Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. R. Farrell and W. J. Gallagher, “Further Notes on the Multipactor Effect”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2900-2903.
[n] S. Pissanetzky and W. Schmidt, “Design of the Dipole Magnet for the C" Version of the Superconducting Supercollider 20 TeV Twin-Beam Proton Accelerator (SSC)"”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3740-3743.
[n] D. J. MacNair, “Digitally Controlled High Availability Power Supply”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP021, pp. 437-439.
[n] J. Poate and M. I. Current, “Industrial Applications of Ion Implantation for Doping and Modification of Semiconductor Materials”, presented at the PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAA008, unpublished.
[n] C. Xu, S. A. Belomestnykh, I. Ben-Zvi, and W. Xu, “Second Harmonic Cavity Design for Synchrotron Radiation Energy Compensator in eRHIC Project”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB002, pp. 1052-1055.
[n] C. Carli and M. Chanel, “Transverse Electron Cooling - From the Time Evolution of the Profiles to Drift Velocities of the Oscillation Amplitudes”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B05, pp. 1235-1237.
[n] P. Emma, Z. Huang, and J. Wu, “Weak FEL Gain Detection with a Modulated Laser-Based Beam Heater”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT040, pp. 2636-2638.
[n] Ye. Fomin, “Machine Learning for the Storage Ring Optimization”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 169-171. doi:10.18429/JACoW-RuPAC2021-MOPSA23
[n] G. Rakowsky, “RF Accelerating Cavities for AGS Conversion”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 315-320.
[n] D. Berkaev, O. Belikov, V. Kozak, P. Shatunov, and A. Medvedko, “SYSTEM OF POWER SUPPLY RIPPLES MEASUREMENT FOR VEPP-2000 COLLIDER”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH12, pp. XX-XX.
[n] P. J. Bendt, B. H. Erkkila, and R. H. Stokes, “Design and Measured Characteristics of Minimum Loss Low-Velocity Helix Resonators”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 185-188.
[n] N. Terunuma, “KEK ATF Beam Instrumentation Program”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEODN2, pp. 1480-1484.
[n] G. Mishra, M. Gehlot, R. Khullar, and B. Chilukamarri, “Progress in development and measurement of an asymmetric magnet pole undulator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3801-3803. doi:10.18429/JACoW-IPAC2023-WEPM101
[n] F. R. Ullrich, “Temperature Stabilisation of the Accelerating Structure”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP55, pp. 791-793.
[n] S. K. Howry, M. Hu, D. Neet, R. Scholl, and E. J. Seppi, “The SLAC Beam Switchyard Control Computer”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1066-1071.
[n] J. L. Callas, “Spirit and Opportunity: The Great Surface Exploration of Mars Keeps Going”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOAA01, pp. 46-46.
[n] D. F. Cosgrove, R. P. Johnson, and S. C. Snowdon, “A Pulsed Setpum Magnet for Extraction from the Fermilab Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1263-1266.
[n] J. Li, Z. Zhang, X. Xu, and J. Qiao, “The RF-System for A High Current RFQ at IHEP”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP47, pp. 712-714.
[n] F. Zhou, Y. K. Batygin, W. Liu, Y. Nosochkov, J. Sheppard, and M. Woodley, “Transport Optics Design and Multi-particle Tracking for the ILC Positron Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS060, pp. 3124-3126.
[n] C. A. Frost, D. E. Hasti, J. M. Jojola, E. E. Jones, G. T. Leifeste, and J. W. Poukey, “High Brightness Immersed Source Injector Characterization”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1456-1459.
[n] A. Facco, “Low and Medium Beta Superconducting Cavities”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEYCH03, pp. 142-146.
[n] P. Kuske, M. Abo-Bakr, W. Anders, and G. Wuestefeld, “Bunch Length Measurements at BESSY”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB005, pp. 3020-3022.
