Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Berkaev et al., “VEPP-2000 ELECTRON-POSITRON COLLIDER COMMISSIONING”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH03, pp. XX-XX.
[n] S. Nakamura et al., “High-quality Proton Beam Obtained by Combination of Phase Rotation and the Irradiation of the Intense Short-pulse Laser”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH155, pp. 3158-3160.
[n] T. Kachel et al., “First Experiments with Femtosecond Soft X-Ray Pulses at BESSY”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH063, pp. XX-XX.
[n] K. W. Shepard, “Development of a Very-Low-Velocity Superconducting Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1812-1815.
[n] H. Lim, D. H. Jeong, M. W. Lee, M. J. Lee, S. W. Shin, and J. Yi, “Design of a Radiotherapy Machine using the 6 MeV C-Band Standing-Wave Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1921-1923. doi:10.18429/JACoW-IPAC2016-TUPOY008
[n] D. R. S. Di Calafiori et al., “The CMS ECAL Detector Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THA002, pp. 633-635.
[n] M. Gourber-Pace, G. Kruk, and M. Misiowiec, “Status Report of the Measurement Service for the CERN Accelerator Logging”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP106, pp. 325-327.
[n] M. Fedorov et al., “In-Place Technology Replacement of a 24x7 Operational Facility: Key Lessons Learned and Success Strategies From the NIF Control System Modernization”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 949. doi:10.18429/JACoW-ICALEPCS2019-WEDPL01
[n] R. C. Niemann et al., “APS Storage Ring Vacuum System Development”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 29-32.
[n] C. Yao and N. P. Di Monte, “Initial Performance Results of the APS P0 Feedback System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA15, pp. 550-552.
[n] G. Maire, A. Kehrli, S. Ravat, and H. Coppier, “The Detector Safety System of NA62 Experiment”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC056, pp. 222-225.
[n] G. W. Foster, “Experience with Permanent Magnets in the Fermilab 8 GeV Line and Recycler Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUX02A, pp. 189-193.
[n] P. Chen and D. Yu, “Simulation Results of RF Coupler Controllable by Dielectric Fluid”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP129, pp. 1073-1075.
[n] P. G. O, T. A. Butler, M. T. Lynch, K. F. McKenna, M. B. Pongratz, and T. J. Zaugg, “A Linear Accelerator in Space - the Beam Experiment Aboard Rocket”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH454, pp. 739-742.
[n] C. Boucly, J. Borburgh, C. Bracco, E. Carlier, N. Magnin, and N. Voumard, “Operational Experience with a PLC Based Positioning System for a LHC Extraction Protection Element”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC068, pp. 254-257.
[n] J. Bobnar and K. Zagar, “BLED: A Top-down Approach to Accelerator Control System Design”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUAAULT03, pp. 537-539.
[n] R. B. Shurter, T. Cote, and J. D. Gilpatrick, “Analog Front-End Electronics for Beam Position Measurement on the Beam Halo Measurement”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH071, pp. 1378-1380.
[n] P. M. Markovich, K. W. Shepard, and G. P. Zinkann, “Status of RF Superconductivity at Argonne National Laboratory”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87D10, pp. XX-XX.
[n] J. Campmany, F. Becheri, J. Marcos, V. Massana, R. Petrocelli, and L. Ribo, “Upgrade of Magnetic Measurements Laboratory at ALBA Synchrotron”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 211-213. doi:10.18429/JACoW-MEDSI2018-WEPH06
[n] P. Ninin et al., “Refurbishing of the CERN PS Complex Personnel Protection System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC059, pp. 234-237.
[n] C. David, J. Jacob, A. Panzarella, J. P. Perrine, and J. L. Revol, “Construction of a Third RF Acceleration Unit for the ESRF Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP028L, pp. 1970-1972.
[n] K. W. Shepard, “Development of Superconducting Intermediate Velocity Cavities for the U.S. RIA Project”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper WEO08, pp. 539-543.
[n] S. Ravat, L. Deront, A. Kehrli, and X. Pons, “A Safety System for Experimental Magnets Based on CompactRIO”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC053, pp. 210-213.
[n] H. Jones, “Development of BPM electronics for TRIUMF’s BL4N”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 733-736. doi:10.18429/JACoW-IBIC2025-WEPMO08
[n] J. J. Jamroz, J. Forsberg, V. H. Hardion, V. Martos, and D. P. Spruce, “Timing System at MAX IV - Status and Development”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 984-987. doi:10.18429/JACoW-ICALEPCS2015-WEPGF120
[n] K. Egawa and T. M. Taylor, “Conceptual Design of a 5 T/mm Quadrupole for Linear Collider Final Focus”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 360-363.
