Favourites
For Word
[n] E. Kako et al., “High Power RF Tests on Input Couplers for 972MHz Superconducting Cavities in the J-PARC Project”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB062, pp. 1338-1340.
[n] D. W. Sprehn, A. A. Haase, A. Jensen, E. N. Jongewaard, and D. W. Martin, “Test and Development of a 10 MW 1.3 GHz Sheet Beam Klystron for the ILC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB066, pp. 4023-4025.
[n] A. Kolomiets and A. S. Plastun, “RFQ With Improved Energy Gain”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB016, pp. 41-43.
[n] L. Malina and J. M. Coello de Portugal, “Optics Measurements in Storage Rings Based on Simultaneous 3-Dimensional Beam Excitation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3068-3071. doi:10.18429/JACoW-IPAC2018-THPAF046
[n] H. Weise, “Operational Experience with The Test Facilities for TESLA”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH201, pp. 577-581.
[n] P. Pierini et al., “Preparation of the 3.9 GHz System for the European XFEL Injector Commissioning”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB018, pp. 584-588.
[n] M. V. Fazio, H. P. Johnson, and D. M. Riggin, “Developments of the RF System for the Fusion Materials Irradiation Test Accelerator”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S6-6, pp. 356-359.
[n] F. A. Emanov, D. Bolkhovityanov, P. B. Cheblakov, and Ya. V. Pisarev, “Present Status of VEPP-5 Injection Complex IT Infrastructure”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 429-431. doi:10.18429/JACoW-RUPAC2018-THPSC11
[n] P. Cameron et al., “The RHIC Ionization Beam Profile Monitor”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA101, pp. 2114-2116.
[n] J. H. Yue, Y. Li, Z. J. Ma, Y. Xie, and L. Yu, “The Measurement and Controlling System of Beam Current for Weak Current Accelerator”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 697-699. doi:10.18429/JACoW-IBIC2016-WEPG33
[n] P. T. Spampinato et al., “A Free Hg Jet System for Use in a High-Power Target Experiment”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE073, pp. 3895-3897.
[n] J. H. Lancaster, “Design and Construction of Physical Facilities, AGS Conversion Project”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 174-176.
[n] V. Gubin, J. Y. Kim, J.-W. Kim, Y. H. Park, Yu. Maltseva, and P. V. Martyshkin, “High-Power High-Temperature Graphite Beam Dump for E-Beam Irradiation Test of Prototype IF Target in RISP”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 632-634. doi:10.18429/JACoW-RUPAC2016-THPSC046
[n] S. Jolly, L. C. Deacon, J. A. Goodhand, S. R. Mandry, and M. Wing, “A Spectrometer for Proton Driven Plasma Wakefield Accelerated Electrons at AWAKE”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1540-1543. doi:10.18429/JACoW-IPAC2014-TUPME079
[n] H. Weise, “High Gradient Superconducting RF Structures”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper WE1002, pp. 674-678.
[n] H. Kamitsubo et al., “A Proposed Multi-Purpose Separated-Sector Cyclotron at IPCR”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-07, pp. 2070-2073.
[n] G. Sattonnay et al., “Is it Possible to Use Additive Manufacturing for Accelerator UHV Beam Pipes?”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2240-2243. doi:10.18429/JACoW-IPAC2019-WEXXPLS3
[n] M. Vretenar et al., “Linear Accelerator Designs for the Upgrade of the CERN Proton Injector Complex (Linac4, SPL)”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THXMA02, pp. 529-533.
[n] S. D?Âbert et al., “Beam Diagnostics using Transition Radiation”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F33, pp. 719-722.
[n] N. S. Dikansky, A. V. Novokhatski, V. V. Parkhomchuk, Yu. M. Shatunov, and A. N. Skrinsky, “Status of the VEPP-5 Complex”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 482-485.
[n] M. A. Leitner et al., “Design Choices for the Integrated Beam Experiment (IBX)”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG040, pp. 1521-1523.
[n] P. S. D. Chuang et al., “Development of Multi-channel Line for the NSRRC Cryogenic System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1212-1214. doi:10.18429/JACoW-IPAC2016-TUPMB050
[n] A. Jackson, E. Forest, H. Nishimura, and M. S. Zisman, “The Effects of Insertion Devices on Beam Dynamics in the ALS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1752-1755.
