Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] X. L. Zhang, K. Bishofberger, V. Shiltsev, and F. Zimmermann, “The Special Applications of Tevatron Electron Lens in Collider Operation”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB076, pp. 1778-1780.
[n] J. R. Rees, “The PEP Storage Ring-Current Status”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 1989-1994.
[n] J. Y. Zou et al., “Calibration of Beam Position Monitors in the Injector of HLS II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME043, pp. 568-570.
[n] W. C. Sellyey, J. D. Gilpatrick, and R. Senior, “Bench Test of a Residual Gas Ionization Profile Monitor (RGIPM)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH043, pp. 1318-1320.
[n] R. Benaroya, T. K. Khoe, and W. J. Ramler, “Superconducting Plates as Magnetic Shields”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper B-010, pp. XX-XX.
[n] J. M. Potter, “A Real-Time Sampling Beam Position Monitor”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper C-7, pp. 175-189.
[n] D. J. Clark and C. M. Lyneis, “Operation of the LBL ECR Source Injection System”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-09, pp. 499-502.
[n] P. Gladkikh et al., “Lattice Design for the Compact X-Ray Source based on Compton Scattering”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B11, pp. 696-698.
[n] P. McIntosh et al., “An Over-Damped Cavity Longitudinal Kicker for the PEP-II LER”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB060, pp. 3141-3143.
[n] O. B. Dzagurov and V. P. Petukhov, “The Flat Corona Triode and Intermediate Shields in Electrostatic Generators”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP26C, pp. 688-689.
[n] K. A. Brown et al., “Python and MATLAB Interfaces to RHIC Controls Data”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 765-769. doi:10.18429/JACoW-ICALEPCS2017-TUPHA153
[n] S. Heo, T. Hashimoto, J. H. Lee, Y. H. Park, K. Yoo, and C. Lim, “Beam Study of RFQ Cooler Buncher for EBIS Charge Breeder at RAON”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper WE2WH03, unpublished.
[n] M. Chung et al., “Instrumentation for Characterizing 201-MHz MICE Cavity at Fermilab”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3930-3932. doi:10.18429/JACoW-IPAC2014-THPRI071
[n] L. Bobb and G. Rehm, “Performance of a Reflective Microscope Objective in an X-ray Pinhole Camera”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 477-481. doi:10.18429/JACoW-IBIC2018-WEPB18
[n] T. M. Huang et al., “The development of a high power input coupler for China ADS injector I RFQ”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO041, pp. 3857-3859.
[n] M. Arnold, T. Kuerzeder, J. Pforr, N. Pietralla, M. Steinhorst, and F. Hug, “Construction of a Third Recirculation for the S-DALINAC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 168-170. doi:10.18429/JACoW-LINAC2016-MOPLR014
[n] P. McIntosh, A. Hill, and H. Schwarz, “An Automated 476 MHz RF Cavity Processing Facility at SLAC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB035, pp. 1273-1275.
[n] U. Bechstedt et al., “The Performance of COSY”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP11F, pp. 541-543.
[n] A. J. Jason, E. F. Higgins, and A. R. Koelle, “The Los Alamos Proton Storage Ring (PSR) Injection Deflector System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2941-2944.
[n] W. Kang and Y. Hao, “A New Slotted-Pipe Kicker Magnet for BEPCII Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT005, pp. 955-957.
[n] S. Wilde et al., “Development of Thin Films for Superconducting RF Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2406-2408. doi:10.18429/JACoW-IPAC2014-WEPME058
[n] A. Navitski, S. Lagotzky, G. Mueller, D. Reschke, and X. Singer, “Surface Roughness and Correlated Enhanced Field Emission Investigations of Electropolished Niobium Samples”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO045, pp. 316-320.
[n] S. Cheban, D. Passarelli, and V. Roger, “Design and Manufacturing Challenges of the SSR1 Current Leads for PIP-II”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 329-331. doi:10.18429/JACoW-SRF2019-MOP101
[n] S. Jacobsen, G. Molinari, and H. Mulder, “A Feedback System to Control the Flux during Ultra Slow Extraction at LEAR”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP014L, pp. 1845-1847.
[n] C. Kerns, J. Crisp, Q. Kerns, and H. Miller, “New Low-Level RF System for the Fermilab Booster Synchrotron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 619-622.
[n] B. G. Chidley, J. C. Brown, S. B. Hodge, J. H. Ormrod, and J. Ungrin, “The Chalk River High Current Test Facility”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper I02, pp. 218-225.
[n] H. Joehri et al., “Development of the new UE38 Undulator for the Athos Beamline in SwissFEL”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. XX-XX. doi:10.18429/JACoW-MEDSI2018-TUOPMA03
[n] H. Gaus, B. Nguyen, B. Comiskey, E. Loftin, and J. Bradley III, “Review of known extraction kickers”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3587-3590. doi:10.18429/JACoW-IPAC2024-THPR39
[n] R. Toelle et al., “COSY-SCL, the Superconducting Injector Linac for COSY”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPA009, pp. 598-600.
