Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Burkhart et al., “ILC Marx Modulator Development Program Status”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THOARA03, pp. 3636-3638.
[n] G. M. A. Duller, D. R. Hall, and A. Stallwood, “F-Switch: Novel 'Random Access' Manipulator for Large Numbers of Compound Refractive Lenses”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 345-347. doi:10.18429/JACoW-MEDSI2016-WEPE22
[n] V. S. Morozov et al., “Full Acceptance Interaction Region Design of JLEIC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2787-2790. doi:10.18429/JACoW-IPAC2019-WEPGW123
[n] T. Mimashi et al., “Coherent Beam Oscillation in the Frequency Region from 0.1 Hz to 50 Hz at KEKB Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3B08, pp. 424-426.
[n] H. F. Ouyang et al., “A High-Duty Factor Radio-Frequency Quadrupole Accelerator for ADS Study in China”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE4PBC03, pp. 1955-1957.
[n] J. A. Stillerman, W. Burke, and B. Labombard, “Sub-sample Time-base Resolution in a Heterogeneous Distributed Data Acquisition Environment”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEB004, pp. 382-384.
[n] L. Thorndahl, D. Barker, C. Dimopoulou, and C. Peschke, “Design of the Palmer Pickup for Stochastic Pre-cooling of Heavy Ions at the CR”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO21, pp. 149-151.
[n] A. Sy et al., “Degrader beamline design at the CEBAF injector for machine acceptance studies”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1162-1165. doi:10.18429/JACoW-IPAC2023-MOPM081
[n] G. R. White, Y. Cai, R. O. Hettel, M. A. G. Johansson, V. Yakimenko, and G. Yocky, “A Compact 335 MeV Positron Damping Ring Design for FACET-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3652-3655. doi:10.18429/JACoW-IPAC2017-THOBA3
[n] G. Arduini, J. Klem, and G. Morpurgo, “Multiturn Measurements at the CERN SPS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A06, pp. 1756-1758.
[n] K. Euler et al., “Bonn Cyclotron Progress Report”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-13, pp. 92-94.
[n] J. C. Smith et al., “Comparison of Tracking Codes for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS013, pp. 3020-3022.
[n] R. N. Litunovsky and V. Nikolaev, “Central Region of 240 - cm Variable Energy Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper A-004, pp. XX-XX.
[n] L. Schrettner, B. Bag?â, B. Erdohelyi, T. M. Gaizer, A. Heidrich, and G. Nyiri, “Configuration Management for the Integrated Control System Software of ELI-ALPS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1162-1167. doi:10.18429/JACoW-ICALEPCS2017-THBPA06
[n] M. Bieler, I. V. Agapov, H. Ehrlichmann, J. Keil, G. K. Sahoo, and R. Wanzenberg, “PETRA III Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2589-2591. doi:10.18429/JACoW-IPAC2017-WEPAB014
[n] R. O. Hettel, “Challenges in the Design of Diffraction-limited Storage Rings”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 7-11. doi:10.18429/JACoW-IPAC2014-MOXBA01
[n] N. G. Reshetnyak et al., “Investigation on the Electron Beam Formation in the Magnetron Gun with a Secondary-Emission Cathode Using the Masgnetic System Based on Permanent Magnets”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC011, pp. 349-351.
[n] N. F. Verster, “Regenerative Beam Extraction from the 150-MeV Synchrocyclotron at the Laboratoire Curie”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59E02, pp. 224-229.
[n] M. S. Flegel, “Designing and Implementing LabVIEW Solutions for Re-Use”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCB06, pp. 960-963.
[n] B. R. Gamage et al., “Multipole Effects on Dynamic Aperture in JLEIC Ion Collider Ring”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 559-562. doi:10.18429/JACoW-NAPAC2019-TUPLO15
[n] H. H?Âltermann et al., “Light Ion Injector for NICA”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 834-836. doi:10.18429/JACoW-NAPAC2019-WEPLH15
[n] K. S. White, “Status and Future Developments in Large Accelerator Control Systems”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEA2IS01, pp. 239-244.
[n] E. D. Gazazyan, G. G. Oksuzyan, E. S. Pogossian, and A. D. Ter-Pogossyan, “Electron Beam Monitor based on Waveguide with Thin Impedance Films”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2A16, pp. 1318-1320.
[n] H. L. Hagedoorn and N. F. Verster, “The Extraction of the Beam of the Philips AVF Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63E09, pp. XX-XX.
