.
- S. Biri, J. P?ílink?ís, and A. Valek, “Heavy Ion Facility in ATOMKI”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper I-20, pp. 99-101.
- S. P. Antipov et al., “X-Ray and Charged Particle Detection by Detuning of a Microwave Resonator”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 503-505.
- S. Appel, O. Boine-Frankenheim, and T. Weiland, “Simulation and Observation of the Space Charge Induced Multi-Stream Instability of LinacBunches in the SIS18 Synchrotron”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD002, pp. 1916-1918.
- H. Stechemesser et al., “Cosy Vacuum System and Remote Operation Elements”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1329-1332.
- G. Hemmie, “Status of the DESY II Project”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 851-854.
- S.-H. Lee, D. E. Kim, S. Sasaki, I. Vasserman, and D. R. Walters, “Magnetic Properties of Undulator Vacuum Chamber Materials for the Linac Coherent Light Source”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUOC003, pp. XX-XX.
- M. Kim, S. M. Ammons, B. Hackel, and L. Poyneer, “Processing System Design for Implementing a Linear Quadratic Gaussian (LQG) Controller to Optimize the Real-Time Correction of High Wind-Blown Turbulence”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 762.
- G. G. Gulbekyan et al., “The Project of the HV Axial Injection for the DC-280 Cyclotron at the FLNR JINR”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC08, pp. 333-335.
- M. E. Toms and T. F. Godlove, “Positron Production with the USNRL Linac”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 462-465.
- A. I. Muminov, I. N. Konovalov, B. G. Kurganov, and A. U. Usmonov, “A Semi-Automatic System for Radioisotope Production”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper K-11, pp. 568-570.
- M. Yudelev, J. Burmeister, E. Blosser, R. L. Maughan, and C. Kota, “Hospital Based Superconducting Cyclotron for Neutron Therapy: Medical Physics Perspective”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P3-14, pp. XX-XX.
- L. Ives, J. Neilson, and W. Vogler, “CASCADE - An Advanced Computational Tool for Waveguide Component and Window Design”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPB003, pp. 269-271.
- A. P. Sumbaev, A. M. Barnyakov, and A. E. Levichev, “About the Limits for the Accelerated Beam Current in the LUE-200 Linac of the IREN Facility”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 320-322.
- J. Huguenin, R. Dubois, R. El-Bez, and G. Visconti, “The New 500 keV Single-Gap Pre-injector Tube for the CERN Proton Synchrotron Linac”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper VII-02, pp. 355-364.
- A. Sledneva, V. Aleksandrov, and V. V. Kobets, “Calculation of Electron Beam Dynamics in Four Accelerating Stations for JINR Linear Electron Accelerator LINAC-200”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 566-568.
- N. Majernik et al., “Arbitrary Longitudinal Pulse Shaping with a Multi-Leaf Collimator and Emittance Exchange”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1600-1603.
- M. Odera and M. Hemmi, “Accelerating Structure with Chain-Like Electrode Configuration”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0009, pp. 346-348.
- J. Fang, P. Li, P. Lu, Q. Luo, B. Sun, and X. H. Wang, “Calibration of Quadrupole Component of Beam Position Monitor at HLS LINAC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP054, pp. 4075-4077.
- M. Romagnoni, “Future Prospective for Bent Crystals in Accelerators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3545-3547.
- T. Hara et al., “Multi-beamline Operation Test at SACLA”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 293-296.
- G. H. Luo et al., “The Status of Top-up Injection at NSRRC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUM104, pp. XX-XX.
- S. Y. Lee and X. F. Zhao, “Microwave Instabilities in Booster and AGS”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1188-1190.
- A. S. Dhavale and K. C. Mittal, “Evaluation of External Q Using Kroll-Yu Method With Microwaves Studio”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA133, pp. 503-505.
- P. C. Chiu, J. Chen, Y. K. Chen, K. T. Hsu, K. H. Hu, and C. H. Kuo, “Injection Efficiency Diagnostic at TLS Storage Ring”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD67, pp. 461-463.
- A. Chapman-Hatchett, A. Jansson, and D. J. Williams, “A Magnetic Quadrupole Pick-Up for the CERN PS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA154, pp. 2223-2225.
- M. J. Bland, J. Clare, and P. W. Wheeler, “Multiphase Resonant Power Converter for High Energy Physics Applications”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS122, pp. 2658-2660.
- M. F. Fernandes, J. Tan, and C. P. Welsch, “Cryogenic Current Comparator as Low Intensity Beam Current Monitor in the CERN Antiproton Decelerators”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF25, pp. 267-270.
- V. Talanov, D. C. Kiselev, and M. Wohlmuther, “Numerical Estimation of the Equivalent Dose Rate after the Irradiation of a Tungsten Collimator by a Low Energy Proton Beam”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 890-892.
