Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. J. Van Arsdall, R. Bryant, R. Carey, D. Casavant, L. Lagin, and R. Patterson, “Status of the National Ignition Facility and Control System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O1_002.
[n] C. Schlemper, X. Jiang, and M. Vogel, “Next Generation of SRF-Guns: Low Secondary Electron Yield Based on a Thin Film Approach”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB047, pp. 673-677.
[n] M. Brightwell, M. Br?ñger, A. Lang, and A. Suwalska, “A Customizable Platform for High-availability Monitoring, Control and Data Distribution at CERN”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS037, pp. 418-421.
[n] M. A. Gordon, Y. K. Kim, and J. M. Maxson, “The Effects of Stochastic Space Charge in High Brightness Photolectron Beamlines for Ultrafast Electron Diffraction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3283-3285. doi:10.18429/JACoW-IPAC2019-WEPTS069
[n] A. R. D. Rodrigues and C. Scorzato, “LNLS Interlock System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP073L, pp. 2627-2628.
[n] K. Zagar et al., “ACS - Overview of Technical Features”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP704, pp. XX-XX.
[n] H. H. Slepicka and M. L. Gibbs, “PyDM - Extension Points”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 540. doi:10.18429/JACoW-ICALEPCS2019-MOPHA135
[n] S. I. Kukarnikov et al., “Design of Dedicated Proton Synchrotron for PRAgue Radiation Oncology Center”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP08A, pp. 532-534.
[n] P. Musumeci, J. Moody, J. B. Rosenzweig, and C. M. Scoby, “Experimental Generation and Characterization of Uniformly Filled Ellipsoidal Electron Beam Distributions”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP075, pp. 724-726.
[n] W. Radloff and W. Kriens, “Fast Lifetime Measurements of Stored e/e- Single Bunches in PETRA and DORIS II Utilizing the AC-Signals of Simple Beam Current Transformers”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2193-2196.
[n] W. Blokland, A. V. Liyu, C. D. Long, D. J. Murphy, J. D. Purcell, and M. Sundaram, “Dynamic Visualization of SNS Diagnostics Summary Report and System Status”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT014, pp. 1395-1397.
[n] V. C. Kempson, J. A. Dobbing, C. E. Hansen, N. Hauge, and G. Hilleke, “Pulsed Magnets and Pulser Units for the Booster and Storage Ring of the Diamond Light Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS028, pp. 3341-3343.
[n] G. Decker, P. K. Den Hartog, G. Rosenbaum, and O. Singh, “Progress toward a Hard X-ray Insertion Device Beam Position Monitor at the Advanced Photon Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN106, pp. 4342-4344.
[n] J. Heim et al., “Wiggler Insertion of the PEP-II B-Factory LER”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA03, pp. 527-529.
[n] D. Liska, S. J. Black, J. N. DiMarco, J. Ledford, and G. Spalek, “Design Features of a Seven-Cell High-Gradient Superconducting Cavity”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-43, pp. 163-165.
[n] C. Pira et al., “Impact of the Cu Substrate Surface Preparation on the Morphological, Superconductive and RF Properties of the Nb Superconductive Coatings”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 935-940. doi:10.18429/JACoW-SRF2019-THP041
[n] C. D. Long, W. Blokland, D. J. Murphy, J. Pogge, J. D. Purcell, and M. Sundaram, “SNS Diagnostics Timing Integration”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP048, pp. 3001-3003.
[n] L. Dallin, I. Blomqvist, D. Lowe, M. Silzer, and M. de Jong, “The Canadian Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPA001, pp. 220-223.
[n] T. Sipahi, S. Biedron, S. V. Milton, J. Hylen, and R. M. Zwaska, “Simulations of High Current Magnetic Horn Striplines at Fermilab”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 792-795. doi:10.18429/JACoW-NAPAC2016-WEPOA43
[n] A. Ratti et al., “The SNS RFQ Commissioning”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU412, pp. 329-331.
[n] W. Barry, J. Corlett, M. Fahmie, J. Greer, G. Lambertson, and C. Pike, “Status of the PEP-II Transverse Feedback Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P046, pp. 2344-2346.
[n] A. H. Lumpkin, W. M. Fawley, and D. W. Rule, “A Concept for z-Dependent Microbunching Measurements with Coherent X-ray Transition Radiation in a SASE FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS48, pp. XX-XX.