[n] V. N. Barkovsky et al., “Experiments on Ion Acceleration at 685-mm Sector Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper G-002, pp. XX-XX.
[n] R. Bork, “The CEBAF Control System Architecture”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 523-526.
[n] H. W. Atherton et al., “Contamination of Nuclear Fragments in a 200 GEV per Nucleon Oxygen Ion Beam at CERN”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1752-1755.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Burkhart et al., “ILC Marx Modulator Development Program Status”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THOARA03, pp. 3636-3638.
- G. M. A. Duller, D. R. Hall, and A. Stallwood, “F-Switch: Novel 'Random Access' Manipulator for Large Numbers of Compound Refractive Lenses”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 345-347.
- V. S. Morozov et al., “Full Acceptance Interaction Region Design of JLEIC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2787-2790.
- T. Mimashi et al., “Coherent Beam Oscillation in the Frequency Region from 0.1 Hz to 50 Hz at KEKB Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3B08, pp. 424-426.
- H. F. Ouyang et al., “A High-Duty Factor Radio-Frequency Quadrupole Accelerator for ADS Study in China”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE4PBC03, pp. 1955-1957.
- J. A. Stillerman, W. Burke, and B. Labombard, “Sub-sample Time-base Resolution in a Heterogeneous Distributed Data Acquisition Environment”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEB004, pp. 382-384.
- L. Thorndahl, D. Barker, C. Dimopoulou, and C. Peschke, “Design of the Palmer Pickup for Stochastic Pre-cooling of Heavy Ions at the CR”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper WEPPO21, pp. 149-151.
- A. Sy et al., “Degrader beamline design at the CEBAF injector for machine acceptance studies”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM081, pp. 1162-1165.
- G. R. White, Y. Cai, R. O. Hettel, M. A. G. Johansson, V. Yakimenko, and G. Yocky, “A Compact 335 MeV Positron Damping Ring Design for FACET-II”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3652-3655.
- G. Arduini, J. Klem, and G. Morpurgo, “Multiturn Measurements at the CERN SPS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A06, pp. 1756-1758.
- K. Euler et al., “Bonn Cyclotron Progress Report”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-13, pp. 92-94.
- J. C. Smith et al., “Comparison of Tracking Codes for the International Linear Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS013, pp. 3020-3022.
- R. N. Litunovsky and V. Nikolaev, “Central Region of 240 - cm Variable Energy Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper A-004, pp. XX-XX.
- L. Schrettner, B. Bag?â, B. Erdohelyi, T. M. Gaizer, A. Heidrich, and G. Nyiri, “Configuration Management for the Integrated Control System Software of ELI-ALPS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1162-1167.
- M. Bieler, I. V. Agapov, H. Ehrlichmann, J. Keil, G. K. Sahoo, and R. Wanzenberg, “PETRA III Operation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2589-2591.
- R. O. Hettel, “Challenges in the Design of Diffraction-limited Storage Rings”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 7-11.
- N. G. Reshetnyak et al., “Investigation on the Electron Beam Formation in the Magnetron Gun with a Secondary-Emission Cathode Using the Masgnetic System Based on Permanent Magnets”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC011, pp. 349-351.
- N. F. Verster, “Regenerative Beam Extraction from the 150-MeV Synchrocyclotron at the Laboratoire Curie”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59E02, pp. 224-229.
- M. S. Flegel, “Designing and Implementing LabVIEW Solutions for Re-Use”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCB06, pp. 960-963.
- B. R. Gamage et al., “Multipole Effects on Dynamic Aperture in JLEIC Ion Collider Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 559-562.
- H. H?Âltermann et al., “Light Ion Injector for NICA”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 834-836.
- K. S. White, “Status and Future Developments in Large Accelerator Control Systems”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEA2IS01, pp. 239-244.
- E. D. Gazazyan, G. G. Oksuzyan, E. S. Pogossian, and A. D. Ter-Pogossyan, “Electron Beam Monitor based on Waveguide with Thin Impedance Films”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP2A16, pp. 1318-1320.
- H. L. Hagedoorn and N. F. Verster, “The Extraction of the Beam of the Philips AVF Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63E09, pp. XX-XX.
- V. N. Barkovsky et al., “Experiments on Ion Acceleration at 685-mm Sector Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper G-002, pp. XX-XX.
- R. Bork, “The CEBAF Control System Architecture”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 523-526.
- H. W. Atherton et al., “Contamination of Nuclear Fragments in a 200 GEV per Nucleon Oxygen Ion Beam at CERN”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1752-1755.
Back to search