Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. N. Stolyarov et al., “Development of Test Facility for HED@FAIR Quadrupoles”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 366-368. doi:10.18429/JACoW-RUPAC2018-WEPSB44
[n] A. Ageyev et al., “STATUS OF SUPERCONDUCTING RADIOFREQUENCY SEPARATOR CRYOGENIC SYSTEM”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFO04, pp. XX-XX.
[n] H. Thiesen and D. Nisbet, “Review of the Initial Phases of the LHC Power Converter Commissioning”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP132, pp. 3670-3672.
[n] A. Ageyev et al., “STATUS OF SUPERCONDUCTING RADIOFREQUENCY SEPARATOR CRYOGENIC SYSTEM”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP10, pp. XX-XX.
[n] E. Ezura, M. Kondoh, K. Kudo, and S. Takeda, “Longitudinal Behavior of the Beam in KEK Booster”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3538-3541.
[n] S. Kozub et al., “SC and HTS-related Activity at IHEP”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 129-133. doi:10.18429/JACoW-RUPAC2016-THZMH01
[n] D. Widegren, T. Ladzinski, R. Lyzwa, S. Mallon Amerigo, S. Petit, and B. Rousseau, “Micado - The Data Import Engine of the CERN Engineering and Equipment Data Management System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC131, pp. 1377-1379.
[n] P. Martel et al., “Manufacturing and Test Folder: MTF”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO026, pp. 2688-2690.
[n] G. Baribaud et al., “Conversion of the CERN PS Booster Controls: Local Hardware Test and Accelerator Study Facilities”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2249-2252.
[n] O. Capatina, K. Artoos, N. Bourcey, O. Calvet, and C. Hauviller, “Mechanical Dynamic Analysis of the LHC Arc Cryo-Magnets”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG007, pp. 1434-1436.
[n] J. Brossard, M. Desmons, B. M. Mercier, C. P. Prevost, and R. Roux, “Construction of the Probe Beam Photo-injector of CTF3”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS114, pp. 828-830.
[n] A. Tovar et al., “Validation of the Data Consolidation in Layout Database for the LHC Tunnel Cryogenics Controls Package”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC057, pp. 1197-1200.
[n] Y. Cho, T. K. Khoe, J. Moenich, and L. G. Ratner, “A Cold-Bore Vacuum System Design for POPAE”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1293-1296.
[n] K. M. Terwilliger, “Orbit Dynamics for a Four-Spiral-Sector Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A16, pp. 73-75.
[n] M. Pojer, R. Schmidt, M. Solfaroli Camillocci, and S. Wagner, “Machine Availability at the Large Hadron Collider”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD029, pp. 3566-3568.
[n] J.-L. Revol et al., “Highlights of Accelerator Activities in France on behalf of the Accelerator Division of the French Physics Society”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA048, pp. 181-183.
[n] G. Baribaud et al., “The LEP Beam Orbit Measurement System: Status and Running-in Results”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 137-140.
[n] G. Olry et al., “Development of a Beta 0.12, 88 MHz, Quarter Wave Resonator and its Cryomodule for the SPIRAL2 Project”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP37, pp. 323-327.
[n] S. Russenschuck et al., “Challenges for the Magnet System of LHeC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR075, pp. 1996-1998.
[n] M. Solfaroli Camillocci et al., “Commissioning of the LHC Magnet Powering System in 2009”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB045, pp. 376-378.
[n] P. Gomes et al., “Consolidations on the Vacuum Controls of the CERN Accelerators, During the First Long Shutdown of the LHC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 322-325. doi:10.18429/JACoW-ICALEPCS2015-MOPGF104
[n] G. Benincasa et al., “Rejuvenation of the CPS Control System: The First Slice”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1353-1356.
[n] F. Bordry, “Status of the Large Hadron Collider (LHC)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOXAGM01, pp. 1-5.
[n] Y. Arakita et al., “KEK Fast Cycling Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1554-1557.
[n] S. Kozub et al., “Development and Production of Superconducting and Cryogenic Equipment and Systems for Accelerators by IHEP”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THCHC01, pp. 295-299.