[n] J. DeLong, J. M. Brennan, T. Hayes, N. Le, and K. S. Smith, “A Bunch to Bucket Phase Detector Using Digital Receiver Technology”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB025, pp. 3341-3343.
[n] J. M. Han et al., “Design and Fabrication of the KOMAC RFQ”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA61, pp. 3525-3527.
[n] K. D. Jacobs et al., “Instability Calculations for the MIT-Bates South Hall Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1791-1794.
[n] A. Khaleghi, K. Mahmoudi, M. Oghbaie, M. Akbari, and J. Rahighi, “Conceptual Design of Developing a Mobile App for Distributed Information Services for Control Systems (DISCS)”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 315-317. doi:10.18429/JACoW-ICALEPCS2017-TUMPL06
[n] L. Shen et al., “Pre-chirp Control Broadband Non-collinear Optical Parametric Amplifier for the Future Laser Weak-field Accelerator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA038, pp. 1223-1225.
[n] A. R. D. Rodrigues et al., “Sirius Light Source Status Report”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2886-2889. doi:10.18429/JACoW-IPAC2018-THXGBD4
[n] M. Schalwat, K. Escherich, N. Krupka, A. Matheisen, B. Petersen, and N. Steinhau-Kuehl, “Update of the DESY Infrastructure for Cavity Preparation”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO018, pp. 401-404.
[n] W. Schappert, J. P. Holzbauer, and Y. M. Pischalnikov, “Progress at FNAL in the Field of the Active Resonance Control for Narrow Bandwidth SRF Cavities.”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3355-3357. doi:10.18429/JACoW-IPAC2015-WEPTY036
[n] J. Dwivedi et al., “Restoration of RF Cavity for Synchrotron Storage Ring INDUS-1”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16003B, pp. XX-XX.
[n] G. Papotti, A. A. Gorzawski, M. Hostettler, and R. Schmidt, “Beam Losses Through the LHC Operational Cycle in 2012”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI028, pp. 1400-1402.
[n] J. Bradley III, T. Hardek, M. T. Lynch, D. E. Rees, W. Roybal, and P. J. Tallerico, “Spallation Neutron Source High-Power RF Transmitter Design for High Availability, Ease of Installation and Cost Containment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG015, pp. 1458-1460.
[n] J. Buon, “Final Focus Test Beam for the Next Linear Collider”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 125-128.
[n] A. V. Tollestrup et al., “Measurements of the Longitudinal and Transverse Beam Loss at the Tevatron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB040, pp. 2497-2499.
[n] C. G. Beetham, R. J. Lauckner, and C. Saltmarsh, “Overview of the SPS/LEP Fast Broadcast Message Timing System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 766-769.
[n] T.-S. F. Wang, “Robinson Instability and Logitudinal Mode Coupling”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1160-1163.
[n] J. D. Jarvis et al., “Adsorbate Modification of Emission from Diamond Field Emitters and Carbon Nanotubes”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC59, pp. 372-375.
[n] C. S. Chien, “Orbits and Nonlinear Effects in Terms of the Field Coefficients in the Median Plane”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 192-194.
[n] Y. Li, J. Pflueger, E. Gluskin, and N. Vinokurov, “Fine Tuning of the K-parameter of Two Segments of the European XFEL Undulator Systems”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPC28, pp. 144-147.
[n] N. Mueller et al., “Funneling with a Two Beam RFQ-Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP063, pp. 4917-4919.
[n] K. A. Brown, I. H. Chiang, A. Pendzick, and T. Tallerico, “Observations of Secondary Emission Chamber Degradation from Very High Intensity Proton Beams at the AGS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P047, pp. 2213-2214.
[n] P. J. Bryant, P. Galbraith, J. P. Gourber, G. Guignard, and K. Takikawa, “Measurement of the Excitation of the Coupling Resonance Qh -Qv = O”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1440-1443.
[n] C. Kim et al., “Laser System of Photocathode RF Gun in Pohang Accelerator Laboratory”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper WG403, pp. XX-XX.
[n] B. Dwersteg et al., “Beam Test of a 9-Cell Superconducting Cavity in the PETRA Storage Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3596-3599.
[n] X. L. Zhang et al., “Upgrades of the Tevatron Electron Lens”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB077, pp. 1781-1783.
[n] B. Brajuskovic, P. Den Hartog, and E. Trakhtenberg, “Mechanical Analysis of the Prototype Undulator for the Linac Coherent Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG001, pp. 1017-1019.
[n] CA. King and R. Neswold, “Upgrading the Fermilab Fire and Security Reporting System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUCAUST01, pp. 563-566.
[n] R. Stassen et al., “Recent Results of the HESR RF System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2094-2096. doi:10.18429/JACoW-IPAC2014-WEPRO064
[n] W. J. Ramler, “External Beam Focusing System - Argonne 60-Inch Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59F04, pp. 266-269.
