Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Andelfinger et al., “Status Report of the Experimental and Theoretical Investigations in the Garching Electron Ring Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4172-4177.
[n] A. Gotz et al., “TANGO Heads for Industry”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1195-1200. doi:10.18429/JACoW-ICALEPCS2017-THCPL05
[n] U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper THM2IS03, pp. 308-308.
[n] I. Ben-Zvi and D. Naik, “Ripple Structure in 56 MHz Quarter Wave Resonator for Multipacting Suppression”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP037, pp. 903-905.
[n] O. Kamalou, F. Chautard, and A. Savalle, “Stable and Exotic Beams Produced at GANIL”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 398-400. doi:10.18429/JACoW-Cyclotrons2016-FRB02
[n] A. Wolf et al., “Results from Electron Cooling Experiments at LEAR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 204-207.
[n] S. C. Duarte Pinto and J. Spanggaard, “Gas Electron Multipliers Versus Multi Wire Proportional Chambers”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUCL3, pp. 342-345.
[n] O. Kamalou et al., “GANIL Operation Status and New Range of Post-Accelerated Exotic Beams”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOA1C02, pp. 20-22.
[n] H. Reichau, O. Meusel, U. Ratzinger, and C. Wagner, “Optical Diagnostics for Frankfurt Neutron Source”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD60, pp. 443-445.
[n] P. Emma, P. R. Burchat, T. H. Fieguth, T. Lohse, and R. S. Panvini, “Online Monitoring of Dispersion Functions and Transfer Matrices at the SLC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1599-1602.
[n] D. A. Liakin, P. Forck, K. Lang, and R. Singh, “Advanced Digital Signal Processing for Effective Beam Position Monitoring”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD16, pp. 74-76.
[n] D. Gonnella et al., “RF Performance of Nitrogen-Doped Production SRF Cavities for LCLS-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1156-1159. doi:10.18429/JACoW-IPAC2017-MOPVA128
[n] N. Samadi, L. D. Chapman, L. O. Dallin, and X. Shi, “Source Size and Emittance Measurements for Low-Emittance Light Sources”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper THAO03, unpublished.
[n] G. T. Danby and J. W. Jackson, “Theory, Design and Measurement of the Brookhaven Narrow Quadrupoles”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 414-420.
[n] L. W. Funk, J. F. Tooker, T. Benke, and V. Oliphant, “Accelerator Readiness Review Process for the SSC Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1706-1709.
[n] U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WESEPP01, pp. 228-228.
[n] W. B. Herrmannsfeldt, “Linac Alignment Techniques”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 9-19.
[n] M. Giannini et al., “ELETTRA" Vacuum Chamber Design and Fabrication"”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2488-2491.
[n] V. Paxson, C. Aragon, S. Peggs, C. Saltmarsh, and L. Schachinger, “A Unified Approach to Building Accelerator Simulation Software for the SSC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 82-85.
[n] F. Varenne et al., “SPIRAL Facility: Beam Dynamics and Experimental Tests with Stable Ions”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-23, pp. XX-XX.
[n] B. Rusnak et al., “Development of a High Brightness Source for Fast Neutron Imaging”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1260-1264. doi:10.18429/JACoW-NAPAC2016-THB3IO01
[n] Q. Qin et al., “Overview of the CEPC Accelerator”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THP3H2, pp. 16-21.
[n] D. Cocq et al., “First Beam Tests for the Prototype LHC Orbit and Trajectory System in the CERN-SPS”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM17, pp. XX-XX.
[n] C. Gardner, L. Ahrens, and N. Williams, “Turn-by-Turn Analysis of Proton and Gold Beams at Injection in the AGS Booster”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA79, pp. 2063-2065.
[n] C. M. Ankenbrandt, J. E. Griffin, R. P. Johnson, J. Lackey, and K. Meisner, “Longitudinal Motion of the Beam in the Fermilab Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1449-1452.
[n] H. Hahn, L. R. Hammons, and D. Naik, “Ferrite-lined HOM Absorber for the e-Cool ERL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS095, pp. 3705-3707.