[n] S. Kozub et al., “Production of Superconducting Magnets and Cryogenic Systems at IHEP”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper THAOR02, pp. 146-148.
[n] S. Yammine and H. Thiesen, “HL-LHC Inner Triplet Powering and Control Strategy”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3544-3546. doi:10.18429/JACoW-IPAC2017-WEPVA116
[n] A. Suraci et al., “Instrumentation, Field Network and Process Automation for the Cryogenic System of the LHC Test String”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP065, pp. XX-XX.
[n] E. Blanco, F. B. Bernard, P. Gayet, and H. Milcent, “UNICOS: An Open Framework”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THD003, pp. 910-912.
[n] G. P. Benincasa et al., “Modulation of the Lepton Production for the CERN LEP Pre-Injector”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1084-1087.
[n] L. Tkachenko et al., “Development of HED@FAIR Quadrupole”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 78-80. doi:10.18429/JACoW-RUPAC2018-WECBMH03
[n] L. G. Ratner, F. Hornstra, S. Marcowitz, N. Reay, T. Romanowski, and R. Sherr, “Simultaneous Multiple Targeting Techniques”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 170-172.
[n] Ya. S. Derbenev, E. L. Saldin, and V. Shiltsev, “Microbunch Emittance Growth Due to Radiative Interaction”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP028G, pp. 1347-1349.
[n] A. Ageev et al., “Commissioning of the Beam Transfer Line to UNK”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2426-2429.
[n] K. M. Terwilliger, “Polarized Proton Beams at the AGS”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 809-814.
[n] P. Gayet, J. Casas-Cubillos, P. Gomes, M. Pezzetti, C.-H. Sicard, and F. J. Varas, “Application of Object-based Industrial Controls for Cryogenics”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO030, pp. 2013-2015.
[n] T. deParry and L. G. Ratner, “Evaluation of High Stability Secondary Emission Monitors”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 923-927.
[n] H. Sun, S. Gao, G. Qian, and D. Liang, “The Physical Mechanism of Ultra-Fast Automatic Cooling for Beams in the Six-Dimentional Emittance Space”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3696-3699.
[n] H. Suk, C. Kim, G. H. Kim, J. U. Kim, and H. J. Lee, “Electron Acceleration by Laser Wakefields in Tapered Plasma Densities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG049, pp. 1912-1914.
For LaTeX
Use Complete Form
For BibTeX
References
- M. N. Stolyarov et al., “Development of Test Facility for HED@FAIR Quadrupoles”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 366-368.
- A. Ageyev et al., “STATUS OF SUPERCONDUCTING RADIOFREQUENCY SEPARATOR CRYOGENIC SYSTEM”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFO04, pp. XX-XX.
- H. Thiesen and D. Nisbet, “Review of the Initial Phases of the LHC Power Converter Commissioning”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP132, pp. 3670-3672.
- A. Ageyev et al., “STATUS OF SUPERCONDUCTING RADIOFREQUENCY SEPARATOR CRYOGENIC SYSTEM”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP10, pp. XX-XX.
- E. Ezura, M. Kondoh, K. Kudo, and S. Takeda, “Longitudinal Behavior of the Beam in KEK Booster”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3538-3541.
- S. Kozub et al., “SC and HTS-related Activity at IHEP”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 129-133.
- D. Widegren, T. Ladzinski, R. Lyzwa, S. Mallon Amerigo, S. Petit, and B. Rousseau, “Micado - The Data Import Engine of the CERN Engineering and Equipment Data Management System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC131, pp. 1377-1379.
- P. Martel et al., “Manufacturing and Test Folder: MTF”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO026, pp. 2688-2690.
- G. Baribaud et al., “Conversion of the CERN PS Booster Controls: Local Hardware Test and Accelerator Study Facilities”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2249-2252.
- O. Capatina, K. Artoos, N. Bourcey, O. Calvet, and C. Hauviller, “Mechanical Dynamic Analysis of the LHC Arc Cryo-Magnets”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG007, pp. 1434-1436.
- J. Brossard, M. Desmons, B. M. Mercier, C. P. Prevost, and R. Roux, “Construction of the Probe Beam Photo-injector of CTF3”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS114, pp. 828-830.