[n] V. N. Barkovsky, Ju. G. Basargin, R. N. Litunovsky, O. A. Minjaev, A. V. Popov, and A. V. Stepanov, “Ion Optical Studies of Extraction Transport and Analysis Systems for 240-cm Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper F-005, pp. XX-XX.
[n] C. Feng et al., “Measurement of the Local Energy Spread of Electron Beam at SDUV-FEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEOBB01, pp. 2143-2145.
[n] J. D. Sedillo, J. D. Gilpatrick, J. D. Nguyen, and M. E. Gruchalla, “LANSCE 1L Harp Data Acquisition System Upgrade”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD11, pp. 438-441.
[n] P. Fatnani et al., “Status of Indus-2 Control System”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper TCO202, pp. 138-140.
[n] N. I. Azorsky et al., “Experimental Study of 100 MW Wide-aperture X-band Klystron with RF Absorbing Drift Tubes”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP045L, pp. 2143-2145.
[n] M. Korostelev, A. F. Grant, J. Lucas, O. B. Malyshev, and A. Wolski, “Beam Coupling Impedance in the ILC Damping Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP056, pp. 670-672.
[n] V. V. Smaluk et al., “Beam Diagnostics for the NSLS-II Booster”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD01, pp. 29-31.
[n] D. Taggart, H. H. Fleischmann, H. Hopman, and M. R. Parker, “Successful Betatron Acceleration of Kiloampere Electron Rings in RECE-Christa”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3165-3168.
[n] D. Schrage et al., “CW RFQ Fabrication and Engineering”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper WE1003, pp. 679-683.
[n] V. Blinov et al., “Linux-Based Toolkit on the VEPP-4 Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP028, pp. XX-XX.
[n] R. Gerig and H. Pfeffer, “Fermilab Power Monitor”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2901-2904.
[n] J. W. Gray and W. A. Morris, “Upgrade of the ISIS Main Magnet Power Supply”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A04, pp. 2202-2204.
[n] D. J. Adams et al., “Operational Experience and Future Plans at ISIS”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 333-337. doi:10.18429/JACoW-HB2016-TUPM3Y01
[n] Y. Futami et al., “Spot Scanning System with RI Beam at HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A17, pp. 2548-2550.
[n] A. Lumpkin, B. Yang, W. Gai, and W. Cieslik, “Initial Tests of the Dual-Sweep Streak Camera System Planned for APS Particle-Beam Diagnostics”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ11, pp. 2476-2478.
[n] B. W. Wei, “Present Status of HIRFL”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABI-03, pp. 23-32.
[n] D. Jeon et al., “Overview of the RISP Superconducting Linac”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper THA02, pp. 197-197.
[n] D. B. Belohrad, L. K. Jensen, O. R. Jones, M. Ludwig, and J.-J. Savioz, “The LHC Fast BCT System: A Comparison of Design Parameters with Initial Performance”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM051, pp. 269-273.
[n] M. T. Lynch, “The RF System for the Accelerator Production of Tritium (APT) Low Energy Demonstration Accelerator (LEDA) at Los Alamos”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP20, pp. 692-694.
[n] T. Kuerzeder, M. Arnold, L. E. Juergensen, J. Pforr, N. Pietralla, and F. Hug, “Beam Break-up Measurements at the Recirculating Electron Accelerator S-DALINAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1714-1716. doi:10.18429/JACoW-IPAC2016-TUPOR025
[n] H. Saugnac et al., “CRYHOLAB, A New Horizontal Test Cryostat for SCRF Cavities”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP025, pp. 478-480.
[n] Z.-F. He, D. M. Li, Y. H. Liu, S. L. Wang, J.-L. Zhang, and Y.-T. Zhang, “CW-type HV Power Supply of 50 Hz and its Application in Accelerator Power Supply”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA018, pp. 699-701.
[n] Y. Futami et al., “Medical Application of the Positron Emitter Beam at HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A01, pp. 2554-2556.
[n] F. V. Hartemann, D. J. Gibson, and A. L. Troha, “Coherent Synchrotron Radiation in an X-Band Photoinjector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH079, pp. 2638-2640.
[n] J. A. MacLachlan, “Particle Tracking in E-Phi Space as a Design Tool for Cyclic Accelerators”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1087-1090.
[n] S. K. Barber et al., “Quasi Nonlinear Plasma Wakefield Acceleration Experiments”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP110, pp. 680-682.
[n] P. Gruber and Y. Torun, “Beam Photography: A Technique for Imaging Dark Currents”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB091, pp. 1413-1415.
[n] C. Moore and H. Jostlein, “A Laser Alignment System for Low Beta Quadrupoles”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 631-634.
[n] A. V. Apelfeld et al., “Application of the Particle Backscattering Method for the Certification of the Oxide Protective Coatings at the Surface of Al Alloys”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP51C, pp. 2422-2424.
[n] U. Bechstedt et al., “Conditioning the Cooler Synchrotron COSY for Internal Experiments”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP075G, pp. 572-574.
[n] S. G. Azevedo et al., “Automated Experimental Data Analysis at the National Ignition Facility”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP011, pp. 429-431.
