Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Ammigan et al., “Post Irradiation Examination Results of the NT-02 Graphite Fins Numi Target”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 99-101. doi:10.18429/JACoW-NAPAC2016-MOPOB13
[n] A. Castilla et al., “First RF Performance Results for the DQW Crab Cavities to be Tested in the CERN SPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1077-1080. doi:10.18429/JACoW-IPAC2017-MOPVA095
[n] A. V. Pavlenko, A. M. Batrakov, and I. V. Ilyin, “Electronics for Precise Measurements of Accelerator Pulsed Magnets”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA033, pp. 3216-3218.
[n] V. Gubin et al., “Experimental Facility for E-Beam Irradiation Test of Prototype IF Target in RISP”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 254-256. doi:10.18429/JACoW-RUPAC2016-TUPSA018
[n] P. McIntosh et al., “An Over-Damped Cavity Longitudinal Kicker for the PEP-II LER”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB060, pp. 3141-3143.
[n] V. K. Grishin et al., “X-Ray Radiation by Relativistic Electrons in Condensed Media on Base of MSU Race-Track Microtron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAG12, pp. 105-106.
[n] L. Li et al., “Field Measurement of the Quadrupole Magnet for CSNS/RCS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1265-1267. doi:10.18429/JACoW-IPAC2014-TUPRO096
[n] Y. Xu et al., “Measurement of Key Parameters for EAST Neutral Beam Injector”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper WEPH32, pp. 87-89.
[n] R. Ganter et al., “Status of SwissFEL Undulator Lines”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO22, pp. 263-266.
[n] L. Acosta, C. Bontoiu, I. Martel, A. R. Pinto G??mez, A. C. C. Villari, and J. Lucas, “Beam Transfer Studies for LINCE Experimental Areas”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3292-3294. doi:10.18429/JACoW-IPAC2014-THPME032
[n] J. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and R. X. Yuan, “Beam Experiment of Low Q CBPM Prototype for SXFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 202-204. doi:10.18429/JACoW-IPAC2016-MOPMB049
[n] H. Joehri et al., “Development of the new UE38 Undulator for the Athos Beamline in SwissFEL”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. XX-XX. doi:10.18429/JACoW-MEDSI2018-TUOPMA03
[n] Y. Li, J. Pflueger, E. Gluskin, and N. Vinokurov, “Fine Tuning of the K-parameter of Two Segments of the European XFEL Undulator Systems”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPC28, pp. 144-147.
[n] W. L. Zhan et al., “HIRFL-CSR Project”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper C-3, pp. XX-XX.
[n] Y. Adachi et al., “In-House Cyclotron and Radioisotopes Production System”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-07, pp. 622-625.
[n] U. Schryber et al., “Upgrading the PSI Accelerator Facility for High Intensity Operation”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 173-176.
[n] M. Korostelev, A. F. Grant, J. Lucas, O. B. Malyshev, and A. Wolski, “Beam Coupling Impedance in the ILC Damping Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP056, pp. 670-672.
[n] A. L. Gabard, J. P. Duppich, and D. George, “Radiation Hard Magnets at the Paul Scherrer Institute”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD011, pp. 3518-3520.
[n] R. B. Fiorito, B. E. Carlsten, D. W. Feldman, R. B. Feldman, A. H. Lumpkin, and D. W. Rule, “Optical Transition Radiation Measurements of the Los Alamos Free Electron Laser Driver”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 65-68.
[n] R. Appleby et al., “Machine Induced Backgrounds for FP420”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP006, pp. 559-561.
[n] I. Martel, C. Bontoiu, J. A. Duenas, D. Gordo, A. K. Orduz, and J. Sanchez-Segovia, “A New RF Laboratory for Developing Accelerator Cavities at the University of Huelva”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3046-3047. doi:10.18429/JACoW-IPAC2015-WEPMN052
[n] E. Hartwig, “The AEG Compact Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69F04, pp. XX-XX.
[n] M. Boscolo et al., “Studies of a Scheme for Low Emittance Muon Beam Production From Positrons on Target”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2486-2489. doi:10.18429/JACoW-IPAC2017-WEOBA3
[n] D. J. Martin, S. Allison, B. Scott, J. J. Sebek, and T. A. Trautwein, “Evaluation of Bergoz Instrumentation NPCT”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP034, pp. 4021-4023.
