Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Fernandez Cortes, E. Blanco Vinuela, and L. A. Gonzalez, “Industrial Stepping Motors Integration in the UNICOS-CPC Framework”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1720-1724. doi:10.18429/JACoW-ICALEPCS2017-THPHA144
[n] D. A. Swenson, F. W. Guy, J. W. Lenz, K. R. Crandall, and J. M. Potter, “Status of the RFD Linac Prototype”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W027, pp. 1099-1101.
[n] B. Steffen et al., “Bunch Length Measurements at the SLS Linac Using Electro Optical Sampling”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS06, pp. XX-XX.
[n] J. A. Martin et al., “The 4 - Me V Separated-Orbit Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 479-482.
[n] R. D. Ryne, “Linac Beam Dynamics Codes: State of the Art and Perspectives”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGB03, pp. 194-194.
[n] K. F. Johnson et al., “The Single-Beam Funnel Demonstration: Experiment and Simulation”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH441, pp. 701-703.
[n] K. E. McGee et al., “First N-Doping and Mid-T Baking of Medium-?ƒ 644 MHz 5-Cell Elliptical Superconducting RF Cavities for Michigan State University??s Facility for Rare Isotope Beams”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 53. doi:10.18429/JACoW-SRF2021-SUPCAV018
[n] A. J. Jason et al., “Beam-Distribution System for Multi-Axis Imaging at the Advanced Hydrotest Facility”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH065, pp. 3374-3376.
[n] V. Chimenti, A. Clozza, H. Hsieh, and C. Vaccarezza, “DAPhiNE Vacuum System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1561-1564.
[n] K. Kiefer et al., “SECoP and SECoP@HMC - Metadata in the Sample Environment Communication Protocol”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1322-1324. doi:10.18429/JACoW-ICALEPCS2023-THPDP014
[n] R. Ruland et al., “Alignment of the VISA Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA134, pp. 1390-1392.
[n] L. Tkachenko et al., “Comparison of Three Designs of Wide Aperture Dipole for SIS300 Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF063, pp. 1747-1749.
[n] F. R. Osswald, T. Adam, P. G. Graehling, M. Heine, C. Maazouzi, and E. K. Traykov, “Transverse Phase Space Scanner Developments at IPHC”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 293-296. doi:10.18429/JACoW-IBIC2019-TUPP007
[n] E. B. Blum and R. Nawrocky, “Tune Measurement in the NSLS Booster Synchrotron”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2246-2249.
[n] E. Vogel et al., “Considerations on the third harmonic RF of the European XFEL”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP17, pp. XX-XX.
[n] M. L. Mallory, “Status Report on the 800 MeV Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper CC-02, pp. 197-202.
[n] P. Mortazavi and M. Thomas, “A Design Upgrade of the RF Cavity and Its Power Window for High Current Operation of the NSLS X-Ray Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ20, pp. 1768-1769.
[n] M. Borland et al., “Planned Use of Pulsed Crab Cavities for Short X-ray Pulse Generation at the Advanced Photon Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN091, pp. 1127-1129.
[n] R. Ostojic et al., “Quench Performance and Field Quality Measurements of the First LHC Low-$eta$ Quadrupole Model”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4C006, pp. 3209-3211.
[n] V. Sahakyan, V. G. Khachatryan, A. Tarloyan, and V. M. Tsakanov, “Impact of Focussing Lattice to European XFEL SAS101 Performance”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC44, pp. 596-598.
[n] P. Musumeci et al., “Status of the SPARC Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH029, pp. 110-112.
[n] S. Farina, J. H. Lee, J. P. S. Martins, and D. P. Piso, “MicroTCA Generic Data Acquisition Systems at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 118-124. doi:10.18429/JACoW-ICALEPCS2017-TUAPL01
[n] O. Kamalou et al., “GANIL Operation Status and Upgrade of SPIRAL1”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper FR1PB04, pp. 470-472.
[n] N. Yu. Kazarinov, I. A. Ivanenko, T. Adam, F. R. Osswald, and E. K. Traykov, “Focusing and Bunching of Ion Beam in Axial Injection Channel of IPHC Cyclotron TR24”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4733-4735. doi:10.18429/JACoW-IPAC2017-THPVA121
[n] M. Shimada and Y. Kobayashi, “Design of a 2-Loop Compact ERL”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper WG208, pp. 50-52.