[n] N. R. Lobanov, P. Linardakis, D. Tsifakis, and T. Tunningley, “Ultra High Impedance Diagnostics of Electrostatic Accelerators with Improved Resolution”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper THM2C01, pp. 282-284.
[n] D. F. Sutter and B. P. Strauss, “Techology Transfer - When, Why, Issues and Advantages”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOZAC01, pp. 110-114.
[n] N. Solyak, V. Ivanov, C. S. Mishra, and K. Ranjan, “Studies of Emittance Bumps and Adaptive Alignment method for ILC Main Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEOBAB02, pp. 1973-1973.
[n] M. E. Gruchalla et al., “Beam Profile Wire-Scanner/Halo-Scraper Sensor Analog Interface Electronics”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH098, pp. 2314-2316.
[n] A. Yu. Molodozhentsev and A. I. Sidorov, “Beam Injection System for the PRAgue MEdical Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP33C, pp. 2140-2142.
[n] L. M. Zheng, Y.-C. Du, and C.-X. Tang, “Simulation Study of Dark Current in the Thomson Scattering X-Ray Source”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper WEPH07, pp. 38-40.
[n] G. Kalisch, K. Beckert, B. Franzke, I. Hofmann, and U. Schaaf, “Longitudinal Space Charge Effects in Cooled Bunched Beams”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 780-783.
[n] M. C. Rocha et al., “High Rigidity Girder System for the Sirius Machine”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 261-263. doi:10.18429/JACoW-MEDSI2018-WEPH26
[n] C. Meng, H. T. Jing, Y. P. Song, J. Y. Tang, and H. Wang, “Abandoned Proton Beam Separation Design at MOMENT”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1001-1003. doi:10.18429/JACoW-IPAC2018-TUPAK017
[n] J. C. Guzman, “Preliminary Design of the Australian SKA Pathfinder (ASKAP) Telescope Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUD001, pp. 343-345.
[n] M. Awschalom, L. Grumboski, A. F. Hrejsa, G. M. Lee, and I. Rosenberg, “The Fermilab Cancer Therapy Facility: Status Report After 2.5 Years of Operation”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3068-3071.
[n] L. Hoummi, A. Loulergue, R. Nagaoka, J. Resta-L??pez, and C. P. Welsch, “Beam Dynamics in MBA Lattices with Different Chromaticity Correction Schemes”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 346-349. doi:10.18429/JACoW-IPAC2019-MOPGW096
[n] M. Mouat, E. Klassen, K. S. Lee, J. J. Pon, and P. J. Yogendran, “Update On The Central Control System of TRIUMF's 500 MeV Cyclotron”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU018, pp. 469-472.
[n] M. P. Martinez, J. D. Purcell, and E. Danilova, “The Electrical Power Project at SNS”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA13, pp. 544-546.
[n] S. Gayadeen and G. Rehm, “Performance of the Fast Orbit Feedback System with the Double-Double Bend Achromat Installed in Diamond Light Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1989-1991. doi:10.18429/JACoW-IPAC2017-TUPIK113
[n] S. V. Kuzikov, J. L. Hirshfield, S. Kazakov, and M. E. Plotkin, “High-gradient Multi-mode Two-beam Accelerating Structure”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP133, pp. 2806-2808.
[n] C.-J. Jing, W. Gai, S. H. Gold, A. K. Kinkead, R. Konecny, and J. G. Power, “Progress on High Power Tests of Dielectric-Loaded Accelerating Structures”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE017, pp. 1566-1568.
[n] T. Lensch and M. Werner, “Machine Protection System for PETRA III”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD25, pp. 351-353.
[n] Y. Xu, A. Facco, M. J. Johnson, S. J. Miller, and J. Popielarski, “Electromagnetic Optimization of the FRIB 322 MHz =0.29 Half Wave Resonator”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO046, pp. 200-202.
[n] T. E. Plawski and C. Hovater, “RF System Modeling for the CEBAF Energy Upgrade”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP101, pp. 2252-2254.
[n] K. Sakaue, A. Endo, and M. Washio, “Design of High Brightness Light Source based on Laser-Compton Undulator for EUV Lithography Mask Inspection”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA036, pp. 148-150.
[n] F. D. Dziuba, M. Busch, H. Klein, H. Podlech, U. Ratzinger, and C. Zhang, “Development of Superconducting CH-Cavities for the EUROTRANS Injector Linac”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO017, pp. 578-581.
[n] O. I. Meshkov et al., “The Upgraded Optical Diagnostic of the VEPP-4M Collider”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT109, pp. 2739-2741.