[n] J. Gayde et al., “Alignment and Monitoring Systems for Accelerators and Experiments Based on BCAM - First Results and Benefits of Systems Developed for ATLAS, LHCb and HIE-ISOLDE”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1983-1985. doi:10.18429/JACoW-IPAC2018-WEPAF067
[n] T. Ladzinski et al., “The LHC Access System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP102, pp. 600-602.
[n] T. Gingold, G. Daniluk, M. Rizzi, J. Serrano, and T. W, “HydRA: A System-on-Chip to Run Software in Radiation-Exposed Areas”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 217-221. doi:10.18429/JACoW-ICALEPCS2023-MO4AO02
[n] A. V. Aleksandrov, I. Hofmann, and J.-M. Lagniel, “Summary Report of the Working Group B: Beam Dynamics in High Intensity Linacs”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper CPL02, pp. 485-486.
[n] G. Wustefeld, J. Feikes, K. Holldack, and P. Kuske, “Sub-Picosecond Electron Bunches in the BESSY Storage Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT051, pp. 1954-1956.
[n] H. Kapitza, P. G?Âttlicher, N. Heidbrook, and H. Schlarb, “FEL Disturbance by Ambient Magnetic Field Changes”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH012, pp. 74-76.
[n] R. B. Agustsson, J. J. Hartzell, and S. Storms, “Inductively Coupled Pulsed Energy Extraction System for 2G Wire-based Magnets”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEOCA2, pp. 725-727.
[n] R. B. Agustsson et al., “Normal Conducting Radio Frequency x-band Deflecting Cavity Fabrication and Validation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC046, pp. 3389-3391.
[n] E. Z. Barzi et al., “An Innovative Nb3Sn Film Approach and Its Potential for SRF Applications”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 513-515. doi:10.18429/JACoW-LINAC2018-TUPO076
[n] M. Belgroune et al., “Status of the ALBA Project”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper POS01, pp. XX-XX.
[n] M. Schneider, A. Adelmann, N. Pogue, and L. Stingelin, “Suppression of RF Radiation Originating from the Flattop Cavity in the PSI Ring Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 348-350. doi:10.18429/JACoW-Cyclotrons2016-THP18
[n] J. Pasternak and L. J. Jenner, “Design of a Rapid Cycling Synchrotron for the Final Stage of Acceleration in a Common Proton Driver for a Neutrino Factory and a Spallation Neutron Source Based on Megawatt Upgrades to ISIS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS103, pp. 2751-2753.
[n] J. Wei, W. Fischer, V. Ptitsin, R. Ostojic, and J. Strait, “Interaction Region Local Correction for the Large Hadron Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA143, pp. 2921-2923.
[n] D. F. C. Fernandez-Carreiras et al., “The Design of the Alba Control System: A Cost-Effective Distributed Hardware and Software Architecture.”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRBHMUST01, pp. 1318-1321.
[n] S. Zelazny et al., “Orbit Display's Use of the Physics Application Framework for LCLS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THC004, pp. 673-675.
[n] A. Burov et al., “Status of High Energy Electron Cooling in FNAL Recycler Ring”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper WEBO02, pp. XX-XX.
[n] J. B?ñhr et al., “Diagnostics for the Photon Injector Test Facility in Desy Zeuthen”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS21, pp. XX-XX.
[n] A. W. Chao and M. J. Lee, “Vertical Beam Size Due to Orbit and Alignment Errors”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1203-1205.
[n] M. Crane et al., “Network Upgrade for the SLC: PEP-II Network”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P049, pp. 2473-2475.
[n] V. Chouhan et al., “Vertical Electropolishing of 1.3 GHz Niobium Nine-cell SRF Cavity: Bulk Removal and RF Performance”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 491-493. doi:10.18429/JACoW-LINAC2018-TUPO068
[n] J. Krempasky, U. Flechsig, B. Kalantari, X. Q. Wang, T. Mooney, and M. L. Rivers, “10 Years of Experiment Control at SLS Beam Lines: an Outlook to SwissFEL”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC066, pp. 729-732.
[n] S. M. Hanna and J. Keane, “Analysis and Applications of Quadrature Hybrids as RF Circulators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1118-1121.
[n] J. D. Gilpatrick, D. Barr, D. Martinez, J. F. O, R. B. Shurter, and M. Stettler, “Beam Position Measurements at Los Alamos: Isotope Production Facility and Switchyard Kicker Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB046, pp. 2512-2514.
[n] K. C. D. Chan et al., “Progress of APT Superconducting Linac Engineering Development”, presented at the LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4097, unpublished.
[n] K. E. Deitrick et al., “A Hard X-Ray Compact Compton Source at CBETA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1604-1605. doi:10.18429/JACoW-IPAC2019-TUPGW085
[n] F. Zhu et al., “Measurements on Particle Contamination During Cavity Assembly”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP52, pp. 466-469.