[n] H. Yamada et al., “Applications and Physics of the Tabletop Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRAL6, pp. 592-594.
[n] W. L. Bendel and T. F. Godlove, “Uniform - Field Wedge Magnets: Results”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 385-387.
[n] Z. S. Zhou et al., “CEPC 650 MHz Klystron Development”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3891-3894. doi:10.18429/JACoW-IPAC2016-THPOR046
[n] D. Trbojevic, D. Finley, R. Gerig, and S. Holmes, “Design Method for High Energy Accelerator Without Transition Energy”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1536-1539.
[n] N. Sitaraman et al., “Ab Initio Calculations on the Growth and Superconducting Properties of Nb?Sn”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 39-43. doi:10.18429/JACoW-SRF2019-MOP010
[n] Z. K. Liang, W. Chen, X. Liu, J. Zha, K. F. Liu, and B. Qin, “Design of the Energy Selection System for Proton Therapy Based on GEANT4”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 30-32. doi:10.18429/JACoW-Cyclotrons2016-MOD01
[n] H. Nakayama et al., “A Measurement System Using GP-IB for a Magnetic Core Test Cavity”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D007, pp. 393-395.
[n] H. A. Day, M. J. Barnes, and L. M. C. Feliciano, “Impedance Studies of the LHC Injection Kicker Magnets for HL-LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 370-373. doi:10.18429/JACoW-IPAC2015-MOPJE038
[n] E. Shaposhnikova, P. Baudrenghien, T. Bohl, T. Linnecar, and J. Tuckmantel, “Nominal Longitudinal Parameters for the LHC Beam in the CERN SPS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB015, pp. 3050-3052.
[n] I. Itahashi, M. Aoki, Y. Arimoto, Y. Kuno, A. Sato, and M. Y. Yoshida, “Extinction Monitor by Using a Dissociation of Hydrogen Molecule to Atoms with High Energy Proton Beam”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP072, pp. 3527-3529.
[n] Y.-J. Chen, D. T. Blackfield, G. J. Caporaso, S. D. Nelson, and B. R. Poole, “Beam Transport in a Compact Dielectric Wall Accelerator for Proton Therapy”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP032, pp. 1552-1554.
[n] S. Kashiwagi et al., “Development of high-power 4K Nb3Sn superconducting RF electron linac for medical radioisotope production”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 797-800. doi:10.18429/JACoW-LINAC2024-THPB085
[n] J. L. Biarrotte, “A Statistical Analysis of the Danger Induced by HOM Excitation in a Superconducting Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH137, pp. 1098-1100.
[n] G. X. Xia and A. Caldwell, “Producing Short Proton Bunch for Driving Plasma Wakefield Acceleration”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD051, pp. 4395-4397.
[n] G. N. Kim et al., “Status of Pohang Neutron Facility Based on 100-MeV Electron Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU432, pp. 383-385.
[n] I. Terechkine et al., “Tuner of a Second Harmonic Cavity of the Fermilab Booster”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4362-4365. doi:10.18429/JACoW-IPAC2017-THPIK113
[n] J. Wieland, A. Romanov, A. Valishev, G. Stancari, and N. Kuklev, “Measured dynamic aperture and detuning of nonlinear integrable optics”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3019-3022. doi:10.18429/JACoW-IPAC2024-THPC21
[n] S. D. Nelson, G. J. Caporaso, and B. R. Poole, “Electromagnetic Simulations of Linear Proton Accelerator Structures Using Dielectric Wall Accelerators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS058, pp. 1784-1786.
[n] M. P. Ehrlichman et al., “Measurement of Beam Size in Intrabeam Scattering Dominated Beams at Various Energies at CesrTA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1635-1637. doi:10.18429/JACoW-IPAC2014-TUPRI035
[n] Z. Yin, Y. Wu, and J. F. Zhang, “Design and Experiment of the BEPCII IR Conventional Dual Aperture Quadrupole”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper MPPT002, unpublished.
[n] H. Ghasem and E. Ahmadi, “Super Bright Lattice for the Iranian Light Source Facility Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 255-257. doi:10.18429/JACoW-IPAC2014-MOPRO074
[n] R. Koontz, T. McKinney, R. Miller, and A. Wilmunder, “SLAC Collider Injector, RF Drive Synchronization and Trigger Electronics and 15 Amp Thermionic Gun Development”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2213-2216.
[n] R. D. Kohaupt, “The Experimental Study of a Higher Harmonic rf System in PETRA”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2525-2528.
[n] J. Steimel et al., “Development and Operation of PIP-II Injector Test, SSR1 Cryomodule, 325 MHz Amplifiers”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 245. doi:10.18429/JACoW-SRF2021-MOPTEV017
[n] J. M. Maus, R. A. Jameson, and A. Schempp, “PteqHI Development and Code Comparing”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC031, pp. 322-325.
[n] D. L. Hall et al., “Surface Analysis of Features Seen on Nb3Sn Sample Coupons Grown by Vapour Diffusion”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1130-1133. doi:10.18429/JACoW-IPAC2017-MOPVA119
[n] T. Ota et al., “Measurement of an L-Band Three-Cell Superconducting Cavity Fabricated in TOSHIBA”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D004, pp. 80-82.