[n] K. Kostro, J. Andersson, F. Di Maio, S. Jensen, and N. Trofimov, “The Controls Middleware (CMW) at CERN - Status and Usage”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE201, pp. XX-XX.
[n] C. T. M. Chang, J. W. Dawson, and R. L. Kustom, “A Dielectric Loaded Slow Wave Structure for Seapration of Relativistic Particles”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 526-531.
[n] J. L. Li, P. Piot, and R. Tikhoplav, “Production of Transverse Controllable Laser Density Distribution in Fermilab/NICADD Photoinjector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP043, pp. 2783-2785.
[n] M. Böge and T. Limberg, “Calculations on Depolarization in HERA due to Beam-Beam Effects”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAP08, pp. 2901-2903.
[n] H. Aksakal, A. K. Ciftci, D. Schulte, and F. Zimmermann, “Photon-Nucleon Collider Based on LHC and CLIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP010, pp. 1207-1209.
[n] H. Damerau, S. Hancock, and M. Schokker, “Recent Improvements of the RF Beam Control for LHC-type Beams in the CERN PS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB015, pp. 2716-2718.
[n] I. Yu. Vakhrushin et al., “UEL-10-D New Linear Electron Accelerator for Non-Destructive Testing”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC029, pp. 382-383.
[n] D. Proch, D. Reschke, B. G??nther, G. M??ller, and D. Werner, “Dry Ice Cleaning for SRF Applications”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT005, pp. XX-XX.
[n] D. R. Ramos, D. Chauville, J. Knaster, and R. Veness, “Cold Beam Vacuum Interconnects for the LHC Insertion Regions”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT027, pp. 599-601.
[n] T. Lensch, S. Liu, and M. Scholz, “The European XFEL Wire Scanner System”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 498-500. doi:10.18429/JACoW-IBIC2018-WEPC05
[n] T. Sugimura et al., “Development of C-Band Accelerator Structure with Smooth Shape Couplers”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT038, pp. 2530-2532.
[n] J.-M. Godefroy, J. Polian, F. Ribeiro, and T. Ruan, “MOSFET RF Power Amplifier for Accelerator Applications”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP04A, pp. 1811-1813.
[n] E. Pozdeyev, A. Kayran, and V. Litvinenko, “Ion Bombardment in RF Photoguns”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP050, pp. 473-475.
[n] S. K. Dutt, A. W. Chao, D. E. Johnson, T. Sen, and Y. T. Yan, “Dynamic Aperture and Extraction Studies for the SSC High Energy Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 360-363.
For LaTeX
Use Complete Form
For BibTeX
References
- P. J. Van Arsdall, R. Bryant, R. Carey, D. Casavant, L. Lagin, and R. Patterson, “Status of the National Ignition Facility and Control System”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O1_002.
- C. Schlemper, X. Jiang, and M. Vogel, “Next Generation of SRF-Guns: Low Secondary Electron Yield Based on a Thin Film Approach”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB047, pp. 673-677.
- M. Brightwell, M. Br?ñger, A. Lang, and A. Suwalska, “A Customizable Platform for High-availability Monitoring, Control and Data Distribution at CERN”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS037, pp. 418-421.
- M. A. Gordon, Y. K. Kim, and J. M. Maxson, “The Effects of Stochastic Space Charge in High Brightness Photolectron Beamlines for Ultrafast Electron Diffraction”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3283-3285.
- A. R. D. Rodrigues and C. Scorzato, “LNLS Interlock System”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP073L, pp. 2627-2628.
- K. Zagar et al., “ACS - Overview of Technical Features”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP704, pp. XX-XX.
- H. H. Slepicka and M. L. Gibbs, “PyDM - Extension Points”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 540.
- S. I. Kukarnikov et al., “Design of Dedicated Proton Synchrotron for PRAgue Radiation Oncology Center”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP08A, pp. 532-534.
- P. Musumeci, J. Moody, J. B. Rosenzweig, and C. M. Scoby, “Experimental Generation and Characterization of Uniformly Filled Ellipsoidal Electron Beam Distributions”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP075, pp. 724-726.
- W. Radloff and W. Kriens, “Fast Lifetime Measurements of Stored e/e- Single Bunches in PETRA and DORIS II Utilizing the AC-Signals of Simple Beam Current Transformers”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2193-2196.
- W. Blokland, A. V. Liyu, C. D. Long, D. J. Murphy, J. D. Purcell, and M. Sundaram, “Dynamic Visualization of SNS Diagnostics Summary Report and System Status”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT014, pp. 1395-1397.