[n] S. Krinsky and J. M. Wang, “Longitudinal Instabilities of Long Gaussian Bunches”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2495-2498.
[n] V. S. Avagyan, “Diffusion Brazing and Welding of the Accelerating Structure”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE046, pp. 2938-2940.
[n] J. Malka et al., “Data Management Infrastructure for European XFEL”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 952-957. doi:10.18429/JACoW-ICALEPCS2023-WE1BCO02
[n] T. L. Lavine et al., “SLC Polarized Beam Source Ultra-high-vacuum Design”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2284-2286.
[n] J. W. Lewellen, D. Gorelov, D. Perez, M. E. Schneider, and E. I. Simakov, “A Coupon Tester for Normal Conducting High-Gradient Materials”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1147-1150. doi:10.18429/JACoW-IPAC2021-MOPAB371
[n] B. Blind and A. J. Jason, “Laser Photoionization of H[degree] Beams for Charge-Changing Injection”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2795-2798.
[n] N. F. Ziegler et al., “Status Report on the Oak Ridge 25 MV Tandem Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2672-2675.
[n] E. Harms, “Operational Experience with the Fermilab Antiproton Source”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1999-2002.
[n] D. H. Fitzgerald et al., “Commissioning of the Los Alamos PSR Injection Upgrade”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THDL2, pp. 518-520.
[n] D. Einfeld, W. D. Klotz, G. Muelhaupt, T. Mueller, and R. Richter, “BESSY, A 800 MeV Storage Ring Dedicated to Synchrotron Radiation”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3801-3803.
[n] C. Sanelli and H. Hsieh, “Splitter Magnets for the DAPhiNE Project”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1373-1376.
[n] U. Ellenberger et al., “The SwissFEL C-band RF Pulse Compressor: Manufacturing and Proof of Precision by RF Measurements”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP056, pp. 859-863.
[n] E. Benedetto, I. V. Agapov, F. Follin, and V. Kain, “Fitting Algorithms for Optical and Beam Parameters in Transfer Lines with Application to the LHC Injection Line TI2”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP057, pp. 2647-2649.
[n] R. Pitthan, B. Bell, H. Friedsam, W. Oren, M. Pietryka, and R. Ruland, “Alignment of the Stanford Linear Collider Arcs-Concepts and Results”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1402-1405.
[n] J. A. Uythoven et al., “Results from the LHC Beam Dump Reliability Run”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP066, pp. 2671-2673.
[n] J. T. Bradley III, D. Rees, R. S. Przeklasa, and M. C. Scott, “Design, Construction and Operational Results of the IGBT Controlled Solid State Modulator High Voltage Power Supply Used in the High Power RF Systems of the Low Energy Demonstration Accelerator of the Accelerator Production of Tritium APT Project”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4071, pp. 561-563.
[n] T. J. P. Ellison, M. S. Ball, and B. J. Hamilton, “Betatron Ping" Tune Measurement System for the IUCF Cooler Synchrotron/Storage Ring"”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2243-2246.
[n] W. Maier et al., “The Novel Optical Notch Filter for Stochastic Cooling at the ESR”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO19, pp. 142-145.
[n] M. Ball et al., “Beam Motions Near Separatrix”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP32, pp. 1548-1550.
[n] M. L. Mallory and J. A. Nolen, “Rigidity Analogue Radioactive Beams from a Heavy Ion Cyclotron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 372-376.
[n] N. Alinovsky et al., “A Hydrogen Ion Beam Method of Molecular Density Measurement Inside a 4.2 K. Beam Tube”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2509-2512.
[n] I. Zagorodnov, K. Bane, and T. Weiland, “Calculation of Collimator Wakefields”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG035, pp. 3252-3254.
[n] M. Blaskiewicz et al., “Ring RF and Longitudinal Dynamics in the SNS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3B03, pp. 1942-1944.