[n] R. Kazimi et al., “CEBAF Injector Achieved World's Best Beam Quality for Three Simultaneous Beams with a Wide Range of Bunch Charges”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT164, pp. 1512-1514.
[n] H. Grote, F. C. Iselin, E. Keil, and J. Niederer, “The MAD Program”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1292-1295.
[n] S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 280-284. doi:10.18429/JACoW-ICALEPCS2017-TUDPL01
[n] W. B. Herrmannsfeldt, “SLAC Alignment System”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IV-05, pp. 163-168.
[n] R. Connoly et al., “Results from Betatron Phase Measurements in RHIC during the Sextant Test”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP38C, pp. 365-367.
[n] J. Galambos et al., “SNS Global Database Use in Application Programming”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE016, pp. 2363-2365.
[n] B. T. Freemire et al., “High Pressure Gas-Filled RF Cavities for Use in a Muon Cooling Channel”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUODA1, pp. 419-421.
[n] S. V. Kutsaev, “Hellweg 2D Code for Electron Dynamics Simulations”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC053, pp. 1841-1843.
[n] W. Kleeven et al., “Status and Results from the TR30 Cycltron Centre Region Model”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 434-437.
[n] S. Howry, R. Johnson, J. Piccioni, and V. Waithman, “SLAC Control Room Consolidation -- Software Aspects”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 403-405.
[n] K. Nakajima et al., “Proof of Principle Experiments of Laser Wakefield Acceleration”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-42, pp. 798-800.
[n] J. L. Rothman and R. J. Nawrocky, “Active Interlock for Storage Ring Insertion Devices”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 266-268.
[n] S. Schaffner et al., “Device Control at CEBAF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR13, pp. 2265-2267.
[n] M. Farkhondeh et al., “Polarized Electron Beams for Nuclear Physics at the MIT Bates Accelerator Center”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper FPAE031, unpublished.
[n] J. Borer, A. Hofmann, J.-P. Koutchouk, T. Risselada, and B. Zotter, “Measurements of Betatron Phase Advance and Beta Function in the ISR”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2406-2409.
[n] R. Leroy et al., “The First Target Ion Source System for the SPIRAL Project: Results of the On Line Tests”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper D-09, pp. 366-368.
[n] H. Kim, F. Crosby, J. Fugitt, and R. Johnson, “A Unique Space Saving Accelerator Cavity Design”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2818-2821.
[n] R. Frankel and I. E. Pyros, “Computer Interface Design between a Master Computer and a Slave Computer for Simulation Control and Instrumentation Monotoring of the Brookhaven 200 MeV Linac Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 412-414.
[n] R. Wanzenberg et al., “Research Activities Towards a Conversion of PETRA III Into a Diffraction Limited Synchrotron Light Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3077-3080. doi:10.18429/JACoW-IPAC2017-WEPIK065
[n] S. Ferry, C. Bontoiu, P. Craievich, S. Di Mitri, and E. Karantzoulis, “FERMI@elettra Collimators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP043, pp. 2890-2892.
[n] S. M. Alzubaidi, O. Meusel, U. Ratzinger, and C. Wagner, “Control System for FRANZ Facility”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 830-832. doi:10.18429/JACoW-IPAC2015-MOPHA025
[n] J. A. MacLachlan, G. Nicholls, J. Nicholls, G. Silvestrov, and T. Vsevolozhskaya, “Pulsed High Current Optics for pbar Production at 5.4 GeV/c”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2785-2791.
[n] M. D. Salt, R. Appleby, K. Elsener, and A. Ferrari, “Photon Backgrounds at the CLIC Interaction Point due to Losses in the Post-Collision Extraction Line”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP070, pp. 2659-2661.
[n] K. Zagar, M. Plesko, R. Sabjan, and I. Verstovsek, “Co-sourcing Development of Accelerator Controls”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT097, pp. 758-760.
[n] D. Fryberger and R. Johnson, “An Innovation in Control Panels for Large Computer Control Systems”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 414-418.
[n] K. N. Leung, “Invited Paper: High-Intensity Sources for Light Ions”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper G-02, pp. 372-376.