[n] P. G. O, L. D. Hansborough, and T. J. Zaugg, “Compact Emittance Scanners for MeV Particle Beams”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1553-1556.
[n] Q. Kerns et al., “Energy Saver Prototype Accelerating Resonator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2782-2785.
[n] J. Aron et al., “Status of the Argonne Superconducting-Linac Heavy-Ion Booster”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S2-8, pp. 104-108.
[n] F. T. Cole, “A Periodic Plasma Waveguide Accelerator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3486-3489.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Berkaev et al., “VEPP-2000 ELECTRON-POSITRON COLLIDER COMMISSIONING”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper TUACH03, pp. XX-XX.
- S. Nakamura et al., “High-quality Proton Beam Obtained by Combination of Phase Rotation and the Irradiation of the Intense Short-pulse Laser”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH155, pp. 3158-3160.
- T. Kachel et al., “First Experiments with Femtosecond Soft X-Ray Pulses at BESSY”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH063, pp. XX-XX.
- K. W. Shepard, “Development of a Very-Low-Velocity Superconducting Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1812-1815.
- H. Lim, D. H. Jeong, M. W. Lee, M. J. Lee, S. W. Shin, and J. Yi, “Design of a Radiotherapy Machine using the 6 MeV C-Band Standing-Wave Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1921-1923.
- D. R. S. Di Calafiori et al., “The CMS ECAL Detector Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THA002, pp. 633-635.
- M. Gourber-Pace, G. Kruk, and M. Misiowiec, “Status Report of the Measurement Service for the CERN Accelerator Logging”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP106, pp. 325-327.
- M. Fedorov et al., “In-Place Technology Replacement of a 24x7 Operational Facility: Key Lessons Learned and Success Strategies From the NIF Control System Modernization”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 949.
- R. C. Niemann et al., “APS Storage Ring Vacuum System Development”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 29-32.
- C. Yao and N. P. Di Monte, “Initial Performance Results of the APS P0 Feedback System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA15, pp. 550-552.
- G. Maire, A. Kehrli, S. Ravat, and H. Coppier, “The Detector Safety System of NA62 Experiment”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC056, pp. 222-225.
- G. W. Foster, “Experience with Permanent Magnets in the Fermilab 8 GeV Line and Recycler Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUX02A, pp. 189-193.
- P. Chen and D. Yu, “Simulation Results of RF Coupler Controllable by Dielectric Fluid”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP129, pp. 1073-1075.
- P. G. O, T. A. Butler, M. T. Lynch, K. F. McKenna, M. B. Pongratz, and T. J. Zaugg, “A Linear Accelerator in Space - the Beam Experiment Aboard Rocket”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH454, pp. 739-742.
- C. Boucly, J. Borburgh, C. Bracco, E. Carlier, N. Magnin, and N. Voumard, “Operational Experience with a PLC Based Positioning System for a LHC Extraction Protection Element”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC068, pp. 254-257.
- J. Bobnar and K. Zagar, “BLED: A Top-down Approach to Accelerator Control System Design”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUAAULT03, pp. 537-539.
- R. B. Shurter, T. Cote, and J. D. Gilpatrick, “Analog Front-End Electronics for Beam Position Measurement on the Beam Halo Measurement”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH071, pp. 1378-1380.
- P. M. Markovich, K. W. Shepard, and G. P. Zinkann, “Status of RF Superconductivity at Argonne National Laboratory”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87D10, pp. XX-XX.
- J. Campmany, F. Becheri, J. Marcos, V. Massana, R. Petrocelli, and L. Ribo, “Upgrade of Magnetic Measurements Laboratory at ALBA Synchrotron”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 211-213.
- P. Ninin et al., “Refurbishing of the CERN PS Complex Personnel Protection System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC059, pp. 234-237.
- C. David, J. Jacob, A. Panzarella, J. P. Perrine, and J. L. Revol, “Construction of a Third RF Acceleration Unit for the ESRF Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP028L, pp. 1970-1972.
- K. W. Shepard, “Development of Superconducting Intermediate Velocity Cavities for the U.S. RIA Project”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper WEO08, pp. 539-543.
- S. Ravat, L. Deront, A. Kehrli, and X. Pons, “A Safety System for Experimental Magnets Based on CompactRIO”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC053, pp. 210-213.
- H. Jones, “Development of BPM electronics for TRIUMF’s BL4N”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 733-736.
- J. J. Jamroz, J. Forsberg, V. H. Hardion, V. Martos, and D. P. Spruce, “Timing System at MAX IV - Status and Development”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 984-987.
- K. Egawa and T. M. Taylor, “Conceptual Design of a 5 T/mm Quadrupole for Linear Collider Final Focus”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 360-363.
- J. Gayde et al., “Alignment and Monitoring Systems for Accelerators and Experiments Based on BCAM - First Results and Benefits of Systems Developed for ATLAS, LHCb and HIE-ISOLDE”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1983-1985.
