Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Neff et al., “Heavy Ion Beam Transport in Plasma Channels”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT021, pp. 1183-1185.
[n] K. H. Kim, S. Allison, T. Straumann, and E. Williams, “Real-Time Performance Improvements and Consideration of Parallel Processing for Beam Synchronous Acquisition (BSA)”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 992-994. doi:10.18429/JACoW-ICALEPCS2015-WEPGF122
[n] F. Amand, M. Pavleski, M. Plesko, and L. Fernandez, “GUI Style Guide for Control System Applications at ESS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1047-1048. doi:10.18429/JACoW-ICALEPCS2015-WEPGF146
[n] Y. P. Liu et al., “Cryogenic system for BEPCII superconducting cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP19, pp. XX-XX.
[n] E. Nelson, “A 2D Field Solver for Periodic Structures with Special Corner Elements”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 722-725.
[n] W. Zhang, J. Bunicci, P. R. Cameron, A. V. Soukas, and W. van Asselt, “AGS Booster Tune Meter Kickers”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1216-1219.
[n] J.-M. Zentler, R. D. Van Maren, and W. E. Nexsen, “Improved Focus Solenoid Design for Linear Induction Accelerators”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-52, pp. 459-461.
[n] S. Krinsky and J. M. Wang, “Longitudinal Instabilities of Long Gaussian Bunches”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2495-2498.
[n] L. Tkachenko et al., “Comparison of Three Designs of Wide Aperture Dipole for SIS300 Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF063, pp. 1747-1749.
[n] J. Borer et al., “The LEP Beam Orbit Measurement System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 778-783.
[n] J. Y. Benitez et al., “Current Developments of the VENUS Ion Source in Research and Operations”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper THXO02, pp. 153-158.
[n] R. W. Castor and J. Abraham, “Performance Characteristics of the Zero Gradient Synchrotron Linac Automatic Gradient Stabilizer”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper II-07, pp. 78-82.
[n] S. Levenson et al., “Chemical robustness enhancement of negative electron affinity photocathodes through cesium-iodide deposition”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 646-649. doi:10.18429/JACoW-IPAC2024-MOPR82
[n] P. Colestock, J. Griffin, G. Jackson, C. Jensen, J. Lackey, and X. Lu, “An Investigation of the Source of a Low-Q, Low-frequency Impedance Disrupting Bunch Coalescing in the Fermilab Main Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1740-1743.
[n] A. J. Otter, N. Marks, and P. A. Reeve, “Combined AC Corrector Magnets”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2898-2901.
[n] J. Clark et al., “Design and Initial Operation of the ETA-II Induction Accelerator”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO2-01, pp. 19-23.
[n] K. M. Terwilliger, “Polarized Proton Beams at the AGS”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 809-814.
[n] M. Barton et al., “Performance Report on the Post Conversion AGS”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 226-231.
[n] S. Banna, L. Schaechter, and R. H. Siemann, “Surface Roughness Effect on a Moving Bunch”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG036, pp. 1879-1881.
[n] Y. Xiao, “CEPC Civil Engineering Design”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 264. doi:10.18429/JACoW-eeFACT2018-WEPAB02
[n] L. Harwood, J. R. Delayen, D. R. Douglas, V. Lebedev, C. Leemann, and L. Merminga, “Issues in Acceleration of a Muon Beam for a Neutrino Factory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH067, pp. 3380-3382.
[n] J. A. Vasquez, J. M. D, K. H. Kim, T. Straumann, and E. Williams, “YCPSWASYN: EPICS Driver for FPGA Register Access and Asynchronous Messaging”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1707-1709. doi:10.18429/JACoW-ICALEPCS2017-THPHA138
[n] T. Lee, J. Choi, G. H. Kim, and M. Yoon, “Analysis of the Effects of Superconducting Wiggler on Beam Dynamics in Storage Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1030-1033.
[n] J. E. Spencer et al., “Beam Dynamics Measurements for the SLAC Laser Acceleration Experiment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS055, pp. 3115-3117.
[n] A. M. J. Paans et al., “The Production and Imaging of 55Co Labelled Bleomycin”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper GP-04, pp. 699-701.
[n] J. Klabunde, E. Malwitz, J. Friedrich, and A. Schempp, “Upgrade of the HLI-RFQ Accelerator (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-06, pp. 704-706.
[n] J. E. Allinger et al., “Tests of a 3 Meter Curved Superconducting Beam Transport Dipole Magnet”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3231-3234.
[n] F. Loyer et al., “Main Beam Diagnostics at GANIL”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper FP-02, pp. 585-587.
