Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Kaji, M. Hirose, Y. Iitsuka, and T. Obina, “Archive System of Beam Injection Information at SuperKEKB”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2550-2553. doi:10.18429/JACoW-IPAC2019-WEPGW036
[n] J. H. B. Madsen et al., “Status Report on the LEP Pre-Injector (LPI) and the Proton Synchrotron (PS) as A e e - Accelerator”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 386-389.
[n] J. Dey and J. M. Steimel, “Improving the Linearity of Ferrite Loaded Cavities Using Feedback”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH046, pp. 873-875.
[n] M. Fujieda et al., “A New Type of RF Cavity For High Intensity Proton Synchrotron Using High Permeability Magnetic Alloy”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THOB03B, pp. 299-301.
[n] H. K. Sayed, S. A. Bogacz, and Y. Roblin, “Correction of the Chromaticity up to Second Order for MEIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB045, pp. 1629-1631.
[n] N. A. Huque et al., “BNL 56 MHz HOM Damper Fabrication at JLab”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB063, pp. 1262-1266.
[n] M. Svandrlik et al., “Elettra New Full Energy Injector Status Report”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS033, pp. 3356-3358.
[n] K. Asano, T. Furuya, S. Mitsunobu, T. Tajima, and T. Takahashi, “Stable Performance of 508 MHz Superconducting RF Cavities for KEKB”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C11, pp. 419-423.
[n] H. K. Sayed, S. A. Bogacz, and P. Chevtsov, “Spin Rotator Optics for MEIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB044, pp. 1626-1628.
[n] J. R. Nelson et al., “National Ignition Facility (NIF) Dilation X-ray Imager (DIXI) Diagnostic Instrumentation and Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC073, pp. 751-754.
[n] L. J. Lagin et al., “The Overview of the National Ignition Facility Distributed Computer Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP001, pp. XX-XX.
[n] J. Dey, I. Kourbanis, and J. Steimel, “2.5 MHz Feedforward Beam Loading Compensation in the Fermilab Main Injector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB030, pp. 3356-3358.
[n] N. Yamamoto, M. Hosaka, A. Mano, T. Takano, Y. Takashima, and M. Katoh, “Design Study of Pulsed Multipole Injection for Aichi SR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1962-1964. doi:10.18429/JACoW-IPAC2014-WEPRO011
[n] S. Belomestnykh et al., “Commissioning of the Superconducting RF Cavities for the CESR Luminosity Upgrade”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP135, pp. 980-982.
[n] T. Sloan and T. Miller, “Design Considerations of the IUCF Cooler Dipole Magnet Vacuum Can”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B35, pp. 145-146.
[n] D. Anderson et al., “Testing Quality and Metrics for the LHC Magnet Powering System throughout Past and Future Commissioning”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3995-3997. doi:10.18429/JACoW-IPAC2014-THPRI095
[n] H. K. Sayed et al., “TOWARDS A GLOBAL OPTIMIZATION OF THE MUON ACCELERATOR FRONT END”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA11, pp. 547-549.
[n] N. A. Huque, M. E. Abdelwhab, E. Daly, and Y. M. Pischalnikov, “Accelerated Life Testing of LCLS-II Cavity Tuner Motor”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB062, pp. 1257-1261.
[n] K. Casarin et al., “Experience with Aluminium Vacuum Chambers at ELETTRA”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP7B09, pp. 2292-2294.
[n] K. Fuchsberger and Y. I. Levinsen, “PYMAD – Integration of MADX in PYTHON”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC119, pp. 2289-2291.
[n] N. Yamamoto et al., “Highly Polarized and High Quantum Efficiency Electron Source Using Transmission-type Photocathode”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEOAB01, pp. 1950-1952.
[n] A. H. Lumpkin, F. Sakamoto, and B. X. Yang, “Dual-Sweep Streak Camera Measurements of the APS User Beams”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT086, pp. 4185-4187.
[n] H. K. Sayed, J. S. Berg, H. G. Kirk, and K. T. McDonald, “Impact of the Initial Proton Bunch Length on the Performance of the Muon Front End”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA10, pp. 544-546.
[n] R. Cappi, N. Garoby, N. Rasmussen, J. P. Riunaud, H. Schoenauer, and K. Schindl, “Upgrading the CERN PS Booster to 1 GeV for Improved Antiproton Production”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1614-1617.
[n] S. Cousineau et al., “Measurement of Space Charge Effect on Transverse Emittance”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH028, pp. 2911-2913.
[n] T. Hays, P. Barnes, H. Padamsee, and J. Sears, “Performance of a High RRR Russian Nb 1.3 GHz TESLA Multicell Cavity”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C15, pp. 441-442.
[n] N. Yamamoto et al., “Accelerators of the Central Japan Synchrotron Radiation Research Facility Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA036, pp. 2567-2569.
[n] J. C. Garnier et al., “Reliable Software Development for Machine Protection Systems”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 489-491. doi:10.18429/JACoW-IPAC2014-MOPME050
[n] Y. Sato et al., “Push-Pull Amplifier for MA-Loaded Cavity”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D008, pp. 396-398.
[n] A. Koschik et al., “Optics Flexibility and Dispersion Matching at Injection into the LHC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS014, pp. 1517-1519.
[n] X. J. Wang and H. G. Kirk, “The Brookhaven ATF Low-Emittance Beam Line”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 604-607.