[n] R. J. Jim?®nez Estupi???ín et al., “Enhancing the Detector Control System of the CMS Experiment with Object Oriented Modelling”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 145-148. doi:10.18429/JACoW-ICALEPCS2015-MOPGF025
[n] H. Freund and P. J. M. van der Slot, “MINERVA, a New Code to Model Free-Electron Lasers”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP020, pp. 408-411.
[n] J. P. S. Martins, S. Farina, J. H. Lee, and D. P. Piso, “MicroTCA.4 Integration at ESS: From the Front-End Electronics to the EPICS OPI”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1692-1694. doi:10.18429/JACoW-ICALEPCS2017-THPHA133
[n] T. Bergmark, K. Hedblom, L. Hermansson, A. Johansson, and D. Reistad, “Transverse Cooling Times and Cooled Beam Profiles at CELSIUS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP096L, pp. 1199-1202.
[n] S. Hunt, J. Adélise, D. Correia, W. D. Klotz, R. Seviour, and E. D. van Garderen, “A Medical Linac for Affordable Proton Therapy”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 167-169. doi:10.18429/JACoW-LINAC2022-MOPOGE10
[n] L. M. Young, D. E. Rees, L. J. Rybarcyk, and K. A. Cummings, “High Power RF Conditioning of the LEDA RFQ”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP90, pp. 881-883.
[n] M. L. Mallory, E. D. Hudson, and R. S. Lord, “Cyclotron Internal Ion Source with DC Extraction”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 147-151.
[n] F. Chautard and G. S?®n?®cal, “Operation Status of High Intensity Ion Beams at GANIL”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper TU-07, pp. 54-58.
[n] E. R. Beadle, E. S. Rodger, and R. E. Thern, “A Beam Scraper Using a Linear Motor”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1474-1477.
[n] I. Bogdanov et al., “Study of the Quench Process in Fast-cycling Dipole for the SIS300 Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF062, pp. 1744-1746.
[n] M. Dracos, E. Bouquerel, G. Fanourakis, G. Gokbulut, and A. Kayis Topaksu, “The European Spallation Source Neutrino Super Beam Design Study”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 582-585. doi:10.18429/JACoW-IPAC2019-MOPRB004
[n] M. M. Dehler et al., “Conceptual Design for SLS-2”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 150-153. doi:10.18429/JACoW-FLS2018-WEP2PT038
[n] V. Litvinenko et al., “Advances in Coherent Electron Cooling”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 91-94. doi:10.18429/JACoW-IPAC2014-MOPRO015
[n] J. Schivell and C. Schmidt, “Use of Subsurface Voids for Offsetting Saturation Effects in Quadrupole Magnets”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 864-865.
[n] F. Ciocci et al., “Spectral Properties of Planar Bi-Harmonic Undulators and Their Use for FEL Operation”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP013, pp. XX-XX.
[n] A. Yeremian, J. Adamski, and D. Shoffstall, “Computer-Automated Linac Diagnostics and Data Acquisition”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2279-2281.
[n] J. A. Martin, “Isochronous Cyclotron with Tandem Injector for Heavy Ion Acceleration”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 797-799.
[n] N. D. Arnold, R. T. Daly, M. R. Kraimer, W. P. McDowell, and G. J. Nawrocki, “I/O Subnets for the APS Control System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1496-1499.
[n] E. Bouquerel et al., “The ESSnuSB Target Station”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3831-3834. doi:10.18429/JACoW-IPAC2019-THPRB013
[n] B. Nguyen et al., “Design and characterization of adjustable-length pulse generator for beam kicker system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3803-3805. doi:10.18429/JACoW-IPAC2024-THPS30
[n] V. Villamayor Callejo et al., “Control and acquisition system for a radar-based IFMIF-DONES lithium target diagnostic”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper THPD044, unpublished.
[n] E. Trakhtenberg, P. K. Den Hartog, and G. E. Wiemerslage, “Extruded Aluminum Vacuum Chambers for Insertion Devices”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THOBS5, pp. 2093-2095.
[n] K. Hedblom, “Beam Dynamics in Synchrotrons with Two RF Systems”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 965-968.
[n] J. D. Gilpatrick et al., “LEDA and APT Beam Diagnostics Instrumentation”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P058, pp. 2232-2234.