[n] V. I. Moiseev and V. Korchuganov, “Em Fields in a Metal in an External Magnetic Field at Low Temperatures”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 340-342. doi:10.18429/JACoW-RUPAC2018-WEPSB28
[n] F. Dupont and B. Gremont, “The 20 MeV Compact Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69F02, pp. XX-XX.
[n] V. Blinov et al., “Linux-Based Toolkit on the VEPP-4 Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP028, pp. XX-XX.
[n] I. Hofmann et al., “High Phase Space Density Beams for Heavy Ion Fusion Research”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 783-786.
[n] A. Regan, Y. M. Wang, and S. I. Kwon, “Analysis and Synthesis of the SNS Superconducting RF Control System”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUC16, pp. 531-533.
[n] R. Kramert et al., “Dynamic Alignment at SLS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A17, pp. 693-695.
[n] S. Q. Tian, H. H. Li, X. Y. Sun, M. Z. Zhang, and W. Z. Zhang, “A Design Approach of the Beam Optics in the Complex Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA048, pp. 2597-2599.
[n] W. Decking and F. Obier, “Layout of the Beam Switchyard at the European XFEL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC073, pp. 2163-2165.
[n] J. K. Johnson and R. Nemetz, “Power Combiners/Dividers for Loop Pickup and Kicker Arrays for FNAL Stochastic Cooling Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2171-2174.
[n] L. Gong, W. Chen, W. Kang, L. Z. Li, H. H. Lu, and Y. F. Yang, “Hall Element Relative Position and Angle Calibrations for the Cryogenic Permanent Magnet Undulator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2386-2388. doi:10.18429/JACoW-IPAC2016-WEPMR048
[n] M. Mehler, H. Klingbeil, M. Kumm, U. Laier, and K.-P. Ningel, “The Damping of Longitudinal Quadrupole Oscillations at GSI”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP079, pp. 2195-2197.
[n] U. Beck et al., “SPEAR 3 - A Low Emittance Source for SSRL”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUCL6, pp. 206-208.
[n] W. Chen, C. Cao, C. Shi, and Z. Yin, “End Chamfer Study and Field Measurements of the BEPCII Dipoles”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT004, pp. 919-921.
[n] R. Enparantza, F. J. Bermejo, J. Lucas, and L. Uriarte, “Baseline Design of the ESS Bilbao Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP080, pp. 2704-2706.
[n] M. I. Besana, E. Hohmann, M. Sapinski, J. Snuverink, and D. Werthmüller, “Investigation of Long Radial Probe Activation in the PSI Main Ring Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEAO05, pp. 163-166. doi:10.18429/JACoW-CYCLOTRONS2022-WEAO05
[n] K. Honkavaara et al., “Design of OTR Beam Profile Monitors for the TESLA Test Facility, Phase 2 (TTF2)”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB028, pp. 2476-2478.
[n] B. Kim et al., “EUDG Implementation in Korea for High-Energy Physics Study”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP503, pp. XX-XX.
[n] A. Ting et al., “Channeling and Time Evolution of Laser Wakes and Electron Acceleration in a Self-Modulated Laser Wakefield Accelerator Experiment”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3PC001, pp. XX-XX.
[n] Z. Yin, Y. Wu, and J. F. Zhang, “Design and Experiment of the BEPCII IR Conventional Dual Aperture Quadrupole”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper MPPT002, unpublished.
[n] C. B. Fulmer, M. Barbier, and K. S. Toth, “Residual Radiation Studies”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 673-678.
[n] R. Cooper, K. Chan, L. Thode, and T. Wang, “Transverse Effects of a Waveguide Coupling Slot”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-05, pp. 315-317.
[n] Y. S. Zhu, F. S. Chen, W. Kang, and X. J. Sun, “Magnetic Field Design of the BAPS High Precision Quadrupole Magnet”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME011, pp. 3531-3533.
[n] J. M. Potter, M. L. Barnes, and E. A. Bjorklund, “Programmable Master-Timer System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 628-631.
[n] K. Anderson, C. M. Bhat, J. Marriner, and Z. Tang, “An Antiproton Target Design for Increased Beam Intensity”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1946-1949.
[n] F. Hornstra and H. J. Varga, “A Fast Sequencing Bipolar Energy Discharge System for the Beam Bumper Magnet in the Zero Gradient Synchrotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 464-468.