[n] J. A. Hulbert et al., “Invited Paper: First Year's Operation of the Chalk River Superconducting Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper A-01, pp. XX-XX.
[n] M. Mouat, E. Klassen, K. S. Lee, J. Pon, and P. Yogendran, “Disk Storage Upgrade in TRIUMF's Central Control System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO020, pp. 2037-2039.
[n] G. Chiozzi, L. Andolfato, R. Karban, and A. Tejeda, “A UML Profile for Code Generation of Component Based Distributed Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS032, pp. 867-870.
[n] T. K. Khoe and R. L. Kustom, “ASPUN, Design for an Argonne Super Intense Pulsed Neutron Source”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2086-2089.
[n] G. Hemmie and J. R. Maidment, “DESY III, The New Proton Injector for HERA”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 172-175.
For LaTeX
Use Complete Form
For BibTeX
References
- X. L. Zhang, K. Bishofberger, V. Shiltsev, and F. Zimmermann, “The Special Applications of Tevatron Electron Lens in Collider Operation”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB076, pp. 1778-1780.
- J. R. Rees, “The PEP Storage Ring-Current Status”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 1989-1994.
- J. Y. Zou et al., “Calibration of Beam Position Monitors in the Injector of HLS II”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME043, pp. 568-570.
- W. C. Sellyey, J. D. Gilpatrick, and R. Senior, “Bench Test of a Residual Gas Ionization Profile Monitor (RGIPM)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH043, pp. 1318-1320.
- R. Benaroya, T. K. Khoe, and W. J. Ramler, “Superconducting Plates as Magnetic Shields”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper B-010, pp. XX-XX.
- J. M. Potter, “A Real-Time Sampling Beam Position Monitor”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper C-7, pp. 175-189.
- D. J. Clark and C. M. Lyneis, “Operation of the LBL ECR Source Injection System”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I6-09, pp. 499-502.
- P. Gladkikh et al., “Lattice Design for the Compact X-Ray Source based on Compton Scattering”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2B11, pp. 696-698.
- P. McIntosh et al., “An Over-Damped Cavity Longitudinal Kicker for the PEP-II LER”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB060, pp. 3141-3143.
- O. B. Dzagurov and V. P. Petukhov, “The Flat Corona Triode and Intermediate Shields in Electrostatic Generators”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP26C, pp. 688-689.
- K. A. Brown et al., “Python and MATLAB Interfaces to RHIC Controls Data”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 765-769.
- S. Heo, T. Hashimoto, J. H. Lee, Y. H. Park, K. Yoo, and C. Lim, “Beam Study of RFQ Cooler Buncher for EBIS Charge Breeder at RAON”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper WE2WH03, unpublished.
- M. Chung et al., “Instrumentation for Characterizing 201-MHz MICE Cavity at Fermilab”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3930-3932.
- L. Bobb and G. Rehm, “Performance of a Reflective Microscope Objective in an X-ray Pinhole Camera”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 477-481.
- T. M. Huang et al., “The development of a high power input coupler for China ADS injector I RFQ”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO041, pp. 3857-3859.
- M. Arnold, T. Kuerzeder, J. Pforr, N. Pietralla, M. Steinhorst, and F. Hug, “Construction of a Third Recirculation for the S-DALINAC”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 168-170.
- P. McIntosh, A. Hill, and H. Schwarz, “An Automated 476 MHz RF Cavity Processing Facility at SLAC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB035, pp. 1273-1275.
- U. Bechstedt et al., “The Performance of COSY”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP11F, pp. 541-543.
- A. J. Jason, E. F. Higgins, and A. R. Koelle, “The Los Alamos Proton Storage Ring (PSR) Injection Deflector System”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2941-2944.
- W. Kang and Y. Hao, “A New Slotted-Pipe Kicker Magnet for BEPCII Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT005, pp. 955-957.
- S. Wilde et al., “Development of Thin Films for Superconducting RF Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2406-2408.
- A. Navitski, S. Lagotzky, G. Mueller, D. Reschke, and X. Singer, “Surface Roughness and Correlated Enhanced Field Emission Investigations of Electropolished Niobium Samples”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO045, pp. 316-320.
- S. Cheban, D. Passarelli, and V. Roger, “Design and Manufacturing Challenges of the SSR1 Current Leads for PIP-II”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 329-331.
- S. Jacobsen, G. Molinari, and H. Mulder, “A Feedback System to Control the Flux during Ultra Slow Extraction at LEAR”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP014L, pp. 1845-1847.
- C. Kerns, J. Crisp, Q. Kerns, and H. Miller, “New Low-Level RF System for the Fermilab Booster Synchrotron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 619-622.
- B. G. Chidley, J. C. Brown, S. B. Hodge, J. H. Ormrod, and J. Ungrin, “The Chalk River High Current Test Facility”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper I02, pp. 218-225.