- A. Tovar et al., “Validation of the Data Consolidation in Layout Database for the LHC Tunnel Cryogenics Controls Package”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC057, pp. 1197-1200.
- Y. Cho, T. K. Khoe, J. Moenich, and L. G. Ratner, “A Cold-Bore Vacuum System Design for POPAE”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1293-1296.
- K. M. Terwilliger, “Orbit Dynamics for a Four-Spiral-Sector Cyclotron”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A16, pp. 73-75.
- M. Pojer, R. Schmidt, M. Solfaroli Camillocci, and S. Wagner, “Machine Availability at the Large Hadron Collider”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD029, pp. 3566-3568.
- J.-L. Revol et al., “Highlights of Accelerator Activities in France on behalf of the Accelerator Division of the French Physics Society”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA048, pp. 181-183.
- G. Baribaud et al., “The LEP Beam Orbit Measurement System: Status and Running-in Results”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 137-140.
- G. Olry et al., “Development of a Beta 0.12, 88 MHz, Quarter Wave Resonator and its Cryomodule for the SPIRAL2 Project”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP37, pp. 323-327.
- S. Russenschuck et al., “Challenges for the Magnet System of LHeC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR075, pp. 1996-1998.
- M. Solfaroli Camillocci et al., “Commissioning of the LHC Magnet Powering System in 2009”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB045, pp. 376-378.
- P. Gomes et al., “Consolidations on the Vacuum Controls of the CERN Accelerators, During the First Long Shutdown of the LHC”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 322-325.
- G. Benincasa et al., “Rejuvenation of the CPS Control System: The First Slice”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1353-1356.
- F. Bordry, “Status of the Large Hadron Collider (LHC)”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOXAGM01, pp. 1-5.
- Y. Arakita et al., “KEK Fast Cycling Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1554-1557.
- S. Kozub et al., “Development and Production of Superconducting and Cryogenic Equipment and Systems for Accelerators by IHEP”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THCHC01, pp. 295-299.
- S. Kozub et al., “Production of Superconducting Magnets and Cryogenic Systems at IHEP”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper THAOR02, pp. 146-148.
- S. Yammine and H. Thiesen, “HL-LHC Inner Triplet Powering and Control Strategy”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3544-3546.
- A. Suraci et al., “Instrumentation, Field Network and Process Automation for the Cryogenic System of the LHC Test String”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP065, pp. XX-XX.
- E. Blanco, F. B. Bernard, P. Gayet, and H. Milcent, “UNICOS: An Open Framework”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THD003, pp. 910-912.
- G. P. Benincasa et al., “Modulation of the Lepton Production for the CERN LEP Pre-Injector”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1084-1087.
- L. Tkachenko et al., “Development of HED@FAIR Quadrupole”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 78-80.
- L. G. Ratner, F. Hornstra, S. Marcowitz, N. Reay, T. Romanowski, and R. Sherr, “Simultaneous Multiple Targeting Techniques”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 170-172.
- Ya. S. Derbenev, E. L. Saldin, and V. Shiltsev, “Microbunch Emittance Growth Due to Radiative Interaction”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP028G, pp. 1347-1349.
- A. Ageev et al., “Commissioning of the Beam Transfer Line to UNK”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2426-2429.
- K. M. Terwilliger, “Polarized Proton Beams at the AGS”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 809-814.
- P. Gayet, J. Casas-Cubillos, P. Gomes, M. Pezzetti, C.-H. Sicard, and F. J. Varas, “Application of Object-based Industrial Controls for Cryogenics”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO030, pp. 2013-2015.
- T. deParry and L. G. Ratner, “Evaluation of High Stability Secondary Emission Monitors”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 923-927.
- H. Sun, S. Gao, G. Qian, and D. Liang, “The Physical Mechanism of Ultra-Fast Automatic Cooling for Beams in the Six-Dimentional Emittance Space”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3696-3699.
- H. Suk, C. Kim, G. H. Kim, J. U. Kim, and H. J. Lee, “Electron Acceleration by Laser Wakefields in Tapered Plasma Densities”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG049, pp. 1912-1914.
Back to search