- B. S. K. Srivastava and P. Fatnani, “Comprehensive Machine Status Monitoring and Information Services Using Web Technology”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_081.
- H. Henke, “Transverse Damping in a 30 GHZ Very High Energy Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1346-1349.
- S. Ghatak, A. S. Dhavale, N. Gupta, and K. C. Mittal, “A Kinetic Model of Multipaction for SRF Cavities for Accelerator Driven Sub-Critical System (ADSS)”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP090, pp. 1741-1743.
- T. Yokoi, K. J. Peach, and H. Witte, “Beam Extraction of PAMELA NS-FFAG”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC048, pp. 567-569.
- M. L. Neubauer, A. Dudas, and F. Marhauser, “Using Conductive Nanoparticles to Reduce the Surface Charging of Ceramics”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4392-4394.
- P. H, W. F. O. M, H. Klein, U. van Rienen, and T. Weiland, “The 36-Cell Structure - Calculations and Experiments”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3W003, pp. 524-526.
- J. M. Bassaler and H. Baudrand, “Calculation of the Resonance Frequencies of the Rhodotron Cavity using Green Function”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 898-901.
- J.-P. Bojon, O. Groebner, J.-M. Laurent, and P. M. Stubin, “Experience with the Operation of the LEP Vacuum System and its Performance for LEP200”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1564-1567.
- Q. Wang et al., “A Study on the Improved Cavity Bunch Length Monitor for FEL”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 39-42.
- J. Ungrin, S. O. Schriber, and R. A. Vokes, “Post Coupler Studies for Alvarez Tanks to be Used for High Power or Variable Energy”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper E12, pp. 183-186.
- A. A. Varfolomeev, “High Energy Gamma Sources with SMall Energy Spread. Possible Schemes.”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 837-840.
- H. Ma et al., “Digital RF Control for Spallation Neutron Source Accumulator Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS078, pp. 611-613.
- H. S. Xu, X. Y. Li, and N. Wang, “CSR Impedance in HEPS Storage Ring”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 379-382.
- Y. Chao, L. Ketcham, and C. Moore, “Understanding and Improving the High Field Orbit in the Fermilab Booster”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 815-818.
- V. S. Skachkov, I. M. Kapchinskiy, N. V. Lazarev, and A. V. Selin, “Circular Permanent Magnet Quadrupoles for Higher Frequency and Higher Shunt Impedance Linacs”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1400-1403.
- E. Jones, “The CERN Collider after ACOL”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 453-456.
- A. Pauluhn, “Stochastic Dynamics for Accelerators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 270-273.
- N. Madsen and J. S. Nielsen, “Laser-Cooling for Light Ion Accumulation”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6B13, pp. 1253-1255.
- P. Zhang et al., “The 166.6 MHz Proof-of-principle SRF Cavity for HEPS-TF”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 454-458.
- M. Hostettler and G. Papotti, “Beam Size Estimation from Luminosity Scans at the LHC During 2015 Proton Physics Operation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 290-292.
- A. Kanareykin, A. Altmark, and I. Sheinman, “A Double-Layered, Planar Dielectric Loaded Accelerating Structure”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG044, pp. 1897-1899.
- P. M. Anisimov, “Quantum Nature of Electrons in Classical X-ray FELs”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 338-341.
- A. Aleksandrov, S. Assadi, W. Blokland, C. Deibele, W. Grice, and J. Pogge, “Beam in Gap Measurements at the SNS Front-End”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG041, pp. 1524-1526.
- H. P. Chang et al., “Longitudinal Beam Instability Observation with a Streak Camera at SRRC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP126G, pp. 1120-1122.
- G. O. Hendry et al., “Design and Performance of a Compact H- Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABP-08, pp. 125-127.
- S. Pugh and B. Ng, “Vacuum Control System for the MLI Model 1.2-400 Synchrotron Light Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1514-1516.
- D. McGinnis, J. Budlong, G. Jackson, J. Marriner, and D. Poll, “Design of 4-8 GHz Bunched Beam Stochastic Cooling Arrays for the Fermilab Tevatron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1389-1392.
- R. J. Roussel et al., “Transformer Ratio Measurements from Ramped Beams in the Plasma Blowout Regime using Emittance Exchange”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3778-3781.
- A. I. Drozhdin et al., “Collimation System Design for Beam Loss Localization with Slipstacking Injection in the Fermilab Main Injector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS016, pp. 1688-1690.
- R. J. Krisciokaitis and K. W. Robinson, “A Magnetic Bottle with Electrodes for Trapping Low Energy Electrons”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 110-113.
- S. D. Nelson, R. J. Briggs, G. J. Caporaso, A. Friedman, B. R. Poole, and W. Waldron, “Electromagnetic Simulations of Helical-Based Ion Acceleration Structures”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT037, pp. 2485-2487.
- A. Bernhard et al., “Spectral Characterisation of the ANKA-SCU Radiation”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP084, pp. 2465-2467.
Back to search