- T. Ladzinski et al., “The LHC Access System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP102, pp. 600-602.
- T. Gingold, G. Daniluk, M. Rizzi, J. Serrano, and T. W, “HydRA: A System-on-Chip to Run Software in Radiation-Exposed Areas”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO4AO02, pp. 217-221.
- A. V. Aleksandrov, I. Hofmann, and J.-M. Lagniel, “Summary Report of the Working Group B: Beam Dynamics in High Intensity Linacs”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper CPL02, pp. 485-486.
- G. Wustefeld, J. Feikes, K. Holldack, and P. Kuske, “Sub-Picosecond Electron Bunches in the BESSY Storage Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT051, pp. 1954-1956.
- H. Kapitza, P. G?Âttlicher, N. Heidbrook, and H. Schlarb, “FEL Disturbance by Ambient Magnetic Field Changes”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH012, pp. 74-76.
- R. B. Agustsson, J. J. Hartzell, and S. Storms, “Inductively Coupled Pulsed Energy Extraction System for 2G Wire-based Magnets”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEOCA2, pp. 725-727.
- R. B. Agustsson et al., “Normal Conducting Radio Frequency x-band Deflecting Cavity Fabrication and Validation”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC046, pp. 3389-3391.
- E. Z. Barzi et al., “An Innovative Nb3Sn Film Approach and Its Potential for SRF Applications”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 513-515.
- M. Belgroune et al., “Status of the ALBA Project”, in Proc. 37th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'06), Hamburg, Germany, May 2006, paper POS01, pp. XX-XX.
- M. Schneider, A. Adelmann, N. Pogue, and L. Stingelin, “Suppression of RF Radiation Originating from the Flattop Cavity in the PSI Ring Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 348-350.
- J. Pasternak and L. J. Jenner, “Design of a Rapid Cycling Synchrotron for the Final Stage of Acceleration in a Common Proton Driver for a Neutrino Factory and a Spallation Neutron Source Based on Megawatt Upgrades to ISIS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS103, pp. 2751-2753.
- J. Wei, W. Fischer, V. Ptitsin, R. Ostojic, and J. Strait, “Interaction Region Local Correction for the Large Hadron Collider”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA143, pp. 2921-2923.
- D. F. C. Fernandez-Carreiras et al., “The Design of the Alba Control System: A Cost-Effective Distributed Hardware and Software Architecture.”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRBHMUST01, pp. 1318-1321.
- S. Zelazny et al., “Orbit Display's Use of the Physics Application Framework for LCLS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THC004, pp. 673-675.
- A. Burov et al., “Status of High Energy Electron Cooling in FNAL Recycler Ring”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper WEBO02, pp. XX-XX.
- J. B?ñhr et al., “Diagnostics for the Photon Injector Test Facility in Desy Zeuthen”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PS21, pp. XX-XX.
- A. W. Chao and M. J. Lee, “Vertical Beam Size Due to Orbit and Alignment Errors”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1203-1205.
- M. Crane et al., “Network Upgrade for the SLC: PEP-II Network”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P049, pp. 2473-2475.
- V. Chouhan et al., “Vertical Electropolishing of 1.3 GHz Niobium Nine-cell SRF Cavity: Bulk Removal and RF Performance”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 491-493.
- J. Krempasky, U. Flechsig, B. Kalantari, X. Q. Wang, T. Mooney, and M. L. Rivers, “10 Years of Experiment Control at SLS Beam Lines: an Outlook to SwissFEL”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC066, pp. 729-732.
- S. M. Hanna and J. Keane, “Analysis and Applications of Quadrature Hybrids as RF Circulators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1118-1121.
- J. D. Gilpatrick, D. Barr, D. Martinez, J. F. O, R. B. Shurter, and M. Stettler, “Beam Position Measurements at Los Alamos: Isotope Production Facility and Switchyard Kicker Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB046, pp. 2512-2514.
- K. C. D. Chan et al., “Progress of APT Superconducting Linac Engineering Development”, presented at the 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4097, unpublished.
- K. E. Deitrick et al., “A Hard X-Ray Compact Compton Source at CBETA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1604-1605.
- F. Zhu et al., “Measurements on Particle Contamination During Cavity Assembly”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP52, pp. 466-469.
- P. G. O, L. D. Hansborough, and T. J. Zaugg, “Compact Emittance Scanners for MeV Particle Beams”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1553-1556.
- Q. Kerns et al., “Energy Saver Prototype Accelerating Resonator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2782-2785.
- J. Aron et al., “Status of the Argonne Superconducting-Linac Heavy-Ion Booster”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S2-8, pp. 104-108.
- F. T. Cole, “A Periodic Plasma Waveguide Accelerator”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3486-3489.
Back to search