[n] J. Dey, I. Kourbanis, and D. Wildman, “Improvements in Bunch Coalescing in the Fermilab Main Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ13, pp. 3312-3314.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Kaji, M. Hirose, Y. Iitsuka, and T. Obina, “Archive System of Beam Injection Information at SuperKEKB”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2550-2553.
- J. H. B. Madsen et al., “Status Report on the LEP Pre-Injector (LPI) and the Proton Synchrotron (PS) as A e e - Accelerator”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 386-389.
- J. Dey and J. M. Steimel, “Improving the Linearity of Ferrite Loaded Cavities Using Feedback”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH046, pp. 873-875.
- M. Fujieda et al., “A New Type of RF Cavity For High Intensity Proton Synchrotron Using High Permeability Magnetic Alloy”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THOB03B, pp. 299-301.
- H. K. Sayed, S. A. Bogacz, and Y. Roblin, “Correction of the Chromaticity up to Second Order for MEIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB045, pp. 1629-1631.
- N. A. Huque et al., “BNL 56 MHz HOM Damper Fabrication at JLab”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB063, pp. 1262-1266.
- M. Svandrlik et al., “Elettra New Full Energy Injector Status Report”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS033, pp. 3356-3358.
- K. Asano, T. Furuya, S. Mitsunobu, T. Tajima, and T. Takahashi, “Stable Performance of 508 MHz Superconducting RF Cavities for KEKB”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C11, pp. 419-423.
- H. K. Sayed, S. A. Bogacz, and P. Chevtsov, “Spin Rotator Optics for MEIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB044, pp. 1626-1628.
- J. R. Nelson et al., “National Ignition Facility (NIF) Dilation X-ray Imager (DIXI) Diagnostic Instrumentation and Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC073, pp. 751-754.
- L. J. Lagin et al., “The Overview of the National Ignition Facility Distributed Computer Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP001, pp. XX-XX.
- J. Dey, I. Kourbanis, and J. Steimel, “2.5 MHz Feedforward Beam Loading Compensation in the Fermilab Main Injector”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB030, pp. 3356-3358.
- N. Yamamoto, M. Hosaka, A. Mano, T. Takano, Y. Takashima, and M. Katoh, “Design Study of Pulsed Multipole Injection for Aichi SR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1962-1964.
- S. Belomestnykh et al., “Commissioning of the Superconducting RF Cavities for the CESR Luminosity Upgrade”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP135, pp. 980-982.
- T. Sloan and T. Miller, “Design Considerations of the IUCF Cooler Dipole Magnet Vacuum Can”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B35, pp. 145-146.
- D. Anderson et al., “Testing Quality and Metrics for the LHC Magnet Powering System throughout Past and Future Commissioning”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3995-3997.
- H. K. Sayed et al., “TOWARDS A GLOBAL OPTIMIZATION OF THE MUON ACCELERATOR FRONT END”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA11, pp. 547-549.
- N. A. Huque, M. E. Abdelwhab, E. Daly, and Y. M. Pischalnikov, “Accelerated Life Testing of LCLS-II Cavity Tuner Motor”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB062, pp. 1257-1261.
- K. Casarin et al., “Experience with Aluminium Vacuum Chambers at ELETTRA”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP7B09, pp. 2292-2294.
- K. Fuchsberger and Y. I. Levinsen, “PYMAD – Integration of MADX in PYTHON”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC119, pp. 2289-2291.
- N. Yamamoto et al., “Highly Polarized and High Quantum Efficiency Electron Source Using Transmission-type Photocathode”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEOAB01, pp. 1950-1952.
- A. H. Lumpkin, F. Sakamoto, and B. X. Yang, “Dual-Sweep Streak Camera Measurements of the APS User Beams”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT086, pp. 4185-4187.
- H. K. Sayed, J. S. Berg, H. G. Kirk, and K. T. McDonald, “Impact of the Initial Proton Bunch Length on the Performance of the Muon Front End”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA10, pp. 544-546.
- R. Cappi, N. Garoby, N. Rasmussen, J. P. Riunaud, H. Schoenauer, and K. Schindl, “Upgrading the CERN PS Booster to 1 GeV for Improved Antiproton Production”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1614-1617.
- S. Cousineau et al., “Measurement of Space Charge Effect on Transverse Emittance”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH028, pp. 2911-2913.
- T. Hays, P. Barnes, H. Padamsee, and J. Sears, “Performance of a High RRR Russian Nb 1.3 GHz TESLA Multicell Cavity”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C15, pp. 441-442.
- N. Yamamoto et al., “Accelerators of the Central Japan Synchrotron Radiation Research Facility Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA036, pp. 2567-2569.
- J. C. Garnier et al., “Reliable Software Development for Machine Protection Systems”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 489-491.
- Y. Sato et al., “Push-Pull Amplifier for MA-Loaded Cavity”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D008, pp. 396-398.
- A. Koschik et al., “Optics Flexibility and Dispersion Matching at Injection into the LHC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS014, pp. 1517-1519.
- X. J. Wang and H. G. Kirk, “The Brookhaven ATF Low-Emittance Beam Line”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 604-607.
- J. Dey, I. Kourbanis, and D. Wildman, “Improvements in Bunch Coalescing in the Fermilab Main Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAQ13, pp. 3312-3314.
Back to search