- V. C. Kempson, J. A. Dobbing, C. E. Hansen, N. Hauge, and G. Hilleke, “Pulsed Magnets and Pulser Units for the Booster and Storage Ring of the Diamond Light Source”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS028, pp. 3341-3343.
- G. Decker, P. K. Den Hartog, G. Rosenbaum, and O. Singh, “Progress toward a Hard X-ray Insertion Device Beam Position Monitor at the Advanced Photon Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN106, pp. 4342-4344.
- J. Heim et al., “Wiggler Insertion of the PEP-II B-Factory LER”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA03, pp. 527-529.
- D. Liska, S. J. Black, J. N. DiMarco, J. Ledford, and G. Spalek, “Design Features of a Seven-Cell High-Gradient Superconducting Cavity”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-43, pp. 163-165.
- C. Pira et al., “Impact of the Cu Substrate Surface Preparation on the Morphological, Superconductive and RF Properties of the Nb Superconductive Coatings”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 935-940.
- C. D. Long, W. Blokland, D. J. Murphy, J. Pogge, J. D. Purcell, and M. Sundaram, “SNS Diagnostics Timing Integration”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP048, pp. 3001-3003.
- L. Dallin, I. Blomqvist, D. Lowe, M. Silzer, and M. de Jong, “The Canadian Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPA001, pp. 220-223.
- T. Sipahi, S. Biedron, S. V. Milton, J. Hylen, and R. M. Zwaska, “Simulations of High Current Magnetic Horn Striplines at Fermilab”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 792-795.
- A. Ratti et al., “The SNS RFQ Commissioning”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU412, pp. 329-331.
- W. Barry, J. Corlett, M. Fahmie, J. Greer, G. Lambertson, and C. Pike, “Status of the PEP-II Transverse Feedback Systems”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P046, pp. 2344-2346.
- A. H. Lumpkin, W. M. Fawley, and D. W. Rule, “A Concept for z-Dependent Microbunching Measurements with Coherent X-ray Transition Radiation in a SASE FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS48, pp. XX-XX.
- N. R. Lobanov, P. Linardakis, D. Tsifakis, and T. Tunningley, “Ultra High Impedance Diagnostics of Electrostatic Accelerators with Improved Resolution”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper THM2C01, pp. 282-284.
- D. F. Sutter and B. P. Strauss, “Techology Transfer - When, Why, Issues and Advantages”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOZAC01, pp. 110-114.
- N. Solyak, V. Ivanov, C. S. Mishra, and K. Ranjan, “Studies of Emittance Bumps and Adaptive Alignment method for ILC Main Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEOBAB02, pp. 1973-1973.
- M. E. Gruchalla et al., “Beam Profile Wire-Scanner/Halo-Scraper Sensor Analog Interface Electronics”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH098, pp. 2314-2316.
- A. Yu. Molodozhentsev and A. I. Sidorov, “Beam Injection System for the PRAgue MEdical Synchrotron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP33C, pp. 2140-2142.
- L. M. Zheng, Y.-C. Du, and C.-X. Tang, “Simulation Study of Dark Current in the Thomson Scattering X-Ray Source”, in Proc. 12th Symposium on Accelerator Physics (SAP'14), Lanzhou, China, Aug. 2014, paper WEPH07, pp. 38-40.
- G. Kalisch, K. Beckert, B. Franzke, I. Hofmann, and U. Schaaf, “Longitudinal Space Charge Effects in Cooled Bunched Beams”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 780-783.
- M. C. Rocha et al., “High Rigidity Girder System for the Sirius Machine”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 261-263.
- C. Meng, H. T. Jing, Y. P. Song, J. Y. Tang, and H. Wang, “Abandoned Proton Beam Separation Design at MOMENT”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1001-1003.
- J. C. Guzman, “Preliminary Design of the Australian SKA Pathfinder (ASKAP) Telescope Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUD001, pp. 343-345.
- M. Awschalom, L. Grumboski, A. F. Hrejsa, G. M. Lee, and I. Rosenberg, “The Fermilab Cancer Therapy Facility: Status Report After 2.5 Years of Operation”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3068-3071.
- L. Hoummi, A. Loulergue, R. Nagaoka, J. Resta-L??pez, and C. P. Welsch, “Beam Dynamics in MBA Lattices with Different Chromaticity Correction Schemes”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 346-349.