[n] A. Jackson and H. Nishimura, “Single Particle Dynamics in the LBL 1-2 GeV Synchrotron Radiation Source in the Presence of Magnetic Imperfections, Magnet Displacement Errors and Insertion Devices”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 482-485.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Kako et al., “High Power RF Tests on Input Couplers for 972MHz Superconducting Cavities in the J-PARC Project”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB062, pp. 1338-1340.
- D. W. Sprehn, A. A. Haase, A. Jensen, E. N. Jongewaard, and D. W. Martin, “Test and Development of a 10 MW 1.3 GHz Sheet Beam Klystron for the ILC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB066, pp. 4023-4025.
- A. Kolomiets and A. S. Plastun, “RFQ With Improved Energy Gain”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB016, pp. 41-43.
- L. Malina and J. M. Coello de Portugal, “Optics Measurements in Storage Rings Based on Simultaneous 3-Dimensional Beam Excitation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3068-3071.
- H. Weise, “Operational Experience with The Test Facilities for TESLA”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH201, pp. 577-581.
- P. Pierini et al., “Preparation of the 3.9 GHz System for the European XFEL Injector Commissioning”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB018, pp. 584-588.
- M. V. Fazio, H. P. Johnson, and D. M. Riggin, “Developments of the RF System for the Fusion Materials Irradiation Test Accelerator”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S6-6, pp. 356-359.
- F. A. Emanov, D. Bolkhovityanov, P. B. Cheblakov, and Ya. V. Pisarev, “Present Status of VEPP-5 Injection Complex IT Infrastructure”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 429-431.
- P. Cameron et al., “The RHIC Ionization Beam Profile Monitor”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA101, pp. 2114-2116.
- J. H. Yue, Y. Li, Z. J. Ma, Y. Xie, and L. Yu, “The Measurement and Controlling System of Beam Current for Weak Current Accelerator”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 697-699.
- P. T. Spampinato et al., “A Free Hg Jet System for Use in a High-Power Target Experiment”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE073, pp. 3895-3897.
- J. H. Lancaster, “Design and Construction of Physical Facilities, AGS Conversion Project”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 174-176.
- V. Gubin, J. Y. Kim, J.-W. Kim, Y. H. Park, Yu. Maltseva, and P. V. Martyshkin, “High-Power High-Temperature Graphite Beam Dump for E-Beam Irradiation Test of Prototype IF Target in RISP”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 632-634.
- S. Jolly, L. C. Deacon, J. A. Goodhand, S. R. Mandry, and M. Wing, “A Spectrometer for Proton Driven Plasma Wakefield Accelerated Electrons at AWAKE”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1540-1543.
- H. Weise, “High Gradient Superconducting RF Structures”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper WE1002, pp. 674-678.
- H. Kamitsubo et al., “A Proposed Multi-Purpose Separated-Sector Cyclotron at IPCR”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper C-07, pp. 2070-2073.
- G. Sattonnay et al., “Is it Possible to Use Additive Manufacturing for Accelerator UHV Beam Pipes?”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2240-2243.
- M. Vretenar et al., “Linear Accelerator Designs for the Upgrade of the CERN Proton Injector Complex (Linac4, SPL)”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THXMA02, pp. 529-533.
- S. D?Âbert et al., “Beam Diagnostics using Transition Radiation”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F33, pp. 719-722.
- N. S. Dikansky, A. V. Novokhatski, V. V. Parkhomchuk, Yu. M. Shatunov, and A. N. Skrinsky, “Status of the VEPP-5 Complex”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 482-485.
- M. A. Leitner et al., “Design Choices for the Integrated Beam Experiment (IBX)”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG040, pp. 1521-1523.
- P. S. D. Chuang et al., “Development of Multi-channel Line for the NSRRC Cryogenic System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1212-1214.
- A. Jackson, E. Forest, H. Nishimura, and M. S. Zisman, “The Effects of Insertion Devices on Beam Dynamics in the ALS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1752-1755.
- A. Jackson and H. Nishimura, “Single Particle Dynamics in the LBL 1-2 GeV Synchrotron Radiation Source in the Presence of Magnetic Imperfections, Magnet Displacement Errors and Insertion Devices”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 482-485.
Back to search