- H. Joehri et al., “Development of the new UE38 Undulator for the Athos Beamline in SwissFEL”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. XX-XX.
- H. Gaus, B. Nguyen, B. Comiskey, E. Loftin, and J. Bradley III, “Review of known extraction kickers”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR39, pp. 3587-3590.
- R. Toelle et al., “COSY-SCL, the Superconducting Injector Linac for COSY”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPA009, pp. 598-600.
- J. DeLong, J. M. Brennan, T. Hayes, N. Le, and K. S. Smith, “A Bunch to Bucket Phase Detector Using Digital Receiver Technology”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB025, pp. 3341-3343.
- J. M. Han et al., “Design and Fabrication of the KOMAC RFQ”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA61, pp. 3525-3527.
- K. D. Jacobs et al., “Instability Calculations for the MIT-Bates South Hall Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1791-1794.
- A. Khaleghi, K. Mahmoudi, M. Oghbaie, M. Akbari, and J. Rahighi, “Conceptual Design of Developing a Mobile App for Distributed Information Services for Control Systems (DISCS)”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 315-317.
- L. Shen et al., “Pre-chirp Control Broadband Non-collinear Optical Parametric Amplifier for the Future Laser Weak-field Accelerator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA038, pp. 1223-1225.
- A. R. D. Rodrigues et al., “Sirius Light Source Status Report”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2886-2889.
- M. Schalwat, K. Escherich, N. Krupka, A. Matheisen, B. Petersen, and N. Steinhau-Kuehl, “Update of the DESY Infrastructure for Cavity Preparation”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO018, pp. 401-404.
- W. Schappert, J. P. Holzbauer, and Y. M. Pischalnikov, “Progress at FNAL in the Field of the Active Resonance Control for Narrow Bandwidth SRF Cavities.”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3355-3357.
- J. Dwivedi et al., “Restoration of RF Cavity for Synchrotron Storage Ring INDUS-1”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16003B, pp. XX-XX.
- G. Papotti, A. A. Gorzawski, M. Hostettler, and R. Schmidt, “Beam Losses Through the LHC Operational Cycle in 2012”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI028, pp. 1400-1402.
- J. Bradley III, T. Hardek, M. T. Lynch, D. E. Rees, W. Roybal, and P. J. Tallerico, “Spallation Neutron Source High-Power RF Transmitter Design for High Availability, Ease of Installation and Cost Containment”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG015, pp. 1458-1460.
- J. Buon, “Final Focus Test Beam for the Next Linear Collider”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 125-128.
- A. V. Tollestrup et al., “Measurements of the Longitudinal and Transverse Beam Loss at the Tevatron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB040, pp. 2497-2499.
- C. G. Beetham, R. J. Lauckner, and C. Saltmarsh, “Overview of the SPS/LEP Fast Broadcast Message Timing System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 766-769.
- T.-S. F. Wang, “Robinson Instability and Logitudinal Mode Coupling”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1160-1163.
- J. D. Jarvis et al., “Adsorbate Modification of Emission from Diamond Field Emitters and Carbon Nanotubes”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC59, pp. 372-375.
- C. S. Chien, “Orbits and Nonlinear Effects in Terms of the Field Coefficients in the Median Plane”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 192-194.
- Y. Li, J. Pflueger, E. Gluskin, and N. Vinokurov, “Fine Tuning of the K-parameter of Two Segments of the European XFEL Undulator Systems”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOPC28, pp. 144-147.
- N. Mueller et al., “Funneling with a Two Beam RFQ-Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP063, pp. 4917-4919.
- K. A. Brown, I. H. Chiang, A. Pendzick, and T. Tallerico, “Observations of Secondary Emission Chamber Degradation from Very High Intensity Proton Beams at the AGS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P047, pp. 2213-2214.
- P. J. Bryant, P. Galbraith, J. P. Gourber, G. Guignard, and K. Takikawa, “Measurement of the Excitation of the Coupling Resonance Qh -Qv = O”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1440-1443.
- C. Kim et al., “Laser System of Photocathode RF Gun in Pohang Accelerator Laboratory”, in Proc. 37th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'06), Hamburg, Germany, May 2006, paper WG403, pp. XX-XX.
- B. Dwersteg et al., “Beam Test of a 9-Cell Superconducting Cavity in the PETRA Storage Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3596-3599.
- X. L. Zhang et al., “Upgrades of the Tevatron Electron Lens”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB077, pp. 1781-1783.
- B. Brajuskovic, P. Den Hartog, and E. Trakhtenberg, “Mechanical Analysis of the Prototype Undulator for the Linac Coherent Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG001, pp. 1017-1019.
- CA. King and R. Neswold, “Upgrading the Fermilab Fire and Security Reporting System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUCAUST01, pp. 563-566.
- R. Stassen et al., “Recent Results of the HESR RF System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2094-2096.
- W. J. Ramler, “External Beam Focusing System - Argonne 60-Inch Cyclotron”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59F04, pp. 266-269.