[n] J. Bywater, T. Khoe, R. Lari, C. Potts, W. Praeg, and L. Ratner, “A Pulsed Quadrupole System for Preventing Depolarization”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 869-872.
[n] E. R. Beadle, “Fiber Optics in the BNL Booster Radiation Environment”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1493-1496.
[n] A. Yeremian, J. Adamski, W. Gallagher, R. Kennedy, J. Orthel, and L. Young, “Boeing 120 MeV RF Linac Injector Design and Accelerator Performance Comparison with PARMELA”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 657-660.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Fernandez Cortes, E. Blanco Vinuela, and L. A. Gonzalez, “Industrial Stepping Motors Integration in the UNICOS-CPC Framework”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1720-1724.
- D. A. Swenson, F. W. Guy, J. W. Lenz, K. R. Crandall, and J. M. Potter, “Status of the RFD Linac Prototype”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W027, pp. 1099-1101.
- B. Steffen et al., “Bunch Length Measurements at the SLS Linac Using Electro Optical Sampling”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS06, pp. XX-XX.
- J. A. Martin et al., “The 4 - Me V Separated-Orbit Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 479-482.
- R. D. Ryne, “Linac Beam Dynamics Codes: State of the Art and Perspectives”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGB03, pp. 194-194.
- K. F. Johnson et al., “The Single-Beam Funnel Demonstration: Experiment and Simulation”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH441, pp. 701-703.
- K. E. McGee et al., “First N-Doping and Mid-T Baking of Medium-?ƒ 644 MHz 5-Cell Elliptical Superconducting RF Cavities for Michigan State University??s Facility for Rare Isotope Beams”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 53.
- A. J. Jason et al., “Beam-Distribution System for Multi-Axis Imaging at the Advanced Hydrotest Facility”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH065, pp. 3374-3376.
- V. Chimenti, A. Clozza, H. Hsieh, and C. Vaccarezza, “DAPhiNE Vacuum System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1561-1564.
- K. Kiefer et al., “SECoP and SECoP@HMC - Metadata in the Sample Environment Communication Protocol”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP014, pp. 1322-1324.
- R. Ruland et al., “Alignment of the VISA Undulator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA134, pp. 1390-1392.
- L. Tkachenko et al., “Comparison of Three Designs of Wide Aperture Dipole for SIS300 Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF063, pp. 1747-1749.
- F. R. Osswald, T. Adam, P. G. Graehling, M. Heine, C. Maazouzi, and E. K. Traykov, “Transverse Phase Space Scanner Developments at IPHC”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 293-296.
- E. B. Blum and R. Nawrocky, “Tune Measurement in the NSLS Booster Synchrotron”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2246-2249.
- E. Vogel et al., “Considerations on the third harmonic RF of the European XFEL”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP17, pp. XX-XX.
- M. L. Mallory, “Status Report on the 800 MeV Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper CC-02, pp. 197-202.
- P. Mortazavi and M. Thomas, “A Design Upgrade of the RF Cavity and Its Power Window for High Current Operation of the NSLS X-Ray Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPQ20, pp. 1768-1769.
- M. Borland et al., “Planned Use of Pulsed Crab Cavities for Short X-ray Pulse Generation at the Advanced Photon Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN091, pp. 1127-1129.
- R. Ostojic et al., “Quench Performance and Field Quality Measurements of the First LHC Low-$eta$ Quadrupole Model”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4C006, pp. 3209-3211.
- V. Sahakyan, V. G. Khachatryan, A. Tarloyan, and V. M. Tsakanov, “Impact of Focussing Lattice to European XFEL SAS101 Performance”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC44, pp. 596-598.
- P. Musumeci et al., “Status of the SPARC Project”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH029, pp. 110-112.
- S. Farina, J. H. Lee, J. P. S. Martins, and D. P. Piso, “MicroTCA Generic Data Acquisition Systems at ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 118-124.
- O. Kamalou et al., “GANIL Operation Status and Upgrade of SPIRAL1”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper FR1PB04, pp. 470-472.