[n] A. V. Feschenko, “Methods and Instrumentation for Bunch Shape Measurements”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAB002, pp. 517-521.
For LaTeX
Use Complete Form
For BibTeX
References
- S. R. Farrell and W. J. Gallagher, “Further Notes on the Multipactor Effect”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2900-2903.
- S. Pissanetzky and W. Schmidt, “Design of the Dipole Magnet for the C" Version of the Superconducting Supercollider 20 TeV Twin-Beam Proton Accelerator (SSC)"”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3740-3743.
- D. J. MacNair, “Digitally Controlled High Availability Power Supply”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP021, pp. 437-439.
- J. Poate and M. I. Current, “Industrial Applications of Ion Implantation for Doping and Modification of Semiconductor Materials”, presented at the 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAA008, unpublished.
- C. Xu, S. A. Belomestnykh, I. Ben-Zvi, and W. Xu, “Second Harmonic Cavity Design for Synchrotron Radiation Energy Compensator in eRHIC Project”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB002, pp. 1052-1055.
- C. Carli and M. Chanel, “Transverse Electron Cooling - From the Time Evolution of the Profiles to Drift Velocities of the Oscillation Amplitudes”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6B05, pp. 1235-1237.
- P. Emma, Z. Huang, and J. Wu, “Weak FEL Gain Detection with a Modulated Laser-Based Beam Heater”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT040, pp. 2636-2638.
- Ye. Fomin, “Machine Learning for the Storage Ring Optimization”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 169-171.
- G. Rakowsky, “RF Accelerating Cavities for AGS Conversion”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 315-320.
- D. Berkaev, O. Belikov, V. Kozak, P. Shatunov, and A. Medvedko, “SYSTEM OF POWER SUPPLY RIPPLES MEASUREMENT FOR VEPP-2000 COLLIDER”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH12, pp. XX-XX.
- P. J. Bendt, B. H. Erkkila, and R. H. Stokes, “Design and Measured Characteristics of Minimum Loss Low-Velocity Helix Resonators”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 185-188.
- N. Terunuma, “KEK ATF Beam Instrumentation Program”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEODN2, pp. 1480-1484.
- G. Mishra, M. Gehlot, R. Khullar, and B. Chilukamarri, “Progress in development and measurement of an asymmetric magnet pole undulator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM101, pp. 3801-3803.
- F. R. Ullrich, “Temperature Stabilisation of the Accelerating Structure”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP55, pp. 791-793.
- S. K. Howry, M. Hu, D. Neet, R. Scholl, and E. J. Seppi, “The SLAC Beam Switchyard Control Computer”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1066-1071.
- J. L. Callas, “Spirit and Opportunity: The Great Surface Exploration of Mars Keeps Going”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOAA01, pp. 46-46.
- D. F. Cosgrove, R. P. Johnson, and S. C. Snowdon, “A Pulsed Setpum Magnet for Extraction from the Fermilab Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1263-1266.
- J. Li, Z. Zhang, X. Xu, and J. Qiao, “The RF-System for A High Current RFQ at IHEP”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP47, pp. 712-714.
- F. Zhou, Y. K. Batygin, W. Liu, Y. Nosochkov, J. Sheppard, and M. Woodley, “Transport Optics Design and Multi-particle Tracking for the ILC Positron Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS060, pp. 3124-3126.
- C. A. Frost, D. E. Hasti, J. M. Jojola, E. E. Jones, G. T. Leifeste, and J. W. Poukey, “High Brightness Immersed Source Injector Characterization”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1456-1459.
- A. Facco, “Low and Medium Beta Superconducting Cavities”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEYCH03, pp. 142-146.
- P. Kuske, M. Abo-Bakr, W. Anders, and G. Wuestefeld, “Bunch Length Measurements at BESSY”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB005, pp. 3020-3022.
- A. V. Feschenko, “Methods and Instrumentation for Bunch Shape Measurements”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAB002, pp. 517-521.
Back to search