[n] Y. Jongen, M. Lacroix, M. Loiselet, A. Ninane, G. Ryckewaert, and S. Zaremba, “A Two-Cyclotron Concept for the Production of Radioactive Ion Beams”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1620-1623.
[n] T. Vsevolozhskaya et al., “Liquid Metal Target for NLC Positron Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH126, pp. 1505-1507.
[n] E. L?®corch?® and P. Lermine, “Use of the Ingres RDBMS inside the new Ganil Linux based control system”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_087.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Ammigan et al., “Post Irradiation Examination Results of the NT-02 Graphite Fins Numi Target”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 99-101.
- A. Castilla et al., “First RF Performance Results for the DQW Crab Cavities to be Tested in the CERN SPS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1077-1080.
- A. V. Pavlenko, A. M. Batrakov, and I. V. Ilyin, “Electronics for Precise Measurements of Accelerator Pulsed Magnets”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA033, pp. 3216-3218.
- V. Gubin et al., “Experimental Facility for E-Beam Irradiation Test of Prototype IF Target in RISP”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 254-256.
- P. McIntosh et al., “An Over-Damped Cavity Longitudinal Kicker for the PEP-II LER”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB060, pp. 3141-3143.
- V. K. Grishin et al., “X-Ray Radiation by Relativistic Electrons in Condensed Media on Base of MSU Race-Track Microtron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAG12, pp. 105-106.
- L. Li et al., “Field Measurement of the Quadrupole Magnet for CSNS/RCS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1265-1267.
- Y. Xu et al., “Measurement of Key Parameters for EAST Neutral Beam Injector”, in Proc. 12th Symposium on Accelerator Physics (SAP'14), Lanzhou, China, Aug. 2014, paper WEPH32, pp. 87-89.
- R. Ganter et al., “Status of SwissFEL Undulator Lines”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO22, pp. 263-266.
- L. Acosta, C. Bontoiu, I. Martel, A. R. Pinto G??mez, A. C. C. Villari, and J. Lucas, “Beam Transfer Studies for LINCE Experimental Areas”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3292-3294.
- J. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and R. X. Yuan, “Beam Experiment of Low Q CBPM Prototype for SXFEL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 202-204.
- H. Joehri et al., “Development of the new UE38 Undulator for the Athos Beamline in SwissFEL”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. XX-XX.
- Y. Li, J. Pflueger, E. Gluskin, and N. Vinokurov, “Fine Tuning of the K-parameter of Two Segments of the European XFEL Undulator Systems”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOPC28, pp. 144-147.
- W. L. Zhan et al., “HIRFL-CSR Project”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper C-3, pp. XX-XX.
- Y. Adachi et al., “In-House Cyclotron and Radioisotopes Production System”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-07, pp. 622-625.
- U. Schryber et al., “Upgrading the PSI Accelerator Facility for High Intensity Operation”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 173-176.
- M. Korostelev, A. F. Grant, J. Lucas, O. B. Malyshev, and A. Wolski, “Beam Coupling Impedance in the ILC Damping Rings”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP056, pp. 670-672.
- A. L. Gabard, J. P. Duppich, and D. George, “Radiation Hard Magnets at the Paul Scherrer Institute”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD011, pp. 3518-3520.
- R. B. Fiorito, B. E. Carlsten, D. W. Feldman, R. B. Feldman, A. H. Lumpkin, and D. W. Rule, “Optical Transition Radiation Measurements of the Los Alamos Free Electron Laser Driver”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 65-68.
- R. Appleby et al., “Machine Induced Backgrounds for FP420”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP006, pp. 559-561.
- I. Martel, C. Bontoiu, J. A. Duenas, D. Gordo, A. K. Orduz, and J. Sanchez-Segovia, “A New RF Laboratory for Developing Accelerator Cavities at the University of Huelva”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3046-3047.
- E. Hartwig, “The AEG Compact Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69F04, pp. XX-XX.
- M. Boscolo et al., “Studies of a Scheme for Low Emittance Muon Beam Production From Positrons on Target”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2486-2489.
- D. J. Martin, S. Allison, B. Scott, J. J. Sebek, and T. A. Trautwein, “Evaluation of Bergoz Instrumentation NPCT”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP034, pp. 4021-4023.
- V. I. Moiseev and V. Korchuganov, “Em Fields in a Metal in an External Magnetic Field at Low Temperatures”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 340-342.