- V. N. Barkovsky, Ju. G. Basargin, R. N. Litunovsky, O. A. Minjaev, A. V. Popov, and A. V. Stepanov, “Ion Optical Studies of Extraction Transport and Analysis Systems for 240-cm Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper F-005, pp. XX-XX.
- C. Feng et al., “Measurement of the Local Energy Spread of Electron Beam at SDUV-FEL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEOBB01, pp. 2143-2145.
- J. D. Sedillo, J. D. Gilpatrick, J. D. Nguyen, and M. E. Gruchalla, “LANSCE 1L Harp Data Acquisition System Upgrade”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPD11, pp. 438-441.
- P. Fatnani et al., “Status of Indus-2 Control System”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper TCO202, pp. 138-140.
- N. I. Azorsky et al., “Experimental Study of 100 MW Wide-aperture X-band Klystron with RF Absorbing Drift Tubes”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP045L, pp. 2143-2145.
- M. Korostelev, A. F. Grant, J. Lucas, O. B. Malyshev, and A. Wolski, “Beam Coupling Impedance in the ILC Damping Rings”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP056, pp. 670-672.
- V. V. Smaluk et al., “Beam Diagnostics for the NSLS-II Booster”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD01, pp. 29-31.
- D. Taggart, H. H. Fleischmann, H. Hopman, and M. R. Parker, “Successful Betatron Acceleration of Kiloampere Electron Rings in RECE-Christa”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3165-3168.
- D. Schrage et al., “CW RFQ Fabrication and Engineering”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper WE1003, pp. 679-683.
- V. Blinov et al., “Linux-Based Toolkit on the VEPP-4 Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP028, pp. XX-XX.
- R. Gerig and H. Pfeffer, “Fermilab Power Monitor”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2901-2904.
- J. W. Gray and W. A. Morris, “Upgrade of the ISIS Main Magnet Power Supply”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4A04, pp. 2202-2204.
- D. J. Adams et al., “Operational Experience and Future Plans at ISIS”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 333-337.
- Y. Futami et al., “Spot Scanning System with RI Beam at HIMAC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A17, pp. 2548-2550.
- A. Lumpkin, B. Yang, W. Gai, and W. Cieslik, “Initial Tests of the Dual-Sweep Streak Camera System Planned for APS Particle-Beam Diagnostics”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ11, pp. 2476-2478.
- B. W. Wei, “Present Status of HIRFL”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABI-03, pp. 23-32.
- D. Jeon et al., “Overview of the RISP Superconducting Linac”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper THA02, pp. 197-197.
- D. B. Belohrad, L. K. Jensen, O. R. Jones, M. Ludwig, and J.-J. Savioz, “The LHC Fast BCT System: A Comparison of Design Parameters with Initial Performance”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM051, pp. 269-273.
- M. T. Lynch, “The RF System for the Accelerator Production of Tritium (APT) Low Energy Demonstration Accelerator (LEDA) at Los Alamos”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP20, pp. 692-694.
- T. Kuerzeder, M. Arnold, L. E. Juergensen, J. Pforr, N. Pietralla, and F. Hug, “Beam Break-up Measurements at the Recirculating Electron Accelerator S-DALINAC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1714-1716.
- H. Saugnac et al., “CRYHOLAB, A New Horizontal Test Cryostat for SCRF Cavities”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP025, pp. 478-480.
- Z.-F. He, D. M. Li, Y. H. Liu, S. L. Wang, J.-L. Zhang, and Y.-T. Zhang, “CW-type HV Power Supply of 50 Hz and its Application in Accelerator Power Supply”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA018, pp. 699-701.
- Y. Futami et al., “Medical Application of the Positron Emitter Beam at HIMAC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A01, pp. 2554-2556.
- F. V. Hartemann, D. J. Gibson, and A. L. Troha, “Coherent Synchrotron Radiation in an X-Band Photoinjector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH079, pp. 2638-2640.
- J. A. MacLachlan, “Particle Tracking in E-Phi Space as a Design Tool for Cyclic Accelerators”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1087-1090.
- S. K. Barber et al., “Quasi Nonlinear Plasma Wakefield Acceleration Experiments”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP110, pp. 680-682.
- P. Gruber and Y. Torun, “Beam Photography: A Technique for Imaging Dark Currents”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB091, pp. 1413-1415.
- C. Moore and H. Jostlein, “A Laser Alignment System for Low Beta Quadrupoles”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 631-634.
- A. V. Apelfeld et al., “Application of the Particle Backscattering Method for the Certification of the Oxide Protective Coatings at the Surface of Al Alloys”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP51C, pp. 2422-2424.
- U. Bechstedt et al., “Conditioning the Cooler Synchrotron COSY for Internal Experiments”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP075G, pp. 572-574.
- S. G. Azevedo et al., “Automated Experimental Data Analysis at the National Ignition Facility”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP011, pp. 429-431.
- H. Yamada et al., “Applications and Physics of the Tabletop Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRAL6, pp. 592-594.
- W. L. Bendel and T. F. Godlove, “Uniform - Field Wedge Magnets: Results”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 385-387.