[n] H. Pines, “Automatic Tuning of the LSL SuperHILAC Third Injector Transport Line”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2314-2317.
[n] R. D. Kohaupt, “Single Beam Instabilities in DORIS”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1456-1458.
[n] J. Maddocks and A. Yuecel, “The Heat Load of an 80 K Liner for the SSC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3879-3882.
[n] B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Andelfinger et al., “Status Report of the Experimental and Theoretical Investigations in the Garching Electron Ring Accelerator”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4172-4177.
- A. Gotz et al., “TANGO Heads for Industry”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1195-1200.
- U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper THM2IS03, pp. 308-308.
- I. Ben-Zvi and D. Naik, “Ripple Structure in 56 MHz Quarter Wave Resonator for Multipacting Suppression”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP037, pp. 903-905.
- O. Kamalou, F. Chautard, and A. Savalle, “Stable and Exotic Beams Produced at GANIL”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 398-400.
- A. Wolf et al., “Results from Electron Cooling Experiments at LEAR”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 204-207.
- S. C. Duarte Pinto and J. Spanggaard, “Gas Electron Multipliers Versus Multi Wire Proportional Chambers”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUCL3, pp. 342-345.
- O. Kamalou et al., “GANIL Operation Status and New Range of Post-Accelerated Exotic Beams”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOA1C02, pp. 20-22.
- H. Reichau, O. Meusel, U. Ratzinger, and C. Wagner, “Optical Diagnostics for Frankfurt Neutron Source”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD60, pp. 443-445.
- P. Emma, P. R. Burchat, T. H. Fieguth, T. Lohse, and R. S. Panvini, “Online Monitoring of Dispersion Functions and Transfer Matrices at the SLC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1599-1602.
- D. A. Liakin, P. Forck, K. Lang, and R. Singh, “Advanced Digital Signal Processing for Effective Beam Position Monitoring”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD16, pp. 74-76.
- D. Gonnella et al., “RF Performance of Nitrogen-Doped Production SRF Cavities for LCLS-II”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1156-1159.
- N. Samadi, L. D. Chapman, L. O. Dallin, and X. Shi, “Source Size and Emittance Measurements for Low-Emittance Light Sources”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper THAO03, unpublished.
- G. T. Danby and J. W. Jackson, “Theory, Design and Measurement of the Brookhaven Narrow Quadrupoles”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 414-420.
- L. W. Funk, J. F. Tooker, T. Benke, and V. Oliphant, “Accelerator Readiness Review Process for the SSC Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1706-1709.
- U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WESEPP01, pp. 228-228.
- W. B. Herrmannsfeldt, “Linac Alignment Techniques”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 9-19.
- M. Giannini et al., “ELETTRA" Vacuum Chamber Design and Fabrication"”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2488-2491.
- V. Paxson, C. Aragon, S. Peggs, C. Saltmarsh, and L. Schachinger, “A Unified Approach to Building Accelerator Simulation Software for the SSC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 82-85.
- F. Varenne et al., “SPIRAL Facility: Beam Dynamics and Experimental Tests with Stable Ions”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P2-23, pp. XX-XX.
- B. Rusnak et al., “Development of a High Brightness Source for Fast Neutron Imaging”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1260-1264.
- Q. Qin et al., “Overview of the CEPC Accelerator”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper THP3H2, pp. 16-21.
- D. Cocq et al., “First Beam Tests for the Prototype LHC Orbit and Trajectory System in the CERN-SPS”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PM17, pp. XX-XX.
- C. Gardner, L. Ahrens, and N. Williams, “Turn-by-Turn Analysis of Proton and Gold Beams at Injection in the AGS Booster”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA79, pp. 2063-2065.
- C. M. Ankenbrandt, J. E. Griffin, R. P. Johnson, J. Lackey, and K. Meisner, “Longitudinal Motion of the Beam in the Fermilab Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1449-1452.
- H. Hahn, L. R. Hammons, and D. Naik, “Ferrite-lined HOM Absorber for the e-Cool ERL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS095, pp. 3705-3707.