[n] R. Althaus et al., “Training of LBL-SSC Model Dipole Magnets at 1.8K”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1780-1783.
[n] N. Alinovsky et al., “A Hydrogen Ion Beam Method of Molecular Density Measurement Inside a 4.2 K. Beam Tube”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2509-2512.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Neff et al., “Heavy Ion Beam Transport in Plasma Channels”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT021, pp. 1183-1185.
- K. H. Kim, S. Allison, T. Straumann, and E. Williams, “Real-Time Performance Improvements and Consideration of Parallel Processing for Beam Synchronous Acquisition (BSA)”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 992-994.
- F. Amand, M. Pavleski, M. Plesko, and L. Fernandez, “GUI Style Guide for Control System Applications at ESS”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1047-1048.
- Y. P. Liu et al., “Cryogenic system for BEPCII superconducting cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP19, pp. XX-XX.
- E. Nelson, “A 2D Field Solver for Periodic Structures with Special Corner Elements”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 722-725.
- W. Zhang, J. Bunicci, P. R. Cameron, A. V. Soukas, and W. van Asselt, “AGS Booster Tune Meter Kickers”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1216-1219.
- J.-M. Zentler, R. D. Van Maren, and W. E. Nexsen, “Improved Focus Solenoid Design for Linear Induction Accelerators”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-52, pp. 459-461.
- S. Krinsky and J. M. Wang, “Longitudinal Instabilities of Long Gaussian Bunches”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2495-2498.
- L. Tkachenko et al., “Comparison of Three Designs of Wide Aperture Dipole for SIS300 Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF063, pp. 1747-1749.
- J. Borer et al., “The LEP Beam Orbit Measurement System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 778-783.
- J. Y. Benitez et al., “Current Developments of the VENUS Ion Source in Research and Operations”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper THXO02, pp. 153-158.
- R. W. Castor and J. Abraham, “Performance Characteristics of the Zero Gradient Synchrotron Linac Automatic Gradient Stabilizer”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper II-07, pp. 78-82.
- S. Levenson et al., “Chemical robustness enhancement of negative electron affinity photocathodes through cesium-iodide deposition”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR82, pp. 646-649.
- P. Colestock, J. Griffin, G. Jackson, C. Jensen, J. Lackey, and X. Lu, “An Investigation of the Source of a Low-Q, Low-frequency Impedance Disrupting Bunch Coalescing in the Fermilab Main Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1740-1743.
- A. J. Otter, N. Marks, and P. A. Reeve, “Combined AC Corrector Magnets”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2898-2901.
- J. Clark et al., “Design and Initial Operation of the ETA-II Induction Accelerator”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO2-01, pp. 19-23.
- K. M. Terwilliger, “Polarized Proton Beams at the AGS”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 809-814.
- M. Barton et al., “Performance Report on the Post Conversion AGS”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 226-231.
- S. Banna, L. Schaechter, and R. H. Siemann, “Surface Roughness Effect on a Moving Bunch”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG036, pp. 1879-1881.
- Y. Xiao, “CEPC Civil Engineering Design”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 264.
- L. Harwood, J. R. Delayen, D. R. Douglas, V. Lebedev, C. Leemann, and L. Merminga, “Issues in Acceleration of a Muon Beam for a Neutrino Factory”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH067, pp. 3380-3382.
- J. A. Vasquez, J. M. D, K. H. Kim, T. Straumann, and E. Williams, “YCPSWASYN: EPICS Driver for FPGA Register Access and Asynchronous Messaging”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1707-1709.
- T. Lee, J. Choi, G. H. Kim, and M. Yoon, “Analysis of the Effects of Superconducting Wiggler on Beam Dynamics in Storage Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1030-1033.
- J. E. Spencer et al., “Beam Dynamics Measurements for the SLAC Laser Acceleration Experiment”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS055, pp. 3115-3117.
- A. M. J. Paans et al., “The Production and Imaging of 55Co Labelled Bleomycin”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper GP-04, pp. 699-701.
- J. Klabunde, E. Malwitz, J. Friedrich, and A. Schempp, “Upgrade of the HLI-RFQ Accelerator (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-06, pp. 704-706.
- J. E. Allinger et al., “Tests of a 3 Meter Curved Superconducting Beam Transport Dipole Magnet”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3231-3234.
- F. Loyer et al., “Main Beam Diagnostics at GANIL”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper FP-02, pp. 585-587.
- R. Althaus et al., “Training of LBL-SSC Model Dipole Magnets at 1.8K”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1780-1783.
- N. Alinovsky et al., “A Hydrogen Ion Beam Method of Molecular Density Measurement Inside a 4.2 K. Beam Tube”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2509-2512.
Back to search