- N. Yu. Kazarinov, I. A. Ivanenko, T. Adam, F. R. Osswald, and E. K. Traykov, “Focusing and Bunching of Ion Beam in Axial Injection Channel of IPHC Cyclotron TR24”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4733-4735.
- M. Shimada and Y. Kobayashi, “Design of a 2-Loop Compact ERL”, in Proc. 45th ICFA Advanced Beam Dynamics Workshop on Energy Recovery LINAC Workshop (ERL'09), Ithaca, NY, USA, Jun. 2009, paper WG208, pp. 50-52.
- S. Krinsky and J. M. Wang, “Longitudinal Instabilities of Long Gaussian Bunches”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2495-2498.
- V. S. Avagyan, “Diffusion Brazing and Welding of the Accelerating Structure”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE046, pp. 2938-2940.
- J. Malka et al., “Data Management Infrastructure for European XFEL”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper WE1BCO02, pp. 952-957.
- T. L. Lavine et al., “SLC Polarized Beam Source Ultra-high-vacuum Design”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2284-2286.
- J. W. Lewellen, D. Gorelov, D. Perez, M. E. Schneider, and E. I. Simakov, “A Coupon Tester for Normal Conducting High-Gradient Materials”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1147-1150.
- B. Blind and A. J. Jason, “Laser Photoionization of H[degree] Beams for Charge-Changing Injection”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2795-2798.
- N. F. Ziegler et al., “Status Report on the Oak Ridge 25 MV Tandem Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2672-2675.
- E. Harms, “Operational Experience with the Fermilab Antiproton Source”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1999-2002.
- D. H. Fitzgerald et al., “Commissioning of the Los Alamos PSR Injection Upgrade”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THDL2, pp. 518-520.
- D. Einfeld, W. D. Klotz, G. Muelhaupt, T. Mueller, and R. Richter, “BESSY, A 800 MeV Storage Ring Dedicated to Synchrotron Radiation”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3801-3803.
- C. Sanelli and H. Hsieh, “Splitter Magnets for the DAPhiNE Project”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1373-1376.
- U. Ellenberger et al., “The SwissFEL C-band RF Pulse Compressor: Manufacturing and Proof of Precision by RF Measurements”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP056, pp. 859-863.
- E. Benedetto, I. V. Agapov, F. Follin, and V. Kain, “Fitting Algorithms for Optical and Beam Parameters in Transfer Lines with Application to the LHC Injection Line TI2”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP057, pp. 2647-2649.
- R. Pitthan, B. Bell, H. Friedsam, W. Oren, M. Pietryka, and R. Ruland, “Alignment of the Stanford Linear Collider Arcs-Concepts and Results”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1402-1405.
- J. A. Uythoven et al., “Results from the LHC Beam Dump Reliability Run”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP066, pp. 2671-2673.
- J. T. Bradley III, D. Rees, R. S. Przeklasa, and M. C. Scott, “Design, Construction and Operational Results of the IGBT Controlled Solid State Modulator High Voltage Power Supply Used in the High Power RF Systems of the Low Energy Demonstration Accelerator of the Accelerator Production of Tritium APT Project”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4071, pp. 561-563.
- T. J. P. Ellison, M. S. Ball, and B. J. Hamilton, “Betatron Ping" Tune Measurement System for the IUCF Cooler Synchrotron/Storage Ring"”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2243-2246.
- W. Maier et al., “The Novel Optical Notch Filter for Stochastic Cooling at the ESR”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper WEPPO19, pp. 142-145.
- M. Ball et al., “Beam Motions Near Separatrix”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP32, pp. 1548-1550.
- M. L. Mallory and J. A. Nolen, “Rigidity Analogue Radioactive Beams from a Heavy Ion Cyclotron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 372-376.
- N. Alinovsky et al., “A Hydrogen Ion Beam Method of Molecular Density Measurement Inside a 4.2 K. Beam Tube”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2509-2512.
- I. Zagorodnov, K. Bane, and T. Weiland, “Calculation of Collimator Wakefields”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG035, pp. 3252-3254.
- M. Blaskiewicz et al., “Ring RF and Longitudinal Dynamics in the SNS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3B03, pp. 1942-1944.