- Z. S. Zhou et al., “CEPC 650 MHz Klystron Development”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3891-3894.
- D. Trbojevic, D. Finley, R. Gerig, and S. Holmes, “Design Method for High Energy Accelerator Without Transition Energy”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1536-1539.
- N. Sitaraman et al., “Ab Initio Calculations on the Growth and Superconducting Properties of Nb?Sn”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 39-43.
- Z. K. Liang, W. Chen, X. Liu, J. Zha, K. F. Liu, and B. Qin, “Design of the Energy Selection System for Proton Therapy Based on GEANT4”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 30-32.
- H. Nakayama et al., “A Measurement System Using GP-IB for a Magnetic Core Test Cavity”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D007, pp. 393-395.
- H. A. Day, M. J. Barnes, and L. M. C. Feliciano, “Impedance Studies of the LHC Injection Kicker Magnets for HL-LHC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 370-373.
- E. Shaposhnikova, P. Baudrenghien, T. Bohl, T. Linnecar, and J. Tuckmantel, “Nominal Longitudinal Parameters for the LHC Beam in the CERN SPS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB015, pp. 3050-3052.
- I. Itahashi, M. Aoki, Y. Arimoto, Y. Kuno, A. Sato, and M. Y. Yoshida, “Extinction Monitor by Using a Dissociation of Hydrogen Molecule to Atoms with High Energy Proton Beam”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP072, pp. 3527-3529.
- Y.-J. Chen, D. T. Blackfield, G. J. Caporaso, S. D. Nelson, and B. R. Poole, “Beam Transport in a Compact Dielectric Wall Accelerator for Proton Therapy”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP032, pp. 1552-1554.
- S. Kashiwagi et al., “Development of high-power 4K Nb3Sn superconducting RF electron linac for medical radioisotope production”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 797-800.
- J. L. Biarrotte, “A Statistical Analysis of the Danger Induced by HOM Excitation in a Superconducting Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH137, pp. 1098-1100.
- G. X. Xia and A. Caldwell, “Producing Short Proton Bunch for Driving Plasma Wakefield Acceleration”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD051, pp. 4395-4397.
- G. N. Kim et al., “Status of Pohang Neutron Facility Based on 100-MeV Electron Linac”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU432, pp. 383-385.
- I. Terechkine et al., “Tuner of a Second Harmonic Cavity of the Fermilab Booster”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4362-4365.
- J. Wieland, A. Romanov, A. Valishev, G. Stancari, and N. Kuklev, “Measured dynamic aperture and detuning of nonlinear integrable optics”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC21, pp. 3019-3022.
- S. D. Nelson, G. J. Caporaso, and B. R. Poole, “Electromagnetic Simulations of Linear Proton Accelerator Structures Using Dielectric Wall Accelerators”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS058, pp. 1784-1786.
- M. P. Ehrlichman et al., “Measurement of Beam Size in Intrabeam Scattering Dominated Beams at Various Energies at CesrTA”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1635-1637.
- Z. Yin, Y. Wu, and J. F. Zhang, “Design and Experiment of the BEPCII IR Conventional Dual Aperture Quadrupole”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT002, unpublished.
- H. Ghasem and E. Ahmadi, “Super Bright Lattice for the Iranian Light Source Facility Storage Ring”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 255-257.
- R. Koontz, T. McKinney, R. Miller, and A. Wilmunder, “SLAC Collider Injector, RF Drive Synchronization and Trigger Electronics and 15 Amp Thermionic Gun Development”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2213-2216.
- R. D. Kohaupt, “The Experimental Study of a Higher Harmonic rf System in PETRA”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2525-2528.
- J. Steimel et al., “Development and Operation of PIP-II Injector Test, SSR1 Cryomodule, 325 MHz Amplifiers”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 245.
- J. M. Maus, R. A. Jameson, and A. Schempp, “PteqHI Development and Code Comparing”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC031, pp. 322-325.
- D. L. Hall et al., “Surface Analysis of Features Seen on Nb3Sn Sample Coupons Grown by Vapour Diffusion”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1130-1133.
- T. Ota et al., “Measurement of an L-Band Three-Cell Superconducting Cavity Fabricated in TOSHIBA”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D004, pp. 80-82.
- J. A. Hulbert et al., “Invited Paper: First Year's Operation of the Chalk River Superconducting Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper A-01, pp. XX-XX.
- M. Mouat, E. Klassen, K. S. Lee, J. Pon, and P. Yogendran, “Disk Storage Upgrade in TRIUMF's Central Control System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO020, pp. 2037-2039.
- G. Chiozzi, L. Andolfato, R. Karban, and A. Tejeda, “A UML Profile for Code Generation of Component Based Distributed Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS032, pp. 867-870.
- T. K. Khoe and R. L. Kustom, “ASPUN, Design for an Argonne Super Intense Pulsed Neutron Source”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2086-2089.
- G. Hemmie and J. R. Maidment, “DESY III, The New Proton Injector for HERA”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 172-175.
Back to search