- M. Mouat, E. Klassen, K. S. Lee, J. J. Pon, and P. J. Yogendran, “Update On The Central Control System of TRIUMF's 500 MeV Cyclotron”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU018, pp. 469-472.
- M. P. Martinez, J. D. Purcell, and E. Danilova, “The Electrical Power Project at SNS”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA13, pp. 544-546.
- S. Gayadeen and G. Rehm, “Performance of the Fast Orbit Feedback System with the Double-Double Bend Achromat Installed in Diamond Light Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1989-1991.
- S. V. Kuzikov, J. L. Hirshfield, S. Kazakov, and M. E. Plotkin, “High-gradient Multi-mode Two-beam Accelerating Structure”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP133, pp. 2806-2808.
- C.-J. Jing, W. Gai, S. H. Gold, A. K. Kinkead, R. Konecny, and J. G. Power, “Progress on High Power Tests of Dielectric-Loaded Accelerating Structures”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE017, pp. 1566-1568.
- T. Lensch and M. Werner, “Machine Protection System for PETRA III”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD25, pp. 351-353.
- Y. Xu, A. Facco, M. J. Johnson, S. J. Miller, and J. Popielarski, “Electromagnetic Optimization of the FRIB 322 MHz =0.29 Half Wave Resonator”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO046, pp. 200-202.
- T. E. Plawski and C. Hovater, “RF System Modeling for the CEBAF Energy Upgrade”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP101, pp. 2252-2254.
- K. Sakaue, A. Endo, and M. Washio, “Design of High Brightness Light Source based on Laser-Compton Undulator for EUV Lithography Mask Inspection”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA036, pp. 148-150.
- F. D. Dziuba, M. Busch, H. Klein, H. Podlech, U. Ratzinger, and C. Zhang, “Development of Superconducting CH-Cavities for the EUROTRANS Injector Linac”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO017, pp. 578-581.
- O. I. Meshkov et al., “The Upgraded Optical Diagnostic of the VEPP-4M Collider”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT109, pp. 2739-2741.
- K. Kostro, J. Andersson, F. Di Maio, S. Jensen, and N. Trofimov, “The Controls Middleware (CMW) at CERN - Status and Usage”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE201, pp. XX-XX.
- C. T. M. Chang, J. W. Dawson, and R. L. Kustom, “A Dielectric Loaded Slow Wave Structure for Seapration of Relativistic Particles”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 526-531.
- J. L. Li, P. Piot, and R. Tikhoplav, “Production of Transverse Controllable Laser Density Distribution in Fermilab/NICADD Photoinjector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP043, pp. 2783-2785.
- M. Böge and T. Limberg, “Calculations on Depolarization in HERA due to Beam-Beam Effects”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAP08, pp. 2901-2903.
- H. Aksakal, A. K. Ciftci, D. Schulte, and F. Zimmermann, “Photon-Nucleon Collider Based on LHC and CLIC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP010, pp. 1207-1209.
- H. Damerau, S. Hancock, and M. Schokker, “Recent Improvements of the RF Beam Control for LHC-type Beams in the CERN PS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB015, pp. 2716-2718.
- I. Yu. Vakhrushin et al., “UEL-10-D New Linear Electron Accelerator for Non-Destructive Testing”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC029, pp. 382-383.
- D. Proch, D. Reschke, B. G??nther, G. M??ller, and D. Werner, “Dry Ice Cleaning for SRF Applications”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT005, pp. XX-XX.
- D. R. Ramos, D. Chauville, J. Knaster, and R. Veness, “Cold Beam Vacuum Interconnects for the LHC Insertion Regions”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT027, pp. 599-601.
- T. Lensch, S. Liu, and M. Scholz, “The European XFEL Wire Scanner System”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 498-500.
- T. Sugimura et al., “Development of C-Band Accelerator Structure with Smooth Shape Couplers”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT038, pp. 2530-2532.
- J.-M. Godefroy, J. Polian, F. Ribeiro, and T. Ruan, “MOSFET RF Power Amplifier for Accelerator Applications”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP04A, pp. 1811-1813.
- E. Pozdeyev, A. Kayran, and V. Litvinenko, “Ion Bombardment in RF Photoguns”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP050, pp. 473-475.
- S. K. Dutt, A. W. Chao, D. E. Johnson, T. Sen, and Y. T. Yan, “Dynamic Aperture and Extraction Studies for the SSC High Energy Booster”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 360-363.
Back to search