Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Balsamo, N. M. Fewell, J. D. Klein, and R. L. Witkover, “Long Radiation Detector System for Beam Loss Monitoring”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1807-1810.
[n] R. H. Siemann and D. P. Pritzkau, “Results of an RF Pulsed Heating Experiment at SLAC”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA18, pp. 779-781.
[n] G. Torrisi et al., “Design of a Microwave Frequency Sweep Interferometer for Plasma Density Measurements in ECR Ion Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2512-2514. doi:10.18429/JACoW-IPAC2015-WEPWA012
[n] K.-J. Kang and B. Dwersteg, “The Computer Aided Test System for RF Superconducting Cavity High-Q Measurement”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91E16, pp. XX-XX.
[n] J. A. Martin, J. B. Ball, E. D. Hudson, R. S. Lord, G. S. McNeilly, and S. W. Mosko, “Design Status of a Separated-Sector Cyclotron Booster Accelerator for the Holifield Heavy Ion Research Facility”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1165-1168.
[n] D. Friesel et al., “Design and Construction Progress on the IUCF Midwest Proton Radiation Institute”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI086, pp. 2736-2738.
[n] F. Krawczyk, J. Gioia, B. Haynes, R. Lujan, B. Rusnak, and B. Smith, “The Power Coupler Design for the APT Superconducting Accelerator”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C39, pp. 762-768.
[n] D. J. Ciardullo et al., “The AGS Booster Beam Position Monitor System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1347-1350.
[n] P. Hartmann, J. Fuersch, D. Schirmer, T. Weis, and K. Wille, “Experience with Libera Beam Position Monitors at DELTA”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB21, pp. 111-113.
[n] A. Jain et al., “Field Calculation and Measurement of a Full-Length Snake Magnet for RHIC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP05F, pp. 2005-2007.
[n] U. Wienands et al., “Status of the High Energy Ring of the PEP II B-Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA04, pp. 530-532.
[n] H. P. Hsueh et al., “The Installation of One 14 Meter Cell of TPS Vacuum System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS031, pp. 1599-1601.
[n] V. Nuttens et al., “Cyclotron Vacuum Model and H- Gas Stripping Losses”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP075, pp. 200-202.
[n] J. Dedic, D. Golob, A. Hasanovic, and M. Plesko, “Extremely Low-jitter FPGA Based Synchronization Timing System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN063, pp. 296-298.
[n] J. Lorkiewicz et al., “Activities at NCBJ Towards Development of the Future, Fully-Superconducting, XFEL-Type, RF Electron Gun”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 566. doi:10.18429/JACoW-SRF2021-WEPFDV006
[n] V. Kamerdzhiev et al., “Progress of the Machine Control Upgrade at COSY/J??LICH”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2473-2476. doi:10.18429/JACoW-IPAC2019-WEPGW007
[n] L. Bertolini et al., “Interaction Region Vacuum System Design at the PEP-II B-Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8C007, pp. 3562-3564.
[n] A. Peters, R. Cee, Th. Haberer, and T. Winkelmann, “The HIT Accelerator as Part of a Medical Product: Impacts on the Maintenance Strategy”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA005, pp. 3639-3641.
[n] S. Oh et al., “The Proposed University of Manitoba Polarised and Unpolarised Light Ion Facility”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2089-2092.
[n] M. Libkind, L. Bertolini, P. Duffy, R. Carr, G. Rakowsky, and J. Skaritka, “Mechanical Design of the VISA Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP93, pp. 2477-2479.
[n] H. P. Hsueh et al., “The Optimization of Transverse Stripline Kicker”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA059, pp. 214-216.
[n] K. Zagar et al., “Predictive Diagnostics for High-availability Accelerators”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA087, pp. 873-875.
[n] M. Kadunc et al., “Deployment of Abeans Release 3 for the TINE Control System at DESY”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP506, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Balsamo, N. M. Fewell, J. D. Klein, and R. L. Witkover, “Long Radiation Detector System for Beam Loss Monitoring”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1807-1810.
- R. H. Siemann and D. P. Pritzkau, “Results of an RF Pulsed Heating Experiment at SLAC”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THA18, pp. 779-781.
- G. Torrisi et al., “Design of a Microwave Frequency Sweep Interferometer for Plasma Density Measurements in ECR Ion Sources”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2512-2514.
- K.-J. Kang and B. Dwersteg, “The Computer Aided Test System for RF Superconducting Cavity High-Q Measurement”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91E16, pp. XX-XX.
- J. A. Martin, J. B. Ball, E. D. Hudson, R. S. Lord, G. S. McNeilly, and S. W. Mosko, “Design Status of a Separated-Sector Cyclotron Booster Accelerator for the Holifield Heavy Ion Research Facility”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1165-1168.
- D. Friesel et al., “Design and Construction Progress on the IUCF Midwest Proton Radiation Institute”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI086, pp. 2736-2738.
- F. Krawczyk, J. Gioia, B. Haynes, R. Lujan, B. Rusnak, and B. Smith, “The Power Coupler Design for the APT Superconducting Accelerator”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C39, pp. 762-768.
- D. J. Ciardullo et al., “The AGS Booster Beam Position Monitor System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1347-1350.
- P. Hartmann, J. Fuersch, D. Schirmer, T. Weis, and K. Wille, “Experience with Libera Beam Position Monitors at DELTA”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB21, pp. 111-113.
- A. Jain et al., “Field Calculation and Measurement of a Full-Length Snake Magnet for RHIC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP05F, pp. 2005-2007.
- U. Wienands et al., “Status of the High Energy Ring of the PEP II B-Factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA04, pp. 530-532.
- H. P. Hsueh et al., “The Installation of One 14 Meter Cell of TPS Vacuum System”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS031, pp. 1599-1601.
- V. Nuttens et al., “Cyclotron Vacuum Model and H- Gas Stripping Losses”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP075, pp. 200-202.
- J. Dedic, D. Golob, A. Hasanovic, and M. Plesko, “Extremely Low-jitter FPGA Based Synchronization Timing System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN063, pp. 296-298.
- J. Lorkiewicz et al., “Activities at NCBJ Towards Development of the Future, Fully-Superconducting, XFEL-Type, RF Electron Gun”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 566.
- V. Kamerdzhiev et al., “Progress of the Machine Control Upgrade at COSY/J??LICH”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2473-2476.
- L. Bertolini et al., “Interaction Region Vacuum System Design at the PEP-II B-Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8C007, pp. 3562-3564.
- A. Peters, R. Cee, Th. Haberer, and T. Winkelmann, “The HIT Accelerator as Part of a Medical Product: Impacts on the Maintenance Strategy”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA005, pp. 3639-3641.
- S. Oh et al., “The Proposed University of Manitoba Polarised and Unpolarised Light Ion Facility”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2089-2092.
- M. Libkind, L. Bertolini, P. Duffy, R. Carr, G. Rakowsky, and J. Skaritka, “Mechanical Design of the VISA Undulator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP93, pp. 2477-2479.
- H. P. Hsueh et al., “The Optimization of Transverse Stripline Kicker”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA059, pp. 214-216.
- K. Zagar et al., “Predictive Diagnostics for High-availability Accelerators”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA087, pp. 873-875.
- M. Kadunc et al., “Deployment of Abeans Release 3 for the TINE Control System at DESY”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP506, pp. XX-XX.
Back to search