- R. Kazimi et al., “CEBAF Injector Achieved World's Best Beam Quality for Three Simultaneous Beams with a Wide Range of Bunch Charges”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT164, pp. 1512-1514.
- H. Grote, F. C. Iselin, E. Keil, and J. Niederer, “The MAD Program”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1292-1295.
- S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 280-284.
- W. B. Herrmannsfeldt, “SLAC Alignment System”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper IV-05, pp. 163-168.
- R. Connoly et al., “Results from Betatron Phase Measurements in RHIC during the Sextant Test”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP38C, pp. 365-367.
- J. Galambos et al., “SNS Global Database Use in Application Programming”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE016, pp. 2363-2365.
- B. T. Freemire et al., “High Pressure Gas-Filled RF Cavities for Use in a Muon Cooling Channel”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUODA1, pp. 419-421.
- S. V. Kutsaev, “Hellweg 2D Code for Electron Dynamics Simulations”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC053, pp. 1841-1843.
- W. Kleeven et al., “Status and Results from the TR30 Cycltron Centre Region Model”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 434-437.
- S. Howry, R. Johnson, J. Piccioni, and V. Waithman, “SLAC Control Room Consolidation -- Software Aspects”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 403-405.
- K. Nakajima et al., “Proof of Principle Experiments of Laser Wakefield Acceleration”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-42, pp. 798-800.
- J. L. Rothman and R. J. Nawrocky, “Active Interlock for Storage Ring Insertion Devices”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 266-268.
- S. Schaffner et al., “Device Control at CEBAF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR13, pp. 2265-2267.
- M. Farkhondeh et al., “Polarized Electron Beams for Nuclear Physics at the MIT Bates Accelerator Center”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE031, unpublished.
- J. Borer, A. Hofmann, J.-P. Koutchouk, T. Risselada, and B. Zotter, “Measurements of Betatron Phase Advance and Beta Function in the ISR”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2406-2409.
- R. Leroy et al., “The First Target Ion Source System for the SPIRAL Project: Results of the On Line Tests”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper D-09, pp. 366-368.
- H. Kim, F. Crosby, J. Fugitt, and R. Johnson, “A Unique Space Saving Accelerator Cavity Design”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2818-2821.
- R. Frankel and I. E. Pyros, “Computer Interface Design between a Master Computer and a Slave Computer for Simulation Control and Instrumentation Monotoring of the Brookhaven 200 MeV Linac Accelerator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 412-414.
- R. Wanzenberg et al., “Research Activities Towards a Conversion of PETRA III Into a Diffraction Limited Synchrotron Light Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3077-3080.
- S. Ferry, C. Bontoiu, P. Craievich, S. Di Mitri, and E. Karantzoulis, “FERMI@elettra Collimators”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP043, pp. 2890-2892.
- S. M. Alzubaidi, O. Meusel, U. Ratzinger, and C. Wagner, “Control System for FRANZ Facility”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 830-832.
- J. A. MacLachlan, G. Nicholls, J. Nicholls, G. Silvestrov, and T. Vsevolozhskaya, “Pulsed High Current Optics for pbar Production at 5.4 GeV/c”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2785-2791.
- M. D. Salt, R. Appleby, K. Elsener, and A. Ferrari, “Photon Backgrounds at the CLIC Interaction Point due to Losses in the Post-Collision Extraction Line”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP070, pp. 2659-2661.
- K. Zagar, M. Plesko, R. Sabjan, and I. Verstovsek, “Co-sourcing Development of Accelerator Controls”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT097, pp. 758-760.
- D. Fryberger and R. Johnson, “An Innovation in Control Panels for Large Computer Control Systems”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 414-418.
- K. N. Leung, “Invited Paper: High-Intensity Sources for Light Ions”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper G-02, pp. 372-376.
- H. Pines, “Automatic Tuning of the LSL SuperHILAC Third Injector Transport Line”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2314-2317.
- R. D. Kohaupt, “Single Beam Instabilities in DORIS”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1456-1458.
- J. Maddocks and A. Yuecel, “The Heat Load of an 80 K Liner for the SSC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3879-3882.
- B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
Back to search