- R. J. Jim?®nez Estupi???ín et al., “Enhancing the Detector Control System of the CMS Experiment with Object Oriented Modelling”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 145-148.
- H. Freund and P. J. M. van der Slot, “MINERVA, a New Code to Model Free-Electron Lasers”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP020, pp. 408-411.
- J. P. S. Martins, S. Farina, J. H. Lee, and D. P. Piso, “MicroTCA.4 Integration at ESS: From the Front-End Electronics to the EPICS OPI”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1692-1694.
- T. Bergmark, K. Hedblom, L. Hermansson, A. Johansson, and D. Reistad, “Transverse Cooling Times and Cooled Beam Profiles at CELSIUS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP096L, pp. 1199-1202.
- S. Hunt, J. Adélise, D. Correia, W. D. Klotz, R. Seviour, and E. D. van Garderen, “A Medical Linac for Affordable Proton Therapy”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 167-169.
- L. M. Young, D. E. Rees, L. J. Rybarcyk, and K. A. Cummings, “High Power RF Conditioning of the LEDA RFQ”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP90, pp. 881-883.
- M. L. Mallory, E. D. Hudson, and R. S. Lord, “Cyclotron Internal Ion Source with DC Extraction”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 147-151.
- F. Chautard and G. S?®n?®cal, “Operation Status of High Intensity Ion Beams at GANIL”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper TU-07, pp. 54-58.
- E. R. Beadle, E. S. Rodger, and R. E. Thern, “A Beam Scraper Using a Linear Motor”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1474-1477.
- I. Bogdanov et al., “Study of the Quench Process in Fast-cycling Dipole for the SIS300 Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF062, pp. 1744-1746.
- M. Dracos, E. Bouquerel, G. Fanourakis, G. Gokbulut, and A. Kayis Topaksu, “The European Spallation Source Neutrino Super Beam Design Study”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 582-585.
- M. M. Dehler et al., “Conceptual Design for SLS-2”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 150-153.
- V. Litvinenko et al., “Advances in Coherent Electron Cooling”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 91-94.
- J. Schivell and C. Schmidt, “Use of Subsurface Voids for Offsetting Saturation Effects in Quadrupole Magnets”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 864-865.
- F. Ciocci et al., “Spectral Properties of Planar Bi-Harmonic Undulators and Their Use for FEL Operation”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP013, pp. XX-XX.
- A. Yeremian, J. Adamski, and D. Shoffstall, “Computer-Automated Linac Diagnostics and Data Acquisition”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2279-2281.
- J. A. Martin, “Isochronous Cyclotron with Tandem Injector for Heavy Ion Acceleration”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 797-799.
- N. D. Arnold, R. T. Daly, M. R. Kraimer, W. P. McDowell, and G. J. Nawrocki, “I/O Subnets for the APS Control System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1496-1499.
- E. Bouquerel et al., “The ESSnuSB Target Station”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3831-3834.
- B. Nguyen et al., “Design and characterization of adjustable-length pulse generator for beam kicker system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS30, pp. 3803-3805.
- V. Villamayor Callejo et al., “Control and acquisition system for a radar-based IFMIF-DONES lithium target diagnostic”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper THPD044, unpublished.
- E. Trakhtenberg, P. K. Den Hartog, and G. E. Wiemerslage, “Extruded Aluminum Vacuum Chambers for Insertion Devices”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THOBS5, pp. 2093-2095.
- K. Hedblom, “Beam Dynamics in Synchrotrons with Two RF Systems”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 965-968.
- J. D. Gilpatrick et al., “LEDA and APT Beam Diagnostics Instrumentation”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P058, pp. 2232-2234.
- J. Bywater, T. Khoe, R. Lari, C. Potts, W. Praeg, and L. Ratner, “A Pulsed Quadrupole System for Preventing Depolarization”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 869-872.
- E. R. Beadle, “Fiber Optics in the BNL Booster Radiation Environment”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1493-1496.
- A. Yeremian, J. Adamski, W. Gallagher, R. Kennedy, J. Orthel, and L. Young, “Boeing 120 MeV RF Linac Injector Design and Accelerator Performance Comparison with PARMELA”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 657-660.
Back to search