- F. Dupont and B. Gremont, “The 20 MeV Compact Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69F02, pp. XX-XX.
- V. Blinov et al., “Linux-Based Toolkit on the VEPP-4 Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP028, pp. XX-XX.
- I. Hofmann et al., “High Phase Space Density Beams for Heavy Ion Fusion Research”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 783-786.
- A. Regan, Y. M. Wang, and S. I. Kwon, “Analysis and Synthesis of the SNS Superconducting RF Control System”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUC16, pp. 531-533.
- R. Kramert et al., “Dynamic Alignment at SLS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A17, pp. 693-695.
- S. Q. Tian, H. H. Li, X. Y. Sun, M. Z. Zhang, and W. Z. Zhang, “A Design Approach of the Beam Optics in the Complex Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA048, pp. 2597-2599.
- W. Decking and F. Obier, “Layout of the Beam Switchyard at the European XFEL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC073, pp. 2163-2165.
- J. K. Johnson and R. Nemetz, “Power Combiners/Dividers for Loop Pickup and Kicker Arrays for FNAL Stochastic Cooling Rings”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2171-2174.
- L. Gong, W. Chen, W. Kang, L. Z. Li, H. H. Lu, and Y. F. Yang, “Hall Element Relative Position and Angle Calibrations for the Cryogenic Permanent Magnet Undulator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2386-2388.
- M. Mehler, H. Klingbeil, M. Kumm, U. Laier, and K.-P. Ningel, “The Damping of Longitudinal Quadrupole Oscillations at GSI”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP079, pp. 2195-2197.
- U. Beck et al., “SPEAR 3 - A Low Emittance Source for SSRL”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUCL6, pp. 206-208.
- W. Chen, C. Cao, C. Shi, and Z. Yin, “End Chamfer Study and Field Measurements of the BEPCII Dipoles”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT004, pp. 919-921.
- R. Enparantza, F. J. Bermejo, J. Lucas, and L. Uriarte, “Baseline Design of the ESS Bilbao Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP080, pp. 2704-2706.
- M. I. Besana, E. Hohmann, M. Sapinski, J. Snuverink, and D. Werthmüller, “Investigation of Long Radial Probe Activation in the PSI Main Ring Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEAO05, pp. 163-166.
- K. Honkavaara et al., “Design of OTR Beam Profile Monitors for the TESLA Test Facility, Phase 2 (TTF2)”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB028, pp. 2476-2478.
- B. Kim et al., “EUDG Implementation in Korea for High-Energy Physics Study”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP503, pp. XX-XX.
- A. Ting et al., “Channeling and Time Evolution of Laser Wakes and Electron Acceleration in a Self-Modulated Laser Wakefield Accelerator Experiment”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3PC001, pp. XX-XX.
- Z. Yin, Y. Wu, and J. F. Zhang, “Design and Experiment of the BEPCII IR Conventional Dual Aperture Quadrupole”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT002, unpublished.
- C. B. Fulmer, M. Barbier, and K. S. Toth, “Residual Radiation Studies”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 673-678.
- R. Cooper, K. Chan, L. Thode, and T. Wang, “Transverse Effects of a Waveguide Coupling Slot”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-05, pp. 315-317.
- Y. S. Zhu, F. S. Chen, W. Kang, and X. J. Sun, “Magnetic Field Design of the BAPS High Precision Quadrupole Magnet”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME011, pp. 3531-3533.
- J. M. Potter, M. L. Barnes, and E. A. Bjorklund, “Programmable Master-Timer System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 628-631.
- K. Anderson, C. M. Bhat, J. Marriner, and Z. Tang, “An Antiproton Target Design for Increased Beam Intensity”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1946-1949.
- F. Hornstra and H. J. Varga, “A Fast Sequencing Bipolar Energy Discharge System for the Beam Bumper Magnet in the Zero Gradient Synchrotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 464-468.
- Y. Jongen, M. Lacroix, M. Loiselet, A. Ninane, G. Ryckewaert, and S. Zaremba, “A Two-Cyclotron Concept for the Production of Radioactive Ion Beams”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1620-1623.
- T. Vsevolozhskaya et al., “Liquid Metal Target for NLC Positron Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH126, pp. 1505-1507.
- E. L?®corch?® and P. Lermine, “Use of the Ingres RDBMS inside the new Ganil Linux based control system”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_087.
Back to search